In R12 report ending with following error

Hi,
All of the standard reports are completing with the following error on R12.
Rep 1804:unable to open printer definition file.
rep 0069:Internal error
with regards,
Surya

Hi,
Did you set up any printer on the node where CM is installed? You need to have at least one printer defined, and remember to bounce the CM after adding the new printer.
Note: 221737.1 - REP-1804: Unable To Open Printer Definition File
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=221737.1
Note: 123140.1 - How to Setup Printer for Oracle Applications 10.7 - 11.5.x Quick Reference
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=123140.1
Regards,
Hussein

Similar Messages

  • Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

    The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares. 
    When the Volume Shadow Copy service was running under the context of System, this was the error logged:
    “failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
    Which is likely due to not having permissions to write to the network location. 
     This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
      Then the error changed to this:
    “failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
    HRESULT 0x8078006b
    DetailedHRESULT 0x8004230f
    ErrorMessage %%2155348075
    BackupState 12
    VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
    BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
    TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
    DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
    FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
    /></VolumeInfo>
    We aren’t really seeing anything that gives any hint on what the issue is. 
    Any ideas?  Thanks in advance!

    We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free. 
    We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there). 
      If we try another network location, we receive the exact same error. 
     This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
    Thank you for the link. 
    Looking in: 
    Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
    But it doesn’t seem to give any more details: 
    Log Name:     
    Microsoft-Windows-Backup
    Source:       
    Microsoft-Windows-Backup
    Date:         
    7/8/2013 8:00:12 PM
    Event ID:     
    5
    Task Category: None
    Level:        
    Error
    Keywords:     
    User:         
    SYSTEM
    Computer:     
    servername.edu
    Description:
    The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
    Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>5</EventID>
    <Version>3</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
    <EventRecordID>30</EventRecordID>
    <Correlation />
    <Execution ProcessID="3028" ThreadID="3996" />
    <Channel>Microsoft-Windows-Backup</Channel>
    <Computer>servername.edu</Computer>
    <Security UserID="S-1-5-18" />
      </System>
      <EventData>
    <Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
    <Data Name="HRESULT">0x8078006b</Data>
    <Data Name="DetailedHRESULT">0x8004230f</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
    <Data Name="BackupState">12</Data>
    <Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
    <Data Name="BackupTarget">\\servername\BACKUP</Data>
    <Data Name="NumOfVolumes">2</Data>
    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
    IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;VolumeInfoItem
    Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
    NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>
    <Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
    <Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupPreviousState">2</Data>
    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>
    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>
    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="VssFullBackup">false</Data>
    <Data Name="UserInputBMR">false</Data>
    <Data Name="UserInputSSB">false</Data>
    <Data Name="BackupSuccessLogPath">
    </Data>
    <Data Name="BackupFailureLogPath">
    </Data>
    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupFlags">0x9</Data>
    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>
      </EventData>
    </Event>

  • WIB: Eliminate the option to save after a function was ended with an error

    Hi Xperts,
    is there any possibility in the Web Interface Builder to eliminate the option to save after a function was ended with an error-message?
    Appreciate any help.

    The Firefox 4+ versions automatically save your session when you close Firefox. If you want to restore your previous session the next time you open Firefox, use the Restore Previous Session button on the default about:home homepage or in the History menu.

  • Since up grading to new OS Lion  my iPhone iPod and iPad  all give me sync issues  they load apps , music , books , movies , but refuse photos  and the sync ends with an error 50 message most times  , yes  I have re booted  reinstalled new i Tunes  help !

    Since up grading to the  new OS Lion  basicly problem free except  my iPhone iPod and iPad  all give me sync issues  they load apps , music , books , movies , but refuse photos  and the sync ends with an error 50 message most times  , yes  I have re booted  reinstalled new i Tunes and all my others   help !   I have update every thing I can  re installed  , no other issues apart from Parallels  and windows  which  I have deleted and will reisnstall and up date when I get my discs back moving house so in storage boxes somewhere ? , but who needs  Windows ?  is any one else suffering , or have any solutions 

    Hi Ken,
    Wow, I've logged into adobe and never seen your response until now.
    I need to make the forums more of a daily stop I guess.
    Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared  
    Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
    I have of course rebooted,
    Gone into taskmanager, killed all the relevant threads,  tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
    On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
    Is there a way we can use it more of a "ftp" sort of thing, when I want to I can  put files there?  There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting.  Just an fyi. for what it's worth.
    Please, feel free to contact me,
    I'm on g+ chat [email protected]

  • TS3694 My ipod 2nd gen has a white screen and when I try to do a restore through itunes it ends with an error 46. Anyone help?

    My ipod 2nd gen has a white screen and when I try to do a restore through itunes it ends with an error 46. Anyone help?

    https://discussions.apple.com/message/22808372#22808372
    https://discussions.apple.com/message/16155867#16155867
    Also Google for:
    iTunes error 46
    To find others

  • XML Reports end with WARNING Status, Using Virtual Hostname by Veritas HA

    Dear Experts,
    We have upgraded our Application from 11.5.10.2 to R12, 12.1.3. Now in the Upgraded Application we are unable to open/view any of the XML based Concurrent Reports. All the XML Concurrent Reports are ending in Status WARNING.
    When we click on the View Out put, we are just getting the XML code and not the XML based reports.
    The log file of Out Put Postprocessor shows the following errors:
    ================================================
    5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] Get Output Type
    [5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] XML file name: /mnt/oracle/ERPROD/inst/apps/ERPROD_erp-lh-dr/logs/appl/conc/out/o4152834.out
    [5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] XML file is on node: ERP-LH-DR
    [5/28/13 12:40:20 PM] [UNEXPECTED] [960882:RT4152834] java.sql.SQLException: Exhausted Resultset
    at oracle.jdbc.driver.OracleResultSetImpl.getString(OracleResultSetImpl.java:1224)
    at oracle.apps.fnd.cp.util.CpUtil.getCanonicalLocalNode(CpUtil.java:127)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
    [5/28/13 12:40:20 PM] [960882:RT4152834] Completed post-processing actions for request 4152834.
    And error like below:
    The error we are getting from the Application log files are related to Hostname. Following is the abstract from the Output Post Processor log.
    [5/29/13 2:56:02 PM] [UNEXPECTED] [960900:RT4155505] java.sql.SQLException: Exhausted Resultset
    at oracle.jdbc.driver.OracleResultSetImpl.getString(OracleResultSetImpl.java:1224)
    at oracle.apps.fnd.cp.util.CpUtil.getCanonicalLocalNode(CpUtil.java:127)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
    ===============================================================
    Concurrent Manger Log files shows the following error:
    ===========================================================
    Executing request completion options...
    Output file size:
    430455
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 4158856 on node ERP-LH-DR at 30-MAY-2013 18:53:38.
    Post-processing of request 4158856 failed at 30-MAY-2013 18:53:38 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    ------------- 2) PRINT   -------------
    Not printing the output of this request because post-processing failed.
    Finished executing request completion options.
    Concurrent request completed
    ==========================================================
    **Please suggests:**
    **1- Is there any way to make these XML reports work with Veritas HA, using Virtual hostname**
    **2- Can we identify or pin point from where the Out Put Postprocessor is setting the Physical Hostname.**
    Regards
    Ali Ammar

    Hi,
    The metalink note Output Post Processor Fails Due to java.sql.SQLException: Exhausted Resultset [ID 740529.1], is not related to us, we have already verified that. In our case the Application is running on Virtual Hostname and this virtual hostname is taken care by Veritas Library, ACC.
    Secondly the FND_NODES also shows the Virtual hostname as the application is configured on Virtual Hostname. So in our case its not seems to be comming from the FND_NODES tables, rather it seems that some of the Java files/class is picking it by the OS command uname -a.
    So if we can find that class or environment file of java, we can export the Virtual Hostname as we used it in configuration. Please note that the Concurrent Manager and Application listener are also working fine on the Virtual Hostname, by using the Veritas library.
    Solaris:
    LD_PRELOAD_32=/usr/lib/secure/libvuname.so
    VHOSTNAME=<virtual hostname>
    Please suggest.
    Best Regards
    Ali Ammar.

  • Oracle Apps.XML reports ending with warning when the report output contains

    Hi I have XML reports. When we run these reports as concurrent program through Oracle Apps. window and if the report output contains special characters(like Chineese data) in between of English, then the concurrent program is ending with warning. If we remove special characters then it is working fine or when we run the report query directly from backend it is working fine.
    We are importing this data from legacy system into oracle apps. and we can't control these characters or decode them with some other charactes.
    Can any one guide me how to get the XML report output with special characters.
    Thanks in advance.
    Chandra Babu Lankipalli.

    Hi Hussein,
    The concurrent program is ending with Warning. It is unable to publish output file.
    For the same when we remove special characters and run the program it is completing and generating the
    output. The log fine is as follows when the data file contains special characters.
    Custom Application: Version : UNKNOWN
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    XXFA_AR_WIN_EXCEPTION module: XXFA AR Wintrack Customer Interface Exception Report
    Current system time is 23-MAR-2009 05:33:19
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_CUST_ERRORED='3'
    P_CUST_SUCCESS='0'
    P_CUST_TOTAL='3'
    P_REQUEST_ID='4661283'
    P_USER_NAME='SYSADMIN'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    /d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.UTF8
    Report Builder: Release 6.0.8.25.0 - Production on Mon Mar 23 05:33:19 2009
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 4661284 on node FAHQSNA01SFTD03 at 23-MAR-2009 05:33:20.
    Post-processing of request 4661284 failed at 23-MAR-2009 05:33:21 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    ------------- 2) PRINT   -------------
    Not printing the output of this request because post-processing failed.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 23-MAR-2009 05:33:21
    Thanks in advance.
    Chandra

  • Running a Disciverer report gives the following error ORA-20001

    While running one of the discoverer reports under a certain responsibility i got the following error
    ORA-20001: Oracle error -20001: ORA-20001: Error occurred during product initialization for MO when executing 'begin MO_GLOBAL.INIT; end;'. SQLCODE = -20001 SQLERROR = ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, fnd.plsql.MO_GLOBAL.INIT, N, ERRNO, -20001, N, REASON, ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, fnd.plsql.MO_GLOBAL.SET_ORG_ACCESS, N, ERRNO, -20001, N, REASON, ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, fnd.plsql.MO_GLOBAL.SET_ORG_ACCESS_INTERNAL, N, ERRNO, -25153, N, REASON, ORA-25153: Temporary Tables Location: http://batcrmt2.btc.com.bh:8075/discoverer4i/viewer?Connect=[APPS_SECURE]batcrm1_ebst&SessionCookieName=batcrm1_ebst&eul=EUL4_US&opendbid=PDC_LISTING_BY_CHEQUE_NUMBER&FrameDisplayStyle=separate&acf=222206780&NLS_LANG=AMERICAN_AMERICA&NLS_DATE_FORMAT=DD-MON-RRRR&NLS_NUMERIC_CHARACTERS=.%2C&NLS_DATE_LANGUAGE=AMERICAN&NLS_SORT=BINARY
    running reports under different responsibilities does give any errors ,
    Any suggestions why ?

    ORA-20001 isn't an Oracle error message it was coded into your application by a developer: Look it up.
    Consider too the following:
    EXCEPTION
       WHEN NO_DATA_FOUND THEN NULL;so if the employee identifier is not found ... is this really what you want? If an employee isn't valid shouldn't you know it?

  • Large XML Publisher reports fail with client-error-request-value-too-long

    We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2 (ATG.H RUP 5), and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
    The exact error message is as follows:
    lp: unable to print file: client-error-request-value-too-long
    Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
    Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
    Pasta: Error: Preprocess or Print command failed!!!
    APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
    Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
    Action: Review your concurrent request log file for more detailed information.
    I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
    Has anyone had this issue with BI Publisher on Linux?

    Thanks for the link. It looks like the sysadmins have throttled cups to low to allow large bitmapped print jobs:
    grep MaxRequestSize cupsd.conf
    # MaxRequestSize: controls the maximum size of HTTP requests and print files.
    MaxRequestSize 10M
    I am trying to get a more reasonable size limit.

  • Large BI Publisher reports fail with client-error-request-value-too-long

    We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
    The exact error message is as follows:
    lp: unable to print file: client-error-request-value-too-long
    Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
    Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
    Pasta: Error: Preprocess or Print command failed!!!
    APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
    Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
    Action: Review your concurrent request log file for more detailed information.
    I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
    Has anyone had this issue with BI Publisher on Linux?

    The linux sysadmins set the cups max_request_size at 10 MB, which was causing this error. Once the restriction was lifted, the reports ran without error.

  • Post-processing ends with the error message

    Hi
    when i try to run a report, i am getting the below error.
    Beginning post-processing of request 5947956 on node RWS60160REMS at 15-MAR-2012 04:13:48.
    Post-processing of request 5947956 failed at 15-MAR-2012 04:13:51 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    i check the OPP and the error stack is:
    [3/15/12 4:13:51 AM] [2103265:RT5947956] Output file was found but is zero sized - Deleted
    [3/15/12 4:13:51 AM] [UNEXPECTED] [2103265:RT5947956] java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:677)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:425)
         at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:244)
         at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:6032)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
         at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
         at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
         at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
    Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
         at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
    The error is : Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
    I checked my XSL template and corrected that line.
    even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
    I updated the template many times but it keeps picking a wrong template.
    Need help on this issue.
    Thanks

    Please post the details of the application release, database version and OS.
    I checked my XSL template and corrected that line.
    even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
    I updated the template many times but it keeps picking a wrong template.Please create a new template and check then. Also, bounce the OPP.
    Thanks,
    Hussein

  • Could RDF report end with warning status conditionally?

    Could I make the Oracle report concurrent program complete with warning status based on a condition?
    I know it is possible with PL/SQL concurrent requests, but with Oracle Reports how could I end the report with a status as warning indicating users to look into the log file.
    Thank you,
    Vinodh

    Hi DC,
    Thank you for quick feedback. But the report is not completing with warning status (still it completes as Normal). I want the concurrent program to end with warning status. So, by looking at the end status of the concurrent program the user would check the log by clicking the view log button.

  • Win2008 R2 Backup Failure: Volume Shadow copy operation failed for backup volumes with following error code "2155348254"

    Failed to get exclusive lock on the Extensible Firmware Interface (EFI) system partition.
      [ Name]  Microsoft-Windows-Backup
       [ Guid]  {1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}
       EventID 517
       Version 0
       Level 2
       Task 0
       Opcode 0
       Keywords 0x8000000000000000
      - TimeCreated
       [ SystemTime]  2012-09-13T02:01:26.193377500Z
       EventRecordID 134130
       Correlation
      - Execution
       [ ProcessID]  13508
       [ ThreadID]  552
       Channel Application
       Computer SERVER.srv.local
      - Security
       [ UserID]  S-1-5-17
    - EventData
      BackupTime 2012-09-13T02:00:15.711673900Z
      ErrorCode 2155348254
      ErrorMessage %%2155348254

    Shaon,
    I am receiving an identical error message as the original poster.
    Let me give you some information on my setup and what I have already tried.
    I am running a Windows Server 2008 R2 domain controller with SP1 installed.  The system also runs MS SQL 2008 and IIS.  All critical and recommended updates are installed.
    The server backs up to a set of one of two external hard drives over USB 2.0 every night using Windows Backup.  The external hard drives are encrypted using BitLocker and rotated offsite every week.  We had no problems until 27 November 2013.  On
    that date I installed the November Windows updates and rebooted.  Backups have not worked correctly since that time.
    The server has two hard drives.  The first one contains an 100 MB EFI partition (created for the IBM System x3200 M3 server EFI hardware although it appears to be entirely empty).  The second partition contains the OS and the SQL databases.  The
    second hard drive contains shared data files.  None of the partitions are close to being full.
    The backup fails with the following error in the Windows Backup interface:
    EFI System Partition: Windows Server Backup failed to get an exclusive lock on the EFI system partition.  Detailed error: Access is denied.
    The event viewer contains the error listed by the original poster (in the detailed view).  The general view has this description:
    The backup operation that started at <time> has failed with the following error code '2155348254' (Windows Backup failed to get an exclusive lock on the EFI system partition (ESP).  This may happen if another application is using files on the
    ESP.  Please retry the operation.).  Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    This error is thrown about 1 minute after the backup begins.  After encountering the error with the EFI partition the backup exits and does not attempt to backup the other partitions.
    The most interesting detail about the problem is that if I reboot the server and immediately perform a backup it completes successfully.  If I reboot the server and wait approximately an hour before starting the backup it will fail.  The backups
    will continue to fail until the server is rebooted, at which point I if a backup is started immediately it will succeed but all future backups will fail.  Therefore, it seems that Windows Backup has access to the EFI partition immediately after a reboot
    but loses access for some reason close to the hour mark (this is an estimate based on a little experimentation but not an exact number).
    Reading the little bit of information available online for this error message I have tried disabling our antivirus (Kaspersky) with no effect.  I have also replaced the first hard drive in the server that contains the EFI partition with not effect (the
    old hard drive imaged to the new hard drive with no errors, but backups still fail with the new hard drive).  Backups fail with either external hard drive connected, so it is unlikely that the external hard drive is the problem.  I have erased all
    the Windows Backup settings including wiping all data on the external backup drive and created a new backup with no effect.  I attempted to not backing up the EFI partition but it is required for the system state.  I have reviewed all the Windows
    updates installed in 27 November 2013 but none of the KB articles reference anything that I could possibly see related to the backup except for possibly the installation of .NET 4.5.1.  However, I do not believe that Windows Backup uses .NET.  'Vssadmin
    list writers' does not list any obvious errors.
    At this point I am stymied except to think that I have some esoteric hardware failure.  I have contacted IBM support who ran an extensive hardware diagnostic which showed no hardware issues.
    I run several other similar Windows Server 2008 R2 systems, but none of them are on this model of hardware and none of them have an EFI partition.  They all installed the same November Windows Updates.  All of them are able to backup to external
    hard drives without issue.
    Any support you can provide would be greatly appreciated.

  • Create Expense Report ended with error

    Hello Experts,
    We are facing problem in Create Expense Report under Employee Self Service page.
    But when we check this iview directly from Content Administration -> Portal Content -> Content Provided by SAP -> End User Content -> Employe Self Service -> iviews -> Travel & Expense -> Create Expense Report    -->>>>>>>>>>> it works fine.
    As part of ESS/MSS post installation, we have done following activities ->
    1. Created System in Portal pointing to backend.
    2. Created Aliases -> SAP_R3 (set to default), SAP_ECC_TRAVEL and DV1CLNT311 (which is logical name of backend system).
    3. Maintained Portal System -> ITS parameters
    4. Maintained Portal System -> WAS Connection Parameters.
    Connection test for Connector, ITS and WAS is working fine.
    But accessing Create Expense Report from Employee Self Servcie page dumps, here is the error from defaulttrace file ->
    #1.5 #005056BF4C8A007A0000001D000006FC000465017F230EE8#1236957009345#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#ALTOBELLM#19361##n/a##f99954c00fe011de8d8d005056bf4c8a#SAPEngine_Application_Thread[impl:3]_22##0#0#Error#1#/System/Server#Java###Exception ID:03:10_13/03/09_0019_4020550
    [EXCEPTION]
    {0}#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    Component : pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.12.allmytrips/com.sap.pct.erp.ess.12.allmytrips
    Component class : com.sapportals.portal.sapapplication.SAPApplicationIntegratorComponent
    User : ALTOBELLM
         at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;/sap/bc/webdynpro/&lt;WebDynproNamespace&gt;/&lt;WebDynproApplication&gt;/;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;?sap-ep-iviewhandle=007&lt;ESID[HASH]&gt;&amp;sap-wd-configId=&lt;WebDynproConfiguration&gt;&amp;sap-ep-iviewid=&lt;IView.ShortID&gt;&amp;sap-ep-pcdunit=&lt;IView.PCDUnit.ShortID&gt;&amp;sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;sap-accessibility=&lt;User.Accessibility[SAP_BOOL]&gt;&amp;sap-rtl=&lt;LAF.RightToLeft[SAP_BOOL]&gt;&amp;sap-ep-version=&lt;Portal.Version[url_ENCODE]&gt;&amp;sap-wd-tstamp=&lt;$TimeStamp&gt;&amp;&lt;ProducerInfo&gt;&amp;sap-explanation=&lt;User.Explanation[SAP_BOOL]&gt;&amp;&lt;StylesheetIntegration[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;DynamicParameter[PROCESS_RECURSIVE]&gt;&amp;&lt;ForwardParameters[QUERYSTRING]&gt;&amp;&lt;ApplicationParameter[PROCESS_RECURSIVE]&gt;&\#39;; the problem occured at position 310. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;\#39;SAP_LocalSystem&amp;\#39;,
    Attribute: &amp;\#39;client&amp;\#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         ... 29 more
    #1.5 #005056BF4C8A007A0000001F000006FC000465017F231514#1236957009345#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#ALTOBELLM#19361##n/a##f99954c00fe011de8d8d005056bf4c8a#SAPEngine_Application_Thread[impl:3]_22##0#0#Error##Java###03:10_13/03/09_0019_4020550
    [EXCEPTION]
    #1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Unable to parse template &\#39;&lt;System.Access.WAS.protocol&gt;://&lt;System.Access.WAS.hostname&gt;/sap/bc/webdynpro/&lt;WebDynproNamespace&gt;/&lt;WebDynproApplication&gt;/;sap-ext-sid=&lt;ESID[url_ENCODE]&gt;?sap-ep-iviewhandle=007&lt;ESID[HASH]&gt;&amp;sap-wd-configId=&lt;WebDynproConfiguration&gt;&amp;sap-ep-iviewid=&lt;IView.ShortID&gt;&amp;sap-ep-pcdunit=&lt;IView.PCDUnit.ShortID&gt;&amp;sap-client=&lt;System.client&gt;&amp;sap-language=&lt;Request.Language&gt;&amp;sap-accessibility=&lt;User.Accessibility[SAP_BOOL]&gt;&amp;sap-rtl=&lt;LAF.RightToLeft[SAP_BOOL]&gt;&amp;sap-ep-version=&lt;Portal.Version[url_ENCODE]&gt;&amp;sap-wd-tstamp=&lt;$TimeStamp&gt;&amp;&lt;ProducerInfo&gt;&amp;sap-explanation=&lt;User.Explanation[SAP_BOOL]&gt;&amp;&lt;StylesheetIntegration[IF_true PROCESS_RECURSIVE]&gt;&amp;&lt;Authentication&gt;&amp;&lt;DynamicParameter[PROCESS_RECURSIVE]&gt;&amp;&lt;ForwardParameters[QUERYSTRING]&gt;&amp;&lt;ApplicationParameter[PROCESS_RECURSIVE]&gt;&\#39;; the problem occured at position 310. Cannot process expression &lt;System.client&gt; because Invalid System Attribute:
    System:    &amp;\#39;SAP_LocalSystem&amp;\#39;,
    Attribute: &amp;\#39;client&amp;\#39;.
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass(AbstractIntegratorComponent.java:123)
         at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    Looking forward to get ideas on how to resolve this issue.
    Thanks
    Davinderpal Singh

    Hello Sriram,
    Thanks for your time.
    When i have checked PA0105 table for user ALTOBELLM, i am able to see following entry maintained for the user.
                                                                                    MANDT PERNR      SUBTY OBJPS SPRPS ENDDA      BEGDA      SEQNR AEDTM      UNAME        HISTO ITXEX REFEX ORDEX ITBLD PREAS FLAG1 FLAG2 FLAG3 FLAG4 RESE1 RESE2 GRPVL USRTY  USRID                         
    311   02000267   0001              31.12.9999 01.01.2009 000   02.03.2009 ALTOBELLM                                                                                0001   ALTOBELLM                     
    Please let me know how can i check whether Travel Privelages IT0017 is maintained for this employee in the date range.
    Thanks
    Davinderpal Singh

  • Report end with errors

    Hi i have built a report using oracle report builder.
    And i have create its executable and concurrent program in apps.....
    But when i run my request, the request completed with errors .
    Can anyone help me please.
    My log is as follows
    Warehouse Management: Version : 11.5.0 - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    DJO2 module: DJO Report
    Current system time is 12-DEC-2007 12:22:42
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    /oracle/apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to: /oracle/apps/visora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    _AMERICA.UTF8
    Spawned Process 31505
    Xlib: connection to "ebiz:0.0" refused by server
    Xlib: Invalid MIT-MAGIC-COOKIE-1 key
    Xlib: connection to "ebiz:0.0" refused by server
    Xlib: Invalid MIT-MAGIC-COOKIE-1 key
    REP-3000: Internal error starting Oracle Toolkit.
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.25.0 - Production on Wed Dec 12 12:22:47 2007
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2799899.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 12-DEC-2007 12:22:47
    ---------------------------------------------------------------------------

    If you want to run bitmap reports (PDF/Postscript etc) you must have X server of some description... If you are on later version of apps is is mandatory.
    Does you server have a monitor, if so native X server will be running, if not you'll need to run an X server (xvfb or vncserver) somewhere - you could run XMing (or Reflection) on your client set DISPLAY to your_client:0.0 and connect to that but not for anything other than development.
    Gareth

Maybe you are looking for