In SM21 ::Status: 90% of PAGFIL01 is in use

Hello All,
In our Productions systems in sm21 we are getting below alerts on frequently
SM21:
Status: 80% of PAGFIL01 is in use
Status: 90% of PAGFIL01 is in use
Documentation for system log message P0 9 :
If this utilization degree is reached frequently, you should increase
the maximum size of the file concerned in the SAP profile:
for the paging file: rdisp/PG_MAXFS
for the roll file:   rdisp/ROLL_MAXFS
This message is repeated only if in the meantime the utilization degree
falls below 80%.
How to find current status of the pagefile at OS level or R3 level...........?
Help me on this please............
Cheers,
Pratyu

Hi，
You can check the paging used in SAP side with TA ST02 -> paging area
Usually, the solution is to increase the page size(rdisp/PG_MAXFS and rdisp/PG_SHM) if you have free disk space.
Regards,
Snow

Similar Messages

  • How to validate material status in physical Inv Doc creation using MI01

    Hi Experts,
    I would like to know how to validate material status while creating physical inventory document using MI01 transaction.
    I tried to figure out a suitable BADI and customer exits ,but it didnt work out well.
    Kindly share your thoughts on how this can be achieved.
    Regards,
    Mohammed Aslam Rasheed

    Do you really create your inventory documents with this MI01 transaction manually by entering material for material?
    The real transaction for physical inventory is MI31. How do you want SAP to react if hundreds of materials are selected and inventory documents are created in a batch process?
    SAP takes care about the material status in MI04 and MI07 transactions.
    I am not aware of any exit for MI01 maintenance, you may consider Explicit and Implicit Enhancement Options

  • How do I restore my Admin status for a program in Applications using 10.6.8

    How do I restore my Admin status for a program in Applications using 10.6.8?

    Is this the file that does not have the desired priveleges? I think that's correct. If so, then open Terminal in the Utilitie folder. At the prompt enter:
    sudo chown -Rf root:admin [dragged file goes here]
    Leave a space after "root:admin" and drag the file you need to change into the Terminal window. Press RETURN. You will be asked to enter your admin password. It will not be echoed to the screen so type carefully. Press RETURN again.
    This will change the priveleges of the file to the default for the Applications folder.

  • How to check status of a particular port by using netstat command?

    How to check status of a particular port by using netstat command?
    I want to check  port 443 in my server is open or not, is there any other way to check port via commandline?

    Hi,
    You can run the below command in an administrator command prompt on the server:
    netstat -ano|findstr ":443"
    -TP

  • To know the Status code of a HTML page using Javascript

    To know the Status code of a HTML page using Javascript

    Hello,
    I am not sure to understand, which status are you talking about? The HTTP Status?
    If your javscript is executed it is more or less sure that the HTTP Status is 200 since the request is back to the browser.
    or are you talking about this is in the context of a XMLHTTPRequest call ?
    Regards
    Tugdual Grall

  • Find status of a sales order created using EDI IDOC

    Hello everyone,
       I have IDOC created for incoming sales order using FM 'IDOC_INPUT_ORDERS'.
    When a sales order is created manually iva VA01, it prevents the order from being saved when a specific error is hit unless user resolved it first.   However, when the order is created via EDI IDOC, the error is hit and it cannot be created.  In the sapmv45a program, i will to say that if it is an EDI IDoc transacion for the order, let it bypass the error and create the order.  
         Can anyone pls tell me how to check the status of a sales order being created using EDI IDOC ?
    Sy-batch does not work.
    Thank you in advance.
    Joyce

    Joyce,
    If you pay attention the code in FM it is exporting value of da_edi_sign to memory id "SD_EDI_ACTIVE" stored in constant "da_memory_id". ('CONSTANTS: da_memory_id(13) VALUE 'SD_EDI_ACTIVE'.)
    In your program you have two you have two options.
    1. Declare a constant as in the FM and use that as mentioned below:  
    CONSTANTS: da_memory_id(13) VALUE 'SD_EDI_ACTIVE'.
    IMPORT v_memid FROM MEMORY ID da_memory_id.
    2. Hardcode memory id as below:
    IMPORT v_memid FROM MEMORY ID 'SD_EDI_ACTIVE'.
    Hope this resolves your problem.
    Gajendra

  • System Status check boxes into Quick view (using Tables)

    Dear Experts,
    Please suggest, whether there is any method to get System Status Checkboxes, into the selection screen, while creating a Quck View /Infoset query using Tables only.
    Regards
    Jogeswara Rao

    Narasimhan,
    Thanks for responding.
    As rightly said by you, i spent lot of time with this option. but my problem is:
    - When I give NOPR or other status in the field and execute, one norification appears multiple times in the output (Using VIQMEL, JEST, TJ02T, CRHD etc)
    I cross check these results with IW28 output, and find lot of deviation in the record count, due to this multiplicity.
    Then I used the logical database (Notifications), Here the System Status checkboxes appear on their own and the results too are accurate. But this selection screen is not acceptable, because there appear lot many components which are not not required (you may recall my other query on SHD0)
    This is the whole case.
    As an alternative solution this post, may help in avoiding the repeating lines in the Query explained above.
    Regards
    Jogeswara Rao

  • Try to change 'Card Status' but reponse is"Conditions of use not satisfied"

    Dear
    I tried to change card status from "INITIALIZED" to "SECURED" after putting 3 keys.
    However it says "Conditions of use not satisfied"
    APDU that I sent is below
    => 80 F0 80 0F 07 A0 00 00 00 03 00 00 ............
    (30 msec)
    <= 69 85 i.
    Status: Conditions of use not satisfied
    I have 2 questions.
    1) Do you know why?
    2) Do you know what is the "Initial Key of JCOP Cards"
    Is it 404142434445464748494a4b4c4d4e4f ?
    Any help would be greatly appreciated.

    Ok well in playing around with my code, I had narrowed the problem down to a cipher object that I was using for signing (even though I was explicitly setting it to null when the applet was uninstalled). I store the key that I pass into the init call in an array - I changed this array from static to non static and that has made the problem go away. However I am not sure why. Does anyone have any thoughts on this?
    Edited by: Swati Patel on 07-Sep-2011 00:40

  • The total goods movement status not changed after goods receipt using MIGO

    Dear gurus:
    when i use T-code MIGO doing goods-receipt against Inbound delivery, the total goods movement status don't changed. i tryed VL32N to do goods receipt, and the status changed.
    how can i do to make the status change when i receive goods in MIGO against inbound delivery?
    best wishes,
    David

    Hi,
    If your MM is integrated with WM (SU mgt or HUM) you have to post the GR with Inbound delivery.
    Amit

  • Setting the Status of Document in CV02N/CV01N using BAPI

    Hi,
    I want to change the status of a document(DIR) in CV02N transaction. I found a BAPI 'BAPI_DOCUMENT_SETSTATUS'. But the status is not changing when I am trying to change the status from INWORK to RELEASED.
    Please help me ....
    Thanks in advance..
    Regards,
    Shankar

    Hello,
    Could you please put your code in the thread to have a better understanding.
    CU,
    Pelaez Lopez Philippe

  • Status of the mail sending option using SO_NEW_DOCUMENT_ATT_SEND_API1

    Hi experts,
    I m using SO_NEW_DOCUMENT_ATT_SEND_API1 function moduel for sending mails to dealers. That is, whenver i execute a Z transaction, the customer invoice details are getting displayed in report output. At the same time, the same output data is sent as mail to the respective dealers.
    Now teh user is asking whether there is any possiblity for the end users to have a proof of the mail which is being sent from the Z transaction. If the mail is sent, the end user who executes the Z transaction (mail sending transaction) should have that mail in his/her SENT ITEMS. If the mail not reaches the dealer, then the user must identify the mail bounce identification.
    Pls tell me how to achve the same..
    Regards,
    Shanthi

    Hi,
    Yes it is possible..
    Just pass 'X' to the exporting parameter 'put_in_outbox'. The user can check the send mail in 'sost'. All the details of the mail will be there. This will be the proof that the mail was sent.
    Reg the 2nd part of your query, if the mail is not delivered to any reciepent or to particular recipient, the details will be there in the SAP outbox, that also you can see through transaction 'sost'.
    Thanks & Regards
    Rocky

  • How can i check PPAPI status of Flash Plugin in Chrome using JavaScript

    Hi,
    Can anybody help me to get PPAPI details of Flash Plugin installed in Chrome using JavaScript ?
    Thanks in advance.
    Regards,
    Pawan

    Mine looks VERY similar to what the link shows: , but mine looks like the following;
    Name:
    Shockwave Flash
    Description:
    Shockwave Flash 14.0 r0
    Version:
    14.0.0.145
    Location:
    C:\Program Files (x86)\Google\Chrome\Application\36.0.1985.125\PepperFlash\pepflashplayer.dll
    Type:
    PPAPI (out-of-process)
    Disable
    MIME types:
    MIME type
    Description
    File extensions
    application/x-shockwave-flash
    Shockwave Flash
    .swf
    application/futuresplash
    FutureSplash Player
    .spl
    NOW I have enabled the above one and disabled the unhighlighted one. In either case, and in one way or another, it's working a little better, but not without intermittent crashes.

  • Error 70  - Código do status 225: Rejeição: Falha no Schema XML da Nfe.

    Bom dia grupo!
    Nós estamos atualmente recebendo a seguinte mensagem de erro da SEFAZ relacionado aos batches que nós enviamos: Error status 70 "Error from the authorities" and Código do status (Status Code) 225: Rejeição: Falha no Schema XML da Nfe.
    Nossa configuração é 46C com muitos OSS notes aplicados (veja abaixo)
    Nós estamos realmente parados neste momento e não temos nem ideia de onde começar.
    Atenciosamente,
    Marc de Ruijter
    OSS notes for NF-e phase 2
    989115      Nota Fiscal Electronica (NF-e) - Overview Note
    852302      Implementation Overview ISS 2004 - Legal Change MP135/LC116
    759965      New Condition Formulas for MP-135 and ISS 2004
    747607      Basic Customizing for MP135 and ISS legal change Brazil
    980214      DDIC changes: PIS / Cofins Tax Law and Tax Situation
    981123      PIS / Cofins Tax Law and Tax Situation
    981687      NFe: For Services in Muncipio Sao Paulo
    934846      Syntax error: TYPE-POOL 'SXRT' is unknown
    979881      Message S 000 in NF writer when mandatory fields not filled
    980213      Nota Fiscal Electronica (NF-e) of SEFAZ - Phase 2
    1037070      NF-e of SEFAZ - Phase 2, Enhancement 01
    1014600      No output found for the Nota Fiscal
    1052575      NF-e of SEFAZ - Phase 2 / DDIC changes after shipment
    1043688      NF-e of SEFAZ - Phase 2, Enhancement 02
    1062468      NF-e: Multiple volume structure for XML file
    1062251      NF-e: Extension of BADI Interface FILL_HAEDER
    1070261      NF-e of SEFAZ - Phase 2, Enhancement 03
    1094041      NF-e of SEFAZ - Phase 2, Enhancement 04
    1000130      Public System for Digital Bookkeeping (SPED) - Overview Note
    1008306      SD: Manual changes of CFOP for services when ISS tax applies
    998194      Missing ISS Tax Situation in the Nota Fiscal
    1047606      SD/Brazil: Using of error log during Nota Fiscal creation
    120449      SD-Brazil Exchange variance error in Nota Fiscal
    92383      LSA:BR:SD: Tax laws in return nota fiscal
    689157      Nota Fiscal Split and number of Packages
    987882      ISS Tax Law (field J_1BTAXLW3) not copied from sales order
    989965      CFOP redermination in the delivery document not working
    909835      Message 8B 679 raised during the delivery process
    337554      SD: No. of packages in Nota Fiscal
    533046      Repair order inconsistent to object list
    920330      Error when changing the tax codes in a sales order
    998195      PIS/COFINS/ISS Tax Law and Tax Situation in SD
    104606      EDI/IDoc: Mapping IDoc types to ANSI X12
    1094041      NF-e of SEFAZ - Phase 2, Enhancement 04
    1105588      J_1BLFZF: Runtime error OBJECTS_OBJREF_NOT_ASSIGNED
         OSS notes for XML ver 1.1 and NF-e phase 3
    1065334      NF-e: Extension of BADI Interface FILL_ITEM with tax table
    1068615      NF-e: Extension of BADI Interface with SD document flow
    1079826      NF-e: BAdI Interface Enhancement for NF Messages
    1069919      NF-e: Partner in Block E should always be main partner
    1090279      NF-e monitor: automatic refresh upon user actions
    1093252      NF-e: ICMS tax situation in XML File and DANFE
    1113127      NFe: New XML Layout - Version 1.10
    1114348      NF-e - xNFe integration - backend
    1122294      Send/resend NF-e: fill VBFA for BAdI item method
    1124075      NF-e: Serie not taken from Contingency NF-Type
    1144194      NF-e: Cancellation/Skipping Reason
         Bug Fix notes for NF-e BAPI.
    1049946      NF-e: Adaption of Nota Fiscal Bapis
    1147934      NFe: Random number should not be generated for incoming NFes
    1150733      NFe: Randon number and check digit not cleared
    1154995      NF-e: NF BAPI - enhancement for NF-e processing
    1158622      NF-e: NF BAPI - no input of random number possible
         Bug Fix notes for Contingency process
    1158612      NF-e: Wrong partner in Block-E for Entrada
    1240212      NF-e: One time Vendor data not transferred to XML file
    1255450      NF-e: Jurisdiction code for one time vendor / customer
    1257030      NF-e: Country Name for one time vendor / customer
    1069018      Cancellation of incoming NFe shows error J1B_NFE 003
    1070077      NF-e: Protocol number and document status for Denied NF-e
    1145148      NFe: Cancellation for Contingency NFes
    1152263      NF-e monitor: wrong action status '7' for C-NF-e
    1146914      NFe: Synchronous call to messaging system from backend
    1149356      NFe: Dump when NFe is cancelled with MIGO
    1152081      NFe: Dump when NFe is cancelled with VL09
    1153533      NFe: Dump when NFe in contingency is cancelled with VL09
    1156116      NF-e: Contingency by stock transfers
    1160107      NF-e: Cancellation of contingency NF-e with DOCSTA = 1 or 2
    1161347      NF-e: Cancellation of Contingency NF-e - correction
    1238648      NF-e monitor: req. action '3' (send) wrong for swtch. NF-e
    1165953      NF-e: Numbering Gaps
    1244326      NF-e: Numbering gaps - Status update in table J_1BNFENUMGAP
    1245425      NF-e monitor: required process step - contingency
    1252567      NF-e: Resend of NF-e - rejected or with validation error
    1266344      NF-e: Action Indicator for NF-e with validation error
    1254565      NF-e: Synchronization of RFC call between ERP and xNFe
    1053626      MIRO: wrong document reference in nota fiscal
    1073259      NF-e: Transfers - Outgoing NF-e No. not taken by Incoming
    1153874      NF-e: GR for future delivery takes wrong NF-e number
    1174946      NF-e: Serie not considered for duplicate NF-e number in MIRO
         Miscellaneous bug fix notes
    1175538      NF-e: Reference between NF and NF-e
    1244881      NF-e: Mixed scenario in MIRO shows error 8B219
    1257422      MIRO: Error 8B 219 by posting of reference invoices
    1150843      NFe: Text for cancel reason not transferred to XML file
         Bug Fix Notes Group 2
    1059699      NF-e: Reference between NF and NF-e
    1139062      NF-e incoming: Posted via J1B1N -> Wrong Document Status
    1144199      NF-e: SD Billing and Contingency
    1145089      NF-e: Cancellation despite rejected cancel request
    1149787      NF-e: Wrong status-code text in NF-e history
    1151112      NF-e: cancellation-reason text gets lost (pre req of 1150172)
    1150172      NF-e monitor: selection leads to dump
    1068379      Creation of Billing document issues an error 8B 145 (pre req of 1145089)
    1152842      NF-e: cancellation reason does not work
    1154700      NF-e: Random number & check digit not stored in active table
    1073145      PIS / COFINS Tax Laws for Transfers (pre req for 1155231)
    1082527      Missing PIS / COFINS Tax Laws for Transfers (pre req for 1155231)
    997868      VL02N: CFOP, tax laws not copied from delivery (error 8B148) u2013 (pre req of 1155231)
    1155231      PIS/COFINS tax law in NF/NF-e by split valuated material
    1155424      NF-e monitor: Menu -> "Check MS Connection" does not work
    1159177      NF-e: FUNC J_1B_NFE_SET_STATUS_IN_BACKEND set as Rem.Enabl
    1161951      NF-e monitor: "Resend" functionality.
    1162232      NF-e: switch to contingency not possible after MSS Update
    1162512      NF-e: cancellation reason not initial at first-time call.
    1162629      NF-e: creation date gets deleted from NF-e data-base table
    1164283      NF-e: SCS '5' - upon authr.to cancel system does not cancel
    1165155      NF-e Monitor: BACK (F3) leads to cancellation
    1165360      NF-e Monitor: new selection parameter - creation user
    1168394      NF-e: Reference document not taken from Nota Fiscal header
    1168798      NF-e: User decision for used NF-Type for Material Movements
    1171383      NF Writer: Copy NF-e that was switched to contingency.
    799445      Nota Fiscal creation: Consideration of local dates (pre req of 1171383)
    1104003      NF-Writer: Serie not taken from Reference NF (pre req of 1171383)
    1156037      NF-e: NF-Writer allow reference with different NF-types (pre req of 1171383)
    1175759      NF-e: central contingency per business place - correction
    1239598      NF-e: Random number and check digits are lost in NF writer.
    1163888      NF-e: Random Number includes spaces (pre req of 1239598)
    1245425      NF-e monitor: required process step u2013 contingency. u2013 applied in bug fix notes no need to apply.
    1246700      NF-e: Wrong reference for NF entradas.
    1257688      NF-e: Update termination with error J1B_NFE 021
    1258021      NF-e: Dump by creation of NF header text for XML file
    1258974      NF-e: Monitor report aborts with DBIF_RSQL_INVALID_RSQL
    1265172      NF-e - Decouple RFC from DB Update
    1285851      NF-e: Cancellation of none authorized documents
    1288925      NF-e: References between NF-e and non NF-e
    1272677      NF-e: Cancellation for Material Document with serial number (pre req for 1288925)
    1247602      NF-e: Cancellation of material documents with serial numbers
    1163104      NF-e: Cancel Material documents with initial cancel reason
    1293944      NF-e: Cancellation of material documents with batch classes.
    1267128      NF-e: Cancellation goods movement with MVT 844 not possible (pre req for 1293944)
    1300000      NF-e: Decouple - Contingency
    1314856      NF-e: Decouple - Contingency in J1BNFE and VF01 & VF04
    1321837      F-e: Cancel of material documents not possible
    1092028      NF-e: Protocol number in NF-header overwritten (pre req for 1265172)
    1114283      NF-e: cancellation - document status cleared in J_1BNFDOC (pre req for 1265172)
    1234053      Local time / local date in NF header and NF-e XML (pre req for 1265172)
    1288994      NF-e: Decupling note 1265172 causes error for incoming NF-e (pre req for 1300000)
    1297042      NF-e: NF-e number missed in access key after decoupling (pre req for 1300000)
    1087535      RFFOBR_A,U:Doc.no should be filled with 9 digits in DME file Applied OSS note 1087535 to the object Z_RFFORIY1 which was copied from RFFORIY1
    1097455      NFE: Bank files should accommodate Doc. Numbers with 9 digits
    304961      Wrong boleto check digit with carteira data (pre req of 1097455) - Not relevant
    336117      Include due date factor in Boleto barcode for A/R (pre req of 1097455) - Not relevant
    705726       ITAU: Boleto has negative interest value (pre req of 1097455) - Not relevant
    846297      Func Mod - BOLETO_DATA not printing correct nosso numero (pre req of 1097455) - Not relevant
    852782       BOLETO_DATA - Corrections of note 846297 for Bredesco only (pre req of 1097455) - Not relevant
    1227478      Dump in payment run (F110) when XBLNR is empty
    1138278      NFe: Field PREDBC not filled in XML interface structure (pre req of 1149585)
    1149585       NFe: CST field required in XML file for taxes not in NFe
    1053855      VL02N raises error 8B 053 "Branch not foundu201D
    1165696      RFEBBU00: Error in batch input due to changes in Nota Fiscal
    1180402      NF-e: BADI methods FILL_HEADER and FILL_ITEM
    1180672      NF-e: Gap numbering check doesnu2019t consider the series
    1225338      RFEBBU00: Additional changes to the note 1165696
    1241922      NF-e: Report J_1BNFECHECKNUMBERRANGES xNFe adaption
    1244326      NF-e: Numbering gaps - Status update in table J_1BNFENUMGAP (Applied using other Kintana)
    1270813      NF-e: Year not included in the XML file
    1247264      NF-e: Error in RFC to /XNFE/NFE_CREATE after note 1241922 (pre req for 1274200)
    1274200      NF-e: Numbering gaps report sends SERIE with spaces
    1276185      NF-e: Numbering gaps report sends SERIE with spaces
    1294917      NF-e: Gap numbering check - several corrections
    1324538      Missing address for OT Customer in J_1B_NFE_CREATE_TXT_FILE
    1331432      NF-e: Numbering gaps report detects gaps for initial series
    1332167      NF-e: Rep. J_1BNFECHECKNUMBERRANGES aborts with error DC 006
    1092341      RFFOBR_A,RFFOBR_D: Performance problem while rebate calcula
    1237089      RFEBBU10:While uploading ITAU Bank returnfile- Error(F5 170)
    1051314      Check Digit missing from Boleto number (pre req for 1306966)
    1306966      J_1BBR30:XREF3 is not updated correctly with Boletofrom bank
    1005924      RFFOBR_A-The DME file does not include Rebate for ITAU (pre req for 1287633)
    1287633      RFFOBR_A: Discount amount not calculated correctly
    1234054      NF-e: function J_1B_NFE_MS_REQUESTS_DATA is not RFC enabled
    1297534      NFe cancellation problems in GRC
    1243964      NF-e: Adaption of xNFe interface of function NFE/NFE_SKIP
    1165746      NF-e: Cancel - Error log not updated
    1327465      The program /xnfe/update_erp_status is not updating R/3
    1326691      BAdI for controlling the RFC call of external systems
    1333136      Prevent simultaneous click on buttons in NF-e monitor
    1333742      NF-e got the status 218
    1354192      Validation rules: correction for fields TPLACA and T_UF1
    1373175      Lock object for /XNFE/NFE_CREATE to prevent double transm
    1376500      BAPIRET2 to provide the detailed information to ERP
    1267455      Not possible to create different DOCREF per item using BAPI (pre req for 1373321)
    1373321      BAPI_J_1B_NF_CREATEFROMDATA: DOCREF from Header go to item
    1328583      NF-Writer posting of NF/NFe when mandatory fields not filled
    1338166      NF-e: Random number and check digit lost after note 1328583
    1259918      NF-e: RFC calls for request for cancellation or skip
    1152140      NF-e: backend allows inconsistent new SCS (pre-req for 1298283)
    1162852      NF-e: Inbound errors missed in error log of Monitor Report (pre-req for 1298283)
    1163056      NF-e: Problems with printing via BADI method CALL_RSNAST00 (pre-req for 1298283)
    1276438      NF-e: Parallel Phase not identified in messaging system (pre-req for 1298283)
    1296515      NF-e: J1BNFE reset rejected NF-e after skipping request (pre-req for 1298283)
    1297823      NF-e: Cancelled NF-e shows wrong action indicator (pre-req for 1298283)
    1298283      NF-e: Skip for NF-e with validation error
    1362969      NF-e: check cancellation for billing documents
    1368159      NF-e: cancellation of invoices via original application only
    1370933      NF-e: Accept Rejection to Cancel - wrong status in monitor
    1376324      NF-e: Skip for NF-e with validation error
    1140579      NFe: Field length conflicts from backend interface to XML
    1357713      NF-e: Cancel of incoming NF-es does not update active table.
    1173018      NF-e: Field control for Random Number and Check Digit (pre-req for 1366320)
    1321517      NF-e: MIRO Credit Memos for NF-e shows error 8B 020 (pre-req for 1366320)
    1366320      NF-e MIRO:Save is allowed without mandatory fields filled for NFe
    1375066      NF-e: J_1BNFECHECKNUMBERRANGES ends too early, wrong subrc
    1375894      NF-e: J1BNFE authority check for company code
    1377879      NF-e: Report J_BNFECALLRFC aborts with message A098
    1379062      NF-e: posting GR after cancellation leads to wrong NF-e
    1357777      Cancel billing document without Nota Fiscal cancellation
    1380861      NF-e Resend(proc.stat.07) with Signature error impossible
    1362025      Error while sending Bacen Code EX with 0 on begining
    1249819      NF-e: Field MODFRETE filled incorrectly

    Bom dia Marc de Ruijter,
    Não dá para ler sua thread, mas imagino que seu validador esteja desligado.
    No GRC vá em SPRO --> SAP GRC Nota Fiscal Electronica --> Configure System Response for Each Tax Number (CNPJ)
    Para ligar/desligar o Validador basta clicar no check box na coluna Validation.
    Observação: Para correto funcionamento do GRC deve-se sempre utilizar o validador ligado.
    Após isto refaça seu teste, é provável que você receba um erro de validação para a NF-e. Veja em GRC Web monitor -> NFe Detailed View -> Validation History.
    Atenciosamente,
    Fernando Da Ró

  • Creating a Status column (IF statement/calculated column)

    I'm developing list for managing a project with 11 columns each representing a project milestone.
    We'll call them A,B,C...K.
    "A" representing a status of "Project Started" and K representing "Project Complete" with various statuses in between.
    When a milestone has been reached, the date is input into the appropriate column. So when the project is complete, there will be dates in all columns A-K
    I wish to incorporate a new column that indicates the current status depending on if columns A-K have been filled in.
    So if all columns are blank, a status of "Awaiting start" is indicated.
    If column A is filled in with a date, a status of "A" is indicated.
    If columns A and column B are filled in then a status of "B" is indicated.
    If columns A, B and C are filled in then a status of "C" is indicated. * * If all the columns are filled in with dates, a status of "K" is indicated.
    Any ideas? Some form of If statement in a calculated Status column?

    Hello,
    You can use nested if statement something like below.
    For example, I have one column named as 'Score' and the requirement is to perform quartile breakup based on score so for that I can use below calculated formula in my calculated column.
    =IF(INT(Score)>85,"85 Above"
     ,IF(AND(85>=INT(Score),INT(Score)>=80),"85-80"
     ,IF(AND(79>=INT(Score),INT(Score)>=75),"79-75"
     ,IF(INT(Score)<75,"Below 75","0"))))
    Have below links for more details.
    Calculated Field Formulas
    Examples of common formulas
    Thanks. Please mark it as an answer if it helped.

  • How to change & see the PO Status (Purchase Order Status) ?

    Hi Everybody,
    I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status?
    Please help me out asap.
    Thanks & Regrds,
    Nagaraju Maddi
    Message was edited by: Nagaraju Maddi

    Hi ,
    It is possible to Update the Pricing procedure in Old PO. For this what you need  to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
    Hope this will help you
    Best Regards,
    Pradeep Naik

Maybe you are looking for