In MD05 system show message "The MRP element no longer exist".

Hi Guru,
Need some help .
In MD04 transaction contain Purchase order, when I double click purchase order,It will get open .  But when I open same purchase order in MD05 system show message u201CThe MRP element no longer exist".
Please help me , if any know the solution or any input. Open purchase order in system.
Regards
PNU

PNU,
I don't believe this is the same Purchase order.
Review closely order number/item number/schedule number.  I believe you will see that the old entry (MD05) no longer exists, and has been replaced with a similar item.
Best Regards,
DB49

Similar Messages

  • Inactive items show in the MRP Report

    Inventory items marked as inactive show in the MRP report - 8.8, SP0, PL12. If there are requirements, they show regardless of whether or not Display Items without Requirements is checked. If there are no requirements and the Display Items without Requirements is checked, inactive items show too. Is this intentional?  My customer wants to know this and doesn't understand why their inactive items are showing in the MRP Report.
    Thanks
    Sally Weinrauch

    Hello Sally,
    Did you check the following path:
    Administration>System Initialization>General Settings-->Inventory Tab
    Under this tab at the very last you have a checkbox " Display Inactive Items in Reports". Please uncheck this option and try running MRP again. Let us know if you still have questions.
    Regards,
    Praneeth

  • MY IPAD IS DISABLED I TRIED TO RESTORE IT BUT ITS SHOWING MESSAGE "The iPad could not be restored. the device isn't eligible for the request build"

    MY IPAD IS DISABLED I TRIED TO RESTORE IT BUT ITS SHOWING MESSAGE "The iPad could not be restored. the device isn't eligible for the request build"

    Follow the steps here:
    Error 3194, Error 17, or "This device isn't eligible for the requested build" - Apple Support

  • I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

    I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

    Greetings cdewinkel,
    It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Make sure that your device is on
    Also make sure that you can get to the Home screen.
    Get help if you have one of these issues:
    Your iOS device won't respond or turn on.
    Your iPod won't turn on.
    You forgot your passcode or your device is disabled.
    Make sure that your Mac supports your device
    See the system requirements for iPhone, iPad, or iPod.Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable. 
    Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
    You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust. 
    Learn more about the Trust This Computer alert.Restart your device
    Restart your iOS device or reset your iPod.Restart your Mac
    Turn your Mac off and back on.Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software. 
    Get more help
    If you still don't see your device in iTunes, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • How can I download a 18 minute video I recorded from my iPad to either email or youtube or vimeo I keep getting the message the file is too long.

    How can I transfer a 18 minute video I recorded on my iPad camera app to email/youtube or vimeo? I keep getting the message the file is too long do want to send clips?
    Thanks

    Youtube usually had an 8 minute length cap, which may be part of your issue. Also at 18 minutes that is probably a gig+ file size, which will also take a long time to upload and may be another part of the issue.
    Edit it down as jim suggested. Or you may need to use something like dropbox, to get it off your ipad and onto a computer where might have more options to edit it down or size it down.
    If it's just file size you can transcode it into a smaller file - a lower quality MP4 for example. If it's the length that's an issue for youtube, you'll need to break it up into a couple different files and upload part 1 and part 2

  • HT204053 I created a new apple id because the previous one no longer exists as email (domain had to be cancelled). I keep seeing the old one pop up in my iPhone for which I don't remember the password. How can I get rid of it???

    I created a new apple id because the previous one no longer exists as an email (domain had to be cancelled). I keep seeing the old one pop up in my iPhone for which I don't remember the password. How can I get rid of it??? Or how can I reset the password if the email doesn't exist??? I also tried answering a question (my date of birth) but it says it's wrong.
    I'm really frustrated with the apple id!!!
    Frustrated!!!

    In one of the help pages for managing your Apple ID (http://support.apple.com/kb/HE40), it shows two separate sections, one for Apple ID and one for Primary Email address. When I go to manage my Apple ID, I see only a single section for both. Can the two be 'separated', especially when you face the situation of having to discontinue your email address for some reason?
    I also noticed that when navigating to Apple ID Support Communities, it shows my nickname 'dishdy'. How and when did I insert this? In the current sequence for creating an Apple ID I don't see this. In my current profile I don't see this.
    In any case, I have freed myself from my previous Apple ID (@artemis.it) on my iPhone.
    Thanks for your help.

  • HT1349 I have an old apple ID # that I used to purshase hundreds of dollars of I-Tunes.  Unfortunately I cannot reset the PW because the email account no longer exists so when it says it is sending information to reset PW to email account it is going nowh

    I have an old apple ID # that I used to purshase hundreds of dollars of I-Tunes.  Unfortunately I cannot reset the PW because the email account no longer exists so when it says it is sending information to reset PW to email account it is going nowhere.  How am I able to reset the PW.  Also, when it asks for my birthdate in order to reset it that way I use the birthdates of everyone in my family and not one works.  Please help.

    Try contacting iTunes store support: http://www.apple.com/emea/support/itunes/contact.html.

  • How do I find my password if I can't remember the answers to the security questions and the email it is sending the password to no longer exists?

    How do I find my password if I can't remember the answers to the security questions and the email address it is sending the password to no longer exists?

    If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address set up then go to Express Lane  and select 'iTunes' from the list of 'products' in the middle of the screen.
    Then select 'iTunes Store', and on the next screen select 'Account Management'
    Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
    You should get an email reply within, I think, about 24 to 48 hours (and check your Spam folder as well as your Inbox)

  • I no longer have a computer that my itunes was on and I want to put on new laptop will it recognize the old one no longer exists

    I no longer have a computer that my itunes was on and I want to put my music on new laptop.  will it recognize the old one no longer exists?
    How do I share with a new computer.
    How many devices can I share on again?

    http://discussions.apple.com/docs/DOC-3141

  • HT3702 I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DH How do I delete the restriction in iTunes

    I have an order that has not been completed and the old card no longer exists and I want to pay with my new card. the order is MHBG5FL5DHHow do I delete the restriction in iTunes

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (122986)

  • MD04 can show all the mrp area elements of a material ?

    Dear guru.
    MD04 show in the same view the elements of only one selected mrp area for a material.
    Do you know an exit or other in order to show in the same view the elements of all the mrp areas ?
    Thanks.

    That's the only BADI I can think of that can help you.  If it doesn't suit your need, then you need a new ABAP reporting.

  • How to Show/hide the UI Elements in a WD Application

    Hi,
    I need to show/hide and control other properties such as required, readonly etc from UI.
    Can somebody please tell me how I can do that as I am able to save and retrieve the fields from another UI, now the need is to apply them once the Application starts.
    Thanks,
    Rachit

    Hi,
    To show/hide UI elements follow below procedure.
    1) define a attribute(VISIBLE in this case) element in the context of type WDUI_VISIBILITY
    2) in the UI element properties(Visible) bind the above attribute with the element you want to make visible/Hide.
    3) call below method to hide the UI element
        wd_context->set_attribute(
         EXPORTING
           name = 'VISIBLE'
           value = cl_wd_uielement=>e_visible-none ).
    4)     wd_context->set_attribute(
         EXPORTING
           name = 'VISIBLE'
           value = cl_wd_uielement=>e_visible-visible ).  for display.
    You have to call these method at the right spot.
    Thanks,
    Sree.
    Edited by: t sree on Oct 16, 2008 3:36 AM

  • About the MRP element.

    hi,
    My problem is as follows.
    I have to find out what is next MRP element for the material/production version pair.
    In  my case  to consider the production finish date for planned order  date & scheduled end date for production  order as next MRP element for the material.
    If i got more than one production version for the same material,
    what criteria should i apply for calculating next MRP element.

    Hi,
    Planned order:-A request created in the planning run for a plant to trigger the procurement of a plant material for a certain quantity for a specific date.
    Customer order:- is nothing but sales order, A customer request to the company for delivery of goods or services at a certain time.
    The request is received by a sales area that is then responsible for fulfilling the contract.
    MRP elements are
    OrdRes Order reservation (production order)
    PurRqs Purchase requisition
    SubReq Subcontracting requirement
    SchLne Schedule line
    BtchSt Batch stock
    PrdOrd Production order
    Order Customer stock for make-to-order
    CusReq Customer reqmt (Reqmt element from demand management)
    ShipNt Shipping notification (committed order quantity)
    StLcSt Storage location stock (Storage location MRP)
    BStLoc Batch storage location
    SchAgr Scheduling agreement
    Reser. Reservation created manually
    NtwOrd Network order
    PlOrd. Planned order
    PrjStk Project stock
    IndReq Planned independent requirements
    ForReq Forecast requirements (forecast-based planning)
    QM lot QM inspection lot
    ComCnf Production order confirmation
    SimReq Simulative requirements
    SomOrd Simulative order
    DepReq Dependent requirements
    RelOrd Release order (Multi-plant planning: stock transfer)
    TrRes. Release order requisition (Werksübergr. Planung: Umlagerung)
    UnplRq Unplanned requirements (additional reqmts from forecast)
    StTRes Stock transfer reservation
    Transf Transfer reservation
    Inqury RFQ
    Quote Quotation
    Order Sales order
    SchAgr Scheduling agreement
    Contr. Contract
    Fr.del FOC delivery
    Deliv. Delivery
    CusReq Customer requirement
    GIssue Goods issue
    Stock Plant stock
    GRecpt Goods receipt
    Replsh Replenishment horizon

  • "Cannot update iPod because the selected playlists no longer exist"

    That is an error message I'm now getting. My iPod is erased but iTunes works fine. How do I fix this? (I've already restored all settings, updated, software, etc.)
    HP   Windows XP  

    " When I try to put it back it says "Songs on the iPod cannot update because all of the playlists selected for
    syncing no longer exist"."
    http://discussions.apple.com/thread.jspa?messageID=607312&#607312

  • I bought a bbc top gear mag subscription, but it says I need to download a update. The app symbol no longer exists on my ipad and this bbc app is no longer available in Australia to reload. In settings newsstand the subscription still exists

    Hi All, I have purchased a BBC top gear magazine subscription thru the App Store about 6 months ago. This bbc app is no longer available to download in Australia because of the Australian version of the mag now being available. Firstly the app symbol has completely disappeared from my ipad. I can still locate my original purchase in settings>newsstand and subscriptions updates are enabled. My second problem is I cannot download any new magazine editions because a message says I need to update the app. Since their is no app to update on my ipad and the app no longer exists/ is available in App Store Australia I'm kind of stuck. The app is available in the USA App Store but I cannot join because I'm not a resident of the us. Any help would be appreciated thanks Fassihire

    I think your best bet here is to contact the app developer. Sounds like you need advanced troubleshooting that someone who is a part of the app would know best how to resolve. Best of luck.

Maybe you are looking for

  • Using External Drive with Itunes

    I have a very large Music and Video collection on a MY BOOK 1TB drive (810GB file size) I want to use it as my primary I tunes Music library. I have followed the instructions on Itunes support and created a new file on the drive and redirected I tune

  • How can I import my address book from spicebird to thunderbird?

    I changed from Spicebird to Thunderbird for my email account. How can I import the address book from Spicebird to Thunderbird?

  • Mass deletion of alternative UOM conversion

    Hi Colleagues, Does anybody knows is there an easy way for mass-deletion of alternative unit of measure conversion rules in material master? Thanks, Artashes

  • Access to Abap

    Hi Can somebody give step by step details to do setting/configuration to provide access to Abap part of the system to functional consultants for learning their related abap part. When they try to access,the system ask for access key. Thanks dm

  • Explorer.exe keeps restarting randomly

    My Explorer.exe will randomly restart. when it does i get the following event log under Application in the event veiwer: Faulting application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4 Faulting module name: avgloga.dll, versi