In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed
In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.
Hi,
The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
and convert your files to DNG.
regards,
steve
Similar Messages
-
hi, i want to buy iphone 5s silver and iphone 5s gold both with T-mobile nano card. Is Iphone 5s unlocked? if i will bel for example in Ukraine and will use the ukrainian nano card will it work there?
Apple does not unlock iPhones. however, T-Mobile, where you live does offer official unlocking. So, contact them as to the cost/requirements.
-
I have just bought a new Mac Pro after my old one died after nearly 10 years. I have most of my music backed up on CDs, but when i load them into iTunes they are only identified as Track 1, 2, etc. Can I transfer from my iPod and how?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long. -
i got a used macbook and the other persons apple id is still connected to the macbook. for example i cant update apps unless i have his passwod but i dont wanna pay for apps such as iphoto and more. is there anything i can do? this is a macbook 13 inch late 2008 model
You're going to have to purchase those apps for yourself. The seller shouldn't have left anything he had purchased on the computer when he sold it to you.
-
I have a sole i-pod and two pc's, used the instructions for "iTunes for Windows: Moving your iTunes Media folder" in the hope that I could synch my one i-pod between two different computers that are sharing the same library. Is it possible to have two seperate computers that only share an external hard drive (one wireless, one not) ? When I am looking at a shared library should it appear the same on both machines (ie: playlists/ purchased list etc)?
If it is moved correctly, playlists will display on both computers and it should be possible.
Close iTunes.
Hold <SHIFT> and launch iTunes.
When prompted to create a new or open an existing iTunes library point iTunes to the iTunesLibrary.itl file on the external drive.
The entire library should now show up with all playlists and playcounts.
Do this on both computers.
Keep in mind that only one computer can access iTunes at a time, otherwise errors will occur when each computer attempts to write to or update the iTunesLibrary.itl file.
Syncing may work seemlessly with both computers, but honestly syncing is designed to work with one and only one computer. -
I gave my husband an i-pad one Christmas...a year later, he gave me one for my birthday. Neither of us is a techie, and we never realized we could share through a home account the music we like, so we just purchased separatly, often for the same music. Now, finally, we know we could have shared but how do we do this with two separate accounts already set up?
also, I have a desktop windows 7-64 bit and he has a year old Mac laptop. Will this cause problems in setting up a home sharing system? WE both have i-pod nano's.I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
1.) Network Extender (may cause issues for others in a condo or apartment style setting)
2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi. -
How could we go to ios4, when ios5 uses so much memory space?
Start by setting it up as new device, without using the latest backup to restore your settings: How to back up your data and set up as a new device
If your "other" section is bigger than 1GB, there have been problems during the sync process and some data got damaged. Only a restore can reduce the size back to normal again. -
I need help on how to transfer my old iPad to my husband
Once you're completely satisfied that your new iPad is set up properly with all of your apps and data, simply "restore" the old iPad to its factory-new state from within iTunes. There's a button to do just that on the main screen whenever your iPad is connected.
You can also perform a factory restore from the device itself, but it takes longer and is only for use in cases when iTunes isn't available.
Once the old device has been restored to its pristine state, you may set it up however you wish, with a new iTunes account, your shared iTunes account, etc.
Good luck! -
My friend had her laptop at my house and wanted to connect to my wireless network... I couldn't remember my password and didn't know how to retrieve the info from my ipad.. How can I find ut what the PW is to my wireless network? Thanks
Your password is something you created and is configured in your router. Your router may have the facility to reveal a password but you will have to find that out for your router.
Alternatively, you can reset your router back to factory default which will remove your security settings so you can reconfigure them. This is usually a small button you press on the back of the router. Maybe recessed in a small hole so you need to use a toothpick to depress it. -
Windows 8, set default application for example adobe reader, customize the start screen
I have two questions, Im going to deploy Windows 8 to our company, but have 2 big issues.
1) I need to customize the start screen, but cant find anywhere in the gpo´s? How can I do this without sysprepping etc (deploying with SCCM2012 SP1)
2) I need to set the default programs for adobe reader, mspaint etc, how can I do this? It doesnt work with the GPP and folder options, anyone have done this?
Thanks in advanceHi,
Thanks for posting your question in the forum. First of all, if you want to deploy customized Windows 8 Start Screen for domain users, I suggest we could refer to the following similar threads
and article.
Group Policy for Windows 8 Start
http://social.technet.microsoft.com/Forums/en-us/winserver8gen/thread/13a13c25-a1b2-4665-ab67-a2f9bc3b9bba
GPO Management for Windows 8 Start Screen?
http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/2d4bdcc6-3733-470e-939f-8b6eb0ef4492/
Windows 8 Start Screen Customization with MDT
http://blogs.technet.com/b/deploymentguys/archive/2012/10/26/start-screen-customization-with-mdt.aspx
Regarding the second question, since you want to set the default programs via Group Policy but it didn’t work. Would you please let me know how did you configure the setting? Please refer to
the following steps to configure the GPO setting.
To create a new Open With preference item
Open the
Group Policy Management Console. Right-click the Group Policy object (GPO) that should contain the new preference item, and then click
Edit.
In the console tree under
User Configuration, expand the Preferences folder, and then expand the
Control Panel Settings folder.
Right-click the
Folder Options node, point to New, and select
Open With.
In the
New Open With Properties dialog box, select an Action for Group Policy to perform.
Enter Open With settings for Group Policy to configure or remove.
Click the
Common tab, configure any options, and then type your comments in the
Description box.
Click
OK. The new preference item appears in the details pane.
For details, please refer to the following article.
Configure an Open With Item
http://technet.microsoft.com/en-us/library/cc732272.aspx
In addition, I suggest we could collect the following information to narrow down the cause of the issue.
GPMC.log
==================
a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select
the proper user in the wizard)
c. Right click
the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.
Andy Qi
TechNet Community Support -
I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?
no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing. -
After updating my mac to the new operating system I have had several problems. Now my printer program is not working.
Do you have any suggestions?Start by telling us what printer you hope to use.
Look at the printer manufacturers site to see if they have a 10.9 print driver.
Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
http://support.apple.com/kb/HT1341
If the model is supported you should be able to add it & the driver will be downloaded. -
The following code works great (Functions Main and OpenThisFile ) to select files from a folder and read into defined variable "FileToProcess As Collection" (I guess then renamed fil) and use that list of files to run through
an import process defined in a function "StartMe".
What I want to do is read the results of a query into a similar collection variable and then use in a function like "StartMe" to run a series of reports. The functions to do that below (PrintCKListTables and ReadQueryOfSDGs) currently
don't work erring out "For Each s In .selectedQuery". I would appreciate any help guiding me how to fix function
ReadQueryOfSDGs() As Collection
Thank you very much in advance for your help!
Public Function Main()
Dim FilesToProcess As Collection, fil
Dim initialFilePath As String
initialFilePath = CreateObject("WScript.Shell").specialfolders("C:\temp")
Set FilesToProcess = OpenThisFile(initialFilePath)
For Each fil In FilesToProcess
StartMe fil
Next fil
End Function
Public Function OpenThisFile(initialFilePath As String) As Collection
'Requires reference to Microsoft Office 12.0 Object Library.
Dim fDialog As Office.FileDialog
Dim varFile As Variant
'Clear listbox contents.
'Me.FileList.RowSource = ""
'Set up the File Dialog.
Set fDialog = Application.FileDialog(msoFileDialogFilePicker)
With fDialog
'Allow user to make multiple selections in dialog box.
.AllowMultiSelect = True
.InitialFileName = initialFilePath
'Set the title of the dialog box.
.Title = "Please select one or more files"
'Clear out the current filters, and add our own.
.Filters.Clear
.Filters.Add "XML Files", "*.XML"
'Show the dialog box. If the .Show method returns True, the
'user picked at least one file. If the .Show method returns
'False, the user clicked Cancel.
If .Show = True Then
'Loop through each file selected and add it to the list box.
Dim s
Set OpenThisFile = New Collection
For Each s In .SelectedItems
OpenThisFile.Add s
Next s
Else
MsgBox "You clicked Cancel in the file dialog box."
NotContinue = True
End If
End With
End Function
Public Function PrintCkListTables()
Dim FilesToProcess As Collection, fil
Dim ListSDGs As String
Set FilesToProcess = ReadQueryOfSDGs(ListSDGs)
For Each fil In FilesToProcess
fNameExportpdfReport (fil)
Next fil
End FunctionPublic Function ReadQueryOfSDGs() As Collection DoCmd.OpenQuery "y_qs_DataIn_All_SDGList"
Dim s
Set ReadQueryOfSDGs = New Collection
For Each s In .selectedQuery
ReadQueryOfSDGs.Add s
Next s
End FunctionThere are a few problems here. In function PrintCkListTables() you define a string variable ListSDGs and then use that as an argument to the function ReadQueryOfSDGs(), but ReadQueryOfSDGs() as written does not accept any arguments. It's also not clear
what ListSDGs represents...a list of files, names of queries? Also, the line
For Each s In .selectedQuery in
ReadQueryOfSDGs()
references something called .selectedQuery which is undefined.
Is it that you want ReadQueryOfSDGs() to loop through the records returned by a query and add a field from each record to a collection? If so, something like the following might better serve you:
Public Function ReadQueryOfSDGs() As Collection
Dim C As New Collection
Dim rst As DAO.Recordset
Set rst = DBEngine(0)(0).OpenRecordset("y_qs_DataIn_All_SDGList", dbOpenForwardOnly, dbReadOnly)
Do Until rst.EOF
C.Add rst!MyField ' where MyField is the field in y_qs_DataIn_All_SDGList you want to add to your collection
rst.MoveNext
Loop
rst.Close
Set rst = Nothing
Set ReadQueryOfSDGs = C
End Function -
After the last OS X update (a security update I think), two things happened:
my iMac would not boot (gray screen) or if it did boot, the mouse wasn't recognized and I couldn't mouse to the PW field to log in - nor did tabbing or any keystrokes get me there. I fixed this by unpludding peripherals (back up drive), but know I can't boot unless they are unplugged and it makes using TimeMachine a pain in the arse.
My wired, extended mac keyboard now types without me, primarily, as far as I can tell, the arrow key(s). .................................... So, for example, those periods you see here are because I touched the right arrow key and off it went until I pressed ESC. Also, sometimes they just start going off on their own. For example, I can be in sleep mode and all of a sudden the screen will wake and the PW field will start filling with periods, just like you see above. ***?
Seriously, you would think that apple would have a response for this. I have searched their support site and NOTHING. I've seen some older threads on reseting certain things. Does anyone have any summer 2013 updates?
Thank You!!!kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus
Maybe you are looking for
-
Power Mac G5 Dual 2.7GHz Processor L.E.D indicator
I got a power mac g5 dual 2.7GHz here and it is acting weird. I found out it is the liquid cooling system that causes the problem. I took out the whole lcs unit and fix it. But when I put everything back, turn it on, there is no display and chime sou
-
Hey guys I am writing my first EE application and running into a few problems and would appreciate any help i can get overview At the moment the application consists of an enterprise module and a windows client application. Web module will be done la
-
ICal service grayed out for users in Server Preferences
In Server Preferences all the services are enabled and the buttons are green only on the home page of Server Preferences but, when I click on users, then Services, all the services are available to check and uncheck but the iCal service. iCal service
-
Non-Domain Server Cert Requirements Enterprise vs. Standard
Is there a way to monitor a non-domain machine without having an enterprise cert server? I am using a standard CA currently and was wondering if I absolutely had to upgrade it to a Enterprise CA? We currently only need to monitor 4 off domain serve
-
Yep, it look like even Apple software can have little bugs. To trigger it, open the dashboard then click and try to access menus of any system icons in the upper right part of the screen (except spotlight) with the click and hold method. You might ha