In Service contract, to change the valid form date on service code level.

Hi.
I want to change the price valid form date on service code level ( i.e. in condition)  in Service contract.
I know i can  do that with ME32 transaction but i have lot of Service contract with more then 10,000 line items
Is there any way that i can change in mass based on Service contract no. wise.???
Thanks in advance..
Edited by: VIKRANT HANDE on Sep 15, 2009 9:11 AM

Please check in KON* series table in SE16N transaction. I guess KOHN table may help you out. You can see other similar tables.
In any one of the table you will find validity data.

Similar Messages

  • How to change the valid from date of the bom header?

    ECM is active in the system.
    I want to change the valid from date of the BOM header with the help of a change number.
    How can I change it?

    Hello
    Lets assume that, we are going to change Management for controlling Valid From date
    Steps to be followed for creation of Change No
    Tcode CC01 for Change No
    Click on Change Master
    Once you enter into Change master, maintain the description
    In the Valid from Date, maintain the date from which you BOM should be current
    Maintain the Status (01)
    Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
    save the Change No
    After the change no is created
    Enter the Change No during the creation mode of BOM
    THe system copies the Valid from date from Change No

  • Help reqd on Changing the Valid from "date"  for both BOM & Routing

    Hi all...
    Pls advise me how to do the changing of Valid from "date"....
    Is there any process in CC01 or ECM???....
    pls reply me in detail step format (step by step analysis)....
    I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
    How to change to my actual one......
    I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
    Pls reply me in detail....will be rewarded at the end while closing this issue.
    thanks & regards
    sankar

    Dear Sankarbabu,
    IF there's no setting for Date Check in OS54 - Engineering Change Management
    Control Data,then you can create a change number with past dates,and also to
    use the same one for changing BOM.
    Tell me one thing you are saying you want to use ECM.Was the earlier one
    created without BOM was created without an ECN?
    See already if you have created your BOM with an ECN,then remove the date
    check setting which I have mentioned in OS54.
    Now goto T code CC02 ,enter the Change number and give the valid from date as
    01.10.2007.
    After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
    I'm sure this will solve your problem.
    Regards
    Mangal

  • Wants to change the validity from date in BOM

    Hi,
    We have created BOM by mentioning valid from date 21.08.2018.
    Now we need to change that valid from date 21.08.2018 to 21.08.2008.
    How can we do that?
    thanks/regards
    vish

    Hello,
    If you are creating the BOM wr.to change number & if the change number date is lying in future. System allows you to change the effective from date for the ECN, which in turn BOM effective date also get change automatiocally. T code CC 02 for changing the date through ECN
    Maruti

  • How to change the submit form data - standard e-mail text?

    everytime, when submitting data of a form, in the e-mail appears a standard text like below:
    The attached file contains data that was entered into a form. It is not the form itself.
    The recipient of this data file should save it locally with a unique name. Adobe Acrobat Professional 7 or later can process this data by importing it back into the blank form or creating a spreadsheet from several data files. See Help in Adobe Acrobat Professional 7 or later for more details.
    My experience shows, that this may confuse the user. I would like to write in a simple way, for example:
    Thanks for submitting form....
    My question: Is it possible to change this standard text, and if yes how?
    I would be grateful for any comment or advice!

    Dear Gilad,
    Thanks for your fast answer! Yes, mailDoc specifies the text for the email. This is working fine!
    But what about the form data as attachment? the attachemnt is missing.
    Best regards!

  • Changing The Validity Dates In Org Model in CRM- User Level

    Hi
    How can we restrict the Validity Dates in Organisation Structure at User Level.
    I need that the user should be given some specific dates<b> ( Valid till or assigned till )</b> while assigning in the org. And it should be visible always in the Org Model.
    We tried using Delimited Date Function, but the User gets ellapsed if the Validity is expired.With the business point of view, <b>the requirement is that all user should be listed in Org model with respect to any dates.this would mean that if a user is terminated we would want to change the Valid till date in the Org</b>

    Hi Amrita,
    Business partner number and Object ID is automatically determines by system when creating a org unit.
    I dont find any configuration to create org unit with your own BP number and object ID. You have option to make repairs to the existing org unit.
    Please find the below path to repair the org unit
    IMG -> CRM -> Master Data -> Business partner -> Integration Business partner -Org management -> Create Business partner initially
    Select the org unit and execute to get all the org units.
    You can select the org units with errors /warnings and click on start repair to get automatic assignment of BP.
    Hope it helps
    Reward points if it helps
    Regards,
    Madhu

  • How to set the Valid-to-date (datub) of a BOM item

    Is there a way I can set the "Valid-to-date" of a BOM item?
    According to SAP documentation...
    Quote
    <i>"If you change a BOM using a change number, the system determines the valid-to date dynamically."</i>
    Unquote
    I want to "expire" a BOM item. Meaning I want to set the valid-to-date to a date in the past.
    Is this possible at all?
    Thanks for any input.
    Fred

    Ferry,
    Thanks for you reply.
    I do not see a field for the "Valid-to" date in the function module - CS_BOM_EXPL_MAT_V2. There is one for the "Valid-From" date called DATUV. But I would like to change the "Valid-from" date of the BOM item.
    Or is there another way to set the BOM item's valid-to date using this function module which I am missing?
    Fred

  • Is this possible in TIDAL , Change the Lotus Domino Server (LotusDominoData) service Startup Type from 'Automatic' to 'Manual

    1) Shutdown the Domino server (Lotus Domino Server (LotusDominoData) service)
    2) Change the Lotus Domino Server (LotusDominoData) service Startup Type from 'Automatic' to 'Manual'
    3) Reboot the server
    4) Defragment the drive (D:\ or F:\)
    5) Change the Lotus Domino Server (LotusDominoData) service Startup type from 'Manual' to 'Automatic'
    6) Reboot the server
    Any help would be appreciated.

    Binu - are you wanting to automate this process with TES?
    There is a windows cmd command "net stop" and "net start" you can use to stop and start a service.
    You will need to work with your windows admin or look online for a command line way to change the service to manual and to start the defrag.
    There is a shutdown command that can be run from cmd. It has a switch to force the reboot.
    You might also check out scripting with WMI.
    Hope this helps,
    Michelle

  • How to change the schedule line date in SO with reference to value contract

    Hi SD Guru's,
    I need to change the schedule line date in the sales order with reference to the value contract by using some algorithm that i will write. The problem that i can't find the suitable place to add the algorithm. I can't add it to the Copy control because there is no schedule lines in value contract and copy control for schedule lines does no exist.
    I can not add to user exit MV45AFZZ  , because order that was created with reference to the value contract, does not go through this user exit.
    Do you have some ideas where i can add it?
    Thanks and Regards
    Viky
    Edited by: Viky Sloutsky on Oct 20, 2010 12:43 PM

    Hello Viky
    How about using program MV45AFZB- USEREXIT_CHECK_VBEP or USEREXIT_MOVE_FIELD_TO_VBEPKOM
    or program FV45EFZ1- USEREXIT_CHANGE_SALES_ORDER
    Does the program go through these exits when an order is created with ref to a value contract??
    Also I am wondering why you need to change a Schedule line determined by Availability check and/or delivery scheduling?

  • Change the PDF form In HAP_DOCUMENT

    Hi Experts,
    1)I have a requirement wherein i need to change the pdf form that is generated when we click on download button in hap_document bsp application. I need to use the custom PDF form in place of the actual PDF form. How can i acheive this?
    2) In the layout, i want to replace some part of the screen with an interactive adobe form how to acieve this?
    Thanks and Regards,
      Madhu.

    This should not be handled by ABAP. If they were able to change it in the sales documents, they should be able to cancel the invoice in VF11 and create another one. That's the best practice.

  • Change the validity date in change number

    hi team,
    I want to change the validity date of a change number from 01.01.09 to 01.03.09. I am getting an error "A BOM has already been changed using a change number with the same valid-from date as the selected date 03.01.2009".  I can change the date to before 01.01.09 but cannot after 01.01.09.
    Can you please help me.
    thank you,
    Satish

    Dear Mamiditi Satish Kumar,
    Is it a change number with release key or without release key?
    Do you want to assign a different validity date for the changes made using that change number?
    Try using alternative date field in CC02.and you have to select the object to assign the alternative date.
    Say if you want to assign an alternative date for a processed BOM,you have to select that object and
    enter the alternative date.
    Regards
    Mangalraj.S

  • Changing the validity date of a work center.

    Dear SAP Guru,
    We are trying to change the validity date of a certain work center via transaction code CR02, however, we can only see the changed validity date in the validities tab (Costing View) but still the default validity date is the first validity created. We are trying to delete the Cost Center assignment for the unwanted validity date but still it came back to the first validity created. Is this a natural SAP behavior or is there something that we still need to do so that we can default our desired validity date?
    Thank you in advance for your help.
    Best regards,
    JMT

    Dear,
    Go to KS04.. enter the cost center. Enter the time period for which u want to delete the cost center. enter the date upto which u wanted the end date as the start date of the deletion.... it will delete the cost center for the future time period.... this will do....Then create new one and assign to work center and then check.
    There is no validity period for work centers...this will be available as long as you use in the routing.
    Hope clear to you.
    Regards,
    R.Brahmankar

  • How to Change the Validity period

    Hi All,
    Could any one please explain how to change the validity period of SAP as when i am trying to post the PO with a delivery date in year 2011 it is not allowing me more than 2010 year. When i checked in Calender Maintenance the last entry in it is 2010. When i am trying to change the validity of the Indian settings it is not allowing me to change the year from 2010 to 2012 or any other.
    regards
    PSNG

    Hi,
    Just check "FOPC_CONSIST_CHECK" T-Code .
    Acthually this is for "Consistency Check on Validity Period"
    I am not very sure weather change option is there or not.
    Thanks
    Mayank

  • Urgent:How do i change the validity period of cost element !!!!!!!!

    How do i change the validity period of cost element like:
    From 03/01/2008 to 01/01/9999
    To 01/01/2000 to 01/01/9999
    Please help me.I will assign you points.Thanks in advance.

    hi,
    pls go to t.code ka02 and select that particular cost element and go to menu bar and select edit -analysis period and select other analysis period there we can change
    if it is useful to you pls assign the points
    Thanks & Regards
    phaneendra

  • How to changed the Cost Center Date

    Hi All,
    I have an issue. Cost center is created which have a valid date from 10.01.2009.
    Upon checking my set up in the SAP my default date format it is DD.MM.YYYY.
    It have mistakenly inputted a different date instead of October 1, 2009 it inputted January 10, 2009.
    To resolved: When i went to KS02. I could not edit the valid dates just the master information. And also in KS12.
    Is there a way i could change the valid dates of the cost center?

    Hi,
    But did you succeed to delete it via KS04 or not? If there are postings in this period, then obviously, it won't be possible to delete it and the validity period could not be shortened retroactively anymore.
    Regards,
    Eli
    P.S. OKEON won't help you...

Maybe you are looking for