In-Process Inspection material having inspection type 04

Dear Sir/Mam
My question.In-Process Inspection material having inspection type 04.As we accept the inspection lot we put the stock into unrestricted.But when we have to reject we convert that stock into new material or if rework to be carried out,the criteria is stock should be quality,than production people cancel the confirmation and rework is carried out through trigger point.So my concern can we put the stock in block and in background whole production order is cancelled.
Thanks
kunal

Dear Kunal
This is the process i have defined for rework. let me know your feedback
1.Reject the material in QA32 to block stock
2.Reverse faulty material using Tcode MB1A u2013 262 movement type against the production order
3.if you need to scrap highly faulty materials use Tcode MB1A u2013 551 movement type against a cost centre
4.Create a rework order using Tcode Co01 order type (PP03)
5.Enter the Parent production order number in the goods receipt tab in Co01. (inbound delivery)
6.Issue goods against the rework order using MIGO
7.confirm the rework order through co11n
8.Move the material back from block to quality using Tcode MB1B u2013 349 movement type (activate 08 inspection)
9.Inspection lot created
10.Do the posting accordingly
Regards
Gajesh

Similar Messages

Inspection lot for Mvt type 311 between two storage location only

Hello all,
I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
I have activated inspection type 08 but it does not have a restricition on S.Loc.
So please suggest some solution for the same.

Dear Amit
In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
So whenever you want inspection lot to be created use Z11.
You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
Regards
Gajesh

Inspection lot for inspection type 10,11,12

Hi,
My requrement is system should generate inspection lot at the time creation of sales order & before PGI.I assigned
inspection type 10,11,12 in QM view in material master.I have a quality planning with usage -3 & status -4.But when I am creating sales order & doing PGI system is not generating inspection lot.
manoj

Hi
check following QCC0>Qulity inspection>Inspection lot creation>Inspection at shipping>
Assign Inspection Lot Origin to Delivery Type
Assign agaist del type:
10 ; Outbound Delivery
11 :Delivery w/o Ref.
similerly for 12
Also
Assign Inspection Type to Delivery Category -->assign inspection lot origin & Inspection type for del catagory
Regards
Sujit

Goods Receipt generates inspection lot using inspection type 08

Hi,
I have two plants A and B. I have set up my materials with an 08 inspection type plant B. Material transfers from plant A and B generate an inspection lot using inspection type 08 and inspection lot origin 08. This works perfectly.
However if I use a stock transfer between two storage locations within 1 plant, using stock transfer order, inspection lot is generated using inspection type 08 when GR is performed.
Is there a link between 08 inspection type and 101 movement
Regards

Yes ,101 & 08 are associated with each other for stock transfer order that is only when receipt indicator is "X" and mvt indicator is prchase order.
If you do not want this to haapen then
copy mvt type 101 as Z01 & for this mvt type deactivate QM in
QCC3->inspection lot creation->Inspect for goods mvt->Deactivate Quality Inspection for a Movement Type>Z01-->deactivate
Use this mvt type when you are tranferring material from storage location to storage Location.
This will not create any inspection lot.
Edited by: Sujit Gujar on Aug 4, 2011 1:09 PM

Inspection lot for inspection type 08

Hi Eperts,
Please tell me following:
Inspection lot does not create when transfer material from plant to plant.
Created STO PO in plant 1000. Issueing plant is 2000.
MMR maintained in both plant with inspection type 01,08 activated in both plant.
As per me system should create inspection lot after GRN takes place against STO PO in plant 1000.
What could be problem.
Regards,
Raja

Hi Raja,
In your previous posts you referred to performing a 101 movement to try get an inspection lot of type 08, this is incorrect.
For movement type 101 you need to activate inspection type 01 and place a block on the q-info record against the vendor in order to get an inspection lot of type 01.
In your scenario, you are wanting an inspection lot of type 08. This is an internal stock movement and wont work with a 101 movement as this is for incoming stock. You should activate inspection type 08 on the material master and use a movement type such as the 322 to move stock to quality inspection. This will create an automatic inspection lot of type 08 as long as you have set QM not active = ' ' for mvt type 322 under SPRO -> Quality Management -> Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements -> deactivate quality inspection for a movement type.
Regards,
Roderick

Material without inspection setup goes to quality inspection

Hello Gurus
We have material without inspection setup, but the system say the stock type is Quality Inspection.
Then we get problems in the goods receipt. We checked the PO has stock type quality inspection, how can we solve this situation?, please give advice.
Best Regards
Jimmy

Hello,
No changes like you mentioned, the problem is if you create a PO with some materials the system says the stock type is Quality inspection , then at GR we are dealing with problems, but the material do not have flag for inspection and also the PO has the stock type Quality inspection, so if you create a new PO it will go to Quality inspection...

Inspection Lot for inspection type 09_ Vendor field is blank

Hi,
Inspection lot for inspection type 09. I am not getting the vendor name in inspection lot details. Vendor field is blank.
I need this field updated. Please guide me what to do for this.
Thnaks & Regards
Kundan kumar

HI Ashok,
I checked in material batch data( msc3n) vendor details is there.
Please update me more in this regard
Thanks & Regards
Kundan kumar

Quality Inspection for a Movement Type 103 , change batch when doing QA11 .

Hi all,
I activated Quality Inspection for a Movement Type 103 . When do MIGO(GR 103) reference to PO ( include material A, qty 100 PC), it will create insp lot. Material A needs batch management.
1st time use QA11 to post 50 PC to stock, it will create a new batch( or you can select a exist batch ).
2nd time use QA11 to post another 50 PC to stock, it will use the batch 1st time used, and you can't change this batch number .
The question is : how to change batch number at the 2nd time ?
Thanks.

Hi,
Pls. check that how u have configured the new batch number in configuration for goods movement.

Printout of completed inspection material should display specification also

hi all
how to capture the 'limits', specified in characteristics, while tacking a printout of results of inspected material.
with regards

hi all
any option?
regards

Reg: Copying inspection results from inspection( 04) to inspection type (!0

Dear Friends ,
I have configured for Quality certificate.
At the time of delivery , the system will create an inspection lot.
To make delivery we need to carry out RR and UD once again.
Can we copy inspection results of inspection type (04) to inspection type 10 , as we are maintaining the same results of inspection type (04). Also can we sit as background whenever a lot is created with lot origin(10) , automatically it has to copy the results from inspection type 04 .
Thanks in advance.

HI Dear,
As you said , it is for COA.
And the materials are not batch manged.
Is there any possibility of copying the results of 04 inspection lot to inspection type 10 lot , which is created at the time of PGI.
Because untill and unless RR and UD is made sales people will be not able to make the delivery . if there are multiple lots , it takes
time for them to carry out RR and UD.
Thanks for your reply!!!

Material routing inspection characteristics.

Hi everybody,
I just wanted to ask whether don't you somebody know some function or bapi, that allows to change the material routing inspection characteristics listed in CA02.
Thanks a lot.
Jan.

Check it here Re: bdc problem ca02

Manual Inspection Lot for Inspection Lot Origin '04'

Dear SAPians,
We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material for the Specified Origin. I feel that there is some customizing issue. Please suggest.
Thanks

Yes Atul,
The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
The system will ask you for the Order number.
NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
Regards,
Shyamal

In inprocess inspection lets say the production order qty is 20. i would want only 1 no. to be inspected while inprocess inspection is configured. kindly guide. Regards,Mathew

In inprocess inspection lets say the production order qty is 20. i would want only 1 no. out of the 20 to be inspected while inprocess inspection is configured. kindly guide.
Thanks in Advance
Regards,
Mat

Hi Mathew,
Create sampling procedure with fixed sample and give sample size = 1. Assign this sampling procedure for the characteristics of the in-process materials in Routing/Master Recipe etc. For sample size calculation at-least one characteristic should be required characteristic for the Material.
Thanks&Regards,
kumar

Incoming inspection through source inspection

Hello,
I want to do incoming inspection for few raw materials on lot basis (each trucks is one lot). But quality department do the inspection for certain characteristics and truck will allowed inside only if QA dept accepts the lot.
Then gross weight is taken and material is unloaded in yard. Again empty truck wt is taken through weigh bridge. Then Good receipt for that lot is done based on formula GRN qty= GROSS - Tare wt.
So I think option for me for incoming inspection is Source inspection. But quality needs data and Usage decision done to be based on lot wise. Is it possible for me to do source inspection based on lot wise for one open purchase order.
Concluding:- I need incoming inspn before Goods Receipt for each lots I receive. I may have one PO, but my vendor may give 5 trucks on that PO. Each truck I need to maintain as a lot for inspection.
Whats the best way...Assured rewards for best solution

Have you tried using inspection points for this? Each truck can be a new inspection point. But you can't make the UD until the end of the day or the next day which could be a problem. I think you'll have to have the material go right to unrestricted inventory, (turn off post to inspection stock in the inspection type setup for the 01.)
As you do each receipt, the qty of the truck will increment the inspection lot posting qty as well as unrestricted inventory. If an inspection point fails, the tech/mgr. would post that qty in the returns stock line. This would move the qty from unrestricted back to the vendor.
The final UD would be on the qty of all five trucks received for the day minus any that were rejected. You may need to work with the invoicing folks as to how this all impacts the invoice. But I beleive they'll see a shortage of material if any trucks were rejected.
Craig

Sending a material for service outside the plant(Material having Material .

Hi Every One
i want send the material (Having material no.) out of the Plant for Service by creating Purchase order.(this is not a subcontracting Process)
Can any one tell me the process or any alternative Process
regards
manju

hi,
Make new material with material type DIEN....this shd solve your problem....
Since services cannot be stored, a material master record of this material type does not contain inventory data or inventory management data. No fields for gross weight, net weight or unit of weight are included in the basic data for a service, as are for other material types.
Hope it helps...
regards
Priyanka.P

In-Process Inspection material having inspection type 04

Similar Messages

Maybe you are looking for