In po amount the dot and cama is exchanged

hi masters,
i m working on po. when i take the print preview of po then it exchange the cama and dot in amount field. means if i have to print 12,123.23 then it prints 12.123,23. but in me21n t.c. while creating po it shows correct. i have copied the medruck script and now i m working on that. plz suggest any solution.

the format of data , currency wiil be taken from user setiings ....
First of all u decide what settings u r going to use ....
if u r going to any specific irrespective of user setting , u can set the country in scripts,....
if u want to print the format as per the user settings u leave as it is ....
Now if u want to change ur user settings do the following ...
Goto Settings -> User Profile -> Own data -> select defaults tab
there u can select date , decimal and time formats ....
Hope this will helps ...

Similar Messages

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

How do I get the Basic and camera calibration sub panels in the develop modual to come back after they go away on there own?

I was working on images and then when I picked a different image the basic and camera calibration sub panels disappeared. How do I get them back?

Right click on one of the other headers and a popup will appear and you can select the ones you need to view.

HT4623 how do i restore the safari and camera icons?

how do i restore the safari and camera icons?

Another thing that can happen is they get lumped together (or with other apps) by accidental screen touching. Mine ended up together in a folder called 'photography'. I just held my finger on it until they were wobbly, and dragged them out to the desktop.

I was typing a n e-mail to my friend. I put the iPad down to answer the door and came back a few minutes later. The screen had gone blank and when i tried to get the message that i was typing back I could not find it. It was a lot of typing and pictures.

I was typing an email to friend. I put the ipad down to answer the door and came back a few minutes later and the screen had gone blank and when I tried to get the message that I was typing back I could not find it. The message contained a lot of text and pictures. How can I find it? I have looked in drafts.

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

I just rented a movie and waited 2 1/2 hrs for it to download, which is fine, but when I paused it to run to the kitchen and came back and resumed...it said "Ready to play in 5 hours and 16 minutes. What in the world!? My 24 hrs will be up b4 I can watch

I just rented a movie on my Apple TV and waited 2 1/2 hrs for it to download, which is fine, but when I paused it to run to the kitchen and came back and resumed...it said "Ready to play in 5 hours and 16 minutes. What in the world!? My 24 hrs will be up b4 I can watch

You must have a slower connection if it took 2.5 hours, did you pause it or exit out to the main screen? I've paused movies many times and it resumes..it could be due to the connection as well so what is your actual speed? Check www.speedtest.net Wifi or ethernet? Have you changed the DNS settings?

Ignoring the dot and Minus Symbol

Hello ABAPpers,
I have a field WRBTR(Amount in document currency) whose value contains the dot as well as minus symbol.
I have to ignore this value.
Is their any function module or the standard method to ignore this value.
Please reply.
Regards,
Rahul

hi,
just declare another integer variable and use this code...
data w_temp type i.
if WRBTR < 0.
w_temp = 0 - WRBTR.
else.
w_temp = WRBTR.
endif.
write w_temp. " this will ignore - as well as dot.
Regards,
Siddarth

How to display the actual reading alone the dot and conditional change the color of the dot/figure if it is over / below an alert figure

Hi,
Please help on how to achive the subjected... Thanks

Hi,
You have to explain your problem clearly with as much details as possible including the version of the SQL you are using so that everyone here can understand. From the title of your post it looks like that you want to change the color of the data series
marker (the dot in the picture above) in a SSRS chart.
If I have understood you correctly then here is how you can do it.
1. Select the data series properties. Select and right click on the line in the chart in design mode. Then click on "Series Properties" and go to the properties tab for "Markers". Under "Marker Color" drop down select the expression
and set the expression as shown in the picture. Replace "Field!Qty.Value" with appropriate field and the criteria for the upper and lower bound you want with their respective color.
2. You can see in the snapshot below that the color of January Month has changed to Red since the qty value is less than 300 as set in the expression above.
--sIbu

Do I Need the lens and camera profiles?

I have been using Photoshop Elements for lots of years (currently on PSE 12). Today I discovered over 400MB of Adobe lens (LCP) and camera (DCP) profiles. It appears that the files have been on my system for many years. None appear to be for any cameras I have.
Do I need these for PSE? Can I just delete them?
-- Larry
PS: I know they are not causing any problems but I kind of like to keep things clean. There are over 2300 such files.

Those are installed with photoshop elements and updated when you update the camera raw plugin and also are used by the adobe dng converter, so leave them and do not delete them.
If in the camera raw dialog you go to the Camera Calibration tab and look at the Camera Profile, those are part of the above files your asking about.

Exchange 2010 transfer of the license and uninstall old Exchange

Hello everyone,
I had some problems with my old Exchange 2010 as it was freezing from time to time. I decided to install a new Exchang 2010 server. I transferred mailboxes, MX record stays the same and I routed all e-mails to the new server now. I disconnected other server
from the network to test is everything working fine and so far so good.
My bigger concerns are following now:
a) how to transfer license as I wanna use the same license key which old server uses.
b) How to Uninstall old Exchange 2010 server.
In regards to license transfer I don't want to get to the point where I am going to get message that I used the same license key on another server. Do I have to deactivate license on the old server? How do I do that. Maybe uninstallation of it will send
a signal to Microsoft that license is gone. Has anyone come across this kind of issue? So what do you think should I uninstall old server first before I enter this license?
In regards to my second question which is related to the first one. How do I properly remove old Exchange 2010 server. I found some instructions that I should just go to "programs and features" and uninstall it this way or run a setup from CD.
Other instructions says that I should uninstall database over power shell and uninstall public folders etc. I would like to do it as clean as possible as I don't want my new exchange or any of DCs to look for missing Exchange later. Which option properly uninstalls
Exchange 2010 from my domain and from AD. I wanted to add that my Exchange2010 are on Windows Server 2008 R2.
I just wanted to add that I phoned Microsoft to ask about it but they said that I have to pay for support otherwise they can't help me. What would you do first? license or uinstallation of old Exchange 2010? I still have over 100 days of trial on new build
server.

Hi,
1. Arbitration mailbox is used to store organization-wide data such as administrator audit logs, metadata for eDiscovery searches, and Unified Messaging data. To avoid more issues, we recommend to move the mailboxes. And here is a reference about how to
move arbitration mailboxes:
http://social.technet.microsoft.com/wiki/contents/articles/3912.exchange-2010-how-to-delete-the-first-database-and-move-the-system-mailboxes.aspx
2. If the public folders won’t be used in the new environment, we don’t need to move them.
3. For the issue whether the license can be used twice, we recommend you to contact with Microsoft Customer Service to confirm.
4. By default, when Exchange 2010 is installed, OAB is created in the default internal Web site in Internet Information Services (IIS).
For more information:
http://technet.microsoft.com/en-us/library/aa996917(v=exchg.141).aspx
If you have any question, please feel free to let me know.
Thanks,
Angela Shi

Hello Apple members, my iPad Air fell on the ground and camera stopped working, please how can you help me out, this is because the camera is so important especially when I am out for events, thanks

My iPad fell and the back camera stopped working, please help me out, thanks,

If it doesn't come back after you restore the iPad, it sounds like you've damaged the hardware, you'll need to take it to Apple or an authorized service center.
Matt

The Safari and Camera apps are missing from my iPhone.

I had a problem with restoring my purchased apps on my iPhone. With help I was able to get them restored. However, now the original apps are missing - camera and safari. It's possible there are more, but I can't remember all those that were original with the phone.

I would check your other apps folders and see if it was misplaced in there. IF you still can't find it, then go to settings - general - reset - reset home screen layout.

When I connect my iphone 3gs to my desktop it is not charging and showing nothing. The computer is not giving any signal that I've connected my iphone to it. Please help me out how to fix it. I did the scanner and camera wizard but its of no use.

Please help me out and give me best solution to this weird problem

bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

My Mac Keyboard Won't Work Properly Like Some Keys Will Do Other Functions Like B Would Turn the Sound Up And Some Won't Work Atall It was Fine Then I left the Room And Came Back And It Starting Doing What I Said it was Doing? Please Help!

The Keyboard on my IMac Dosn't Seem To be Working Properly Most of Them Are Doing The Wrong Functions And Some Are Completly Dead Only A Few Work Please Help!

DanielH123,
I'd recommend doing a SMC reset. I'd also HIGHLY recommend completing your profile. Without a completed profile it makes it difficult to help you out.
To reset the SMC:
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

With Multiple Gradients Click&Hold on the dot shows mask and freezes movement

In LR CC I noticed that if is used multiple gradients, if I switch gradient by clicking on the grey dot, it activates but then it can't be moved. Instead the mask shows.
I'm use to be able to move the gradient, and if I needed the mask to show I hovered over the dot.
Not being able to click on the dot and move the gradient slows me down. If I need the mask in those fes cases I gladly hover.
Is it a setting that has been changed/reset or something that is now by design?
Looking at a normal workflow this is counterproductive.

After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743

In po amount the dot and cama is exchanged

Similar Messages

Maybe you are looking for