In my itunes library I have apps for the ipod. All of the apps were together, and now I have two different sections to my apps. The first one says 44 apps and the second section says 143 apps. When I connect my ipod only the first section goes on
can anyone help me with my apps on my itunes. They have separated for some reason. I have one section of 44 apps and the other has 121 apps. Only the top section will sinc with my ipod because at the side where it says apps, it is only showing the 44 apps and not the section at the bottom
Can you take a screen shot of the iTunes screen and post it? I do not really understand what you mean by different sections.
What model iPod and iOS do you have? Maybe the section that does not sync are not compatible with the iPod.
Were all the apps purchased with one account?
Do you have any Restrictions one that would prevent syncing? Settings>General>Restrictions.
Similar Messages
-
When I export to Word, only the second page is editable. Page one comes in as a picture. Help?
I'm using Adobe ExportPDF.
Here's the file I'm working with. See if you have any luck.
Tad <removed by admin>
Date: Mon, 14 Apr 2014 14:22:31 -0700
From: [email protected]
To: [email protected]
Subject: Re: When I export to Word, only the second page is editable. Page one comes in as a picture. Help? When I export to Word, only the second page is editable. Page one comes in as a picture. Help?
Re: When I export to Word, only the second page is editable. Page one comes in as a picture. Help?
created by StacySison in Adobe ExportPDF - View the full discussion
Hi Jon,
Try placing your curser in the middle and click on that page a few times. Often this will make it available for editing.
Let me know if that works!
Regards, Stacy
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6298150#6298150
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Re: When I export to Word, only the second page is editable. Page one comes in as a picture. Help?
To unsubscribe from this thread, please visit the message page at Re: When I export to Word, only the second page is editable. Page one comes in as a picture. Help?. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe ExportPDF at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
Hello! I have one iTunes library on my iPod and one iTunes library on my computer. When I connect my iPod touch to my PC, however, I cannot find any files in my iPod except for pictures. How can I find the music files so I can add them to my iTunes?
You can't do that.
And before you decide to store any music that you own on a computer at work, talk to your IT department. Many organizations do not permit it for legal reasons. Standard policies are that anything stored on company owned computers is the property of the company. It could not be legally stored on their machines unless you transfer the licenses and all copies, physical and digital, to the company, meaning you no longer own the music. If they were to be audited and could not prove that they own the music, they would be subject to copyright violation penalties. Just use your iPod when you're at the office if you want to listen to music. -
when i connect my ipod to the computer a box pops up and says that itunes cannot locate/read this file, and if the problem persists to uninstall itunes and then reinstall, but i have my own user on the computer, so if i uninstall it on my user will it uninstall it on every user?
Hello BPeery,
I would go through ALL the steps here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Let us know how it goes.
Hope this helps.
~Julian -
I have uninstalled and reinstalled iTunes multiple times. When I connect my iPod Classic I get the following message: The software for this iPod is not installed correctly. Please reinstall iTunes to install the required software. Any ideas?
Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes. You must follow this guide exactly or it will not be successful. Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.
-
when i connect my ipod to my computer it says unknown device however my ipod still charges i can not sync the new music i have on itunes
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do. This device doesn't have a camera in it. When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it. I have an old Nano that has never had this problem at all. Can anyone tell me what to do about this?
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
I plugged my iPod into the computer and it says that my iPod is synced with another iTunes library, but it's not. So all my music and apps are gone. What can I do to remind the computer its the right iTunes library and get all my stuff back?
Same as you would if you bought a pc; copy everything from your old computer to your new one. Then you can just sync everything from the new computer, as you did with the old one.
-
i copied my itunes library via an external hard drive. now when i connect
my ipod to the new computer i can see my music but my apps are disabledHere are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao. -
I have got a new computer and i can no longer do a full sync. Apple always tells me I will lose all my exisiting Apps if I do a new sync. I prefer to purchase Apps on my computer over my iPod because of the smaller iPod. The new computer is recognized by Apple as an allowable new PC.
But this Sync warning is a pain. Plus, when i view my iPod's App icons on my copmputer, I can no longer drag and move them. I have the latest version of iTunes installed. Thank you for your helpSyncing to a new iTunes library or computer will erase your iPod. Only if you back up your device manually before syncing, you can restore it from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
As for your second problem, see if restrictions for app installation and deleting apps are active in Settings/General/Restrictions. If yes, allow to install and delete app again.
Don't forget to authorize your PC in iTunes:
About iTunes Store authorization and deauthorization
Message was edited by: Ingo2711 -
When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??
Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped! -
i plugged in my iphone 4 for the first time to my computer to back everything up. but when i got to the screen to click on "new phone" or restore to the "same phone" i clicked "same phone by accident. now i have all of my old information from my G3s on my new iphone 4. how can i reverse this? please help.
Hi, raneth's boyfriend!
Unfortunately, iTunes was told to restore all data from an old backup onto the new phone, and that cannot be undone.
However, prior to this, iTunes 10 would have also asked to make a backup of the phone before doing the restore. If the user elects to say "yes" to perform the backup, then iTunes would have backed up the phone before erasing it.
Hopefully, that backup will still be available in iTunes, and if so, it would be backed up under the new phone's name prior to it being erased and restored (if the name of the new phone is different to the name of the old phone).
To check if iTunes has a backup of the phone prior to the restore, look in the Devices category in iTunes Preferences. All backups made are timestamped and are identified with the iPhone's name at the time of the backup. Look for:
• a backup of the phone using the new phone's name prior to the erase and restore, or
• a backup with the same date and time as that when the phone was erased and restored (not the date and time AFTER when the phone was erased and restored!). This may be the case if the new and old phones have the same name.
If a backup is available, you can erase and restore again using that backup. The phone will be restored with what would hopefully be the original image of the new phone.
If no backup was made prior to erasing and restoring the phone initially, then there is no way to
undo it, meaning your phone's original data has been lost.
--tonza -
My iTunes library is too large for my iPod classic--can I create a separate library so that I can split the current library and sync the distinct libraries onto separate iPods?
- If the Gmail accounts are IMAP one then if the library is erased and then you use the account old email will be redownload
- Easing the library on the MacBook does not effect what is on the iMac. On the other hand if you deleted the messages in the Mail app on the MacBook then they will deleted from all devices.
-See the middle of the following. It would seem to help in your situation
http://www.howtogeek.com/209517/how-to-stop-your-macs-mail-app-from-wasting-giga bytes-of-space/ -
For some time now, when I connect my iPod to my PC, I'm told my iPod cannot be synced to iTunes because (the file cannot be found). What gives?
Sounds like the file yo are trying to sync to the iPod is corrupted.
Try syncing only one item that plays in iTunes on the computer.
Also see the following since when you downgrade iTunes you have to reset your iTunes library since the older version can't read the updated version of the library. -
When I connect my iphone to the laptop (windows) it makes a sound but i can't see it in itunes or "my computer' I have no idea why....
Setting up your phone "as new iphone" is covered in this article: http://support.apple.com/kb/HT4137
Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise your phone will be wiped during the following sync.
If you have data on the phone you want to save, back up manually:
Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards. Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
Since changing your iTunes library will erase your phone again, do the same process when you change back to your normal PC.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519 -
When i connect my iPod to the computer it does not fully sync. Some of the songs in the library are marked with an ! and it says the songs cannot be found but when the iPod is not connected they are all there. Any ideas? Thanks
I had this problem before. What I did (which is good advice to anyone with electronic copies of music) is to back up all my music to an external hard drive. I then deleted all music from iTunes and copied back across from my external hard drive. Just make sure that under Preferences - Advanced in iTunes, you have iTunes Media folder location set as your C: drive, tick the boxes for "Keep iTunes Media Folder Organised" and "Copy files to iTunes Media folder when adding to library".
Maybe you are looking for
-
BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit
We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar). The setup never finish! It seems that the setup can't validat
-
Windows 7 Pro 64 bit - WIA service won't stay "on"
I have to install a Brother AIO printer/scanner using a network connection. Using a brand new Acer Veriton X275 with 4gB RAM, new HDD, built in graphics card. The printer driver went in, it prints. The scanner though isn't working. Brother (the A
-
I have an old app in my updates but no longer have the app on iTunes and iPhone 4s. How can i remove it? It is beyond annoying, as it constantly has the badge noticfication but can't update the app as it is no longer avaliable. Help!!!
-
good day i have since yesterday a new Monitor with 4K pixel, i am using flash player a lot for my work, but flash player don't work with 4K, does anybody knows when there will be a update so it will work ? Ben
-
Help with java.lang.ClassCastException in JSSE
I need an urgent help. i am writing code in JSSE for getting Server certificater(through SSL) i wrote public class url public static void main(String[] args) try System.setProperty("java.protocol.handler.pkgs","com.sun.net.ssl.internal.www.protocol")