In MSS, can Managers view information of Future Dated Hires & do EIT entry?

In MSS, can Managers view information of Future Dated Hires & do EIT entry? We followed Metalink NOTE:459876.1 but still not working.
Thanks,
Peter

I have looked at the document you referred to. The personalisation described may not work on its own. You would need to make sure that the security profile allows these 'future' people to be seen. For example, is the supervisor marked on the assignment?
I am a bit sceptical that this method would work, but hope it dioes! Let me know if the suggestion is of any use.
Regards
Tim

Similar Messages

How can I view information about an image, such as the file name and exposure, on the Ipad?

how can I view information about an image, such as the file name and exposure, on the Ipad?

You can't with the built-in Photos app, but there are apps such as iPhoto which allow you to see the exposure details (aperture, shutter speed, focal length, ISO). PhotoMeta also shows you that info

Where can I view information on the project duration?

I am trying to estimate how long it will take users to take a course. Yes, much of it is self-paced, but is there somewhere in Captivate i can view how long the project is just based on slide length?

I didn't answer your question last night, because it also depends on the version you are using. If it is the latest one, CP 5.5 you also have a brand new panel Project Info that offers you that and some other information.
Lilybiri

Other owners can't view the added information in Sharepoint word and Excel documents

Hi,
I have a question where from a workplace, the owners can adjust or add information in Word and Excel docs wich are stored in a library.
The problem is as follows: when one of the owners change the contents or adds content to one of the files, the other owners can't view in the file what's been added.
The files are always being checked in when an owner has finished adding content.
Also every owner has the same permissions.
Has anyone already had this problem?
Kind regards
Wim

Hi Wim,
I think you have misunderstanding Michaelle's attention. there is no workflow related to Approve/Reject.
Go to Library Settings->Version settings->Choose "Require content approval for submitted items?"
Then after you publish a major version of the document, you also need to approve the document to make it approved.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can't view output for concurrent request

I apologize if this is a common error - I tried to research this in the forums but didn't find anything that I haven't already tried. I checked the OPP - it is running with 3 processes - no error in the log that I can see. I checked the profile for the OPP timeout and have increased it....
I have registered the data definition, registered and associated a template - created the concurrent program but when I try to run it completes with a warning and can't view output. The log states:
XDO Data Engine Version No: 5.6.3
Resp: 20420
Org ID : 81
Request ID: 2322744
All Parameters: PO=5026930
Data Template Code: GISDOSXML
Data Template Application Short Name: XXGISD
Debug Flag: N
{PO=5026930}
Calling XDO Data Engine...
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Unable to find an Output Post Processor service to post-process request 2322744.
Check that the Output Post Processor service is running.
------------- 2) PRINT   -------------
Not printing the output of this request because post-processing failed.
--------------------------------------

also - I found a note on using the XML Republish Report and I tried it with the report I ran and it erred completely. Here is the log for the republish:
Oracle XML Publisher 5.6.3
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:683)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Caused by: oracle.xdo.parser.v2.XMLParseException: '=' missing in attribute.
     at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
     at oracle.xdo.parser.v2.NonValidatingParser.parseAttrValue(NonValidatingParser.java:1556)
     at oracle.xdo.parser.v2.NonValidatingParser.parseAttr(NonValidatingParser.java:1461)
     at oracle.xdo.parser.v2.NonValidatingParser.parseAttributes(NonValidatingParser.java:1394)
     at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1225)
     at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
     ... 17 more

Can´t view photos in full screen after loading photos to dropbox? what to do?, can´t view photos in full screen after loading photos to dropbox? what to do?

after loading photos to dropbox i can´t view them in full screen in iphoto ... i can only view them small ... when i click on them this sign "!" appears... do you know how to fix this????

If you're loading photos to drop box why do you expect to see them in iPhoto?
The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Can only view Mail in full-screen mode

After installing Yosemite, I can only view the main Mail window in Full Screen mode, unless I check "Classic View" in Preferences. Classic view does not help much, because it does not show the preview, which is essential to me. If I exit fullscreen mode, the minimized window appears for a split-second and then disappears down the left bottom corner of the screen and you cannot find it anywhere. The only way to see anything again is to go to Mail - View - Full Screen. Any help is much appreciated.

Yes, I get the mail quit unexpectedly notification, together with a problem report, which is 808 lines but the pertinent part seems to be a CALayer position:
Process:               Mail [476]
Path:                  /Applications/Mail.app/Contents/MacOS/Mail
Identifier:            com.apple.mail
Version:               8.0 (1990.1)
Build Info:            Mail-1990001000000000~3
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           Mail [476]
User ID:               501
Date/Time:             2014-10-29 13:45:47.710 -0700
OS Version:            Mac OS X 10.10 (14A389)
Report Version:        11
Anonymous UUID:        1FB6E94D-94CE-A889-F941-38C1A494F319
Time Awake Since Boot: 1100 seconds
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_CRASH (SIGABRT)
Exception Codes:       0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'CALayerInvalidGeometry', reason: 'CALayer position contains NaN: [720 nan]'
abort() called
terminating with uncaught exception of type NSException

How can I view the USMT recovery key in SQL report

Hello all,
Can anyone help me to provide sql query for below link… What I am looking is Just to create a report with all computers that has computer association any type with the recovery key information.
http://www.windows-noob.com/forums/index.php?/topic/1763-how-can-i-view-the-usmt-recovery-key/
I have tried below but not working so looking for help…..
SELECT TOP (100) PERCENT dbo.v_StateMigration.SourceName, dbo.v_StateMigration.SiteCode, dbo.v_StateMigration.SMPServerName,
dbo.v_StateMigration.SourceMACAddresses, dbo.v_StateMigration.RestoreMACAddresses, dbo.StateMigration.StateEncryptDecryptKey,
dbo.StateMigration.StorePath, dbo.StateMigration.StoreSize
FROM dbo.StateMigration INNER JOIN
dbo.v_StateMigration ON dbo.StateMigration.SMPServerName = dbo.v_StateMigration.SMPServerName CROSS JOIN
dbo.v_UserStateMigration
WHERE (dbo.StateMigration.StorePath IS NOT NULL) AND (dbo.StateMigration.StoreSize IS NOT NULL)
ORDER BY dbo.v_StateMigration.SourceName

Try this.
SELECT Distinct
SM.SourceName,
SM.SiteCode,
SM.SMPServerName,
SM.SourceMACAddresses,
SM.RestoreMACAddresses,
SMT.StateEncryptDecryptKey,
SM.StorePath,
SM.StoreSize
FROM
dbo.v_StateMigration SM
JOIN dbo.v_UserStateMigration UM on SM.RestoreClientResourceID= UM.RestoreClientResourceID
join dbo.StateMigration SMT on SM.SMPServerName = SMT.SMPServerName
WHERE
(SM.StorePath IS NOT NULL)
AND (SM.StoreSize IS NOT NULL)
ORDER BY
SM.SourceName
http://www.enhansoft.com/

Can not view downloaded jpg photos after ios 7 install

I installed ios 7 on my ipad 3. Now I can not view my jpg picture. They show blank.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone esle sends me I can't view the images. Thye are all blank white squa

One more reason to put my iMAC at the curb. I can open and view Picasa photo links when I sign in via Google, but if I'm in Mail and click on the Picasa image link (my own or one someone else sends me) I can't view the images. They are all blank white squares. This started a few weeks ago. Why can't I view Picasa link images through Mail?

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

ICloud Photo Library (Beta) - Can't view older photos from before 2014

Hi All,
I turned on iCloud Photo Library (Beta) on an iPhone 6 and an iPhone 5s. These two phones had different sets of photos at the time. After the synch process completed the two phones now show the same photos. However, only the photos from 2014 are visible on both phones.
Interestingly, if I go to iCloud -> Storage -> Manage Storage -> iCloud Photo Library -> I can see that more photos have been stored than are visible. Storage reports 2600 photos, but I can only view 1800 through the photos application.
I'm hoping this is simply a Beta bug and my photos have not been lost. With luck they will become visible after a future update.
I'm curious if anyone from Apple can confirm this is a known limitation of the Beta. Or if anyone from the community has seen this same behavior.
Thanks

I really wish I could like iPhoto, but I don't know what in the world it is doing, and by locking me out of the Finder access to the iPhoto folder and doing things like duplicating photos without my asking, I've lost trust in this piece of software.
First thing is: It's a Photo manager. That's the basic key thing you need to grasp. Your photo is not the same thing as the file that contans it. That's why Finder access is not relevant. Import the Photo, manipulate the photo - losslessly - and then if you want to use the Photo in a document, upload it, whatever, put it into a new file designed for that purpose.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
So as long as you're hanging on to the idea that Photo=Jpeg iPhoto is never going to work for you.
If you're willing to let go of that - as you do with Addresses, as you do in iMovie, Lightroom, Final Cut, APerture - then you can begin to make sense of iPhoto too.
Regards
TD

I can't view any tv shows on my ipod

I need help, please. I've been trying to view all my tv shows to my ipod. It copied, but I can't view them. There is no Videos > TV Shows > Shows > show episodes link on my ipod. I need help please. Thank you so much

You just simply have to put some information in videos tab. hehe

I can't view the pictures I've downloaded from my ipad to my PC. The only options I have is Tunes, TV, Movies or Apps. How do I view pictures on my PC.

I can't view the pictures I've downloaded from my ipad to my PC. The only options I have is Tunes, TV, Movies or Apps. How do I view pictures on my PC.

What happens when you try to play the actual film ? And have you tried deleting them and (assuming that they're still in the store) redownloading them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page - or going into Edit > Preferences and on the Store tab ticking the 'show iTunes in the Cloud purchases' tick box so that they show in the My Movies part of your library with a cloud icon against it for redownloading) ?
(You can't store films in the cloud, whether they will show there for redownloading depends upon what country that you are in - and if you move countries or if the rights-holder removes them then you also won't be able to redownload them. Ideally you'd be taking a backup copy of all of your downloads, and not relying on being able to redownload them in the future.)

HT1657 I rented a movie a few hours ago and never finished it. I can't view it on my Apple TV nor on my Computer. When I go to rent it again it says you have already rented this movie, but I can't find it anywhere. How do I watch the remainder of the r

I rented a movie a few hours ago and never finished it. I can't view it on my Apple TV nor on my Computer. When I go to rent it again it says you have already rented this movie, but I can't find it anywhere. How do I watch the remainder of the rental?

I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

In MSS, can Managers view information of Future Dated Hires & do EIT entry?

Similar Messages

Maybe you are looking for