In Material master safety stock field is in display

Hi,
As a consultant i am able to change the Safety stock field in MRP view in the test system and Production also,but for the user this particular field is in display mode wheras other field in the MRP view user is able to change.
Kindly help me if,there is any settings for the same.
Regards,
Prashant

Hi Prashant,
Have you checked if there is any configuration made to lock same fields on material master? Follow the below path please;
Logistics u2013 General ==> Material Master ==> Field Selection ==> Define Lock-Relevant Fields
May be someone defined some fields as u201Clock-relevantu201D in customizing and during creation or changing of material master he/she set this indicator. You are able to change those fields because you may have SAP_ALL authorization whereas others may not.
Best regards

Similar Messages

  • Controlling material master access through field groups

    Hello SAP Gurus,
    We want to control the material master access (MM01/02) using field groups. I am unable to find any authorization object provided by SAP which can control access at field group level.
    My scenarios is that certain group of people should be able to only display the fields in MM02 tcode and certain group of people should be able to change it. Please suggest if there is any config which will enable me to do this.
    Thanks and Regards
    Amit Gupta

    Dear usen the following authorization object to contol the field entry on view level,
    I donot think at field group level it is there
    M_MATE_STA
    status are nothiong but views
    A     Work scheduling
    B     Accounting
    C     Classification
    D     MRP
    E     Purchasing
    F     Production resources/tools
    G     Costing
    K     Basic data
    L     Storage
    P     Forecasting
    Q     Quality management
    S     Warehouse management
    V     Sales
    X     Plant stocks
    Z     Storage location stocks

  • How to change Valuation class in material master(have stock)

    HI,
    I would like to change the valuation class in material master, How to change VC? is there any process before changing VC?
    I heared when Material have nil stock then only it's possible to change VC, Is it correct? which TC can I use for change VC?
    Regards,
    venki

    Dear venki,
    To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines .  flag for deletion all open PO lines,
    Regards
    shankar

  • Mass maintainenance of material master for the field MARC-NCOST,SOBSK

    Hi
    While maintaining two fields NCOST and SOBSK for hude materials using MM17 transaction, the transaction executed properly while saving the transaction. There is no warning and error messages for all materials. But it was not updated in material master or in tables. for other field relavent to MRP updated correctly.
    when I am maintaining manually for each material it is taking the value update the same.
    Please explain the problem why it was not updating and let me know the solution.
    Regards
    Kishore

    Hi,
    Thanks for ur response.
    I am getting green light. Please note the application message given below.
    "The material cannot be maintained since no maintainable data transferred
    Message no. MG160
    Diagnosis
    You wanted to maintain an existing material master record as follows:
    By changing it
    However, you have not yet maintained the material master record for the organizational levels and data fields specified, or user departments selected. You can therefore process this data only in Create mode.
    By extending it
    However, you have already fully created the material master record for the organizational levels and data fields specified, or user departments selected. You can therefore process this data only in Change mode.
    In both cases, this message can appear if there is no maintainable user department left. This occurs if you have not set the Check required fields indicator when transferring data (program RMDATIND). Although the absence of an entry in required fields does not then necessarily result in an error, the number of maintainable user departments is reduced accordingly.
    Procedure
    Depending on the cause, maintain the material master record in Create or Change mode, or also transfer the missing required fields."
    where can I find IDoc list for this transaction.
    Regards
    Kishore

  • In material master not all fields show the description of their value

    Gurus -
    Certain fields in the material master show their description text along.
    Example -
    Base Unit of Measure  - EA      each
    The description Text 'Each' which represent 'EA' comes from text Table T006A-MSEHT
    Not all fields in material master show the description of what they represent. (only appear on F4 popup)
    I want this description to come up for MARA-MAGRV field.
    I want the configured value description for this field to appear on the screen.
    I have 3 values put in this MARA-MAGRV
    Z001 - description text 1
    Z002 - description text 2
    Z003 - description text 3
    in MM01/MM02/MM03 only Z001 is see, not it description.
    Here is what i tried
    Added TVEGRT-BEZEI (desc field) in Transaction OMSR and assigned selection group 103 which holds MARA-MAGRV field too
    any config missing?? what say?
    Advises appreciated!
    Thanks

    You have to find out the conversion routine for domain MAGRV and enter in the convers. routine field.
    if did not find one than you have create custom (take ABAPer help)
    go to SE11 adn enter the domain MAGRV and hit display
    on the definition tab you will see the conversion routine
    here you need to populate the appo. conversion routine to see the text on the materia screen.
    Conversion takes place when converting the contents of a screen field   
    from display format to SAP-internal format and vice versa and when      
    outputting with the ABAP statement WRITE, depending on the data type of 
    the field.                                                                               
    If standard conversion is not suitable, it can be overridden by         
    specifying a conversion routine in the underlying domain.                                                                               
    A conversion routine is identified by its five-place name and is stored 
    as a group of two function modules. The function modules have a fixed   
    naming convention. The following function modules are assigned to       
    conversion routine xxxxx:                                               
    o  CONVERSION_EXIT_xxxxx_INPUT                                          
    o  CONVERSION_EXIT_xxxxx_OUTPUT                                                                               
    The INPUT module performs the conversion from display format to internal
    format. The OUTPUT module performs the conversion from internal format to
    display format.                                                                               
    If a screen field refers to a domain with a conversion routine, this    
    conversion routine is executed automatically each time an entry is made 
    in this screen field or when values are displayed with this screen field.

  • Safety Stock field/table in ASCP Horizontal Plan?

    Hello,
    I need to get the safety stock data that is seen from the ASCP's Horizontal Plan. Whiat table and field is it? Can't find it from MSC_DEMANDS and MSC_SUPPLIES. Thanks

    Hello,
    in an ASCP plan safety stock results/output is always populated in MSC_SAFTEY_STOCKS and not in MSC_DEMANDS.
    MSC_DEMANDS is populated for SS only in IO Plans
    safety stock demands can be seen in msc_demands with origination_type = 31
    HTH
    Geert

  • In material master standerd price field not updating in group currency

    In material master accounting 1 tab, under price and values  table. standerd price is not updating in group currency.
    Can you sugest me how to resolve this issue

    Hi,
    As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
    Thanks
    Goutam

  • Material Master Price Unit field MBEW-PEINH

    Hello,
    In my experience I've always dealt with the Price Unit being equal to 1000 (1.00 for 1 ; 1000.00 for 1000). It is my understanding that this was decided upon due to the decimal point limitation. In my new project, everything is set to 1. Is this an issue at all? If a few parts are less than .01, could just those be set to per 100 or 1000?

    Hi,
    the price unit can be set on plant level of material master.
    nd it is highly suggested to set the price unit to a level where the valuation price is something like 494,99 / 1000 units instead of 4,95 / 10 units or 0,50 / 1 unit (I've already rounded the values as SAP would do).
    best regards, Christian

  • Material Master Table (Blank Fields)

    Gurus,
    I need help in finding out which fields in Mara are not commonly used. I need 3 to 5 fields with Character data types.
    Will be utilizing this uncommonly used fields for other fieldnames (e.g. ISH_AGENT1, ISH_AGENT2, etc) that are not implemented.
    Thanks in advance

    My guess...depends from organization to organization
    hw they use the table....
    regards,
    chaithanya k

  • CIF Exit for updating APO field SAFETY STOCK METHOD from R/3.

    Hi All,
    I have a requirement for updating filed "Safety stock Method " in APO from R/3.
    We can do it through transactions CFM1 and then CFM2 in R/3.
    This happens when we make changes in MM02 in R/3,
    for fields,
    In ECC, Goto MRP2 view in material master
    Safety stock (EISBE)
    Safety time/act cov. (SHZET)
    STime period profile (SHPRO)
    Currently, we are using a exit : Exit_saplcmat_001,
    but it only gets triggered when we make changes in safety stock and safety time.
    where as if we make changes only in STime period profile, and don't make any change in safety stock and safety time,
    in this case the exit is not triggered.
    Now, we are looking for an exit, which will get triggered even when there is no change in safety stock and safety time,
    where as there is change in STime period profile.
    Please suggest what can be used.
    Thanks & Regards,
    Rahul A

    Hi,
    You may need to include the field in some structure also.
    eg.  for sales order interface we add z fields to  structure /SAPAPO/KOMGO
    Thanks,
    Pavan Verma

  • Max stock level as safety stock from material master while running SNP Heuristic

    Hi Experts,
    Our user wants to consider max stock level as safety stock from material master while running SNP Heuristic, not the actual safety stock.
    Is there any possibility for this setup?
    --Kishore

    Hi Kishore,
    With the given details I suggest that the user can maintain the max stock level values directly in safety stock field of the material master for all materials to be planned by SNP heuristic (keeping the max stock level field blank). Then this safety stock field (which has actually the max stock level values) will update the safety stock values in APO product master and in turn can be considered for SNP heuristic.
    Note: The max stock level field in APO product master is used by SNP heuristic only when the target stock level method is maintained as 4, 5 or 6. Since your requirement is to use max stock level as safety stock, so it does not look like that you will be using these target stock level methods or the max stock level field in R/3 and APO. So, this can be left as blank in both R/3 and APO.
    Please let me know if this helps.
    Regards,
    Umesh

  • Adding field in material master

    Hi All,
    I am trying to add field manufacture part number in material master. In field selection Manufacture part number (mara-mfrpn) field is optional. I checked the field selection group at material type level, transaction code field selection group (MM01.MM02,MM03) and Industry sector specific field selection, every where the fieild is optional but it is not coming up in material master. Please let me know if i m missing some config.
    Regards
    Chetan

    Hi Chetan,
    Use material type HERS.
    Also find the following link useful.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/106f94ee-8dc2-2a10-a485-882871fa5c11?QuickLink=index&overridelayout=true
    Also from link http://help.sap.com/saphelp_470/helpdata/en/75/ee15c655c811d189900000e8322d00/content.htm
    some part is copied
    Create material master records
    If you work with MPNs, the number of manufacturers of a manufactured part corresponding to one of your firmu2019s own materials determines the number of material master records you have to create:
    If there is just one MPN corresponding to one of your firmu2019s own materials, you can enter it and the manufacturer directly in the master record for your own material. In this case, you need not create an MPN Material.
    If there are several MPN materials corresponding to one of your firmu2019s own materials, you must create MPN material master records with the material type HERS. In the Purchasing view, enter the manufacturer part number, the manufacturer (this can be either a vendor master record or a manufacturer master record), and your firmu2019s own, inventory-managed material.
    The MPN material master records are assigned to your firmu2019s own material. Stocks are managed with respect to the firmu2019s own material.
    0.8 cm steel bolts with a diameter of 0.5 cm are identified and stocked in your enterprise as the firmu2019s own, inventory-managed material RAW_S_08.
    The manufacturer Meyer & Co. sells these bolts under the number 8001 (the manufacturer part number). This information is stored in the MPN material master record S_MEYER.
    The manufacturer Smith Corp. supplies similar bolts under the number 4711. This information is stored in the MPN material master record S_SMITH.
    The MPN material master records S_MEYER and S_ SMITH are assigned to the material master record RAW_S_08.
    Hope it helps
    sBk

  • In material master How to add a new field on Basic data 1 view

    Please Help It's very Urgent...
           I have the Requirement that in Material Master a new field reqired to be added on basic data 1 view. This new field should be added just below field Old Material Number( MARA-BISMT).
    Can anyone Please suggest the correct way to add the field as per above requirement.
    I hope to get quick reply.
    Thanks and Regards...
    Tanweer Zaki

    No need to validate all the other fields is no wear concerened with you, if you have any requirement to validate your field MVKE-LFMAX .
    PROCESS BEFORE OUTPUT.
                         Verarbeitung vor der Ausgabe
      MODULE INIT_SUB.
      MODULE GET_DATEN_SUB.
      MODULE FELDAUSWAHL.
      MODULE SONDERFAUS.
      MODULE SONFAUSW_IN_FGRUPPEN.
      MODULE FAUSW_BEZEICHNUNGEN.
      MODULE FELDHISTORIE.
      MODULE BILDSTATUS.
      MODULE ZUSREF_VORSCHLAGEN_B.
      MODULE REFDATEN_VORSCHLAGEN.
      MODULE ZUSREF_VORSCHLAGEN_A.
      MODULE SET_DATEN_SUB.
    PROCESS AFTER INPUT.
                         Verarbeitung nach der Eingabe
      MODULE GET_DATEN_SUB.
      CHAIN.
         FIELD MVKE-LFMNG.
         FIELD MVKE-AUMNG.
               MODULE MVKE-LFMNG ON CHAIN-REQUEST.
      ENDCHAIN.
      FIELD MVKE-EFMNG.
      FIELD MVKE-SCMNG.
      FIELD MVKE-RDPRF.
      CHAIN.
         FIELD MVKE-SCHME.
               MODULE MVKE-SCHME.
      ENDCHAIN.
      CHAIN.
         FIELD MVKE-RDPRF.
               MODULE MVKE-RDPRF.
      ENDCHAIN.
    <b>CHAIN." to validate your field
         FIELD MVKE-LFMAX.
               MODULE MVKE-LFMAX.
      ENDCHAIN.</b>
      MODULE SET_DATEN_SUB.
    PROCESS ON VALUE-REQUEST.
    Selbstprogrammierte Eingabehilfen
      FIELD MVKE-SCHME  MODULE MEALL_HELP.
      FIELD MVKE-RDPRF MODULE MVKE-RDPRF_HELP.
    <b>&----
    *&      Module  MVKE-LFMAX INPUT
          text
    MODULE MVKE-RDPRF INPUT.
    Validate check code
    ENDMODULE.                 " MVKE-LFMAX  INPUT</b>
    Thanks and Regards,
    Pavankumar

  • Previous year stock is appearing in Material Master accounting view

    Hi,
    We have ran cycle count inventory to set the stock Zero for a particulat Material. In Stock overview the report is showing as Zero stock for the material. But in Material Master the stock is showing as one and it is reffering to previous period. Need to set the stock as Zero, kindly us me know your thoughts on this issue.
    Thanks and Regards
    Gangadhara

    Deepthi Suvarna wrote:
    Hi ,
    >
    > Use function module DB_DELETE_TABLE and input table MARHD and delete the entry for the previous period stock.
    >
    > Thanks
    > Deepthi
    mardh table is a audit relevant table, it is absolute nonsense to delete enties from standard tables.
    The use of this function module is not even a solution for the issue discussed in this thread.

  • Trigger automatic e-mail for Material Master field change

    Hi All,
            Please guide me, Is that possible can we able to trigger automatic e-mail to the when ever SAFETY STOCK field get changed.
    If the above is possible, Please advice me a step by step procedure will be thankful.
    Thanks in Advance.

    dear friend
    you probably might look at SAP Business Workflow features

Maybe you are looking for