In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field. In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view. What am I missing?
In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field. In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view. What am I missing?
Thanks for chipping in. I discovered something after trying what you suggested. I have quite a few collections of hits by year from Time Life and Billboard. I've eliminated duplicate tracks that appear in both collections (or other CDs for that matter), but cross-reference the CD where I deleted the track and placed in in the comments section of the CD track I retained. If I "search" by song name, only the remaining track appears. But if I want to hear for example Classic Rock 1964, only those tracks remaining would be there when I pull up that CD. So, I type "Classic Rock 1964," in the search field. First the boxes on the right of the screen open up showing album icons. Showing four tracks by album with a button to view 10 more, then four songs with an option to vies 18 more. I finally noticed that at the top of the boxes is a blue band that reads, :Show Classic Rock 1964 in Music. When I double click on this blue band, all 24 tracks from the original CD appear in the song list format even though I had deleted two of them because they appeard in a Beach Boys CD. On those tracks, I had referenced Classic Rock 1964 in the comments field. So, bottom line, Search will also look in the comments field if you click "filter by all" in the magnifying glass to the left of the search field. And you can move all tracks that if finds into a song list by double clicking on the blue band.
Similar Messages
-
Is it possible to move my iTunes from the old laptop to the new one (including all the music files and playlists) without having to start all over again with a blank iTunes?
yes
You will need to copy the whole iTunes folder which is in your user profile on the old computer in Music folder.
Before you do it make sure iTunes are updates on the old computer and it works without any problems.
This will copy all your media, music, movies (provided you did not change the default location).
After the migration you will need to sing in to Apple store again with your Apple ID
and also authorize your new computer (both done from the tom menu bar in Store.
Once you are done please deauthorize your old computer (the same menu path) if you are not planning to use it anymore.
Any problems post here. -
when i click a song in my itunes library it says it cannot find the original file and something told me it was because bonjour was gone off my computer somehow idk please help if anyone even can this is 65.3 gigs of my life
What computer, OS and iTunes version are you using?
-
PE 13 crashes due to incompatible video driver detected. Running on Win 7 SP1 with ATI 540v video card/driver. Deleting bad driver file in adobe program data does not fix the problem, it simply replaces the text file and crashes again. My video driver is just fine. Any help out there?
rb
Your video card driver may be fine for something, but just not compatible with Premiere Elements 13/13.1.
For those with the display card error, the answers include
a. assure your video card/graphics card driver version is up to date according to the web site of the manufacturer of the card -
if necessary consider a driver roll back.
b. determine in Device Manager/Display Adapters if the computer is using 2 cards instead of 1
c. delete the BadDrivers.txt file
the rationale for that deletion is found in post 10 of the following older post...principle applies to 13 as well as 9.
Re: Premiere Elements 9 Tryout Serious Display Problem
Have you looked for computer ATI card settings that might be more compatible with Premiere Elements 13/13.1?
When is the program crashing - just opening a new project or rather crashing if editing a particular video format at the Timeline level?
ATR -
I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help -
I have never backed up my iphone to my itunes because I always used the cloud. However, a few months ago, my wifi disk in my phone burned out so the Apple Store told me to back up everything to my itunes. I am going today to get the iphone 6 so I connected my phone (iphone 4S) to my itunes and I backed up and synced. However, when I look throughout the summary page and click in different areas (Photos, Movies), I don't see any of my data -- it is still asking me to Sync from iPhoto or to sync from another location. By backing up & syncing my phone, did all of my data get saved? Or do I still need to do more steps?
Sorry for the long winded question, I am just so nervous to get a new phone and plug it in to be restored and not have any of my pictures, videos or contacts, etc. Any help would be so so appreciated!Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone -
I converted aif files to mp3 files in iTunes so I could put them on a flash drive. Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive. How do I get the iTunes to only copy the smaller file?
My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
Smart playlists cannot be edited manually, only by changing the rules. You can use them as the basis for another smart playlist though.
There is added overhead to using smart playlists, so don't go overboard. -
I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar
See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware. -
The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck. I am disappointed by the work Apple
It sounds as if AT&T has already told you they can't do what you want. It doensn't sould like anything that's fixable on your end.
-
When I went to update my iPod touch on iTunes, it said unable to update then the iPod shutdown and no longer showed connected in iTunes. I have tried holding down both buttons for up to 3 mins with no luck turning it on, even after a full charge. Help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
When I update itunes it deletes the library file, and when I restore that file from the previous libraries or my backup, itunes will run but tell me "the iTunes library file cannot be saved. A folder was specified instead of a file" How do I fix this?
Hi there Br0x,
You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W. -
I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.
The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac. It will appear in "Finder", which is in your Dock.
Hope this helps -
I just got my iphone and i want to get all my apps and music from my ipod onto my iphone. the only problem is that my itunes is not recognizing my iphone in the devices. in fact there are no devices at all listed. Please help!
See either:
iPhone not recognized in iTunes for Mac
iPhone not recognized in iTunes for Windows -
My husband wiped out the library on his itunes account and replaced it with mine. Any ideas on how to get it back? Our laptop does not have his library either. only mine.
How exactly did this happen? Were you using separate iTunes libraries on separate user accounts on the laptop?
B-rock -
I can only backup the datafiles but not the control files and SPFiles
Hello, all,
I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
1. the ARCHIVELOG is on
2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
Accept the default of 31days
5. go to Schedul Backup
6. select customized from the backup Strategy drop-down menu. Select the Whole Database
7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
8. in the Setting page, select “Disk”
9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
10. just submit the job.
After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=268 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 11:20:54
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
What should I do? Any advice is highly appreciated!
Qianthe string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
I reset these values and tried to backup the whole database. The same error appeared. The log says:
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN>
connected to target database: ORCL10G (DBID=770753237)
using target database controlfile instead of recovery catalog
RMAN>
Starting backup at 11-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=245 devtype=DISK
channel ORA_DISK_1: starting datafile copy
input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
channel ORA_DISK_1: starting datafile copy
input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
channel ORA_DISK_1: starting datafile copy
input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting datafile copy
input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
channel ORA_DISK_1: starting datafile copy
input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
Finished backup at 11-OCT-06
Starting Control File and SPFILE Autobackup at 11-OCT-06
piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
Finished Control File and SPFILE Autobackup at 11-OCT-06
RMAN>
Starting backup at 11-OCT-06
current log archived
using channel ORA_DISK_1
archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 1062
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 10/11/2006 16:40:05
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
RMAN>
Recovery Manager complete.
Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
Any help is appreciated!
Qian
Message was edited by:
QianChen
Maybe you are looking for
-
Hulu plus, and netflix not working on Apple TV Please help
Hulu plus, netflix and itunes store wont open on my apple tv. I cheked the internet connection and apple tv says it is conceted to my wi-fi. The internet and hulu and netflix will all work on my other devices in my home but just keep getting can no
-
How to Display all xml files at time in the browser
Hi, In my solution , it have one folder contain all xml files onliy like Billersettings.111.2.xml , Billersettings.113.2.xml...etc. Each xml file have only one record like biillerid,name,amount,date..etc. Now , when i run the page ,it should be show
-
"About this page" link not shown in notification page
Hi, I have a notification page. But I am unable to see 'about this page' link on this page. I have already set the profile options i.e.FND Diagnostics, Personalize Self Service Definitions on oaf page on site level and I can see the relevant links in
-
Respected sir I m facing a problem on my laptop from sume days before here whenever I want to use google chrome by wifi network of my mobile. Its say SSL connection error ERR_SSL_PROTOCOL_ERROER Before its working well I didnt updated window or insta
-
Proper Way to change sequences video mode
I have a sequence that I originally setup as DV-NTSC Anamorphic and I want to change it to 24p. I know that I can click on Final Cut menu and select Quick setup to select something but does this actually change the sequence I was working on? If not,