In Place Discovery Search - "Search in Progress", not progressing?
Hi,
When I click SAVE to run the In Place Discovery Search, it just seems to stay "in progress" and never complete.
I can run an estimate on the search and it seems to work fine.
No errors to report?
Suggestions?
Hi,
From your description, if you select "Estimate the search result", it succeeds. But if you select "Copy the search results to the destination mailbox", it will be in progress. If I have misunderstood your concern, please let me know.
In your case, I recommend you click Refresh and check the result. In my environment, when I do the discovery search, it also displays "Search In progress" for a long time, but when I click Refresh, it displays the discovery result immediately.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support
Similar Messages
-
Search and Address bar not working.
Hello, I have this problem were whenever I try to type in something into the search or addresys bars, nothing happens. It's like the enter key isn't working. There is not usual picture next to the search bar (the one that shows you what search engine you're using. If it's google it shows a "g" next to the bar). Instead there is just a picture of a blank page as a placeholder. When I try to go in and add a new search engine by managing the search engine list, there is no option to add a new search engine. I have already tried going into the firefox folder on my computer and deleted the formhistory.sqlite file that is the supposed problem. No avail. I have even gone so far to delete and reinstall firefox to my computer. Well, that didn't work either. So I waited until the next update to see if my problem would be fixed THEN. I am currently on firefox 19.0, which is, as of writing, the most current version. I have tried restarting firefox with all addons removed. And for good measure, I deleted anything that ended with ".sqlite" in my firefox folder. I have tried to get the the about:config menu but do not know how considering how my address bar refuses to search. The greatest thing is that my address bar can still remember all the sites I've typed into it before, but for some unknown reason, cannot take me to any of them! I really don't know what to do next. I can only suppose that I could try completely deleting everything firefox has stored on my computer, as I don't know if just uninstalling the program actually did that. Other then my search bar problem, firefox has been acting fairly normally besides a few minor hiccups here and there. I am trying to remember if I downloaded anything before my search bar problems started or not, but it is always a possibility. I did download the firefox beta for windows 8 metro mode but I can't remember if that was before or after firefox started acting up. It's possible considering that softonic thought they were being really nice by including fbdownloader for free with my firefox metro browser. I am now no longer using softonic ever again. But that's all the evidence I can think up right off the tip of my head. Sorry if this was kinda long, and if any of my description isn't clear or make sense please ask and I can try to verify. Also, if I haven't said this already, my search bar is only not working in firefox. Chrome, Internet Explorer, and Safari are all working fine. Just my luck, I guess. If anyone could help me out, I'd be much obliged. Not being able to use the address bar has been really inefficient. Thank you.
This is the solution I got:
on:
;-please follow these steps:
1. Enter about:config in the Firefox location bar and press Enter.
You should see a warning that making changes to the Firefox configuration can be potentially harmful to Firefox's integrity. Click the I'll be careful, I promise button to continue.
2 In the Search box at the top, enter keyword as the search term. You should see a few remaining items, one of these is keyword.URL. It should be bold.
3 Right-click on the keyword.URL setting and select MODIFY from the dropdown menu.
enter your favorite search engine
In my case
I entered
https://www.google.com/search?q=
And that was a super fix
for more cool stuffs like [http://example.com website Alexa ranking ] -
I just got an iphone 4s. Now the search iphone function is not working. When I swipe the start screen, the search box shows up. But when I type what I want to search, there is no action. Please help.
Try this...
You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On... -
It seems that all apple products used in my house at times will not connect to our wifi. It's hit and miss. It says I am connected, but when you try to connect to any search engine it does not. I have disconnected and reconnected the power to the dsl provider and to our wifi units. I have rebooted the computers. I have reentered the password. Still no connection. We do not have connectivity issues with our PC products. Anyone have any answers for me?
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Problem in Search Help[F4] - Values Not being Dsplayed
Hi,
Search help values are not being displayed.
F4 help pop up is being displayed with the text on top: ' xxxx number of entries found".
But no values are visible in that popup where it normaly displayes all values for selection. This is happening with all search helps.
Example: I tried for Tcode: ME21, for field Vendor.
=><i>No patch has been applied on Server recently.</i>
Any clue on that..??
Any help is appriciated.
Regards,
Vijay RahejaHello Vijay,
This is simple as well.
Go to help then settings and then F4 help. Under system defaults tab strip you will find Display tab strip. Here go to change mode and choose dialog. The other choice will be for control only ( 2 radio buttons only this time around). However to do so make sure you have the authorization object S_ADMI_FCD with value TCTR.
Ask yoru authorization adminstrator to make these changes. He would be having these authorizations. Normally all users dont have this authorization as this is part of security audit considerations.
Please award points if issue got solved.
Regards.
Ruchit. -
After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.
Have you run it in a debugger? That will show you exactly what is happening and why.
-
am trying to connect my wireless keyboard to my apple tv and it stays in a searching mode and does not pick it up. help
Welcome to the Apple community.
There probably isn't a lot you can do, since the router settings will be beyond your control. Many such services in hotels and the like, use a system whereby you need to login through a webpage, since the Apple TV cannot display webpages, there is no way around this. You would probably be best asking at reception if this is the case. -
Search for photo's NOT in Album
Is there a way to search for photo's not in an album?
Huh? Not sure at all what you are saying.
Camera Roll photos are photos that were taken with/saved from the iphone itself. Those are not part of the sync process at all. You import those as you would with any digital camera.
Photos/albums that you sync ( via itunes) from your computer to your will appear under photo library and the individual albums that you selected under "photos" in itunes
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
[SOLVED] search just package name (not description) with yaourt
Is there a way to search just package names (not package descriptions) with yaourt or pacman? I'm imagining something like this:
$ yaourt -Ss --pkgname-only xterm
Thanks!
Last edited by partner55083777 (2010-02-03 16:30:43)My question still stands as to how I can search just package names. If it is using another program other than yaourt or pacman, that is okay.
"yaourt -Ss SEARCH_STRING" has been working as stated in the documentation for me (with yaourt-0.9.2.6). It will return all packages that have SEARCH_STRING in either the package name or package description.
Here are the first three results when running this command:
$ yaourt -Ss emacs
extra/emacs 23.1-3 [installed]
The Emacs Editor
extra/snd 10.1-1
Snd is the emacs of sound editor
extra/texmacs 1.0.7-3
GNU TeXmacs is a free scientific text editor, which was both inspired by TeX
and GNU Emacs. WYSIWYG editor TeX-fonts and CAS-interface (Giac, GTybalt,
Macaulay 2, Maxima, Octave, Pari, Qcl, R and Yacas) in one.
$
It looks like it works as specified in the man pages:
-s, --search <'regexp'>
This will search each package in the sync databases for names or descriptions that match regexp.
When you include multiple search terms, only packages with descriptions matching ALL of those terms will be returned.
Last edited by partner55083777 (2010-02-02 22:10:24) -
Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
I had absolutely no problems before with Snow Loepard.
I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly. -
The Help Tab (OSX ML) where you search for something does not work
If I click "Help" and then search "expand" it will show me where expand is. But in CS6 when I clicked it the command would go through and pull up the page to expand pixels. Instead, I have to go find it. It works in every other Adobe app I use except Photoshop CC.
I am on the latest version and on CCHi Peter
Thanks a lot for your help (and sorry for not having answered quicker, but my boss gave me a more urgent task last week...).
Anyway, I did what you suggested (re-importing into a brand new project), and then the search for synonyms really worked! But, being a sceptical person, I did the same with another project, and with that one, it did not work. So, what I did next was compare all the settings of these two projects, and I found a difference.
RH8 now contains a function that's called 'Teilzeichenfolgensuche' (I don't know the English expression, but have a look at the attached picture: this is a screen shot from the second page when I generate WebHelp). After having done several tests, I came to the following conclusions:
Search for synonyms does not work in HTML-Help, but it does work in WebHelp (and maybe others, but they are not relevant for me, so I did not test them);
Search for synonyms does only work, when the function 'Teilzeichenfolgensuche' is NOT activated.
Could maybe somebody test this, too, and post here whether my conclusions are really correct?
Btw: This fact is not mentioned in the RH-Manual; actually, this function 'Teilzeichenfolgensuche' is not even mentioned there (at least not in the German edition)!!!
Can hardly wait to see your feedback; thanks again for everybody's support!
Kurt -
General search form with JQuery not working
Hi,
I tried to use jquery to submit a search form because I need some checking before submit. However, it did not go to search results page, but went to home page instead.
Here is my html:
<form name="catsearchform96767" id="generalSearchForm" method="post">
<p><label style="opacity: 1;" for="f-search">Search</label> <input type="text" name="CAT_Search" id="f-search" /> <button type="submit">GO</button></p>
</form>
Javascript:
$('#generalSearchForm').submit(function(){
$(this).attr('action', '/Default.aspx?SiteSearchID=1060&ID=/search-results');
$(this).unbind().submit();
return false;
It does not work with JQuery. But when I moved form action url from jquery to html, it worked. Any ideas? Cheers.Hi David,
Below is the complete code I have used to load the current user to the people picker in SharePoint 2013.
$(document).ready(function(){
SP.SOD.executeFunc('sp.js', 'SP.ClientContext', LoadCurrentUser);
function LoadCurrentUser() {
var context = SP.ClientContext.get_current();
var siteColl = context.get_site();
var web = siteColl.get_rootWeb();
this._currentUser = web.get_currentUser();
context.load(this._currentUser);
context.executeQueryAsync(Function.createDelegate(this, SetPickersToCurrentUser), Function.createDelegate(this, LoadUserfailed));
function LoadUserfailed() {
alert('failed');
function SetPickersToCurrentUser()
var loginName = this._currentUser.get_title();
SetPeoplePicker('Order Team', loginName);
function SetPeoplePicker(fieldName, userAccountName) {
var peoplePickerDiv = $("[id$='ClientPeoplePicker'][title='" + fieldName + "']");
var peoplePickerEditor = peoplePickerDiv.find("[title='" + fieldName + "']");
var spPeoplePicker = SPClientPeoplePicker.SPClientPeoplePickerDict[peoplePickerDiv[0].id];
peoplePickerEditor.val(userAccountName);
spPeoplePicker.AddUnresolvedUserFromEditor(true);
Let me know if you have any questions. I will help you out!
-Praveen.
ASP.NET and SharePoint developer
Blog: http://praveenbattula.blogspot.com
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you. -
Resume Keyword Search in iRecruitment is not working or fetching any record
The following notes in the MOS did not resolve the issue.
How does Keyword Search Work in iRecruitment? (Doc ID 732817.1)
Candidates Keyword Search Function is Not Working in iRecruitment (Doc ID 286502.1)
Find Candidates and Resume Search Functionality in Oracle iRecruitment (Doc ID 1069297.1)
Resume Keyword Search On Candidates Returns No Rows (Doc ID 330512.1)
Checklist to Search Resumes in iRecruitment (Doc ID 401364.1)
Why Does Resume Keyword Search and Document Preview not Work in iRecruitment in Some Platforms? (Doc ID 466991.1)
Bug 6264742 - APPSST10203: IRCTXIDO1.SQL FAILS BECAUSE OF INSO_FILTER
What could be the Cause? Any guidance on how to debug the issue.You can easily get it from
About this page -> Business Component Reference Details -> View Objects
You can analyse these View Objects Query and can get Table Name.
Thanks -
when opening a new tab, it opens onto a search engine, which is not what i want it to do. How do i resolve this and change it back to just a black page?
A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode -
ATG Search | Query Rules are not executing
Hi,
We want to put some search relaxation, for example partial entry of a search term returns results i.e.if user enter "shi" results should show all shirts.
Followed following steps for that,
1) Created query rules for wildcard pattern with a actions.(For example created a pattern "shi*" and action "prop,string,displayName,Shirt" , so that when a user enter "shi", search results would return all products whose name contain "Shirt" or "Shirts".
2) After indexing, verified Query Rules are applied; using "Index Review" (QueryRuleLoad -- 4 rules, 4 patterns, 4 actions, from stream)
3) Layered the component /atg/commerce/search/catalog/QueryRequest property ruleMode to exec so that search request contain "ruleMode=exec" as per ATG docs.
4) Clear and Disable cache using the component : /atg/search/routing/CacheService/
5) Search submitted on site for "shi".
6) Verified Search request XML that "ruleMode=exec" is being send to Search Engine.
But as per query rules, search results/response are not coming, verified response XML, but didn't find any clue.
Are we missing any configuration for query rules to execute or the pattern & action which we have created are not proper ?
Thanks,
SarbajeetHi ,
According to your description, my understanding is that you want to configure Query Rule for the SharePoint Contextual Search (by default its result page is osssearchresult.aspx).
As far as I know, the Query Rules
work in the SharePoint Contextual Search when you define them on site level. You can create your query rule in
your Site -> Site Settings -> Search -> Query Rules.
Meanwhile the SharePoint Contextual Search is based on the result sources defined in the Site Settings->Search -> Result Sources, you need to make
the result source of your Query Rule to the above Result Source.
Reference:
http://sharepoint.stackexchange.com/questions/64393/where-to-define-query-rule-and-when
Best Regards,
Eric
Eric Tao
TechNet Community Support
Maybe you are looking for
-
I need to know what order various objects are created and processed. An example will be most helpful. class A { A() { myFunc(); } public void myFunc() {} class B extends A { class innerB { public void funcInnerB() { ... do some work ...
-
Hello, I have a tar file that I created that is over 19gb in size. I can open the file in File Roller and I can see the contents with tar -tvf filename.tar however, when I try to extract the files from the tar, I get no output, and the command comple
-
I click the + button to open a new tab and it doesn't do anything, not even open a new tab. I try to right click and open a new tab and still don't work. But if I right click a link and click open in new tab it will work. How do I get to open my tabs
-
Joining tables from two different databases
Hi, I am trying to join W_DAY_D from 1 database to another 2 database to the fact table . The datatype for CALENDER _DTis (DATE) from W_DAY_D and the Create date from fact table is TIMESTAMP . I changed the the datatype in the phyiscal layer for CRE
-
VF04 - Error System error in: table: report: LFMRIF02 routine: SET_NUMBER
Hi guys, I'm currently getting an error when I run VF04 with more than 999 sales orders. The error which I'm getting is:- "Error System error in: table: report: LFMRIF02 routine: SET_NUMBER" Upon further debugging, I found out that Buzei is the li