In RWB(XI)
hi
sdn's
i am getting this error can any one suggest,what might be wrong
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
thanks
kalyan
Hi,
Refer this...
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/frameset.htm
However, a fix for how to trace the exact Error is found here:
http://help.sap.com/saphelp_nw04s/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/d4fa40ee14f26fe10000000a1550b0/frameset.htm
vasanth
Similar Messages
-
NW PI 7.3 SP4 AdapterEngine and RWB do not work
Hi experts,
i am currently setting up a new NW 7.3 PI Landscape.
I have setup the Landscape by now successfully and implemented SP4.
After a succesfull run of the PI ConfigWizard there seems to be a problem of registering the adapter engine and runtime workbench to the sld.
I am using a local sld installed on the pi itself.
When i start the rwb i get the following error:
com.sap.aii.utilxi.sld.XISldException: Invalid Parameter: password = null or empty
In the LogViewer i see the following error messages:
Creating CIM client failed. Parameter password is empty
The user SLD_DS_<SID> also gets regularly locked.
I have triple checked all settings in the ExchangeProfile / JCO RFC Dest und HTTP Destinations
So it seems there are at some point credentials missing.
But i'm not able to find it. I have also opened a case at sap support but till now no response.
Maybe some of you had a similiar problem and can give me an advice.
Any advice is highly appreciated.Hi Thomas
Try out the below;
Please check if service property 'com.sap.aii.ibrep.core.usage_type' of
J2EE primary-service "com.sap.aii.utilxi.cfg.svc" was by mistake
set to "CE" by the WebAS Initial Setup CTC Wizard.
Start NetWeaver Administrator with http://<host>:<port>/nwa and navigateto 'Configuration > Infrastructure > Java System Properties.'.
Select the 'Service' tab and search for service name "XPI Service: AII
Config Service" (component name 'com.sap.aii.utilxi.cfg.svc').
Change property 'com.sap.aii.ibrep.core.usage_type' back to its default
value 'XPI'. Save and restart the whole Java stack.
You may have to run the PI self registration wizard again to see all components in the SLD
Matt -
Urgent - Messages in RWB in "System Error" status - Resending
All,
I am trying to resend the messages in Message Monitoring of RWB which are in "System Error".
Message selected and Clicked on resend and it would not ask my password.
We are on SP19 of XI 3.0. Is it something new with the SP19?
I am pretty much sure that it used to ask for password earlier. And we dont have SSO (single sign on) enabled.
reg,Naveen,
Have you seen this weblog:
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Also if you give the password once you dont need to give again. So that might be the reason why it is not asking you. Close all your browsers and open once again and give a try.
---Satish -
"waiting" and "system error" status cannot be resent in rwb?
Hi,gurus:
In RWB->MESSAGE MONITORING,I can't resend or cancel the messages with the status " waiting" and "system error".
when I clicked "resend" button,it asked for user and password.After I was authentificated,the system didn't resend a message. Have you ever met this issue?
By the way,I could resend the error messages before.
Thanks in advance.Hi,
I checked the note 1233918,and it talked about the same issue.
But the solution is as follows,which I don't know what to do.(Our PI version is PI7.0 SR3 SP14)
Symptom
When the first message for a managed system is cancelled or resent, after pressing ok in the logon pop-up nothing happens - message is not resent or cancelled. The logon data is correct, since subsequent resend/ cancel works without further logon request. Another symptom is cancelling or resending a wrong message, when using the filter mechanism in the table. E.g. the table displays messages A, B, C, D. If message C is selected and after that the filter is set so that message C is hidden from the filter selection, when selecting message D and trying to resend/cancel it, message C is cancelled/resent (the hidden one, previously selected) and nothing is happening with message D.
Other terms
NWA, PI, Message monitoring, resend, cancel
Reason and Prerequisites
The UI Proxy connection was not obtained properly. Another reason - TableAccessories was not invalidating the nodes properly. Also after filtering the result list, resend/cancel was taking wrong message Ids.
Solution
For SP5 install LMNWABASICCOMP05P_1.SCA or higher patch level.
For SP6 install LMNWABASICCOMP06P_1.SCA or higher patch level. -
System Error in Comm channel monitoring of RWB
Dear all,
I have a Proxy to webservice scenario (HCM-PI-SuccessFactors). At receiver side i am using SOAP AXIS adapter. In RWB, the status of the channel is green and running. But when i ping the channel, it shows System Error.
I have made changes in respective communication channels, activated and cleared the cache. Still same error.
Later taken complete restart of system. Still same error.
How to overcome this ?
Note : 1) End to end scenario is working fine
2) Among the three trusted certificates installed, status of one certificate is showing warning (status: which will expire on may 5).
Regards
UdayHi Hareesh,
Thanks for you input. I have used the standard swc SFIHCM01. Here it is mentioned that it is applicable for SWC MESSAGING SYSTEM SERVICE 7.31 as shown below
What does this MESSAGING SYSTEM SERVICE mean exactly. In general is it our PI system.
plz correct me if i am wrong
Regards
Uday -
Hi.
Im having trouble getting internet explorer 7 and the RWB to work together.
Errors popping up are like these:
'ur_txt' is undefined
Object expected
'_htmlbMessageBar' is undefined
Is it possible at all to run RWB with IE7 or do I have to reinstall an older version.
A fix would be prefered
Regards PeterHi Peter,
If you need to get IE7.0 supported on SP lower than 19 (NW04) or 10 (NW04S), use this note: 991449
If an earlier version of Web Dynpro is used, there are two possibilities
to enable IE7 for Web Dynpro. The two possibilities will be discussed in
the following:
o Change configuration of supported clients:
==========================================
Open Visual Administrator. On the relevant server instance,
navigate to "Services -> Configuration Adapter". In the detail
view, a tree becomes visible. Navigate to "webdynpro -> sap.com
-> tcwddispwda -> "Propertysheet clients". Open this
propertysheet in edit mode by pressing the "Edit" button on the
toolbar. Change following two properties in the propertysheet
wizard:
- property "clienttypes":
default value is: "msie6|op6|msie5|ns7|safari|java|win|ecatt"
Page 2
change value to: "op6|msie5|msie6|ns7|safari|java|win|ecatt"
- property "msie6.recognition":
default value is: "MSIE 6."
change value to: "MSIE"
Having done this, close the wizard and press again the "Edit"
button to save the changes. Afterwards, a restart of the engine
is required in order to make these changes effective. The Web
Dynpro runtime should then be able to allow the usage of
Microsoft IE7 as browsers.
Hope this helps, if not upgrade to the supported support packs.
Thanks,
Van Vi -
Error while opening Alert Configuration in RWB
Hi Everyone,
When I selcet Either Alert Inbox or Alert Configuration in Runtime Work Bench, I am getting error as
404 Not Found
The requested resource does not exist.
Do we need to configure/Deploy anything to access Alert Configuration.
Regards,
VarunVarun,
Perform following steps. , if not performed earlier :
1.Go to exchange profile
http://<IP>:<Port>/exchangeProfile/index.html
Then RuntimeWorkbench -> com.sap.aii.rwb.server.centralmonitoring.r3.ashost = " Mention FQDN here "
->com.sap.aii.rwb.server.centralmonitoring..httpport = 8000
2. Reinitialize the RWB service by : http://xiserver:50000/rwb/rtc?op=init
3. RZ10 - Make an entry for /icm/host_name_full
*************************************************8
You should give fully qualified host name for the xi server (parameter, icm/host_name_full). Also set the same in exchange profile parameter com.sap.aii.rwb.server.centralmonitoring.r3.ashost.
- Creating HTTP Destination pmistore in the Java Environment
from XI installation guide (config in visual admin)
- Check if services in transaction SICF for RWB - if they are activated
- on your XI box go to TCODE - SE38 and run program - RSXMB_ACTIVATE_ICF_SERVICES.
- check SAP note: 750287 (XI 3.0 Runtime Workbench: Alert configuration does not start) and change values in your ExchangeProfile.
- check if you can accept cookies.
It should work friend....!!!!
Regards, -
Authorization error while resending message in rwb
Dear all,
our system is runing on SPS16. When a message run into
status 'system error' i select it and do resend. I got
this error:
'Authorization failed for the specified roles.
For details see log entry 02004C4F4F....'
The message run into error because the receiver chanel
was willingly deactivated to simulate an error for
alerting test.
While this error is happining there is a logon field in
the browser where the user is entered and the password
field is empty. When i enter the password, than there
is no authorization problem. But the message has not been
resend.
I look to the detail status an i can not see that the
message has been resend. Normaly the number of retry will
increment when you resend the message but the message
still not go through. Even if i try to resend 5 time,
every time the error raise again and the system show the
field user and password for logon again. When logon again
every thing seem to be fine. But the message is not
resend.
Is this a bug in SPS16? Does somebody face this behaviour?
best regards,
Ly-Na PhuHi Thorsten,
thanks for the hint. I know this oss note already and i
have check it. All the setting is correct according to
this oss note. Nevertheless the problem remain.
My be it has to do with fqdn which i have set but maybe
not in all places. If you don't set the fqdn correct
some function in rwb doesn't work properly. I have set
it in the profile and in exchange profile where i can find
that one have to specify the host name. This is just only
my assumption. I don't know exactly to what my problem
will be related to.
regards,
Ly-Na Phu -
Error while testing in RWB for HTTP Plain adapter to File
Hi All,
My interface is between R/3 using Plain HTTP i am sending messages to PI and my recivers is File system
while testing in RWB , since i am usin HTTP Plain will not create Sender comm channel and Sender aggrement .
While testing in RWB
i am getting this Error.
Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve outbound binding for the given P/S/A values:
thanking you
SridharHi,
use url as http://host:port/sap/xi/adapter_plain?senderservice=?...........
check the wiki section of the PI ..there are HTTP test tools available which can be used for doing this testing...
if you use testing tabs provided by RWB..then it uses different urls...like if it iE then http://host:port/engine?type=entry...
HTH
Rajesh -
Error While Testing the Data from RWB
Hi Gurus,
While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
I am getting the error as explained below:
Error while sending Message -->RWB
No header Mapping Defined -->Trace
Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
Any help on this please
Regards
SreeniHi ,
without completing your configuration how are you testing your interface??
1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
2) then check your interface/operation mapping done perfectly between source and target interfaces.
if you have above steps done perfectly then your interface will work.
if you still getting error search in sdn with error message you will find usefull tips..or post in sdn.
Regards,
Raj -
Error while testing Adapter through RWB with payload
Hi all,
While testing Adapter engine through RWB with payload, i get the below error
Error while sending message: com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=ec6clnt001;TS=com_avaya_java_bs;AN=StartNotification_MI_sync;ANS=http://www.tcs.com/sap/xi/AVAYAPoC;"
Can any body please suggest the possible reason and solution for the same.
Regrads,
KulwantHi
verify the receiver agreement and also check it out whether receiver message interface is configured properly or not?
or
open ID and goto tools tab in that click on
test configuration by providing your Business service and interface details along with the payload it displays the error message.
regards
Suryanarayana -
Error while testing sender SOAP scenario from XMLSpy-but can test from RWB
HI,
I developed one scenario with sender SOAP adapter and Receiver side ABAP proxy.
Now I want to test my scenario.
I tested my scenario successfully from RWB-->Integration server Integration Engine. ( it posted successfully and I can see checked flag in SXMB_MONI)
But when I tried to test the scenario fro XML spy it is throwing HTTP error 500.
When I type my URL in internet explores it is giving Message Servlet is in Status OK.
I am not sure what is the difference between there two type of testing.
What does it mean by successful from RWB and fails from XMLSpy?
Why I am getting this error from XMLSpy?Dear Ashok,
if RWB showing you successful then message in not in error.
XML Spy giving error HTTP 500 not it is just server error.This might be due to large payload.
here is the description of all error related with 500+
5xx Server Error
The server failed to fulfill an apparently valid request.
Response status codes beginning with the digit "5" indicate cases in which the server is aware that it has erred or is incapable of performing the request. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. User agents SHOULD display any included entity to the user. These response codes are applicable to any request method.
500 Internal Server Error
501 Not Implemented
502 Bad Gateway
503 Service Unavailable
504 Gateway Timeout
505 HTTP Version Not Supported
506 Variant Also Negotiates (RFC 2295)
507 Insufficient Storage (WebDAV) (RFC 4918)
509 Bandwidth Limit Exceeded
This status code, while used by many servers, is not an official HTTP status code.
510 Not Extended (RFC 2774)
first ping your server
Tcode for this is SM49>ping
Then in additional parameter put the server IP and execute it will show you its reachability.
if it is not reachable then contact the server vendor,
Else if it is timeout problemthen
you run Tcode SXMB_ADM>intregration engine configuration
put category RUNTIME
then click specific configuration
Then change/increase HTTP timeout
**PS: Reward points if useful**
Regards,
Sumit Gupta -
Hi
When i selected the Configuration in RWB i am getting the following Error
No ports that send to the Integration Server could be found for the following ALE logical systems:<br>DEV500: Function module "SXI_READ_ALEPORTS" not found., error key: RFC_ERROR_SYSTEM_FAILURE
We have a SAP R/3 4.6c system with SAP PI 7.0 ...
When i checked the SXI_READ_ALEREPORTS Function Module in SAP R/3 system its saying the functional module does not exists ...
Any idea on how to resolve it
SVhi,
maintain ports in xi system with naming convention <SAP(system id of R/3 )>EX: SAPSR3,and assign proper RFC destination to it...and in the same way do it in R/3 system
Check note 838560 for "RFC_ERROR_SYSTEM_FAILURE "
and Depending on what database you use check the database logs.
U can check with this RFC_ERROR_SYSTEM_FAILURE link,
http://help.sap.com/saphelp_erp2005/helpdata/en/ca/115e4088dc0272e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k -
Hi
while i am monitoring in RWB under message monitoring
Status System Error
Error Category XI_J2EE_ADAPTER_FILE
Error Code PROCESSING_ERROR
It is in adapter engine
In auditlog i am getting error like this
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: java.text.ParseException: Security violation encountered during variable substitution: Content of variable po is not safe: A.Hoorsun/: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: java.text.ParseException: Security violation encountered during variable substitution: Content of variable po is not safe: A.Hoorsun
How to solve this type of error.
thanks in adavance
raoRao,
Try checking the flag 'Disable Security Checks' in the communication channel.
Regards,
Koen -
File adapter problem - message in RWB HOLDING msg status
Problem in XI File adapter recver comm channel.Getting msg in RWB Adapter Engine HOLDING status.
1. No explaination in RWB Details tab, of why status Holding.
2. File does not get created, because of Holding status.
3. Cannot Resend or Cancel in RWB the message.
<b>Sometimes the msg goes through and other times does not and is stuck.</b>
File Adapter Parms set as:
Connection Mode: Per File Transfer
Transfer Mode: Text
File Adapter setting Max concurrency = 1 would that have anything to do with it?
File Construction Mode:Create
Put Name: Direct
Empty msg-handling: Write Empty File
Type: Text
<b>Any ideas Why holding? and Where to see more details. </b>Hey
exact same issue has been discussed today on SDN.anyways have a look at the following blog
/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Thanx
Aamir -
In XI no adapters are visible RWB and the error "AE_DETAILS_GET_ERROR"
In XI no adapters are visible in the RWB and I get the error "AE_DETAILS_GET_ERROR"<BR>
It happens after a database copy from PRD to QAS.<BR>
I tried restarting the system, and checked the SLD content. Also the cash is refreshed.<BR>
The standard after care actions are carried out, like: SXMB_ADM, SMICM, SE06, STMS, Exchange Profile, SM59, RZ20 and RZ21, SLD content, SLDAPICUST and RZ70.
Thanks in advanceWhen in XI no adapters are visible RWB or you get the error "AE_DETAILS_GET_ERROR" I have several steps for this:
<P>
Check that all adapters are running in the Visual Administrator (under services)
<P>
Make sure the RFC's to the SLD (SAPSLDAPI) and Exchange profile (LCRSAPRFC) are maintaint correct in SM59.<BR>
Check this also with transaction SLDcheck
<P>
Make sure the correct URL is maintaint in SXMB_ADM > Integration Engine configuration<BR>
This should be like : http://hostname:80nr/sap/xi/engine?type=entry
Check the settings with F7.
<P>
Check the users and passwords in the ExchangeProfile.<BR>
<P>
Check the users and passwords in SAP (check for locked users with RSUSR200).<BR>
<P>
Check the users and passwords in the SLD if this is a standalone (check for locked users).<BR>
Try logging on with all XI users in the useradmin of the SLD (http://hostname:5nr00/useradmin)<BR>
Sometimes a new password must be set. You can set it directly to the old password.<BR>
<P>
If there is a problem that not all XI components are shown in the SLD: see note 764176
<P>
If there is a problem between the function module SAI_AE_DETAILS_GET (line 241 adapaterType) and the SLD
<P>
(class browser > tab LD > XI Adapter Service : it shows AdapterType).<BR>
In this case create a repair in the function module by editting it and transport it to the other XI systems.
<P>
Restart XI
<P>
Perform a cache refresh:<BR>
http://hostname:5nr00/CPACache/refresh?mode=full<BR>
use the XIDIRUSER user
<P>
http://hostname:5nr00/rwb/rtc?op=init<BR>
use the XIRWBUSER user
<P>
SAP transaction SXI_CACHE > start complete cache refresh (shift F6)<BR>
<P>
Sometimes a restart of the service SAP XI AF messaging is nessesary.<BR>
You can perform this restart via the Visual Administrator<BR>
<P>
If all does not work: check if the content is up to date.<BR>
Sometimes after a patchlevel upgrade, the XI basis content is forgotten.<BR>
Importing the XI Content for Software Component Version SAP Basis 6.40 SR1:<BR>
Copy XI3_0_SAP_BASIS_6.40_<PATCHNR>_00.tpz to directory <BR>
<P>
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/<BR>
Goto the the XI Repository (Design).<BR>
Choose ? Tools ? Import Design Objects<BR>
Choose the file XI3_0_SAP_BASIS_6.40_<PATCHNR>_00.tpz<BR>
Import the file
<P>
Check if the XI services in SICF are active.<BR>
Activate them with : SE38 > RSXMB_ACTIVATE_ICF_SERVICES<BR>
<P>
Transaction SUPC (mass generation of roles) for all SAP_XI* roles.<BR>
And perform a User comparison in transaction PFCG for all SAP_XI_* rolles<BR>
<P>
User comparision (via SU01 > PISUPER > dubbelclick on each roll)<BR>
<P>
Check the CIM content of the SLD.<BR>
This is very intensive work.<BR>
Check and compare with a correct running XI/PI system the content.<BR>
SLD > Administration > Content Management<BR>
Check and compare all components that have associasions!!!<BR>
<P>
Perform a complete cache refresh via URL:<BR>
http://hostname:5nr00/rep/start/index.jsp<BR>
Administration > Repository > Cache overview<BR>
Administration > Directory > Cache overview<BR>
Administration > Runtime > Cache overview<BR>
<P>
Refer to Note 1031321 "Self-Registration of Adapter Engine and RWB fails"
Best regards,<BR>
Marco
<P>
Maybe you are looking for
-
Can't find connect to network in virtualbox.
I recently installed arch onto virtualbox to test it out. The live install .iso could connect fine, but after installation i couldn't connect. Please help i am new to arch.
-
PC as a bluetooth Device and accept input from other devices
I need to set my PC up as a bluetooth device by use of a bluetooth dongle connected to my PC. I need to have a program running on my PC that will detect other bluetooth devices and connect with them, accept input from them. Please help me do this. an
-
Executing Dynamic actions in Background???
Hello Experts, We have a requirement where we need to automate PA40. The data would be sent in csv file and we need to perform the required steps to insert data into Infotypes. The issue is in batch mode (background mode), the dynamic actions wouldn'
-
How can I download the software for a fujitsu S1300i scanner onto my iMac
How can I download the drivers for a Fujitsu Snapscan S1300i scanner?
-
Why doesn't my video fit on the TV screen?
hey everyone. i hope theres answer to this. so i made a little slideshow/movie with imovie and then sent it over to idvd so that i could make a dvd out of it. with everything set in standard (4:3 or.. is it 3:4) mode, i thought itd come out fine, but