In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?
In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?
Hi rhaughan,
I see that you have concerns about your operating temperature of your computer while using resource-heavy applications such as gaming applications. I have an article that will address some of the concerns you have mentioned:
Mac notebooks: Operating temperature - Apple Support
http://support.apple.com/en-is/HT201640
While there are third-party utilities that measure the temperature of a notebook computer, it is important to understand that these utilities are not measuring the external case temperature. The actual case temperature is much lower. Never use third-party applications to diagnose possible hardware issues—instead, contact Apple or go to an Apple Retail Store or Apple Authorized Service Provider.
You should also see this article for even further information about your fans:
Learn about the fans in your Mac - Apple Support
http://support.apple.com/en-is/HT202179
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden
Similar Messages
-
HT1270 from where can i purchase 4gb RAM for my macbook pro 13'' mid 2012 model?????
from where can i purchase 4gb RAM for my macbook pro 13'' mid 2012 model?????
I would advise if you have to buy it get 8 or 16gb of ram. it will boost your preformance alot.
16 ($109)
http://www.amazon.com/Corsair-Channel-SODIMM-Memory-CMSO16GX3M2A1333C9/dp/B006DI 9PG8/ref=sr_1_18?s=electronics&ie=UTF8&qid=1378735908&sr=1-18&keywords=Corsair+1 6
8gb ($50)
http://www.amazon.com/Corsair-1333mhz-PC3-10666-204-pin-CMSO8GX3M2A1333C9/dp/B00 2YUF8ZG/ref=sr_1_1?s=electronics&ie=UTF8&qid=1378735731&sr=1-1&keywords=Corsair+ 8GB+%282x+4GB%29
4gb ($33)
http://www.amazon.com/Kingston-ValueRAM-1066MHz-Non-ECC-Notebook/dp/B001PYDKWU/r ef=sr_1_48?s=electronics&ie=UTF8&qid=1378735625&sr=1-48&keywords=corsair+4gb+ddr 3+corsair -
Internal HDD installation guide for MacBook Pro 13" mid-2012 model
Hello,
Can someone please share any step by step guides or instructional videos for installing a new internal HDD in a MacBook Pro 13" mid-2012 model. Also, please advise on how to format the new HDD as it is an unformatted one.
Thanks in advance!To format your new HDD, connect it to your MBP and open Disk Utility>Erase. Select Mac OS Extended (Journaled) and then clone the data from the internal HDD to the new external one. You may use Disk Utility>Restore or use Carbon Copy Cloner (third party software) to do the cloning. Test the new HDD via Startup manager and then perform the swap.
Ciao. -
Bluetooth of the Macbook Pro 13 "(mid 2012) with poor signal and constant interruptions
I have a macbook pro 13" mid 2012, no retina display, with OS X 10.9.2 (Mavericks), and your bluetooth device it loses the signal when placing a barrier on the right side of the mac, the output of the optical drive (CD / DVD).
The signal is severely reduced. Just hold the Mac 's right, put my hand in front of the optical drive or turn the machine a little longer and the interference occurs.
I have a set of boxes bluetooth Sony sound and audio is constantly interrupted. I just put my hand in front of the optical drive, at a distance of about 30 centimeters (11.81 inches), and the bluetooth signal (RSSI) fell from -54dbm to -83dbm. The connection was lost completely.
Then I turned the right side of the Mac otherwise the speakers meaning and dropped signal of -54dbm to -75dBm. In this test there were no barriers in front of the optical drive. The audio suffered severe interference. The sound was inaudible.
I did other tests. The same loss occurs with the magic mouse and Apple keyboard bluetooh. Tests done in multiple locations without other nearby connections. Not occurring interference from other devices.
This is a feature of the bluetooth device mac or my computer has a hardware problem?
I thank anyone who can help me.
P.S.: Forgive me for my bad english. I used the Google translator.Hi,
I have exactly your same problem with one bluetooth audio receiver from logitech and one Macbook Pro 13", mid 2012, all the others computer are working without problem in my room except of the Macbook Pro 13", i've tried of one from a friend of mine same model and same problem. I really would like to have a solution for this problem, i have tried with give more quality to the bluetooth agent, using a command from the terminal, but is not really working . Here if you want to try the link where the show it:
http://bencollier.net/2011/04/improve-compressed-bluetooth-audio-on-mac/ -
Macbook pro retina mid 2012 model heating
Hi there everyone,
is it normal for the mbp retina model to get quite warm or hot while using if plugged in. when on battery its fine. Also the charger gets really hot when plugged in to the mbp.. are there any solutions to this issue?Note that the MacBook Pro with Retina display is made of aluminum, and it gets hot quickly. I wouldn't be worried if you feel that the cover is hot. Just to make sure that everything is correct, download Temperature Monitor and tell me the temperature of your MacBook.
Also, the charger may get hot during charge. Again, you shouldn't be worried about that, unless you feel that it's extremely hot -
Help!
i had a problem with my macbook pro: on tuesday 16th (agoust, 2011) I went to a friend's house and show her some document i had in my computer, then i turned off my mac and it asked me: "there are some actualizations available, do you want to update before turn off?" i clicked on yes, waited for update and then the macbook turned off. When I got back home, I tried to turn it on again.... but nothing: it didn't sound baaaammmmm as allways, it didn't reacted. I tried again, but useless.
The next day i went to one of these "authorized management centers", but they coudn't say anything or do anything about it. First they told me the problem was the battery, then the hard disk, then the video card... but don't. I left my mac there by two weeks, hoping they could help me, but they didn't. So I picked it up and go to other place.
The rare thing is that i have just two years with my mac, and i didn't do anything stupid on it (didn't fall, get wet, microwave, hot, shocked, hit or anything) It just stopped working. Two times it turned on. But if not, it's the same story:
When i pushed the button to turn on, sounds like baaaaaammmm, but then again, and again, and again, and the screen doesn't get blue or anything, it appears a foder with a "?" and then the computer turns off...
Im wondering if this is a problem on this computers, because some of my friends told me things much like that that happened with their macbooks.
What's going on??? why this is happening?? cn you help me?This article may help: A flashing question mark appears when you start your Mac.
-
Macbook pro late 2011, version ......DV14 getting very hot
Macbook pro late 2011, versin ....DV14 getting very hot
Bahamaguy wrote:
I have a MacBook pro late 2011 version it's not booting up ....
So what you want is to be able to boot from OS X and retrieve your files
Create a data recovery/undelete external boot drive
Of course if it's not booting up, it's easier to fix in place
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
"Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
Most commonly used backup methods
So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
There is no Startup Manager option to choose what to boot from?
This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
What did you use to make the external OS X USB bootable drive? -
I already install Bootcamp 5 on my Macbook Pro MD101 (Mid 2012) but when I plug the USB, my Mac can not recognize the USB, also any storage device. Pls help !!! I am using Window 7
I ran an Apple Hardware Test, says ''No trouble found'.
-
Macbook pro 15" mid 2012 slow sartup
Hello,
My macbook pro 15" mid 2012 is starting up very slow. It takes more than 3 minutes to startup and then for around a half minute when i open safari it keeps on bouncing in the dock for around half a minute.
Could you please help me speed up my mac?Here is the report:
EtreCheck version: 1.9.11 (43) - report generated 7 June 2014 1:14:48 am GMT+5
Hardware Information:
MacBook Pro (15-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,1
1 2.7 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 7:5:20
Disk Information:
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (506.34 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5970H
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 20
Gatekeeper:
Anywhere
Kernel Extensions:
[kext loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) Support
[kext loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) Support
[not loaded] com.devguru.driver.SamsungACMControl (1.4.16 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.16 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungComposite (1.4.16 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.16 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.16 - SDK 10.6) Support
[not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) Support
[kext loaded] com.protech.NoSleep (1.3.3 - SDK 10.8) Support
[kext loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items:
Freecorder: Path: /Library/StartupItems/Freecorder
Jaksta Music Miner: Path: /Library/StartupItems/Jaksta Music Miner
Problem System Launch Agents:
[loaded] com.paragon.NTFS.trial.plist Support
[failed] com.paragon.NTFS.upd.plist Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.anchorfree.ajaxserver.plist Support
[loaded] com.barebones.authd.plist Support
[running] com.batteryproject.batteryprojectd.plist Support
[loaded] com.charlessoft.pacifist.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.spotflux.Spotflux.plist Support
[failed] com.spotflux.Spotflux.tun.plist Support
[running] com.syniumsoftware.CleanAppDaemon.plist Support
[loaded] net.sourceforge.MonolingualHelper.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
[invalid] org.virtualbox.startup.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[failed] com.protech.NoSleep.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] net.culater.SIMBL.Agent.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[loaded] ca.madefresh.BodegaAgent.plist Support
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.hp.printerAgent.plist Support
[failed] com.plexapp.helper.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
iTunesHelper
Internet Plug-ins:
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
DivX Web Player: Version: 3.0.1.5 - SDK 10.5 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 45 Check version
Safari Extensions:
VKontakte.ru Downloader: Version: 0.2.7.1
ClickToFlash: Version: 2.9.4
AdBlock: Version: 2.6.37
Awesome Screenshot: Version: 1.4.3
SaveFrom.net helper: Version: 2.37
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
BlueStacks Install Detector: Version: Unknown
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
fuse-ext2 Support
Java Support
MacFUSE Support
MagicPrefs Support
NoSleep Support
Perian Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
11% WindowServer
5% Safari
4% storeagent
1% hidd
1% CleanAppDaemon
Top Processes by Memory:
557 MB Adobe Photoshop CC
426 MB Safari
244 MB WindowServer
213 MB Finder
164 MB softwareupdated
Virtual Memory Information:
1.04 GB Free RAM
4.00 GB Active RAM
1.96 GB Inactive RAM
1007 MB Wired RAM
2.70 GB Page-ins
2 MB Page-outs -
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
MacBook Pro 15" Mid 2012 says only supports Windows 7
Hi there,
I have Windows 8 already running on my MacBook Pro 15" Mid 2012 and now I am trying to install the latest drivers. But when I download the drivers via the Boot Camp Assistant it claims my MacBook only supports Windows 7.
I did the manual download on the Windows side of life, but it fails to install, shortly after hitting setup. I guess, it checks the modell and fails.
Also, maybe or maybe not, unrelated in the MacBook's about me it claims to be a 13", where as in the system report it shows the correct information.
Any idea would be appreciated...
Thanks,
Thomashttps://discussions.apple.com/message/21540547#21540547
projectRelentless has some work arounds that may help here specifically:
If you want, try and click setup in this latest BootCamp support set, and you will get another sad error claiming x64 is not supported, something awful to that nature. Awww man, this far, only to get let down. Nope. We are going to fix that. And this is where ErikVanD's post pointed me to what we do next.
It was said to navigate in the BootCamp 5.0.5033 folder to something of the effect of BootCamp/Drivers/Apple and run the MSI file "BootCamp" (MSI file will say Windows Installer in its description, and not necessarily MSI for anyone not too savy with Windows) **note - NOT .bootcamp (notice the period in the front) and it should work and install the new Windows 8 support for your MBP...but in my case it didn't, which is why im posting how i fixed this. Your setup may somehow be different, but mine gave me an error say it "needs elevated permissions to run, use setup.exe instead. We tried that remember! And it gave us the x64 not supported error. Oh man! Blabbing aside, this file needs to be ran as an administrator, which yeah your the only user, but Windows is funny like that. Normally youd just right click, and select run as administrator, but out the box, that option isnt there when you right click, only install, repair, open with etc. Here's the next trick, you need to add a registry file to enable running as an administrator, dont be afraid, this is an old trick, and really easy.
Open notepad in Windows, and create a new doc, call it Add_MSI_run_as_administrator.reg
Paste this following code into the new doc
Windows Registry Editor Version 5.00
HKEY_CLASSES_ROOT\Msi.Package\Shell\runas] "HasLUAShield"="" [HKEY_CLASSES_ROOT\Msi.Package\shell\runas\Command] @=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\ 00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\ 73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\ 00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Or download the file already made from my company server at http://www.theprojectdev.com/public/pub.html **i put this there as a courtesy to help others like me, its just a complete reg file, so either create your own through copy and pasting above or download it. Either way, put it on your desktop.
Now double click the new registry file, and allow/ok it to do its thing.
Once done, you can discard the file from your desktop, or keep, your choice.
Guess What!? Now we can do the impossible! Lets revisit that solution from before by going to the newest BootCamp 5.0.5033, and navigate to BootCamp/drivers/Apple and select that tricky BootCamp MSI file that wouldnt allow us to run, this time RIGHT CLICK it. Because of our new registry entry we placed, we now have an option to "Run as Administrator" Click that option.
WooHoo! We have done what coudnt be done, BootCamp will now walk you through the installer, and add all the great support for Windows 8
Boot Camp Support Software 5.0.5033
http://support.apple.com/downloads/DL1638/en_US/BootCamp5.0.5033.zip -
[Warning] South Bridge Overheat in MacBook Pro 13 mid 2012
There was the news about Apple's MacBook Pro 15 video chip Program when Apple admitted that there is a problem with video card chip in MacBook Pro 15 (2012).
Well I got news for news. I have got a reply from the local service that I got south bridge in my MacBook Pro 13 mid 2012 overheated and as a result no HDD or SDDs will work on my MacBook. I need completely new south bridge on the motherboard to be replaced which will cost me about 320 $.
This is a warning for those guys who have the same model as I do and it is my call to Apple.alabanco wrote:
and it is my call to Apple.
This is a user to user forum only.
Please send Apple Feedback http://www.apple.com/feedback/
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do -
Macbook pro 15" mid 2009 model display "freeze", please help!!!
I have a Macbook pro 15" mid 2009 model which all of a sudden startet "freezing" everytime i restart it, opens spesific programs, etc, and it is really starting to bug me! Sometimes it takes me 15 minutes to start the computer, and then freezes for another 5 minutes when i try to start i.e word.
I currently have the Mac OS X 10.6.8 (snow leopard).
Could this be fixed by a software update of some sort? If not, how can i fix it (if possible at all)?
Thanks!You have provided some good basic information, but I'll need more in order to address our question.
1. When did you notice this problem? Relatively recently, or have you been having this problem for a while?
2. Can you correlate the problem with the installation of new software? Which software?
3. How much RAM do you have? If it's 2gb, that's probably not enough - 4gb is ideal for your unit.
4. Do you update your MBP with software update? Have you updated your browser and plugins?
5. Have you cleaned your MBP? Recently, an increasing amount of users have seen improvement by getting dust from your unit.
6. What programs cause you to freeze, or this happen with all applications? What happens when you notice the freeze? Do you see a spinning wheel? Does the display freeze? Be as specfic as possible.
I realize this is a detailed homework assignment, but answer as completely as you can. This is an answer to your issue - it's just a matter of narrowing things down.
Post in this thread! -
Macbook Pro Retina mid 2012 low fps in bootcamp
Hello,
My English is not so good, so sorry if it's not correct, but I hope anyone could help me.
I have a Macbook Pro Retina mid 2012, 2,3 GHz Intel Core i7, 8 GB ram, 250 GB SSD.
My problem is when I go to bootcamp for gaming I get realy low fps. The most games start at 30 fps, but then they drop immediately to 8/9 fps and a second later back to 30 fps.
It's like a car, when you drive to hard you have to slow down, but then you drive to slow so you need to go faster. He speed up and a second or 2 later he kicks on the brakes and a moment later he speed up again and kicks again on the brakes.
Even with al the game setting on realy low and the lowest resolution. And that al the time in every game. My bootcamp is Windows 8 but in Windows 7 did I have the same problem. I did already a SMC reset and Pram reset and 5 clean installs. But nothing works. I installed al the updates in OS X en in Windows. There al alrealy some forums about this problem, but by them was a SMC reset enough. Maybe something is wrong with my Nvidia grapihc card. The problems starts everytime when the Nvidia card need to do this work.
it's quite an annoying problem, it's not a cheap laptop, but my old laptop ( 2 years old ) are the gaming performs better compared to this one. I think the problems start after this SMC update http://support.apple.com/kb/DL1559?viewlocale=en_US but I'm not quite sure.
Are there more people with this problem, please let me know. And maybe how you solve it.
I hope realy if any one could help me.
If you know a anser, please give it in a comment
Thanks,
Gerwin Tiemens
<Email Edited by Host>Hello gerwintiemens,
I recommend resetting your SMC and your PRAM. Perhaps even a safeboot as well.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
All the very best,
Sterling -
MacBook Pro (Retina, Mid 2012) - Boot Camp/Win 7 - Num Lock Problem
Hey,
I have a client who has a MacBook Pro (Retina, Mid 2012) who is experiencing a problem when booted into Windows 7 via Boot Camp in that he cannot type certain character like # (hash character by keystroke alt + 3) without Windows 7 error bleeping at him. He needs the # character as part of his password for logging into webmail.
The Boot Camp setup has the latest Boot Camp drivers installed (this was a fresh Boot Camp setup/install today) and every other part of the hardware works I suspect that this problem is not a key mapping problem but more something to do with Windows registering Num Lock as being active.
If the problem is that Num Lock is enabled then what is the keystroke to disable Num Lock? I thought it was fn + 6 but did this change since the Unibody MacBooks?
I understand that there are ways of resurrecting number pad fuctionality as decribed in the MacWorld article (see link below) but this is a Mac OS X System Preference and as such would not operate when booted into Windows via Boot Camp.
http://www.macworld.com/article/1142609/ressurect_numberpad.html
Any advice will be greatly appreciated.You have Graphics card problem.
Take it in Hardware problem:
Genius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
see if this applies http://appleinsider.com/articles/12/11/13/some-15-retina-macbook-pro-users-compl ain-of-graphics-issues-after-efi-update
Maybe you are looking for
-
Longstanding Exchange Calendar Sync Bug Persists in iOS 7 / 7.0.2
For those who sync their iPhone / iPad / iPod touch to a Microsoft Exchange e-mail environment, you may be aware that there's a longstanding Exchange Calendar Sync bug (affecting iOS 4.x - 6.1.3). An otherwise functional iDevice may suddenly remain
-
Problem with Save data with report
Post Author: ramprosoft CA Forum: General Hi, I am new to CR and using Crystal Reports XI with SQL Server 2000. I'm not able to remove the saved data in a report. I have played around different options, but unfortunately I'm not able to remove the da
-
I just bought a used Macintosh Color Display from a local thrift store. I have brought it home only to find that the adjustment holes on the back seem to have no effect when a tool is inserted & I attempt to adjust the screen's geometry. For my tools
-
Hi I have a 98 page document with the same bitmap image on every spread. The image has been coloured up with a special colour in Indesign but unfortunately hasn't been set to overprint. I've tried various combinations in find/replace to find the imag
-
Dear all E52 users i need a quick response from u guys that what u consider Nokia E52 ??? Should i purchase that phone?? ( from my pocket money which i dont want to loose) i seen some thresds about its signal reception problem which is said that its