IN_SYNC status mobile

Hi, i need to solve a situation. I've some SyncBo's in IN_SYNC status in my mobile device. I solve the problems in the server, but when i synchronized the SyncBo's in IN_SYNC doesn't changed. I found a class in the API that is a observer that run before and after the synchronization.
I'm lost. I would like to be able return the SyncBo to a SYNC state.
Thanks.

Hi Julian,
When you have modified the data and sent it to the server during sync the status is changed to IN_SYNC. When the server responds to this change the status is changed back to SYNC. So the only way the status can be changed is when the response comes from the server.
Can you tell me what problems where there in the server and which SP level you are on?
One way to clean up the client is using the client data reset. You can find this in the Settings link -> Client reset button in the client device. This will delete all data in the client and re-request all the data from the server.
Best Regards,
Karthik

Similar Messages

Read/Unread Emails on Mobile and Desktop

Hello,
I am trying to set up my account on exchange online, I have purchased Plan 1.
How do I set it up so that when I receive a message and open it on my desktop, it shows as read on my BB device, and vice-versa?
I used to have an exchange account that linked my BB and desktop so that I could open a email on either one, and the message would be seen as read on another. It gets too confusing having the same email shown as unread.
Can anyone help me out?
Thanks

Hi,
Firstly, I’d like to explain, you are not alone:
http://blog.lanlogic.net/blog/blackberry-showing-unread-messages-but-they-are-all-read/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
And I guess it’s a synchronization issue. We can check the email status through OWA: if the email keeps read status, mobile device cannot sync with mailbox and we can refer to the following article to troubleshooting:
http://support.microsoft.com/kb/2563324
Additionally, according to your description, your account will be on Exchange online. I recommend you ask for more professional help on our Exchange online forum:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Best regards,
Angela Shi
TechNet Community Support

6300 phone memory status menu item location?

Hello there.
I got a 6300 yesterday and I've been reading up about the memory issues. I intend to use the memory card for everything I can, so it's not a problem really.
However, no matter where I look, I can't seem to find where to check the memory status of the phone in the menus. I obviously want to make sure I don't overload the memory because it's so small but I can't find where to check how much free internal memory I have.
Could someone direct me please?
Many thanks.

Gallery > Options> Memory Status
Mobile Royale - Latest News, Reviews and Software for Mobiles
Aero Everyday - Aviation News and Insights
GoMobile Forums-The best mobile technology discussions
Please visit http://alifeofmisery.blogspot.com or www.miserylife.tk and help someone smile.
Dreaming of a 5320XpressMusic - 128MB RAM makes up for the 2MP cam !

Can't call in or out on 8520

Hi All, hope you can help.
Blackberry 8520
Bought phone seconhand, put in my Tescomobile SIM
Recieved a welcome text from Tesco
Since then the phone apears to be blocked, it wont send or recieve calls or texts.
Manage connections > Service status > Mobile voice: not available
Connection: not connected
Options > advanced options > SIM card > SIM card: Security disabled
Thanks for taking the trouble to respond.
Laurie
Solved!
Go to Solution.

So, the device is unlocked as it needs to be.
I would contact your provider and see if they can help. it's possible the device was lost/stolen and the IMEI is blocked. However, only your carrier will be able to tell you.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Prime Infrastructure 2.0 no 'Add a WLAN' option

Hello,
I've started to pay with PI 2.0 and I've noticed that there is no option to add new WLAN.
I am following manual:
Step 1 Choose Configure > Controllers.
Step 2 Click the IP address of the appropriate controller.
Step 3 From the left sidebar menu, choose WLANs > WLAN Configuration.
Step 4 From the Select a command drop-down list, choose Add a WLAN.
but there is no 'Add a WLAN' option. The only ones I've got there are:
Delete WLAN(s)
Schedule status
Mobility Anchors
Foreign Controller Mappings
Does anyone know how to get that option there?
Thanks
Tomasz

Hi,
you're right that this can only be done with the template but to create one I needed to go to:
Design --> Feature Design
and then under Templates:
Features and Technologies --> Controller --> WLANs --> WLAN Configuration
There I've created new template for WLAN and then deployed it to controllers.
Maybe that's better way to do it, when you have many controllers.
Thanks
Tomasz

If for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar. My question is, I do not have this option. How do I get the sync to stop

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

"if for some reason u have the icon in your task bar (the one with 2 arrows pointing in a circle) just go into mobile me pref...click sync...and uncheck box show status in menu bar."
I do not have the option box to "show status in menu bar"
I tried the free for a little while Mobile me, and didn't use it, so cancled. I cannot get the sync status roundabout arrows out of my status bar. AND, they keep trying to sync.
Another issue related with this is that during the time that I tried out Mobile me, I had my ical alarm set to go off every 2 hours. NOW my computer has an ical pop-up every 2 hours. I cannot find how to stop it.
Another issue, Yahoo is trying to sync with my computer and I have no idea why or where that one came from.
Can anyone out there help me please.

After updating to ios 8.0.2 .when i'm unlocking the mobile wallpaper dont display . its shows only network and battery status .

after updating to ios 8.0.2 .when i'm unlocking the mobile wallpaper dont display . its shows only network and battery status .
then i need to switch off and switch the iphone. per day i'm doing this for 3 times.
mean while if some one calls ,its not displaying who is calling.
need to rectify this ASP

Hi Tarun 49,
If you are having issues with your iPhone such as you describe, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

How do I get facebook app to say a status via ipad instead of via mobile?, How do I get facebook app to say a status via ipad instead of via mobile?

When I upload a status with facebook on my ipad it says via mobile and not ipad. Do I need 3G or able to do it connected to wi-fi

Someone please help , is it because it is not an ipad app? Yet I remember when iPads where first out in the apple store uploading a status in store iPads said is ipad

ADF Mobile: HTTP Status Code 500 Internal Server Error

Hi,
I wrote a SOAP web service and deployed it to my standalone ADF Server. I tested it with the HTTP Analyzer, works great. I used it in a Web Service Data Control in normal ADF Web - works perfect. It returns a table of data as programmed. However, ADF Mobile gives me errors: "Http Status Code 500 Internal Server Error: The server encountered an unexpected condition which prevented it from fulfilling the request".
I developed an ADF Mobile interface with an amx page. I created the same Web Service Data Control and created a List View based on the data control. The error pops up every single time, both on iOS simulator and Android Simulator.
I know the simulators have network access to the web services - because i can open the web service test page and WSDL from both simulator's internet browsers.
I know the web services are running - because my ADF Web application can access it.
Any ideas?
Thank you!
-Gavin

Thanks for the reply. There were no errors in my WLS server. However, I will add some statements to my web service to write to the log file. That way i can see if or at what point is the web service is being accessed by the mobile app.
Thanks,
Gavin

Mobile DSD Help : "/DSD/ME_DDR_STAT" status on error

Hello All,
DSD Backend scenarios are working fine. We had sent all the master data and shipment IDOC's to the DSD connector and we see the data in the DSD connector tables. In the Mobile DSD application we are having problems in getting the data downloaded to the Nobile client. we noticed that afer the shipment creation in backend the status on the table "/DSD/ME_DDR_STAT" goes to the following status:
DATA_STATUS - N
TRANDAT_STATUS - S
PRCDAT_STATUS - N
and when we try to do a sync from the mobile device it says the
synchronization is completed successfully but the status on the table
changes to Error as mentioned below:
DATA_STATUS - E
TRANDAT_STATUS - S
PRCDAT_STATUS - E
We are not sure what is the issue. We had successfully implemented the
Pricing BADI and also did all the configuration that are related to the
DSD Pricing .
We had implemented the OSS note "1287227 - Price date status E
in /DSD/ME_DDR_STAT set incorrectly". Still the issue exists.
Any suggestions why the status is changing to Error and Master data is
not getting downloaded in to the MI Client.
We are at SP13 and I am using MI client for SP13 with path level 1 for SP 13.
Thanks for your help in advance.
Thanks,
Greetson

Dear ,
Could you please tell - how did u solve this problem?
I am also facing the same problem.. could you please help.
I am getting the status as E - S - E; which prevets the data to be downloaded to middleware then to PDA.
What coudl be the reason for this wrong status?
thank you
VEnkatesh
Edited by: venkatesh paulraj on Aug 2, 2010 12:02 PM

Mobile DSD data download issue : "/DSD/ME_DDR_STAT" status on error

Hello All,
DSD Backend scenarios are working fine. We had sent all the master data and shipment IDOC's to the DSD connector and we see the data in the DSD connector tables. In the Mobile DSD application we are having problems in getting the data downloaded to the Nobile client. we noticed that afer the shipment creation in backend the status on the table "/DSD/ME_DDR_STAT" goes to the following status:
DATA_STATUS - N
TRANDAT_STATUS - S
PRCDAT_STATUS - N
and when we try to do a sync from the mobile device it says the
synchronization is completed successfully but the status on the table
changes to Error as mentioned below:
DATA_STATUS - E
TRANDAT_STATUS - S
PRCDAT_STATUS - E
We are not sure what is the issue. We had successfully implemented the
Pricing BADI and also did all the configuration that are related to the
DSD Pricing .
We had implemented the OSS note "1287227 - Price date status E
in /DSD/ME_DDR_STAT set incorrectly". Still the issue exists.
Any suggestions why the status is changing to Error and Master data is
not getting downloaded in to the MI Client.
We are at SP13 and I am using MI client for SP13 with path level 1 for SP 13.
Thanks for your help in advance.
Thanks,
Greetson

Dear Greetson,
This generolly happens if there is some problem in the Pricing Data.
Please disable all the Sync Bo releated to pricing and again create a tour .....
check whether u are getting the required result.
Also check TRX: SLG1
I will try to update the thread if i could find something more useful for you.
Regards,
Akhil...
Edited by: Akhil Rastogi on Jan 30, 2009 10:31 PM

Mobility Group Member Down Status

The mobility group members from our guest controller have went into a down status twice since upgrading the 5508 WLC to software version 7.4.110. What can we do to remedy the problem?

1. First upgrade the WLC to 7.4.121.0 version (this is pretty stable).
2. paste the config and logs from WLC.
Regards
Dont forget to rate helpful posts

A t-mobile warning for prepaid customer with " gold member status "

I'm a member of t-mobile prepaid and i have gold status which is an automatic .10 an minute anytimes and is good for me since there is no contract and i get that 15% extra in refill with the regular refill
but there is a warning that t-mobile didnt want to tell or just too lazy but go to my t-mobile and make sure that they did jack up your rate if you have a " gold member status " because i when to my t-mobile and i notice instead of see my rate at .10 a min is jump to .35 a min that is a 20% they add it and " i was confuses and i was baffelled " and why did that happen and i e-mail them about it because i knew is was a big big big mistake
and guess what today i get a called and they told me " is was our mistake and were sorry we blame this on a computer glitch tought you were not a gold member " so here $25.00 for your trouble and your .10 a min is back
so make sure if you have t-mobile prepaid and that your are a gold member make sure is .10 a min

gbogeyone,
We are very sorry to see such loyal long term customers looking into another provider! We definitely understand looking to save and would be happy to check any options to save you money while staying a part of the Verizon family!
Billing when closing service does run through the end of the bill cycle. The reason for this is that when billing is prorated, it prorates the plans as well as the charges. As an example, if a 10GB plan was pro rated half way through the cycle, that would only give you 5GBs for that period. If you had already used 10GBs, you would end up with 5GBs of overage. Having that run through the end of the cycle avoids proration and keeps things simple. Because we do bill a month in advance it also means that the final statement will already be out at that time and the current statement will be the final one for service. I definitely apologize for any misinformation on that, that should never happen.
We'd love the opportunity to win your business back and continue this 10 year relationship. What plan have you had? How much data do you normally use? We are more than happy to help find a great option for you.
AndrewT_VZW
Follow us on Twitter @VZWSupport

Mobile Me status in menu bar

Does anyone know how to remove the Mobile Me status indicator from the menu bar? I don't use Mobile Me and prefer not to see extra clutter.

Assuming you mean the 'sync status' for Mobile Me? That's the only thing I have.
Open System Preferences, select Mobile Me and then the Sync tab. At the bottom there's a 'Show status in the menu bar' option.

ADF Mobile - Get network status

OS: OSX 10.8.5
JDEV: 11.1.2.4
ADF Mobile Extension version: 11.1.2.4.39.64.51
HI All,
I'm currently in the middle of developing an ADF Mobile application and exploring the offline/online capabilities and have run into an issue where i'm trying to determine if the user has network connectivity, but its not working properly. I'm trying to make the app as dynamic as possible such that, for every transaction that requires network access, the app will check beforehand whether it is "connected" or "disconnected". I've tried the following but not quite got there..
1) From the link below, Joe does make note that the EL Expression "#{deviceScope.hardware.networkStatus}" to resolve the network status is only evaluated at start up, which is good for when the app opens.. but not good when the user loses network connectivity.
Re: JDeveloper ADF Mobile -- Android Context
2) The link below uses javascript to evaluate the network connectivity. This works first time and every subsequent time afterwards, however, I would like the javascript to ONLY evaluate the network status and then populate a pageFlowScope variable with true or false. This bit also works fine. From here, it may seem that the pageFlowScope variable has been populated, but if the java method (which calls the javascript function to check the network connectivity) also includes code that reference the pageFlowScope variable that the javascript has just populated, it is not evaluated properly.
Example:
    public void checkConnection(ActionEvent actionEvent) {
        // This works fine and populates the PageFlowScope variable fine
        AdfmfContainerUtilities.invokeContainerJavaScriptFunction("feature1", "application.checkConnection",
                                                                          new Object[] { });
        // The two lines below do not work properly, as if its retained the old value of the pageFlowScope.
        ValueExpression ve = AdfmfJavaUtilities.getValueExpression("#{pageFlowScope.isConnected}", String.class);
        throw new AdfException("isConnected: " + (String)ve.getValue(AdfmfJavaUtilities.getAdfELContext()), AdfException.INFO);
Unwinding ADF: Offline Data Synchronization for ADF Mobile
Below is a link to a sample app that i made and the steps to reproduce:
https://app.box.com/s/ng5n362unttu7b88i42b
- Have network connectivity
- Click on the "Check connection via JS' button the first time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is INCORRECT
- Click OK twice
- Click on the "Check connection via JS' button the second time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is CORRECT
- Click OK twice
- disconnect your computer from the network/internet
- Click on the "Check connection via JS' button the third time
- The popup in the foreground is the javascript showing the connectivity, which is correct
- The popup in the background is an INFO AdfExpection showing the connectivity, which is INCORRECT
Has anyone has similar use case has have a work around/solution? This is driving me nuts!
Cheers,
Eddie

Hi Frank,
Thanks for the quick reply.
That's exactly what i've used in my javascript function in my demo app and that link is the resource i used as well, however, that javascript code does populate the pageFlowScope variable fine, however, if i make reference to that pageFlowScope variable from within the same java method that includes the call to the javascript function, it does not get the updated pageFlowScope value. Only after the transaction has fully completed and i then [for example] click on a button on the screen to evaluate the pageFlowScope variable again, do i get the updated value.
Having a stab in the dark, could it be something to do with the way the javascript is executed when updating the pageFlowScope variable and lifecycle of that transaction
I've also tried this under the code where it populates the pageFlowScope, but it can't resolve the expression, seems like i'm doing something wrong..
navigator.notification.alert('pageFlowScope value: ' + adf.mf.el.getValue("#{pageFlowScope.isConnected}", onSuccess, onFail), alertDismissed, 'Connected', 'OK');

IN_SYNC status mobile

Similar Messages

Maybe you are looking for