In sales order gross weight and net weight are incorrect.

Hi,
In sales order are for a line item gross wt and net wt are not showing as per order quantity.
I checked in material master, in basic data 1 and additinal data gross wt and net wt are maintained correctly.
So could you please advise me what could be the issue.
Thanks,
Praveen

You need to provide a bit more information on when this is happening like whether the sales order has been created against a contract or the user changed the quantity etc..
For example, when the user creates the sales order against a contract, while copying and changing the quantity this may happen. This is due to, the user directly clicking the save button before hitting enter button. Meaning whenever a user makes changes in item quantity in the sales order, they can hit the enter button so that the system can refersh the related data. Then the user can click on the save button.
We had similar issue when the quantity is copied from quantity contract and we instructed the users to hit enter button to refresh all the related data.
Regards,

Similar Messages

Gross weight and net weight not getting copied from Inquiry to quotation

Hai Gurus
Could anyone tell me why gross weight & net weight for the particular quantity of goods are not getting copied to quotation and order from an inquiry. All other details that I maintain in an inquiry (shipping type, receiving point etc) are getting copied to quotation.
regards
John
Edited by: Gino12 on Nov 11, 2010 12:49 PM

Dear
Did you maintain in MM02-MMR-Sales/Plant view Gross weight and Net wirght ??
System calculates the net weight based on the order quantity for the item and the net weight proposed from the material master record. If the item has more than one schedule line, the system uses the total order quantity of all schedule lines to calculate the net weight. In sales documents where schedule lines are not allowed (contracts, for example), the system calculates the net weight using the target quantity.
Regards
JH

Gross weight and net weight of line item in a delivery

Hi what exactly the meaning of gross weight and netweight of delivery line item?
Where can i see these 2 fields in the transaction?How weight differs to the quantity for a particular delivery item?
Thanks in advane
Mahesh

Hi,
Gross Weight
The system can use the gross weight at a later stage, depending on what kind of capacity check you run, to check storage bin capacity for warehouse management purposes.
The system calculates the gross weight of each item by multiplying the delivery quantity by the gross weight per unit that comes from the sales order. If there is no related sales order, the system uses the gross weight from the material master record. You can change the gross weight manually in the delivery document.
Net weight
The total net weight of all items in the delivery.
Use
The system calculates the net weight of each item by multiplying the delivery quantity by the net weight per unit that comes from the sales order. If there is no related sales order, the system uses the net weight from the material master record.
Please reward if helpful.
Thanks & Regards
Sadhu Kishore

Sales Order Credit Account and Credit control area not updated

Hi,
I have a production issue. I have two sales orders created from Same Value contract, with same PO, same sold to party same payer. Both the orders created by same user at the same time.
First SO has credit control area and credit account is updated but the second order did not update with this information.
For first order, if I go to Environment -> Partner -> Display credit account, system taking to FD33 screen of the credit account.
For the second order, above menu path giving message "Cannot display credit limit as no credit management account is available"
Please let me know how fix the second order to rectify this issue.
Thanks,
Satish

Hi,
Goto OVAK T.Code.
Assign credit check to your second sales order type.
Assign the values from "A" to "D".Any value as per your need.
Save.
Regards,
Krishna.

Required the Gross and Net weight

Hi to All,
Please help me on how to config or reqired the Gross weight and net weight in creation of material master in tcode MM01 (Sales: General/Plant)
Thanks,
Ermin D. Concepcion

Hi,
Please check with the following link you can find the BDC Program to Upload Material Master Data (MM01)
http://sapprograms.blogspot.com/2008/11/bdc-program-to-upload-material-master.html
Thanks,
Neelima.

Updating picked quantity, gross and net-weight in delivery

Hello Experts,
I have created a program from which I am trying to update the picked quantity, gross and net-weights into an outbound delivery. This works in the normal scenario when the base UoM, sales UoM and the gross and net-weight UoMs are the same.
However, when these UoMs are different, I have to carry out a conversion according to the UoM being used for each of the quantities mentioned. In such a scenario, the BAPI returns the following messages: -
Error message: - Error in document 0080005487 item 00010 (quantity consistency check) [Message Class VLBAPI; Message Number 004]
Warning message: -Quantities 0.0000000000000000E00 and 0.0000000000000000E00 cannot be represented by conv. factors 87,658 and 39,761 [Message Class VL; Message Number 266]
The BAPI that I am using is BAPI_OUTB_DELIVERY_CHANGE.
For the parameter ITEM_DATA, these are the values, that I am passing: -
DELIV_NUM: - 80005487
DELIV_ITEM: - 00010
Material: - 30020596
DLV_QTY: - 4
DLV_QTY_IMUNIT: - 8.818
FACT_UNIT_NOM: - 87658
FACT_UNIT_DENOM: - 39761
GROSS_WT: - 1.004
NET_WEIGHT: - 0.004
UNIT_OF_WT: - TO
UNIT_OF_WT_ISO: - TNE
SALES_UNIT: - KG
SALES_UNIT_ISO: - KGM
BASE_UOM: - LB
MATERIAL_EXTERNAL: - 30020596
MATERIAL_GUID: - DD7B9B2F133B61F1B6DF0015C5891481
Please note that the delivery I am trying to update has the following units: -
Base UoM: - Lb
Sales UoM: - Kg
Gross & Nt Weight: - TO
Please let me know if there is any other value in the item_data internal table or any other parameter of this BAPI that needs to be initialized.
Please respond ASAP. I have been struggling with this issue for quite some time.
Regards,
Divyaman Singh Rawat

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=bapi_outb_delivery_change&adv=false&sortby=cm_rnd_rankvalue
Will help you out

Difference between sales order schedule line and item level data

Hi All,
Could you please let me know what is the difference between sales order schedule line and item level data?
Thanks,
Ramya

Hi Ramya,
Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc., ie It contains the full details of sales order data with respect to the scheduled line of delivery. The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
contains the full details of item irrespective of scheduled line.
Regards,
R. Senthil Mareeswaran.

List of rejected sales order with quantity and value

Hi,
Is it possible to get the report from VA05 for the list of rejected items with value and quantity ?
Pls help
Thanks,
Vijesh

Dear Vijesh,
VA05 I believe is a very powerful report for doing analysis at order and line item level. If your rejection criterion includes a rejection reason at line item level, yes this list from VA05 can give rejected Sales Orders with Quantity and Value. See the screen shot below.
I selected a list with open dates till date, I can see Sales Order number, Sales Document Type, Item Number, Material, Rejection reason, Quantity at line item level and net price.
However, I am not sure what is the rejection criterion you use in your business and I am not sure if you use rejection reason and hence I would like to hear from you, if this explanation helps you.
Thanks
Nagaraj

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Hi All, We are in to Release 11.5.10.2.There is a specific requirement to Prevent users from creating Manual Sales Orders in Oracle and yet users should be able to book the Sales Orders Imported from CRM system into Orcale.Please advise.

Thanks for your advise.
However, I missed to mention that we have two set of users One is for Finished Goods and another for Spares.
Only Spares users need to be prevented from creating Direct/Manual Sales Orders in Oracle.
As you suggested, if this will be done at Form level, that may Disallow FG users also to create Manula Sales Orders which should not be the case.
Further, I tried to test one scenario through Processing Constraints but it did not work.
Application
OM
Validation Type
Entity
Temp
Short Name
TBL
Validation Semantics
Created By
Equal To
User(Myself)
Processing Cosntraint
Application
OM
Entity
Order Header
Constraint
Operation
User Action
Create
Not Allowed
Conditions
Group
Scope
Validation Entity
Record Set
Validation Template
101
Any
Order Header
Order
Above Created
Please advise.

Mapping between Sales Order-Schedule-Line and Delivery-item

Hi together,
I want to extend the Datasource 2LIS_12_VCITM (Delivery-number, -item, Order-number,-item is available) by Sales Order Schedule Line.
Could not find any ERP table (VBEP and LIPS allow a mapping only on item level) for the mapping between Sales Order Schedule Line and Delivery item yet. The use of the extractor 2LIS_12_VCSCL for the extention (e.g. infoset) afterwards is no option.
Thanks for your help in advance!!
Assign full points!!
Sven

Hi Reddy,
thanks for your answer.
I know that I have to add this field.. but the problem is, how to fill this field. I don't know how to map the delivery-item with the schedule line-item.

Creation of sales order in CRM and replicating it to Multiple ECC system.

We have a requirement for creation of sales order in CRM and replicating it to Multiple ECC system.
We have checked the following standard Adapter objects in transaction R3AC1.
BUS_TRANS_MSG
The initial flow contexts does not support target site type as R/3(SMOF_ ERPSITE). So we are not able to replicate the sales order from CRM
to ECC.
2. SALESDOCUMENT
Here the initial flow contexts does not support flow from CRM -> R/3 as we don’t see the target site as CRM.
Please let us know if the standard sap middleware objects don’t support the sales order flow from CRM to multiple ECC or is there any
other adapter object we need to use for this.

Hey Vijay Duvvada,
I hope you are already referred below sap note and which explains scope & how to do -
1084315 - Consulting: Information about the multiple backend scenario
1763516 - How-to: Basic Setup of MEP
As explained by Rohit Sharma data should be start flowing to multiple sites.
please let me know if it does help.
Regards,
Arjun

How to add three fields in Sales order item level and supress/hide many

Hi Gurus,
My client requirement is :
1. Three fields to be added at Sales order Item level and they should flow till billing.
2. Supress/hide most of the fields in Sales order, so that end user will be happy( thru SHDO how to do)
Please share your experiences and help me.
BEST REGARDS
Srikanth

Hi Subba Rao
in VA01 screen - Material /qty/ after entering this client wants to enter three more details say X/Y/Z
and after that he dont want to see maximum fields displayed in VA01 Screen.
I think it makes sense.
Regards
Srikanth

Dynamic data flow from sales order to delivery and vice-versa

Hi Experts,
One of our teams working for a client (transportation industry) on ECC 6.0 is facing an issue in relation to copying of partner data. (Ship-to-party address field changes to be precise)
Currently, whenever the partner address data changed in a Sale order, though delivery is already created prior to this change, the change done is dynamically getting reflected in delivery too. Further, if the partner data in the delivery is changed, this also is getting updated on the preceding document i.e. sales order.
We have checked the copy controls under VTLA and didn’t find any specific modifications made in this regard. Our question is:
Is there any configuration available in standard SAP through which the data updates (like header data viz. partner field data etc.) get dynamically updated forward and backwards in a sales flow(i.e. from sales order to delivery and vice-versa)
Your help on this will be highly appreciated.
Regards,
Jagan

if the partner data in the delivery is changed, this also is getting updated on the preceding document i.e. sales order.
The standard functionality is if you change the address of a partner function, the same will get reflected in an existing sale order. This being the case, can you reconfirm your statement that in delivery, if you change the partner function, the same will get updated in sale order also?
G. Lakshmipathi

Equal weighting AND   Unequal weighting in Vendor Evaluation ?

Hi Experts,
Can u pls explain me this small issue with Vendor Evaluation weighting
SPRO - IMG - MM - PURCHASING - VENDOR EVALUATION - Maintain Purchasing Organization Data - SELECT PURCH .ORG -
DOUBLE CLICK ON Weighting - THERE IS I AM SEEING THIS LIST BELOW - Equal weighting AND   Unequal weighting
REPETING. my client wants vendor evaluation   Unequal . so i have to delet the Equal weighting 5 line or what to do ?
can u pls explain me.
01 Equal weighting 01 Price 1
01 Equal weighting 02 Quality 1
01 Equal weighting 03 fecha/cantidad 1
01 Equal weighting 04 Serviceservicio 1
01 Equal weighting 05 servicio 1
02 Unequal weighting 01 Price 1
02 Unequal weighting 02 Quality 1
02 Unequal weighting 03 fecha/cantidad 2
02 Unequal weighting 04 Serviceservicio 1
02 Unequal weighting 05 servicio 1
Thanksin Advance,
Anthyodaya.

Hi Priyanka,
thank you for the reply . but finalley my question is
my client wants Unequal weighting .
so i have to delete that Equal weighting lines or not .?
i mean line of below list .which is in BOLD letters. ?
01 Equal weighting 01 Price 1
01 Equal weighting 02 Quality 1
01 Equal weighting 03 fecha/cantidad 1
01 Equal weighting 04 Serviceservicio 1
01 Equal weighting 05 servicio 1
02 Unequal weighting 01 Price 1
02 Unequal weighting 02 Quality 1
02 Unequal weighting 03 fecha/cantidad 2
02 Unequal weighting 04 Serviceservicio 1
02 Unequal weighting 05 servicio 1
can u pls explain me.
Thanksin Advance,
Anthyodaya.

Block Sales order from production and shipping.

Hi Experts,
I have a requirement to block sales order from production and shipping if the credit limit of the customer is beyound the allowed value.
Also sales order should not show demand for production until it has been released.
Can someone throw light on how to acheive this?
Regards
Balu
Edited by: balu umapathy on Sep 13, 2010 6:39 AM
Moderator message: please work yourself first on your requirement, ask specific question later if required, always search before posting.
locked by: Thomas Zloch on Sep 13, 2010 1:10 PM

I will pass only the Prod Order as input. And I should get the Sales Order information... Very important is I need the schedule Line Number along with the Sales order and item.
To recap once again,
In MD04..or in BAPI MD_STOCK_REQUIREMENTS_LIST_API, I pass the input
WERKS - Plant Code
MATNR - Material Id
Output should be like this,
MRP element                                     MRP Element Data
PrdOrder                                           OrderNumber/OrderType
CusOrder                                          Salesorder/Item/ScheduleLine1
CusOrder                                          Salesorder/Item/ScheduleLine2
PrdOrder                                           OrderNumber/OrderType
so with the output, how can I find the Salesorder/Item/ScheduleLine for a particular prod order? I think I am clear with my question.

In sales order gross weight and net weight are incorrect.

Similar Messages

Maybe you are looking for