IN SALES ORDER PLANT IS CHANGED BUT FM ACCOUNT ASSIGNMENT IS NOT CHANGED

HI ALL
while changing the plant in sales order  LINE ITEM FM  accounting assignment is not changing accordingly FOR THE PARTICULAR LINE ITEM.
FOR THIS REASON NO ACCOUNTING DOCUMENT IS GENERATING.
THANKS & REGARDS
MALA

solution found.
Mala k reddy

Similar Messages

  • Sales Order No profitability segment!! Account assignment error!!!

    Dear Experts
    We are running an MTO(make to order) scenario!
    First we create an contract in the system!Then we create sales order
    with reference to this contract!
    And when the sales order is sent to the planning department! They use
    TCODE:CO08 create production order with reference to the sales order!
    But we get an error message as follows:
    Account assignment cannot be carried out because of different origin no.
    Message no. V1134
    Diagnosis
    The sales document to which you want to refer is based on sales document 41033737 and item 000010.
    Therefore, the settlement and possibly inventory management are carried out using the number of the
    preceding document.
    ut when I entered the the contract in Co08 and then I am able to create
    the production order.
    And when I back to see the detail in the sales order ,I find there is no
    value in the account assignment to the profitability segment!!
    Why the sales order have no profitability segment??*
    Why we can not create production order with reference to sales order??
    It seems there are one problem!
    Thanks for any reply!!

    Please refer note 327195 or 35445
    thanks
    G. Lakshmipathi

  • In Sales order plant is not allowing to change

    Hi Guru's
    In Sales order plant is not allowing to change it's showing gray but some materials it's allowing to change plant. What is the reason for this error can any one please help me.
    dnr

    Hi friend,
    I suppose you cannot change the plant at order level if the material is created to a particular plant.
    As you say for few materials you are able to change, may be due to the fact that the material is extended to the other plants. You need to extend the material to the other plant in MM01 enter tha material and enter the industry sector and Material type and give the same material as the copy from material. A screen will pop up asking for the plant details. Here you can enter the other plant and tha material is extended to the other plant.
    Regards

  • SALES ORDER LINE IS CANCELLED BUT DELIVERY DETAIL IS SHOING AS BACKORDERED

    SALES ORDER LINE IS CANCELLED BUT still the DELIVERY DETAIL IS showing as BACKORDERED it should be in cancelled
    status.The Sales order (only one ex:3904854) is cancelled , however order in shipping transactions screen indicates order is on backorder.
    at that time of order cancellation the line level workflow error out due to the Workflow package is inactive .
    I tried to resubmit the error out workflow using retry option from the responsibility “Workflow Administrator” the workflow is completed with forcible option but still the delivery detail is in back order status not changing it to cancel status.
    Error Name :-4068 [Error Process Error: WF Error Message: ORA-04068: existing state of packages has been discarded  
              ORA-04061: existing state of package body "APPS.XRX_SUPPLIES_NEW_WF_PKG" has been invalidated    
              ORA-04065: not executed, altered or dropped package body "APPS.XRX_SUPPLIES_NEW_WF_PKG"                         
              ORA-06508: PL/SQL: could not find program unit being called: "APPS.XRX_SUPPLIES_NEW_WF_PKG" [Error Process           Error: 3114: Activity 'WFERROR/R_ERROR_RETRY' is not a process.]
    Error Stack: Wf_Engine_Util.Function_Call(XRX_SUPPLIES_NEW_WF_PKG.XRX_CLOSE_LINE_DETAILS, OEOL, 55098479, 195982, RUN)
    [Error Process Error:   Wf_Engine.CreateProcess(WFERROR, WF5147218, R_ERROR_RETRY) ]

    Mohan
    You need a simple script to get the status corrected. Log an SR or search metalink for the script. I am sure there is one out there (if you search with the orphan reservations). This script supported, but not exactly targeted at your problem But it will solve it. You can log an SR and confirm.
    Thanks
    Nagamohan

  • Next date in sales order, how to change it? if change it does it triggres

    Quick and simple question... what can change a Sales Order Next Date (field VBAK-CMNGV)?? it got changed for one of my Sales Orders according to the changes log via VA02, but no idea how... as I can not see the field via VA03.
    Appreciate any help in this regard,
    Next date in sales order, how to change it? if change it does it triggres credit check
    Thanks
    Krishna

    Hi,
    The next date available if you activated payment card processing
    In the sales order header, this field specifies the next planned delivery date and In the delivery header, the field specifies the next planned picking or goods issue date.
    This field is used in connection with next delivery/service
    If you are not using payment cards in sales order then this will not impact any of your business transaction
    Go to HEADER >> Tab PAYMENT CARDS
    kapil

  • Delta sales order replication, per change to billing block, how?

    Issue: We want a change to sales order billing block field to trigger creation of a sales order delta replication IDoc, but having trouble getting that to work.
    We added entry to table TBD62, for table VBAK, field FAKSK (billing block field), so change pointer would be created.
    We have variant for delta replication set up on program ODTF_REPL_CO_SALESORDER_ITM.
    A change to billing block field creates entry in table BDCP2, so change pointers are getting created successfully.
    But running program RBDMIDOC for message type ODTF_COBJ_SALES_ORDER_ITEM, which should create the delta IDoc via the delta variant on program ODTF_REPL_CO_SALESORDER_ITM, does not create an IDoc.
    If I change a partner on sales order, such as revenue manager or engagement manager, and then run RBDMIDOC for message type ODTF_COBJ_SALES_ORDER_ITEM, then the IDoc gets created.
    So need help on how to set up so a change to billing block field, field VBAK-FAKSK, will trigger creation of sales order delta replication IDoc.  There seems to be more to it than just having change pointers get created in table BDCP2.
    thanks,
    Mark

    I found out why IDoc not getting created for change to billing block on sales order.
    SAP program ODTF_COBJ_SALES_ORDER_ITEM needs a fix.
    Sales Order replication program ODTF_REPL_CO_SALESORDER_ITM has this piece of code:
        LOOP AT cp_so_it.
          ls_vbpos = cp_so_it-low.
          IF ls_vbpos-posnr IS INITIAL.
            APPEND ls_vbpos TO lt_vbeln.
          ELSE.
            APPEND ls_vbpos TO lt_vbpos.
          ENDIF.
        ENDLOOP.
    For changes to table vbpa, for example, since vbpa key has posnr, ls_vbpos-posnr will have a value, and this code works.
    But for changes to vbak, which doesn't have posnr in table key, ls_vbpos-posnr here is blank, not initial, and this code doesn't work.
    eg. CDPOS-TABKEY/BDCP2-TABKEY for vbpa change might be something like "1300040000560000000RM", but for vbak something like "1300040000560".
    This data feeds this IF statement above, which fails for changes to vbak data in triggering IDoc replication correctly.
    ODTF_REPL_CO_SALESORDER_ITM should be modified to handle vbak change pointer data without the posnr field.

  • Regarding UserExit in sales Order creation(VA01), change(VA02)

    *Hi Gurus,*
    we are having one requirement that we have to change User status at item level in sales Order creation(VA01), change(VA02) according to certain condition( condition is if user status at item level is 'SGUC' then we need to get item category and with this item category we have to find new user status from our custom table).
    *So is there any FM or user-exits to set the User Status of the Sales Order Line Item at the time of Order Creation(VA01) or Change sales order(VA02) but before saving.*
    *looking for your inputs.*

    Check,
    In include MV45AFZZ
    Routine USEREXIT_SAVE_DOCUMENT_PREPARE
    In include RV45PFZA
    Check with USEREXIT_SET_STATUS_VBUK ,  USEREXIT_SET_STATUS_VBUP

  • Sales order with MRP run but no need of sales order stock while PGI

    Dear Gurus,
    We have scenario in company that we want to run MRP for sales order & generate requirements. But while doing post goods issue for same sales order, sales order stock need not be present.
    Please tell which planning strategy, strategy group or else should be used here.
    Thanks in Advance !!
    Thanks,
    Vishwas 

    Hi,
    Please configure in the following manner..
    create a strategy group say Z9..in this maintain main strategy as 20  and alternate strategy as 10... Now assign this strategy group to material in material master in MRP3 View..
    Now create sales order say A and run MRP with MD50..after completion of production you will get Sales order stock.. now convert this sales order stock unrestricted use stock..
    Now before you are doing PGI for sales order A... go to sales order change VA02 and change the requirement type to KSL from KE and then system will all you to do PGI with unrestricted use stock...
    Thanks
    Kumar

  • How to trigger an Idoc from Sales order creation and change

    We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
    Follow the below steps:
    1. Go to NACE transaction
    2. Select V1 application and select OUTPUT TYPES
    3. Select the required output type and double click on Processing routines.
    4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
    5. Save it.
    message type ORDERSP in the distribution model (BD64).
    Follow the below steps to configure the condition records:
    1. Go to NACE
    2. Select V1 application and select CONDITION RECORDS
    3. Select the requred output type and click on Condition records
    4. Selection screen will be displayed.
    5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
    Sales doc type = OR
    Funt = SP
    Partner = blank. It means there is no restriction on partner numbers.
    Medium = A
    date/time = 4
    Lan = EN.
    Note: partner is left blank means, the sales order of type OR can be send to all partners.
    6. Save it.
    We also done ALE configuration.
    We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
    Kindly suggest the solution.
    Regards,
    Sharad Dixit

    Hi ,
    Please check the total error description and diagnosis as below :
    InVa02 enter SO  go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
    Please paste the diagnosis .
    Thanks and Regards,
    P.Bharadwaj

  • User Exit/BADI for Sales Order Line Partner Change

    I am looking for a user exit or BADI which gets triggered when partner function of a sales order line is changed.
    My detailed requirement is-We have created a new Partner Function - END CUSTOMER(EC). Requirement is to trigger a business logic whenever the End Customer partner function is changed from its default value to anything else.
    If you have any suggestions please let me know.

    Hi
    have a look at function module EXIT_SAPLV09A_004 .
    Cheers

  • Is there a Business Object for Sales Order Create and Change VA01 and VA02

    Hi experts -
    I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
    Thanks,
    Mark

    Hi Mark,
    I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
    - Subhodeep
    Edited by: Subhodeep on Aug 29, 2009 11:14 AM

  • Function module which uses both BAPI's for sales order create and change

    Please name the function module which uses both BAPI's for sales order create and change.
    BAPI_SALESORDER_CREATEFORMDAT2
    BAPI_SALESORDERCHANGE

    Yup.
    you must write a piece of code for this.
    with if else condition.first check if SO is exsist than use second FM to change it else create new SO from first FM.
    logic somethig like this.
    Amit.

  • EBS financial Sales Order Acknowledgement Address change

    Kind of a newbie question, new to apps space with 11.5.10.2, maybe I initially posted under the wrong forum
    Question on Sales Order Acknowledgement Address change
    our company recently moved to a new location so needs address change below our Company logo.
    Where Bill to: & Ship To: address fields are fine. Just the organization address needs to be changed below our company logo.
    Was going back & forth on the Navigator -> Application Developer -> FlexField : Descriptive -> Segments {Order Management}
    Looking for the rights fields to be update so it gets changed in the SO Acknowledgement when it gets published through the XML publisher I believe.
    Thanks for you help in advance.

    In addition to the function in the previous reply, you may use table VBPA and ADRC to get the details
    Raj
    Reward points if helpful

  • MB11 - 411 E stock to sales order posting to wrong G/L account

    MB11 attempt to post to a sales order 411 movement results in an error.
    G/L account 5120000 blocked for posting in company code 1101
    It is referencing the wrong G/L account.  It should be 1151020

    resolved this.  materials in question were simply setup in the wrong (old) semi finished valuation class.  Had to remove all demand...reverse movements on the PO, remove from PO, remove delivery, remove from the sales order.  Then change valuation class to 7910.  SAP is configured to relate the correct G/L based on valuation class and movement types.  good description here Movement type & G/L account determination

  • How to get all open sales orders of a customer and also account group

    I want to know the logic to find all open sales orders of a customer and also account group

    Hi,
    You can check the status weather a Sales order is Open or not by checking its billing status form the following:
    Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
    Rward points if helpful answer.
    Ashven

Maybe you are looking for