In my opinion, I think the rolling function of Muse need to add the group status function and group!

In my opinion,
I think the rolling function of Muse need to add the group status function and group!
Because when the processing of many things, but the effect is the same,
but to repeat many times, it is necessary to group similar function of PS.

I learned how to install the 9.1.3 upgrade by renaming my app, and that works fine. Logic is now recognized in About My Mac as a 64 bit app, which is where I started. Thanks for your help.
Now I have to figure out how to get my Novation to work through Automap in some way that I can finally get mixer functions. I'll repost the second part of this if I'm still having a headscratcher about it tomorrow.

Similar Messages

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

I keep getting a download error message. I hit retry but tells me I can not download right now. I have been able to download other items. I think the download was interrupted and now it will not continue downloading. Help!

What do I do when a download is interrupted and then will not continue to download?

I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again.

How much will Apple charge me to fix my Ipod Touch 4g? It won't turn on because I think the battery is bad, and the home button doesn't work anymore... and it's not under any warrenty anymore

How much will Apple charge me to have my Ipod Touch 4g fixed? It won't turn on anymore more because I think the battery is probably bad, and the home button doesn't work either... its not under any warrenty either.

Apple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/

I need help contacting someone that can help me find who the previous owner was who set up my iphone 5s, there is an activation lock and i need to contact the owners. help??? i think the iphone was stolen and then sold to me

i think my iphone was stolen before being sold to me, i need help finding out who the original owner was to unlock the phone. any ideas on numbers i could ring? im super gutted

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

My iphone 4 thinks the headset is connected and I can't hear the caller when I answer a call.

The screen displays, :Ringer (headset)" but the headset is not connected. I cannot hear the other party during a phone call. The external speakers do not work when I play my music. I have restored from itunes, but still no luck. I have tried to clear the headset port, but nothing is fixing the problem. Any ideas please?

Most likely you got some form of moisture in the headset jack. There is an indicator inside the jack if you have a pin-light you can look and see.

I have a G5 imac that is using Disk Warrior as the start up disk and can't change back.

I am using a G5 imac (OS 10.4.8 I think the last update is) and I was attempting to use Disk Warrior to recover a lost file. On my other Macs you made Disk Warrior the start up disk to use it, which I did here but I think that was a mistake. Now I can't change back to the regular start up disk.
I tried starting in safe mode but I think I'm getting kernel panic because it goes to a gray screen and tells me to restart.

I don't think Disk Warrior does file recovery. See:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

I can no longer see my iPods names with the new look iTunes and also don't know where to sync it when I've added songs.

The old version I could see the name of my iPod but now I can't! I also used to be able to sync my iPod but I can't see anywhere to do this now! Any help greatfully received!

The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
With iTunes 11.0.3 and later you can enable artwork in the Songs view from View > Show View Options (CTRL+J) making it more like the old Album List view
View > Show View Options (CTRL+J) also contains options to change the sorting of grid based views
Turning on the sidebar should make things easier.
tt2

Linking the system status to user status.

Dear all,
In the customising we have the provision of creating user profile. My requirement is if the system status is having a certain value like ESTO - in the equipment master then this should automatically set the defined user staus and prevent user from modifing the record (equipment master) and when the system staus is changed as AVLB, then the user status should also change and permit user to modify the record.
Experts help is expected.
Can anyone suggest any method of adopting the same - is there any settings for this.
Regards,
M.M

I was able to get the statuses in a table , and as theer are more than one entry fo each of teh WBS so I need to concatenate the systme statuses together and user statuses togerher and finally concatenate the user status and system staus togehter in one field .
SO like fo system status I ahve 3 entreis , I need to concatenate them into one . But somehow when I loop and try concatenating them only the last entry is registeredd and similary for the user status too . Is there a= way I can concatenate so all teh three entries show in like a string
Right now the system status are AVEC, CTRD, SYST in my internal table as three values , how do i concatenate them into one string?
Thanks

Restrics the Order status

Dear all
Is there any status in BS22 for REL status to restric any change in order Quantity.
i.e, if order has status REL then it should not allow to change the qty of process order.

Dear,
It is not possible to restrict the quantity change through system status through BS22.
You need to created the user status BS02 and then assign to your order type OPJH.
Please follow these steps,
1. Create a status profile Eg: 0001 usng t.code BS02.
2. Enter status no. as 1, status as CRTD, a description, tick Initial status & lower status no. as 1 & higher status no. as 2.
3.In the second line enter status no. as 2, status as REL, a description, & lower status no. as 1 & higher status no. as 3.
4.Choose Object type tab.
5. Choose PP/PM: Order header.(tick)
6.Then come back to main screen & double click REL.
7.Click the create icon in the top.
8.Choose Release & then choose radio button under SET.
9.Then come back to main screen & again double click REL & then choose create & select change & check the radio button under FORBID & then save.
10. In t.code OPJH(order type), choose your order type & then assign the status profile( Eg:0001)
11.Now convert the planned order into production order.Release the order & save.
Regards,
R.Brahmankar

When i'm in the music player function, and i turn my ipod to lanscape view, i start to roll the albums and then the ipod exit form the musicplaying suddenly -_- why? please help me

When i'm in the music player function, and i turn my ipod to lanscape view, i start to roll the albums and then the ipod exit form the musicplaying suddenly -_- why? please help me

Did you try to reset the device by holding the sleep and home button until the Apple logo comes back again?

When we purchased our mac two years ago, we set up the iCloud account. this past winter I created a new iCloud account thinking I was changing it. I now cannot access anything on the old iCloud acct and my computer hasn't been backed up either in awhile

when we purchased our mac two years ago, we set up the iCloud account. this past winter I created a new iCloud account thinking I was changing it. I now cannot access anything on the old iCloud acct and my computer hasn't been backed up either in awhile. How do i go back to that old account and delete it so that I can continue backing up on the newest account? I changed it because the original one I created an iCloud account with is a yahoo account email address and I am deleting my yahoo account for being compromised too may times.

Well, you can go to Manage your Apple ID and change the password if you can answer the Security Questions:
Apple - My Apple ID
If you cannot remember the Security Questions you can contact iTunes Support to reset them for you:
New iTunes Support - US and ww
Once you get your password reset and you can access your account info on Manage your Apple ID, you can change your ID. You won't be able to use the same email address that you are using for the new ID unless you change that one to something else. But, if you can get back into your old ID and change it to a new email address, then you can go on using that old ID, and just manually move the iCloud stuff you added to your new ID back onto the old one. Most of the stuff (like Contacts, Calendar, Notes) can be added by logging onto https://www.icloud.com on your Mac and doing it that way (it is a lot simpler when you have an actual keyboard in my opinion)
Hope this helps you to sort out the two ID business. If you have any questions, please post back!
Cheers,
GB

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. This was the early 90's and I've been trying to hunt it down

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. It was animated, 2D i believe. This was the early 90's and I've been trying to hunt it down. I think there was some kind of animal in it, a giraffe maybe?

Could you be thinking of Microsoft Home's "Fine Artist" for Macintosh, as shown in this Amazon.com listing? This program was bundled with the Performa series of Macs during the mid-90s.

OWB bugs, missing functionality and the future of OWB

I'm working with OWB for some time now and there are a lot of rough edges to discover. Functionality and stability leave a lot to be desired. Here's a small and incomplete list of things that annoy me:
Some annoying OWB bugs (OWB 10g 10.1.0.2.0):
- The debugger doesn't display the output parameters of procedures called in pre-mapping processes (displays nothing, treats values as NULL). The mapping itself works fine though.
- When calling selfmade functions within an expression OWB precedes the function call with a constant "Functions." which prevents the function from being executed and results in an error message
- Occasionally OWB cannot open mappings and displays an error message (null pointer exception). In this case the mapping cannot be opened anymore.
- Occasionally when executing mappings OWB doesn't remember changes in mappings even when the changes were committed and deployed
- When using aggregators in mappings OWB scrambles the order of the output attributes
- The deployment of mappings sometimes doesn't work. After n retries it works without having changed anything in the mapping
- When recreating an external table directly after dropping the table OWB recreates the external table but always displays both an error message and a success message.
- In Key Lookups the screen always gets garbled when selecting an attribute as a join condition
- Usage of constants results in aborts in the debugger
- When you reconcile a table used in a key lookup the lookup condition sometimes changes. OWB seems to remember only the position of the lookup condition attribute but not the name.
- In the process of validating a mapping often changes in the mapping get lost and errors occur like 'Internal Errors' or 'Null Pointer Exceptions'.
- When you save the definition of external tables OWB always adds 2 whitespace columns to the beginning of all the lines following 'ORGANISATION EXTERNAL'. If you save a lot of external table definitions you get files with hundreds of leading whitespaces.
Poor or missing functionality:
- No logging on the level of single records possible. I'd like the possibility to see the status of each single record in each operator like using 'verbose data' in PowerCenter
- The order of the attributes cannot be changed. This really pisses me off expecially if operators like the aggregator scramble the order of attributes.
- No variables in expressions possible
- Almost unusable lookup functionality (no cascading lookups, no lookup overrides, no unconnected lookups, only equal condition in key lookups)
- No SQL overrides in soruces possible
- No mapplets, shared containers or any kind a reusable transformations
- No overview functionality for mappings. Often it's very hard to find a leftover operator in a big mapping.
- No copy function for attributes
- Printing functionality is completely useless
- No documentation functionality for mappings (reports)
- Debugger itself needs debugging
- It's very difficult to mark connections between attributes of different operations. It's almost impossible to mark a group of connections without marking connections you don't want to mark.
I really wonder which of the above bugs and mssing functionality 'Paris' will address. From what I read about 'Paris' not many if at all. If Oracle really wants to be a competitor (with regard to functionality) to Informatica, IBM/Ascential etc. they have a whole lot of work to do or purchase Informatica or another of the leading etl tool
vendors.
What do you think about OWB? Will it be a competitor for the leading etl tools or just a cheap database add on and become widely used like SAB BW not for reasons of technology or functionality but because it's cheap?
Looking forward to your opinions.
Jörg Menker

Thanks to you two for entertaining my thoughts so far. Let me respond to you latest comments.
Okay, lets not argue which one is better.. when a tool is there .. then there are some reasons to be there...But the points raised by Jorg and me are really very annoying. Overall I agree with both yours and Jorg's points (and I did not think it was an argument...merely sharing our observations with each other (;^)
The OWB tool is not as mature as Informatica. However, Informatica has no foothold in the database engine itself and as I mentioned earlier, is still "on the outside looking in..." The efficiency and power of set-based activity versus row-based activity is substantial.
Looking at it from another way lets take a look at Microstrategy as a way of observing a technical strategy for product development. Microstrategy focused on the internals (the engine) and developed it into the "heavy-lifting" tool in the industry. It did this primarily by leveraging the power of the backend...the database and the hosting server. For sheer brute force, it was champion of the day. It was less concerned with the pretty presentation and more concerned with getting the data out of the back-end so the user didn't have to sit there for a day and wait. Now they have begun to focus on the presentation part.
Likewise this seems to be the strategy that Oracle has used for OWB. It is designed around the database engine and leverages the power of the database to do its work. Informatica (probably because it needs to be all things to all people) has tended to view the technical offerings of the database engine as a secondary consideration in its architectural approach and has probably been forced to do so more now that Oracle has put themselves in direct competition with Informatica. To do otherwise would make their product too complex to maintain and more vendor-specific.
I am into the third data warehousing/data migration project and my previous two have been on Informatica (3 years on it).I respect your experience and your opinions...you are not a first timer. The tasks we have both had to solve and how we solved them with these tools are not necessarily the same. Could be similar in instances; could be quite different.
So the general tendency is to evaluate the tool and try to see how things that were needed to be done in my previous projects can be done with this tool. I am afraid to say .. I am still not sure how these can be implemented in OWB. The points raised by us are probably the fall out of this deficiency.One observation that I would make is that in my experience, calls to the procedural language in the database engine have tended to perform very poorly with Informatica. Informatica's scripting language is week. Therefore, if you do not have direct usability of a good, strong procedural language to tackle some complicated tasks, then you will be in a pickle when the solution is not well suited to a relational-based approach. Informatica wants you to do most things outside of the database (in the map primarily). It is how you implement the transformation logic. OWB is built entirely around the relational, procedural, and ETL components in the Oracle database engine. That is what the tool is all about.
If cost is the major factor for deciding a tool then OWB stands far ahead...Depends entirely on the client and the situation. I have implemented solutions for large companies and small companies. I don't use a table saw to cut cake and I don't use a pin knife to fall trees. Right tool for the right job.
...thats what most managers do .. without even looking how in turn by selecting such a tool they make the life tough for the developers.Been there many times. Few non-technical managers understand the process of tool evaluation and selection and the value a good process adds to the project. Nor do they understand the implications of making a bad choice (cost, productivity, maintainability).
The functionality of OWB stands way below Informatica.If you are primarily a GUI-based implementer that is true. However, I have often found that when I have been brought in to fix performance problems with Informatica implementations that the primary problem is usually with the way that the developer implemented it. Too often I have found that the developer understands how to implement logic in the GUI component (the Designer/Maps and Sessions) with a complete lack of understanding of how all this activity will impact load performance (they don't understand how the database engine works.) For example, a strong feature in Informatica is the ability to override the default SQL statement generated by Informatica. This was a smart design decision on Informatica's part. I have frequently had to go into the "code" and fix bad joins, split up complex operations, and rip out convoluted logic to get the maps to perform within a reasonable load window. Too often these developers are only viewing the problem through the "window" of the tool. They are not stepping back and look at the problem in the context of the overall architecture. In part Informatica forces them to do this. Another possible factor is they probably don't know better.
"One tool...one solution"
Microstrategy until recently had been suffering from that same condition of not allowing the developer to create the actual query). OWB engineers need to rethink their strategy on overriding the SQL.
The functionality of OWB stands way below Informatica.In some ways yes. If you do a head-to-head comparison of the GUI then yes. In other ways OWB is better (Informatica does not measure up when you compare it with all of the architectural features that the Oracle database engine offers). They need to fix the bugs and annoyances though.
.. but even the GUI of Informatica is better than OWB and gives the developer some satisfaction of working in it.Believe me I feel your pain. On the other hand, I have suffered from Informatica bugs. Ever do a port from one database eingine to another just to have it convert everything into multi-byte? Ever have it re-define your maps to parallel processing threads when you didn't ask it to?
Looking at the technical side of things I can give you one fine example ... there is no function in Oracle doing to_integer (to_number is there) but Informatica does that ... Hmm-m-m...sorry, I don't get the point.
The style of ETL approach of Informatica is far more appealing.I find it unnecessarily over-engineered.
OWB has two advantages : It is basically free of cost and it has a big brother in Oracle.
It is basically free of cost...When you are another "Microsoft", you can throw your weight around. The message for Informatica is "don't bite the hand that feeds you." Bad decisions at the top.
Regards,
Dan Phillips

I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw)

Processor 3.4 GHz Intel Core i7
Memory 16 GB 1333 MHz DDR3
I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive. It is telling me the harddrive is full and is not functioning correctly. How can I adjust so that all files are managed on the harddrive rather than the SDRAM. (BTW - design flaw here.)
Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

I was confused by this statement
It is telling me the harddrive is full and is not functioning correctly.
OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD. Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them. There is no design flaw between your ram and HDD. Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
I would do three things. First I would create a backup, backups are important. Second, I would reboot into recovery and repair my HDD. Lastly while still booted in recovery I would repair permissions.
Can you capture a screen shot of the exact error you are getting?

In my opinion, I think the rolling function of Muse need to add the group status function and group!

Similar Messages

Maybe you are looking for