In t-code OBB8 - Short Dump "Field sysmbol has not yet been assigned"

Hi All,
  While entering into the transaction OBB8, I am getting the dump "GETWA_NOT_ASSIGNED" "Field Symbol Not yet been assigned" in R/3 4.6c release. If anybody have idea about this please suggest ....
Thanks in advance.
Varsha.

Hi,
This dump is due to code corrections made through the SAP note 933848. To solve this dump, you should apply SAP Note 948961 first, and then apply the SAP Note 948967. Please take help of your ABAP Consultant to apply these SAP Notes. These notes can be accessed through service marketplace (www.service.sap.com).
There is no functional reason assigned for the dump. Code correction is the way to resolve this.
Hope this information helps you.

Similar Messages

  • How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

    Hi Experts,
    We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
    So, for some reason the system message text is not getting output in ALV-->Dump!!
    So, found a NOTE causing this problem!!
    So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
    thanq
    Edited by: Srinivas on Jan 24, 2008 4:32 PM

    Hi
    In SNOTE tcode,  select the Note that you implemented and click on 'RESET SAP Note Implementation'
    shylesh

  • Field symbol has not yet been assigned. ???

    Dear Experts ,
    W hen i tried to execute my program this error appears :
    Short text
        Field symbol has not yet been assigned.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLSLVC" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to access an unassigned field symbol
        (data segment 32821).
        This error may occur if
        - You address a typed field symbol before it has been set with
          ASSIGN
        - You address a field symbol that pointed to the line of an
          internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    and Here is my CODE :
    *& Report  ZPO
    Report  ZPO1.
    type-pools slis.
      PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
      PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
      PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
      data TtlS type mara-wesch .
      data TtlH type mara-wesch .
      data Ttl type mara-wesch .
      data ZEKBE type TABLE OF EKBE.
      data ZEKBER type EKBE.
      data ZEKPO type TABLE OF EKPO.
      data ZEKPOR type EKPO.
      data ZEKKOR TYPE EKKO.
      data ZNAME1F type LFA1-LIFNR.
      data ZWGBEZF TYPE T023T-WGBEZ.
      data i type n.
      data counter type n.
    types : begin of SBAGDS,
      Serial Type n, "Purchase Order
      EBELN like EKKO-EBELN, "Purchase Order
      MATNR like EKPO-MATNR, "Material
      TXZ01 like EKPO-TXZ01, "Short Text
      MATKL like EKPO-MATKL, "Material Group
      WGBEZ like T023T-WGBEZ, "Material Group Desc"
      SUBMI like EKKO-SUBMI, "GPM
      CHARG like EKBE-CHARG, "Batch
      LIFNR like EKKO-LIFNR, "Vendor
      NAME1 like LFA1-NAME1, "Vendor Name
      RECV like mara-wesch, "Received Quantity
      REVR like mara-wesch, "Reversed Quantity
      DELV like mara-wesch, "Delivered Quantity
    end of SBAGDS .
    DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
    data Struc like BAGDS.
    data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
    data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
    INITIALIZATION.
    i = 0.
    counter = 0 .
    perform field_cat_init using gt_fieldcat[].
    FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
    data: ls_fieldcat type slis_fieldcat_alv,
             pos type i value 1.
    clear LS_FIELDCAT.
    *Column 1
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'Serial'.
    ls_fieldcat-SELTEXT_L      = 'Serial'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 2
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'EBELN'.
    ls_fieldcat-SELTEXT_L      = 'Purchase Order'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 3
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'MATNR'.
    ls_fieldcat-SELTEXT_L      = 'Material'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 4
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'TXZ01'.
    ls_fieldcat-SELTEXT_L      = 'Short Text'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 5
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'MATKL'.
    ls_fieldcat-SELTEXT_L      = 'Material Group'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 6
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'WGBEZ'.
    ls_fieldcat-SELTEXT_L      = 'Material Group Desc'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 7
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'SUBMI'.
    ls_fieldcat-SELTEXT_L      = 'GPM'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 8
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'CHARG'.
    ls_fieldcat-SELTEXT_L      = 'Batch'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 9
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'LIFNR'.
    ls_fieldcat-SELTEXT_L      = 'Vendor'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 10
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'NAME1'.
    ls_fieldcat-SELTEXT_L      = 'Vendor Name'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 11
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'RECV'.
    ls_fieldcat-SELTEXT_L      = 'Received Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 12
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'REVR'.
    ls_fieldcat-SELTEXT_L      = 'Reversed Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    *Column 13
    ls_fieldcat-col_pos           = pos.
    ls_fieldcat-fieldname        = 'DELV'.
    ls_fieldcat-SELTEXT_L      = 'Delivered Quantity'.
    ls_fieldcat-DDICTXT          = 'L'.
    append ls_fieldcat to rt_fieldcat.
    clear ls_fieldcat.
    pos = pos + 1.
    endform.
    START-OF-SELECTION.
           select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
           select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
           select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
    *         ' Buliding Structure
              Struc-EBELN = ZEKPOR-EBELN.
              Struc-SUBMI = ZEKKOR-SUBMI.
              Struc-LIFNR = ZEKKOR-LIFNR.
              Struc-Name1 = ZNAME1F.
           select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
           LOOP at ZEKPO into ZEKPOR.
               select SINGLE WGBEZ from T023T into ZWGBEZF  WHERE MATKL = ZEKPOR-MATKL .
               counter = counter + 1.
    *         ' Buliding Structure
              Struc-Serial = counter.
              Struc-MATNR = ZEKPOR-MATNR.
              Struc-TXZ01 = ZEKPOR-TXZ01.
              Struc-MATKL = ZEKPOR-MATKL.
              Struc-WGBEZ = ZWGBEZF.
    *          Calcualting Debit transactions from PO History
               select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and  EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
               LOOP AT ZEKBE INTO ZEKBER.
                   TtlS = TtlS + ZEKBER-MENGE.
               ENDLOOP.
    *          ' Buliding Structure
               Struc-CHARG = ZEKBER-CHARG.
               Struc-RECV = TtlS.
               Ttl = TtlS.
               clear TtlS.
    *         Calcualting Credit transactions from PO History
             select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and  EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
               LOOP AT ZEKBE INTO ZEKBER.
                   TtlH = TtlH + ZEKBER-MENGE.
               ENDLOOP.
    *          ' Buliding Structure
               Struc-REVR = TtlH.
    *          Calculating Total Delivered
               Ttl = Ttl - TtlH.
               clear TtlH.
    *          ' Buliding Structure
               Struc-DELV = Ttl.
               clear Ttl.
    *      Writtng ITAB
           APPEND Struc to BAGDS.
           ENDLOOP.
    *      Reading ITAB
    *       WRITE : / , 'ITAB Begin : '    .
    *       loop at  BAGDS into Struc.
    *         counter = counter + 1.
    *         write : /,'Serial : ',counter.
    *         write : / ,'PO : ',Struc-EBELN.
    *         write : / ,'Vendor : ',Struc-LIFNR.
    *         write : / ,'Vendor Name : ',Struc-NAME1.
    *         write : / ,'Material : ',Struc-MATNR.
    *         write : /,'Short Text: ',Struc-TXZ01.
    *         write : / ,'Model : ',Struc-MATKL.
    *         write : / ,'Model Desc : ',Struc-WGBEZ.
    *         write : /,'GPM : ',Struc-SUBMI.
    *         write : /,'Lot : ',Struc-CHARG.
    *         write : /,'Received : ',Struc-RECV.
    *         write : /,'Reversed : ',Struc-REVR.
    *         write : /,'Delivered : ',Struc-DELV,/,/,/.
    *       ENDLOOP.
    * Call ALV Grid Viewer
    *BREAK-POINT.
    gr_Table[] = BAGDS[].
       CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
            EXPORTING
                 I_STRUCTURE_NAME   = 'SBAGDS'
                 IT_FIELDCAT          = gt_fieldcat[]
            TABLES
                 T_OUTTAB                  = gr_Table.
    Please Advise
    Edited by: Sap Sap on Jul 27, 2009 12:18 PM
    Edited by: Sap Sap on Jul 27, 2009 12:22 PM
    Edited by: Sap Sap on Jul 27, 2009 12:22 PM

    Hi,
    The problem seems to be in your ALV grid display.
    The reason must be your field catalog.
    Just check your fieldcatalog.
    The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
    Probably you must have mistyped some field.
    Kinldy check.
    Regards,
    Ankur Parab

  • RUn time error while  saving po    Field symbol has not yet been assigned.

    Hi Experts,
    I am getting abap dump while saving PO in ME21N  plz seee the below dump  plzzzzzzzzzzzzzzzzzzzzz help me
    Runtime Errors         GETWA_NOT_ASSIGNED
    Date and Time          19.06.2009 11:24:46
    Short dump has not been completely stored (too big)
    Short text
         Field symbol has not yet been assigned.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLKKBL" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         You attempted to access an unassigned field symbol
         (data segment 106).
         This error may occur if
         - You address a typed field symbol before it has been set with
           ASSIGN
         - You address a field symbol that pointed to the line of an
           internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "GETWA_NOT_ASSIGNED" " "
        "SAPLKKBL" or "LKKBLF99"
        "GEN_FIELD_OUT2"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    em environment
    SAP-Release 700
    Application server... "gplqty"
    Network address...... "128.12.0.19"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "GPLQTY"
    Database type..... "MSSQL"
    Database name..... "GPQ"
    Database user ID.. "gpq"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Aug 4 2008 02:33:25"
      create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
      Database version. "SQL_Server_8.00 "
      Patch level. 172
      Patch text.. " "
      Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
      SAP database version. 700
      Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
       NT 6.0"
      Memory consumption
      Roll.... 16192
      EM...... 16759360
      Heap.... 0
      Page.... 237568
      MM Used. 12036016
      MM Free. 530432
    er and Transaction
      Client.............. 410
      User................ "SAP_SUPPORT"
      Language key........ "E"
      Transaction......... "ME21N "
      Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
      Program............. "SAPLKKBL"
      Screen.............. "SAPLKKBL 0500"
      Screen line......... 3
    Information on where terminated
        Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
        The main program was "RM_MEPO_GUI ".
        In the source code you have the termination point in line 2908
        of the (Include) program "LKKBLF99".
    Source Code Extract
    Line  SourceCde
    2878       else.
    2879         assign <fs11> to <field>.
    2880         gs_fc = gs_sfc11.
    2881       endif.
    2882     when 012.
    2883       if gs_out_flags-slave ne 'X'.
    2884         assign <fm12> to <field>.
    2885         gs_fc = gs_mfc12.
    2886       else.
    2887         assign <fs12> to <field>.
    2888         gs_fc = gs_sfc12.
    2889       endif.
    2890     when 013.
    2891       if gs_out_flags-slave ne 'X'.
    2892         assign <fm13> to <field>.
    2893         gs_fc = gs_mfc13.
    2894       else.
    2895         assign <fs13> to <field>.
    2896         gs_fc = gs_sfc13.
    2897       endif.
    2898     when 014.
    2899       if gs_out_flags-slave ne 'X'.

    Hi,
    this error occurs when you try to address a field-symbol before it has been assigned to a field or
    the assignment has failed.
    Use following code to remove this dump
    Assign <mara-matnr> to <fs>.
    if sy-subrc <> 0.
      Error Message.
    Endif.
    Hope it helps,
    Raj

  • RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned.

    I am on the newest patches for basically all things related to BI, and some of them are giving me trouble.  The problem I am now encountering is when I try to jump from my Purchasing Query to my Purchasing Line Items Query, I get an error, stating RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned.  Does anybody know what this means?  I haven't changed either query recently, and it was working just fine.
    Any help is appreciated.
    Thanks,
    Owen

    Hi
    Record a RSTT trace by refering to the note :  899572, and then execute the trace in RSTT.If will throw a dump and chekc where the issue is.It is difficult to say why the error has occured just from teh error "RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned."
    Regards, Hyma

  • For 2 Zfields in Web UI, BSP err: Field symbol has not yet been assigned.

    Hi,
    I've created 3 ZFields (F1, F2, F3) in EEWB. I've assigned F1 in the configuration of Component WB (available fields to displayed fields). I can see ZField F1 in the Web UI.
    But when i assign other 2 ZFields F2 & F3 in the configuration & check in Web UI, it showing the below error:
    "Field symbol has not yet been assigned."
    Anyone faced the similar issue, pls share the solution to fix this.
    tnx in adv.
    rgds,
    balu

    Hi there,
    I think the problem is with the cookie handling. Cookies are really just raw data that needs to be placed into ABAP structure. This is something like the way I would do it....
    Save Cookie
    DATA: cookie type xstring.
    EXPORT it_favourites FROM it_favourites TO DATA BUFFER cookie.
      CALL METHOD cl_bsp_server_side_cookie=>set_server_cookie
        EXPORTING
          name                  = sy-uname
          application_name      = application_name
          application_namespace = application_namespace
          username              = sy-uname
          session_id            = session_id
          data_name             = 'COOKIE_ID_43CASE2'
          data_value            = cookie
          expiry_date_rel       = 7
          expiry_time_rel       = 0.
    Retrieve cookie
      CALL METHOD cl_bsp_server_side_cookie=>get_server_cookie
        EXPORTING
          name                  = sy-uname
          application_name      = application_name
          application_namespace = application_namespace
          username              = sy-uname
          session_id            = session_id
          data_name             = 'COOKIE_ID_43CASE2'
        CHANGING
          data_value            = cookie.
      IF cookie IS NOT INITIAL.
        TRY.
            IMPORT it_favourites = it_favourites FROM DATA BUFFER cookie.
          CATCH cx_root INTO oref.
            " Error handling
        ENDTRY.
      ENDIF.
    Cheers
    Graham Robbo

  • Error While Executing Report - "Field symbol has not yet been assigned."

    Dear All,
    I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
    Based on this Cube I had developed a report.
    0MRP_CONTRL characteristic filled using 0MATERIAL master data.
    Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
    While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
    Also getting dump in tcode ST22.
    This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
    When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
    Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
    Please help.
    Regards,
    Divyesh Khambhati.

    Hello Shashank,
    Thanks for your reply.
    No material is not checked for authorization relevant.
    Is it required to make 0MATERIAL to be checked as Authorization relevant ??
    I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
    I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
    Divyesh Khambhati
    Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM

  • GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned.

    Hi Experts,
    I am facing the following dump u201CGETWA_NOT_ASSIGNED u201C, Termination occurred in the ABAP program "SAPLDSVAS_GRAPH" - in u201CSET_EXTREME_VALUES".The main program was "RDSMOP_MAIN ".
    In the source code you have the termination point in line 275 of the (Include) program "LDSVAS_GRAPHACI".
    Friends I am facing this issue while generating EWA report for R3 server only, Iu2019m able to generate EWA report for other servers like BI, CRM. But while creating EWA report for ERP server Iu2019m getting this dump.
    Certain thing I would like to highlight. Recently we did a support pack upgrade, mine is a Solman 7.0 EHP1 system. We update the support pack up to " SPS 6 ".Before the support pack upgrade it was working fine, I was able to generate the EWA report for all my servers.
    Do any body face similar kind of problem?
    Responses are highly appreciable
    Thanks & Regards
    Dusmanta

    Hi,
    Can you please debugg the same code from line 245 of include prog LDSVAS_GRAPHACI.
    do me->category_count times.       " I think the value of category count is zero.
            lv_index = sy-index + 1.
            write lv_index to lv_fieldname+15 left-justified.
            assign (lv_fieldname) to <lv_value>.
    Thanks
    Subhankar

  • Field symbol has not yet been defined-ALV Grid Display in Report

    Hi all,
              Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

    Hi,
    <li> This is problem with fieldcatalog.
    <li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
    <li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
    Thanks
    Venkat.O

  • Error Code: -17601 "Attempted to load a module for a step whose module has not yet been specified"

    I am trying to run my first Test Stand sequence, and am getting the following Error: "Error Code: -17601, Attempted to load a module for a step whose module has not yet been specified".
    I have specified the correct module under the Test Stand "Action" properties, and am pointing to the right vi. I am not sure why it is giving me this error.

    Hi Shoab,
    So when you right click on your step and select Specify Module.... The Edit LabVIEW VI dialog will appear, in the VI Pathname control is your VI and under that control appear the full path to your VI, if it contains "(No File Specified)" then thats your problem. You will need to use the file browse control to find your VI.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Field symbol has not been assigned in Reuse_alv_grid_display

    Hi Experts,
    I display my output in alv grid format using REUSE_ALU_GRID_DISPLAY, there i have one editable field , when user click on save data that data will be saved , so in user command i write code like to check changed data
        DATA : REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
          IF REF_GRID IS INITIAL.
            CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
              IMPORTING
                E_GRID = REF_GRID.
          ENDIF.
          IF NOT REF_GRID IS INITIAL.
            CALL METHOD REF_GRID->CHECK_CHANGED_DATA.
          ENDIF.
    when i execute the report i get dump with message
    field symbol has not been assigned .
    when i try in debug mode when call method ref_grid->check_changed_data , i get dump ,
    Please suggest me
    Thanks & Regards
    Krishna

    Hi siva,
    Check this thread  [ALV with Edit and Save |editable ALv and SAVE criteria;
    this will help u,
    Thanks & regards
    Kiran

  • Error during project server 2013 The property or field 'StartDate' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.

    Hi sir,
    when I have try to fetch the value of project start date and finish date and some other field value , I have recived error message like The property or field 'StartDate' has not been initialized. It has not been requested or the request has not been
    executed. It may need to be explicitly requested.
    I have used client context for project server 2013.
    I have also load and execute query.but fail to resolve it Please suggest me and provide solution.
    vijay

    Hi,    
    If you use the Include<TSource> Method in the Load method, we will retrieve only the ids of items in this query, so
    the listItems.ListItemCollectionPosition will not be initialized.
    You can use the <ViewFields> tag in CAML Query to specify the field values to return with each item instead.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Error code: 1 : 10  summary: Designtime cache has not been initialized

    I am getting this error at the time of deploying the the esb project at server.
    error code: 1 : 10
    summary: Designtime cache has not been initialized
    Please look in logs for following signs of failure. Fix them and restart. (a) Database access errors (b) ESB Bootstrap errors (c) OC4J class load errors (d) Product installation errors (e) Export ESB params and verify if host and port parameters are correct. Please contact Oracle Support if unable to fix the issue.
    Fix: -
    How I can fix this issue. If somebody know then please answer. I am waiting a postive reply for you people.

    HI,
    We also had this problem.
    But I have replaced the esb folder from my colleague's system and then I found in two files referring the system name in some configuration files, I have changed that to my system name. then it started working.
    --Khaleel                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Csom error The property or field 'LoginName' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.

    Hi sir,
    When I have get the value of project owner the error is occured
    The property or field 'LoginName' has not been initialized. It has not been requested or the request has not been executed. It may need to be explicitly requested.
    vijay

    Hi Vijay,
    The owner details are not loaded by default when you load all projects.
    You have to make sure the details of the project owner are loaded before you can access them:
    foreach (PublishedProject pubProj in projContext.Projects){
    User owner = pubProj.Owner;
    projContext.Load(owner);
    projContext.ExecuteQuery();
    Console.WriteLine(owner.LoginName);

  • Short dump - field LIKP-WAERK is uknown

    Hi,
    When compiled my adobe form which has one import parameter of type custom structure which has currency field whose reference field are declared as likp-waerk,
    I get a short dump stating Field LIKP-WAERK is uknown. At the statement in lt_params:
    dynamic call of the generated function module
      CALL FUNCTION m_fm_name
        PARAMETER-TABLE lt_params
        EXCEPTION-TABLE lt_exceptions.
    In the function module when checked in the code that dumps out,
    PERFORM %OUTPUT USING 'AMT_FROM' %WORKAREA1-AMT_FROM 'CURR' 'P' 'LIKP-WAERK' LIKP-WAERK ' '.
    I think in the ref value instead of variable LIKP-WAERK it should have been blank like ' '.
    But I do not know a way to rectify this dump.
    Really appreciate if you anyone could please help me out.
    Edited by: Bharathi M on Nov 28, 2010 8:46 AM
    Edited by: Bharathi M on Nov 28, 2010 9:23 AM

    Hi,
    May I know how this was corrected? I'm facing the same issue.
    Thanks,
    Jeff

Maybe you are looking for

  • First 'impression' of Safari 3.0 Beta in the first 5 minuites of use.

    I'm using Windows Vista Home Premium and just downloaded Safari 3.0 for Windows Public Beta (Not included Quicktime) The installation is processed smoothly. I used it 5 minuites and my first impression is nothing but BUGs BUGs BUGs. Alway Crash: 1. W

  • How to print JPG image retrieved from BLOB in a table using Forms10g

    I create a database schema and a Form to maintain JPG to the table PHOTOS. I would like to add a button to PRINT just the PHOTO_IMAGE to its maximum size from a Form. How can I do that? Is thaere any built-in Forms functions to do that? If the client

  • Size of Exported Excel file is very large

    Hi, I have a report that has around 10000 rows and 5 columns. When I export to excel, the excel file is very big, around 15MB. But If the file is opened, and saved again , the size reduces to around 13MB. Any suggestions on how to reduce the file siz

  • Problem configuring Mojarra Scales

    Hi, I am new to JSF and I am using Spring Webflow. The base application I started with has already configured Mojarra itself. Now, I want to work with Scales because I need the htmlEditor component. As in the page "https://scales.dev.java.net/" writt

  • I just downloaded elements 11 again, and the editor can't find plug ins

    I recently acquired Topaz Simplify and upon wanting to use Elements 11 as the Host I am finding that the Editor is not booting up and/or finding any plug ins.....The Organizer will run but the Editor is failing to open properly. Anybody out there wit