In struggle with WRT160NL and 2X WAP4410N

Hello,
We have our Wireless network that loosing connection after 2 or 3 days of a normal functionning, we have to restart the APs each time.
The configuration is for about 100 users and seams for me to be simple and usual as for this cases :
router and 2 ap has the same ssid and pwd
router has been configured on chanel 6, the first ap on chanel 1 and the second one on chanel 11.
router has an IP and a dhcp configured for 192.168.1. LAN, and Wifi IP and active dhcp for the range of 172.30.1.50 - 172.30.1.250
router has AP fonction also
access points have 172.30.1.1 as GW and no dns configured on it
i have already tryed to conf this as with repeaters but always the same issue.
If somebody know any points for this please give an idea
Thanks and regards
Makar

Makar,
Have you updated your WAP4410N to latest firmware? The older firmware has problems with locking up and having to be rebooted. My AP has been successfully up now for 3 months without a reboot.
Another questions: You said you tried to configure this as repeaters but always same issue, what was the configuration of that set up as well?
Also have you check the location of each AP, making sure there not around any microwave admitting device or any large admitting EMI device. Many times this will cause problems you are experiencing.
Thanks,
Jasbryan

Similar Messages

I'm struggling with iOS6 and iTunes [new iPad Cellular]

Last night I connect my new-ipad cellular and was informed to update iOS6. And yes, I did agree to update. After iTunes downloaded and it started updating software + firmware as usual. I think there should be no problem. After finishing updating firmware, I received a notification from iTunes: your ipad is restarting... But in the end, nothing happened. My iPad stayed silent. Power button and Home button have no effect now. I tried to plug ipad to my mac again and restart iTunes. The same notification, saying that my iPad is in recovery mode and I need to restore. This loop never ends. And my iPad doesn't work again.
Please tell me what is the problem. if there is an issue of iOS6, software and firmware, please fix it NOW.
I want my iPad back to work.
All of my data was lost and I cannot use my iPad anymore. What a disaster!!!
PLEASE HELP ME!!!

Restart the Mac and hold down Command+Option+R. Choose to reinstall OS X. The version of OS X your Mac came with will be installed.

Struggling with SMTP and classic ASP application

I have a classic ASP application that I'm moving from 2003 to 2012. On 2003 it used CDONTS to send email, as this is not supported I am converting it to CDOSYS as follows;
Dim ObjSendMail
Dim iConf
Dim Flds
Set ObjSendMail = Server.CreateObject("CDO.Message")
Set iConf = Server.CreateObject("CDO.Configuration")
Set Flds = iConf.Fields
With Flds
.Item(cdoSendUsingMethod) = 2
.Item(cdoSMTPusessl) = 1
.Item(cdoSMTPServer) = "xxxx.xxxx.net"
.Item(cdoSendUserName) = "[email protected]"
.Item(cdoSendPassword) = "xxxxxx"
.Item(cdoSMTPServerPort) = 6000
.Item(cdoSMTPconnectiontimeout) = 30
.Update
End With
Set ObjSendMail.Configuration = iConf
Set ObjSendMail.Configuration = iConf
ObjSendMail.To = request.form("Supplier_Email")
ObjSendMail.Subject = "order from "&buname
ObjSendMail.From = request.form("copy")
' we are sending a text email.. simply switch the comments around to send an html email instead
ObjSendMail.HTMLBody = request.form("email_body")
'ObjSendMail.TextBody = "this is the body"
ObjSendMail.Send
However, it worked fine on 2003 but I get
CDO.Message.1 error '80040213'
The transport failed to connect to the server. on the send.
I think it's a problem with the SMTP configuration, but I don;t know how to check it.
Any ideas?
Regards
Pete

Hi,
As this thread has been quiet for a while, we will mark it as ‘Answered’ as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to unmark
the answer as you wish.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
Best
regards,
Susie

[iPhone] Really struggling with views and transitions. Please Help.

Hello All,
First off let me apologize; I've been trying to do this on my own, reading the docs and guides and such, but I just can not get this to work. I feel like once I understand this scenario I'll be able to learn the rest on my own.
Basically I have a simple sample project structured as follows:
MyAppDelegate: typical delegate class
MainViewController: View controller object associated with the main view
TitleViewController: View controller object associated with the title screen view
NextViewController: View controller object associated with the second view (after title screen)
I currently have 3 nib files, one each associated with MainViewController,TitleViewController, and NextViewContoller
the Title View has a button on it
The desired flow of the application is as such:
1) My AppDelegate initializes MyViewController when it loads
2) MyViewController contains the two other view controllers (they are instance variables in the class)
and loads in the TitleScreen View (via addsubview).
This works fine, I am having trouble with the following:
3) The button on the title screen is pushed telling MyViewController to transition the TitleView out and the NextView in
I have tried modifying the code from the Transition View app but its just too complicated for me at present and I can't get it to work.
Can a kind soul out there please provide detailed assistance...maybe the implementation code for those 4 objects I mentioned.
Maybe we can make some kind of tutorial or guide so that other people will find it useful as a precursor to diving into the Transition View Sample App?
I think it would be interesting to have two versions of this well; one that uses nib files for each view and one that does it all purely programatically. This would definitely help newbies like me see how the nib approach is handled behind the scenes.
Again, I apologize for my ignorance...I really am trying. Thanks.

hi scotopia,
i've gone thru that helpless state too, so i'm going to help you as much as i can
the way i did it is slightly different from yours.
on top of
myAppDelegate,
MainViewController, titleViewController, nextViewController (view controllers class)
i have titleView and nextView (view class)
and i did not use addsubview.
inside main view controller you will need to create the titleviewcontroller and nextviewcontroller.
and inside both titleviewcontroller and nextViewController, u need to create the rootViewController and their respective view objects, i.e. titleView or nextView.
inside titleView you define all your methods etc. that will take place in that screen. and place your button code here.
i've managed to trace my footsteps, and found out that the metronome sample code will be easier to understand.
i hope this helps.

Anyone struggling with gestures and font issuer since upgrading to Lion?

I am really frustrated since "uprgrading " to Lion!! I no longer have pinch and zoom functions except in safari!
wont work in any other program, including my desktop! I have tried resetting trackpad, restarting-- any other suggestions?
I also can't adjust the font size anymore? In mail I can only adjust the side bar to small or large? No controls over font in address book.
Am I missing a setting?

Hi,
Have you disable the adobe flash accerlator? or how about your wifi setting? is it a WPA? If yes, changed to WEP.
Try
Johnson mok

Struggling with DataInputStream and Socket...

Hi all,
I have the following problem. I need two remote hosts to exchange some data using a socket: the client is running on a Linux box and sends both ASCII and binary data. The server is running within a Tomcat server and needs to parse the ASCII text and then stores the (following) binary data in a DBMS. I chose to use DataInputStream to read from the socket: however, when I use the readUTF() function in order to get the ASCII data (the very first data sent is a simple banner) I get a EOFException (after some time, the banner is basically never read).
DataInput Stream dis = new DataInputStream(new BufferedInputStream(client.getInputStream()));
String line = dis.readUTF();
java.io.EOFException
     at java.io.DataInputStream.readFully(Unknown Source)
     at java.io.DataInputStream.readUTF(Unknown Source)
     at java.io.DataInputStream.readUTF(Unknown Source)
     at neptuneconsole.XXXyyyZZZ.run(XXXyyyZZZ.java:86)
     at java.lang.Thread.run(Unknown Source)
client is a socket instantiated by a ServerSocket that was created by SSLServerSocketFactory.
Any help will be REALLY appreciated!

mj4318 wrote:
readByte() itself does not block until some data are availableWhat does this mean? What does it return? If it returns -1, then you have reached the end of the stream - i.e. you have read everything the other end has written so far and the other end has closed the connection so it's never going to write anything more. If it's returning something other than -1, then that's the byte you've read from the connection.
This will really be a lot easier if you show us code.

Need Urgent Help with Apache and PHP

I have been struggling with apache and php for a week now and I finally broke down to post a message.
I have apache 1.3 running on my mac mini g4 with 10.4.9 and I installed sql. I went to the entropy website and downloaded php5 to install without knowing I already had php4 on the machine. I installed 5 but could not get it to work. I then went back to httpd.conf and tried to install php4 by uncommenting out the loadmodule and addmodule lines. I restarted apache but php still did not work. I tested the phpinfo.php script but all I got was the script in Safari and not the actual page. At the moment, I have php4 and php5 on my machine but can't get either one to work. I am sure there is an easy fix but I don't know it. Please help.

The problem is not terribly complicated, but Apache will not start with the entropy file in the folder
/etc/httpd/users/
Let me experiment on you. Rename the entropy file and then try to start Apache. To do this, open Terminal and paste this command:
<pre>sudo mv /etc/httpd/users/+entropy.conf /etc/httpd/users/+entropy<pre>
Now check the Apache configuration:
<pre>apachectl configtest<pre>
If it says "Syntax OK", start Apache:
<pre>sudo apachectl start<pre>
Since we only disabled the entropy file, you should be able to enable PHP5 with some more advanced configuring.

Scroll a list with touch and momentum

Has anyone got example code for scrolling a long list (using the List component) on iOS and/or Android using touch and momentum? I have been struggling with it and not getting anything like what I am looking for - and am feeling decidely dumb right now.

Mr.Backstrom,
I have changed the list template overide to dhtml Tree. And now the list is being displayed as vertical unordered list with bullets. Is it possible to take off the bullets? Thank you for your time.
Suma.

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says impo

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

I mistakenly wiped my mac ox from my macbook and i'm struggling with getting it fixed or getting a new one to install.

i mistakenly wiped my mac ox from my macbook and i'm struggling with getting it fixed or getting a new one to install. Can anyone help me? thanks
<Email Edited By Host>

Restart the Mac and hold down Command+Option+R. Choose to reinstall OS X. The version of OS X your Mac came with will be installed.

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly app

I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly appreciated.

Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
var subtotal=0;
for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
nfSubtotal.rawVlaue=subtotal;

HT1766 Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help pleas

Hello there, started to sinc my iPad 3 to my iPhone 5 with iCloud and a lot off the items did copy over, I was connected to a power supply but for some reason it's still missing half the items and I am struggling to retrieve them can you help please.
Thank you Callum Gordon

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

I have an old PowerPC and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same router, but the old Mac connects with full bars, but the MBP struggles with only 2. Pls help, thanks!

I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!

BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name:          Power Mac G4
Machine Model:          PowerMac3,5
CPU Type:          PowerPC G4 (2.1)
Number Of CPUs:          1
CPU Speed:          800 MHz
L2 Cache (per CPU):          256 KB
Memory:          768 MB
Bus Speed:          133 MHz
Boot ROM Version:          4.3.3f2
Serial Number:          XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>

Still struggling with Captivate 6, Oracle LMS and SCORM 2004

Still can't get this course tracking with scores. Herewith the screen shot. Does anyone know if the settings I have chosen for the quiz are correct. When I load the published course into the lms and test it, it shows "not attempted" prior to opening it and it gives the final score on the last quiz slide. There is a slide after the last quiz slide. It still seems not to transfer the scores to the lms. I recently found out that we have Scorm 2004 version 4, so I changed the configuration setting as it was defaulted to version 3, but that still hasn't helped with the scores. Under the start and end settings, I have chosen close project for the end. I have been through a week of torture with this course! Please can anyone assist as I'm not sure what to do anymore!

Oh no. Now I'm panicking! I will try it. Thanks
Mrs T Cassisa
Oracle Learning Management Practitioner
Tel: 27 (21) 403 3069
Fax: 27 (21) 403 3333
www.parliament.gov.za
>>> RodWard <[email protected]> 2/26/2014 11:20 AM >>>
Re: Still struggling with Captivate 6, Oracle LMS and SCORM 2004
created by RodWard in Quizzing/LMS - View the full discussion
This sounds like you have some major issue in this course project file.
Breaking it up into smaller files might not fix your issue.
I suggest you create a new blank CPTX project file, add one true/false quiz question, set it to report to LMS with the settings you have above, publish as a single SCO package zip file, and upload to both your LMS and SCORM cloud.
If this file doesn't even work, your installation of Captivate would have to be suspect and nothing you do in course module is going to fix that until you work out what the problem is. If this very simple single-SCO lesson plays OK and reports successfully to the LMS, then we need to figure out what is lacking in your current file.
It could be that your current file has somehow become corrupted. See the suggestions here for how to debug general corruption issues:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic- troubleshooting-techniques
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6158090#6158090
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6158090#6158090
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6158090#6158090. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Quizzing/LMS at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

I'm still struggling with being able to sync ipad3 and iphone 4s to itunes after upgrading software to ios 6. I've gone through all the recommendations by Apple and suggestions from other forums and nothing seems to work. Help!!!!!

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

In struggle with WRT160NL and 2X WAP4410N

Similar Messages

Maybe you are looking for