In production order the cost analysis report  is not displaying correct

Hi,
   when i create production order and do some posting activities i could not see the GR  cost row  details in the cost trend report in the production order.
i could see the goods issue, confirmations and overhead rows segments in it. but i could not see the goods receipt tab in the <b>cost trend report .</b> where the implication lies can u suggest.
regards
madan

Hi,
In t.code oplr (order type dependent parameters) check in the controlling tab if you have given the costing variant as PPP2 for the Actual cost calculation & PPP1 for the planned cost for your order type.
Regards,
SDs

Similar Messages

  • Why the SQL Monitor report do not display?

    Why the SQL Monitor report do not display?
    SQL> set serveroutput on
    SQL> variable my_rept CLOB;
    SQL> BEGIN
      2  :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
      3  END;
      4  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:00.93
    SQL> print :my_rept
    MY_REPT
    SQL Monitoring Report
    SQL>

    You can you hint /*+MONITOR*/, and then use this procedure to display the monitor report:
    SQL> select /*+ monitor */ *from hr.employees where salary>10000;
    SQL> variable my_rept CLOB;
    SQL> BEGIN
      2  :my_rept :=DBMS_SQLTUNE.REPORT_SQL_MONITOR();
      3  END;
      4  /
    PL/SQL procedure successfully completed.
    Elapsed: 00:00:01.21
    SQL> print :my_rept
    MY_REPT
    SQL Monitoring Report
    SQL Text
    select /*+ monitor */ *from hr.employees where salary>10000
    Global Information
    Status              :  DONE (ALL ROWS)
    Instance ID         :  1
    Session ID          :  170
    MY_REPT
    SQL ID              :  4tj5p5m6qrkmp
    SQL Execution ID    :  16777216
    Plan Hash Value     :  1445457117
    Execution Started   :  04/30/2010 10:51:23
    First Refresh Time  :  04/30/2010 10:51:23
    Last Refresh Time   :  04/30/2010 10:51:23
    | Elapsed |  Other   | Fetch | Buffer |
    | Time(s) | Waits(s) | Calls |  Gets  |
    ...

  • Report does not display correctly when exported to adobe

    Post Author: mgisonda
    CA Forum: Crystal Reports
    Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
    Number of Database Fields:   144     Number of On-Demand Formulas:   40     UFLs in use:   None     Page N of M Used:   No     File Format Schema:   10.2.0    I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout    Inherits System.Web.UI.Page   Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load        Dim mNotInSpringDesign As String        Dim mPartType As String        mNotInSpringDesign = Request.QueryString("NotInSpringDesign")        If mNotInSpringDesign = "TRUE" Then            mStockCode = Request.QueryString("StockCode")            lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design."            lblNotInSpringDesign.Visible = True            Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>")        Else            mStockCode = Request.QueryString("StockCode")            Dim pList As ParameterValues = New ParameterValues            Dim paramName, paramValue As String            Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue            Dim Report As ReportDocument= New ReportDocument            Dim expOpts As ExportOptions = New ExportOptions            Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions            Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions            expOpts.ExportFormatType = ExportFormatType.PortableDocFormat            mPartType = Request.QueryString("PartType")            'SELECT THE INSPECTION LAYOUT TYPE TO PRINT            Select Case mPartType                Case Is = "C"                    Report.Load(MapPath("./Reports/CompressionLayout.rpt"))                    'Report.Load(MapPath("./Reports/PCAR.rpt"))                Case Is = "E"                    Report.Load(MapPath("./Reports/ExtensionLayout.rpt"))                Case Is = "T"                    Report.Load(MapPath("./Reports/TorsionLayout.rpt"))                Case Is = "W"                    Report.Load(MapPath("./Reports/WasherLayout.rpt"))                Case Is = "F"                    Report.Load(MapPath("./Reports/FreeFormLayout.rpt"))                Case Else            End Select            pV.Value = mStockCode            pList.Add(pV)            Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList)            Response.ClearContent()            Response.ClearHeaders()            Response.ContentType = "Application/pdf"            Report.ExportToHttpResponse(expOpts, Response, False, "")            Report.Close()        End If    End Sub    Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ  to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike   

    Hi Paul
    You're more likely to get an answer to this if you post in the UNIX forum.
    By the looks of it, you may have a problem with your fonts.

  • How do you update the song/artist information on songs that you have loaded to the cloud.  Some are not displaying correctly on my Iphone.

    I have loaded all my music to the cloud from my hard drive.  When I am viewing the music on my PC from the cloud it wasn't displaying all of the song/artist information correctly.  I took the time to go into each one that wasn't displaying correctly using the "get info" option and I updated them all.  Now they are displaying properly on my PC but not on my Iphone.  I'm sure it was because of the way they were loaded.  My question is how do I update the information for the music that is on the cloud so it will display to my Iphone correctly (and the Ipad I just bought but haven't setup yet?

    Pretty sure I just downloaded the .exe files to the SD card (I have a directory called "drivers" there & ran from Windows, no need to boot from anything else. Didn't even need to use Safe Boot. The files do need an .exe extension IE someimes downloads as _exe. No idea why but would just need to rename if download has the underscore and not the period. The you can run them.
    Was so easy I really did not think about it. One of the Intel Platform drives does say "requires 1.60 update" so that is the one you need. Do the 1.60, reboot, and then the Intel update.
    Key point is the release note on the Intel Platform Installer
    "Release Notes
    1.Please install the  Windows BIOS version 1.60 or higher for Encore WT8-A (PDW09x) before installing this Intel Platform Installer update." note this says "BIOS" and not "USB BIOS" which is a smaller file.

  • Why is the character style for hyperlinks not displaying correctly in design mode/viewing/output?

    I am using RH9 and generating WebHelp, and I needed to globally bump up the font size of just my hyperlinked text. I went into my Style Sheet > Character tab, changed the font size of the various character settings for hyperlinks, and clicked Apply and then OK. Normally, this would change all of my hyperlink text font sizes immediately across all of my topics. However, this time, it made no changes to any existing hyperlinked text, and it only affected new hyperlinks that I subsequently added. For the existing hyperlinks, I can only manually change the font size of the each hyperlink one at a time, but that's crazy (there's 100's in this help).
    I can successfully change other characters styles and paragraph styles. This issue only affects the hyperlink character styles. It also shows up in all RH modes - Design mode, viewing, and in the final output.
    Is this an indication of a corrupted style sheet or some other combination of events that I have yet to discover?

    Hi,
    You probably have inline styling in your project overwriting the font size of your style sheet. How are you changing the font size of the individual hyperlinks?
    There is a workaround for inline styling: Open your CSS in notepad and add !important after the font-size:
    font-size: 4pt !important;
    Note that this is a workaround, not a solution. As a solutions you can remove all the style attributes from your hyperlinks to force them to take the CSS styling again.
    Greet,
    Willam

  • Since upgrading to Firefox 33, The open sans font did not display correctly when specified by a website.

    Some of the vertical lines in the fonts are double width like a mixture of bold and normal font weight. I have hardware accellaration disabled. The problem is not fixed when I change default font settings. The problem is not resolved be resetting zoom to 0.
    Inspect Element identifies the problem happens when the website selects open Sans. If I stop sites selecting fonts and force the defaults I don not get the problem. Therefore the problem is with Firefox 33.1 rendering certain fonts specified by websites.
    My machine is windows vista and Open Sans is not shown in the font list. However this was not a problem with previous versions of Firefox.
    I did need to do a reset of firefox parameters during the upgrade to 33 so maybe ther eis some other parameter which needs changing to help render fonts which are not loaded on the machine?

    Here is a screenshot:

  • Cost Analysis Report - For a range of process orders

    Dear all,
    Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
    Thanks
    Nagarajan

    Dear
    You can use cost analysis report like
    1.S_ALR_87099932 - Variances Between Costing Runs
    2.S_ALR_87099931 - Price vs Cost Estimate
    3.S_ALR_87099932 - Variances Between Costing Runs
    5.KOC4
    Regards
    JH

  • How to read the Variance Analysis report S_ALR_87013139,  Pdt cost by Order

    Hi,
    Could someone tell me how to read the variance analysis report, S_ALR_87013139 - Cumulative for product cost by order. The report has the following fields, Target (Debits),     Actual (Debits),     Scrap,     Var. Without Scrap,     Work in Process(WIP),     Control Costs.
    I am looking to find how the numbers add up.
    Thanks for your help.
    Ram
    Message was edited by:
            Ram R

    Thanks Sridhar,
    When I analyse the report S_ALR_87013139 - Cumulative , for a product for a period (with no scrap), I get the following
    Target (Deb) -   46,855.55
    Act (Deb) - 58,315.87
    Scrap - 0.00
    Var W/O- Scrap -  11,269
    WIP- 0
    Control Cost - 0
    Here Actual - Target is not equal to Variance. What could be the issue?
    Could you please tell me how SAP would update this report  with target & actual costs with respect to open production orders, carried over from previous periods.
    Thanks,
    Ram

  • Pocess order - target quantity in cost analysis report

    hi experts ,
    i am not getting the target quantity in cost analysis report of header material , though i have made the GR of the process order .
    target quantity is showing zero.
    i am getting target quantity of components , sfg used.
    kindly give your inputs.
    reagrds,
    satish

    Dear
    First Check the Validity of the standard cost for the header material, It can be seen in ck13n, Dates tab.
    Target costs are populated when you do the goods receipt. System will search for the released standard cost estimate and then apply that for each material component. If these 2 conditions are passed, then you will get target cost in order.
    Plan cost = Plan qty * std cost estimate
    Target Cost = Actual qty * std cost estimate
    Actual cost = Actual qty * actual costs
    Eg:
    A production order is planned for producing 10 units of a material
    Then plan cost on the order = 10 units * std cost
    Target costs are calculated once production is confirmed.
    Suppose only 9 units were produced out of 10 planned
    Then target cost = 9 units * std. costs
    Regards
    Ganesh M

  • CN41N and S_ALR_87013533 report not showing Production order planned cost

    Hi Experts,
    I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
    1. CN41N repoet does not show individual material cost planned in BOM.
    2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
    Example :
    1. CN41N report :
    Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
    2. S_ALR_87013533
    This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
    Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
    Thanks in advance.
    Ashish

    Hi Ashish,
    I doubt whether Item level reporting  in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
    Please check the following links:
    https://scn.sap.com/thread/1743833
    (In the above thread,focus on  Mr. Mohamed Rafi comment.)
    http://scn.sap.com/thread/3530080
    http://scn.sap.com/thread/1311820
    Order cost plan in report CN41N
    Display of plan cost.,&amp;nbsp;CN41N&amp;nbsp;|&amp;nbsp;ABAP,&amp;nbsp;SAP,&amp;nbsp;benX AG,&amp;nbsp;benXBrain,&amp;…
    Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
    Regards
    Saurabh

  • How to split the particle analysis report in order to extract one particular information(for eg. orientation)??)

    hi .. i need to extract the orientation and centroid information from the particle analysis report (image processing is done in NI Vision and then converted to labview vi) for further processing. However once processing is done in Vision ,after converting to labview vi the particle analysis report comes as 1D array of size 1 and thus am unable to extract one particular information from the report. Plz help!   

    duplicate

  • How to get Cost element for a component in co03 cost analysis report

    Hi,
    I'm using table COSP to find the quantity for a production order component.  However, I need to identify the cost element first to get the unique data.  In CO03 cost analysis report, there is cost element for the component.  Does anyone know how to get it ?
    Thanks.

    CSKA stores the basic info about the cost element
    There is no data in CSKB.
    I'm trying to use different tables to get the cost element.
    AUFK, AFKO, AFPO, RESB, ...but no luck...

  • Activity type origin text doesn't have been showed on Cost analysis report

    I have defined three acitivities TMAQ, TMO, CIF. But  the origin text column of these acitivities is not showing in cost Analysis report(althoug the origin is showed), i.e. when we go to an order & navigate to "Cost Analysis".  TCODE:CO02 (Production order)
    Anyone knows how to show the origin text ?
    Thanks a lot for your comments.
    Vero

    Hi Veronica
    I think maybe it´s missing the description in language you are running the report.
    Check transaction KL03 to see if the activity type has the description in the language you are logged.
    If not go to KL02 and update the description and try to run it again.
    Regards
    Fred

  • Production order variance cost

    Hi,
    I know that Plan Cost is caculated based on value and
    seconds which is maintained in KP26 transaction. Workcenter
    attached to Routing.
    I want to know that how actual cost or calculated ?
    In the prodcution order CO03> Cost > Analyses, Plan
    cost is 30 and actual cost is 70 and variance updated as 40.
    The reason i heard that for higher actual cost captured in
    production, while doing confirmation they booked more time.
    But i have seen transaction co15, there is no such field in
    that.
    Could anybody explain where i can see how much time
    booked for that operation in production order ?
    Regards,
    RRS.

    Hi,
    Also check with COOIS report.
    List = confirmation
    Profile = Std profile
    Inside the report select the Field like "Activity to confirm", "unit /activity"
    This will give u operation wise , Confirmed actual activity value for Order
    Pradeep

  • Query to mimic the items tab of the Sales Analysis report.

    Hi there,
    I'm currently looking to create a query that mimics the behaviour of the Sales Analysis report in B1. The items tab of the Sales Analysis report provides all the data I require - the only issue is that I would like to merge this data with some other data regarding current on hand stock quantities etc. and therefore I would like to be able to pull out the query behind the Sales Analysis report.
    I'm assuming this cannot be done and therefore I'm attempting to build a query to replicate the results. The query needs to show Item No, Item Description, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for items within a given period.
    If this can be done relatively easily, can the query then be modified to show all items (including items that haven't sold in the date range) merely with '0' for Quantity Sold, Sales Amt etc. if the item hasn't been sold in the period, and the appropriate figures if each of these columns if the item has sold. I assume some kind of CASE statement can be used to generate this.
    So the query needs to show Item No, Item Description, Current quantity in stock, Quantity Sold, Sales Amt (in system currency), Gross Profit and Gross Profit % for all items within a given date range.
    I hope you can assist me with this problem.
    Thanks
    Grant.

    Hi,
    Thanks Gordon that was exactly what I needed.
    I've been trying to add some additional columns to the query but I'm experiencing some errors and I can't quite tell why.
    Basically, here's the code from another working query I have which I wish to merge into the query you've suggested above:
    SELECT T0.[ItemCode],
    T0.[ItemName],
    T3.[ItmsGrpNam],
    T4.[Name] AS [Sub-Category],
    T5.[Name] AS [Sub-Sub-Category],
    T0.[CardCode] AS [Pref Supplier],
    T6.[FirmName] AS [Brand],
    T0.[U_Range],
    T0.[OnHand],
    CASE WHEN T0.[StockValue] = 0 THEN 0 ELSE T0.[StockValue] END AS [StockValue],
    T1.[Price] AS [PBK GBP Price],
    CASE WHEN T0.[OnHand] = 0 THEN T0.[LastPurPrc] ELSE T0.[StockValue]/T0.[OnHand] END AS [Ave Cost],
    CASE WHEN T0.[OnHand] = 0 THEN T1.[Price]-T0.[LastPurPrc] ELSE CASE WHEN T0.[OnHand] > 0 THEN T1.[Price]-T0.[StockValue]/T0.[OnHand] END END AS [Margin],
    CASE WHEN T0.[OnHand] = 0 AND T0.[LastPurPrc] = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] > 0 AND (T0.[StockValue]/T0.[OnHand]) = 0 THEN 0 ELSE CASE WHEN T0.[OnHand] = 0 THEN (T1.[Price]-T0.[LastPurPrc])/T1.[Price]*100 ELSE CASE WHEN T0.[OnHand] > 0 THEN (T1.[Price]-T0.[StockValue]/T0.[OnHand])/T1.[Price]*100 END END END END AS [Margin %],
    T0.[LastPurPrc]
    FROM [dbo].[OITM]  T0 INNER JOIN [dbo].[ITM1]  T1 ON T0.ItemCode = T1.ItemCode INNER JOIN [dbo].[OITB]  T3 ON T0.ItmsGrpCod = T3.ItmsGrpCod LEFT OUTER JOIN [dbo].[@U_SUBCATEGORY]  T4 ON T0.U_Subcategory = T4.Code LEFT OUTER JOIN [dbo].[@U_SUBSUBCATEGORY]  T5 ON T0.U_SubSubCategory = T5.Code INNER JOIN OMRC T6 ON T0.FirmCode = T6.FirmCode
    WHERE T0.[OnHand] >= 0 and T0.U_Range not in ('E','X')  
    ORDER BY T0.[ItemCode]
    Essentially I just wish to add the fields which are specified in the query above, but not in the query you've already suggested:
    SELECT T0.ItemCode,
    Max(T0.ItemName),
    Max(IsNull(T0.OnHand,0)) 'In Stock',
    SUM(IsNull(T1.Quantity,0)) 'Quantity',
    Sum(IsNull(T1.LineTotal,0)) 'Sales Amt',
    SUM(IsNull(T1.GrssProfit,0)) 'Gross Profit',
    Case WHEN Sum(Isnull(T1.LineTotal,0)) = 0 THEN 0 ELSE
    SUM(IsNUll(T1.GrssProfit,0))/Sum(Isnull(T1.LineTotal,0)) * 100 END 'Gross Profit %'
    FROM dbo.OITM T0
    LEFT JOIN dbo.INV1 T1 ON T1.ItemCode=T0.ItemCode
    LEFT JOIN dbo.OINV T2 ON T2.DocEntry=T1.DocEntry AND T2.DocDate Between [%0] AND [%1]
    GROUP BY T0.ItemCode
    I was hoping it would be fairly straight forward but so far I've had limited success.
    What am I missing here?
    Thanks in advance!

Maybe you are looking for

  • Previous versions of Adobe Acrobat

    My system crashed recenly and had to be rebuilt. I can't find the media for Adobe Acrobat 9 Standard, but I have my serial number. Is there a download available?

  • Reports serialising when column sort attributes used

    If an Apex user has two sessions and runs the same report page in both, then if the report uses column sort attributes (rather than an ORDER BY in the SQL), the second is blocked by the first; once the first completes the second then runs and complet

  • Process m001 died, see its trace file

    Hi Kindly tell why process died & look at the trace file Process m001 died, see its trace file Thu Dec 28 14:30:53 2006 ksvcreate: Process(m001) creation failed ORACLE V10.2.0.1.0 - Production vsnsta=0 vsnsql=14 vsnxtr=3 Oracle Database 10g Enterpris

  • No Skipping in Input monitoring At Playback

    I was wondering if there were any way to keep the signal from an input-monitoring track from skipping when you start playback to hear another piece of data. For instance, I keep one audio track on input-monitor in order to process the signal from Abl

  • Need Driver for external Monitor for Macbook Pro

    Does anyone know where I can get a driver to utilize the output from my macbook pro to an external monitor?  It works great for my iOS but Windows 7 doesn't recognize any external monitor.