In terms of efficiency and expandability, how does iPlanet Portal software differ from a portal written in PHP and PERL?

In my opinion the fact that the portal uses primarily JAVA, lends itself to quite a bit of expandability. I think it will be quite difficult for a portal written in PHP (Such as PHP Nuke) to share user session and state information accross multiple machines/instances. The iPlanet portal server has been designed to accomodate this, through the use of specialised session services. The threading model in Java also lends itself to greater efficiency when executing multiple tasks, whereas a portal based on PERL, would have to start a new process everytime a service is requested, which can then become VERY resource intensive.
In terms of expandability, the fact that it is contaned inside a JAVA VM will allow you to develop and deploy alot of custom developed applications for your portal. There is also quite a good portal API for the iPlanet portal server that will allow you to tap into the Logging,Session,Profile and Authentication services provided by the portal.
Hope this helps!

Similar Messages

How does the content repository differ from the ECM plugin capability

How does the content repository differ from the ECM plugin capability suh as Documentum. What are the different use cases. Which is the best to use for managing document uploads by user for association with user's personal products/services ?

Content Repository is a standards-based, fully featured repository, included in all the editions of the Adobe Digital Enterprise Platform and Solutions. You can use it to store and access content, execute rich set of content services like search, authorization, etc. As such, it's ideally suited for all the content/document/asset-related needs of your applications. It offers the JCR API, plus access through RESTful interface and WebDAV network drive (among others). Additionally, managing content in the Content Repository makes it immediately availble for all the solutions that run of the platform.
In essence, Content Repository is your go-to place to store and manage content in the Digital Enterprise Platform/Solutions. It is well suited to cater to your use case.
The ECM Plugins (Connectors) are used if you have existing LiveCycle document services, and you have one of the ECM systems in your infrastructure used as archive. It allows you then to connect to such a 3rd-party system, and retrieve document for processing, as well as store them back for archiving.

How does the a1 serises differ from the a2107-7

How does the a1 serises differ from the a2107-7
Moderator Note; subject edited to reflect content

Hi
Welcome To Lenovo Community
The IdeaTab A1 was one of the first Android tablets from Lenovo designed for budget-conscious users and was subsequently much cheaper than most of the competition at the time of launch
The new IdeaTab A2 series targets the same budget to midrange audience, but now with two separate models (A2107 and A2109) differentiated mainly by their screen sizes.
Please refer below link for more details
http://www.notebookcheck.net/Review-Lenovo-IdeaTab-A2109A-Tablet.82834.0.html
http://www.notebookcheck.net/Review-Lenovo-Ideapad-A1-Tablet.68869.0.html
http://www.notebookcheck.net/Lenovo-announces-new-IdeaTab-S2110-A2107-and-A2109.81259.0.html
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

How does the metadata.keychain differ from the login.keychain?

I am updating my keychain access as I transfer from one hard drive to another. In looking to transfer the keychain permissions, I ran into a metadata.keychain as well as a login.keychain. I can't find any useful description of the purpose of the metadata.keychain. Hence I don't know if needs to be copied. Why is info on the metadata.keychain so elusive?
Also, I noticed I cannot post this question in a general forum for multiple versions of the OS (and I know the metadata.keychain exists in multiple versions). If there is better forum, feel free to move it. I chose this one since I am using Lion.

Hi
Welcome To Lenovo Community
The IdeaTab A1 was one of the first Android tablets from Lenovo designed for budget-conscious users and was subsequently much cheaper than most of the competition at the time of launch
The new IdeaTab A2 series targets the same budget to midrange audience, but now with two separate models (A2107 and A2109) differentiated mainly by their screen sizes.
Please refer below link for more details
http://www.notebookcheck.net/Review-Lenovo-IdeaTab-A2109A-Tablet.82834.0.html
http://www.notebookcheck.net/Review-Lenovo-Ideapad-A1-Tablet.68869.0.html
http://www.notebookcheck.net/Lenovo-announces-new-IdeaTab-S2110-A2107-and-A2109.81259.0.html
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

How does the Linux version differ from the Windows version?

I am considering the purchase of the Linux version of LabView and was
curious if anyone has compared the two platforms? For instance, are there
many feature differences? What abilities do you lose in the Linux platform?
I currently have LabView 6.1 with the datalogging and supervisory control
module. I would have to buy the whole package again for the Linux version.
The company I work for builds computerized machines for the wood working
industry and each one is equipped with a computer running Windows. I think
by having Linux running on them we would save money and have a more
configurable OS without all the extras. My only concern is if the
functionality is too limited in the Linux version. Any insight wou
ld be
appreciated.
Thanks,
-Surcher

"vg" wrote in message
news:[email protected]..
> The Datalogging and Supervisory Control Module will only work on the
> Windows OS. It was not designed for Linux.
How about the datasocket connections? Do they work the same?
-Surcher

How does low-grade encryption differ from encryption?

In Options\Warning Messages\Settings, what distinguishes low-grade encryption from just encryption? Why is low-grade the only default? I don't know much about encryption, but I want to set these messages the best way for me.

Low-grade is really low-grade (less than 128 bit) and should never be used anymore.<br />
In current Firefox versions all low-grade (SSL2 and SSL3) encryption ciphers are disabled as you can see on the<b>about:config</b> page (Filter: ssl).<br />
So leave that low-grade warning at the default.

Sorry if tis is naive. I have just bought my first iPad Retina Display. I have WiFi at home but it has taken ages for me to connect as I needed all sorts of codes, passwords, detauils etc. How does one connect to the web (Google) when one is out and a

Sorry if this is a bit naive. I have just bought my first iPad (Retina Display). I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
How does one connect to the web (Google) when one is out and about?
Thanks

haha, You're welcome
Maybe these links will be useful
ipad manual/user guide
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
ipad support page
http://www.apple.com/support/ipad/
ipad assistant
http://www.apple.com/support/ipad/assistant/

How does the system knows age or seniority is crossed for so and so... EE

Hi Experts,
In my project we have configured some Health plans based on ages and seniority,
Employee can enroll in to the plan when they reach the age or seniority,
my question is how does the system knows age or seniority is crossed for so and so... EE, where exactly we do this setups
Pleae let me know your valuable answers
Regards
Sreeni

hr_entry_date and you can use various
fm to calculate this, It reads 0019, 0041 or Hdate feature
3QP8                           Time related calculation function mod.
HR_AUPBS_SENIORITY             Calculate the whole length of service of employee
3RP3A                          Leave schem proration modules
SGPS_LS_SENIORITY_CALCULATION Function for seniority calculation for Singapore Leave Scheme
HRDO
HR_DE_PBS_SENIORITY_PERIODS
HRFPBS4AV0
HR_PSF_AV_ANC_INPUT_SENIORITY
HRF_METADATA_IT
HRF_READ_SENIORITY_IT

How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!

How does one do a two way contacts sync between an iphone and outlook? Most of the community has answered as this to be "always so", but it does not work! Changes made on outlook get done in my iPhone, but it does not work the other way around!

Close the tab the web page is loaded in (command - W).

HT1212 my niece lockup her ipod and don't remember password and/or it dont work now   there no access to setting to wipe and reformat how does one do this

How does one redo a 8GB ipod? My neice has one and lock it with a password and now password dosen't work and/or she forgot it! It give message ipod is diable! connect to Itunes! I've done that and the device doesn't showup in itunes, keep getting a message that password is needed! But there no input for that on the phone either! So I thought I would just dump and reformat and reinstall software, but I'm using windows and the device dosen't show up! Anyone!!!!! got a answer!
Thanks

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT204406 how does the iTune icon present itself onto the dock. ? And how does it play without being requested ?

how does the iTune icon present itself onto the dock. ?
And how does it play without being requested ?

1. The SCB-68 is just a terminal block; it does not measure anything. The measurement is made on the board connected to the SCB-68.
2. Computer-based data acquisistion devices and 480 V motors with solid state speed controls do not "play nice," as the kids say. The connections you are trying to make may well end up with a fried data acquisition board, fried computer, and MOST IMPORTANTLY a fried USER!
Ground loop problems may produce noisy measurements or may destroy all the low current devices (like the computer) in the system.
Signal conditioners are not only to reduce noise but also to provide safe isolation between the high voltage and high power parts of the system and the more sensitive parts.
A thermocouple is a voltage generating device. The measurement system measures that voltage (typically millivolts) and independently measures the temperature of the "cold junction" of the thermocouple. The temperature at the hot junction of the thermocouple is calculated as Temperature(TC voltage difference) - Temperature(cold junction). If currents flow through the TC wires, due to ground potential differences between the motor frame and the computer ground for example, the voltage drop from Ohm's law is added to the TC voltage and will produce temperature errors. TC wire may have significantly higher resistance than wires used for most elelctrical signals so the interfering signal may be greater than the desired signal.
Lynn

I am picking up my new ipad this morning and turning over my ipa 2 to my wife. how do i get all my info apps, etc to my new ipad and wipe pout all on my existing and then how does she log in register with my old ipad?

i am picking up my new ipad this morning and turning over my ipa 2 to my wife. how do i get all my info apps, etc to my new ipad and wipe pout all on my existing and then how does she log in register with my old ipad?

Restore your new iPad from your most recent backup of your iPad2 in iTunes when you set it up, and then set up your wife's iPad2 as new device in iTunes by clicking on 'restore' on the main summary screen.
Alternatively, you can just go to 'Settings>Reset>Erase all Contents and Settings'.

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac. Now I can't remove her e-mail address from Facebook. It was suggested to me that I try clearing temporary files from Safari but I can't find

How does one remove temporary files from Safari? A friend logged on to her Facebook account using my iMac running Mac OSX 10.7.5 and Safari 6.1.6. Now I can't remove her e-mail address from my computer. When I open Facebook her address shows in the user button. I do not have a Facebook account. It was suggested to me that I try clearing temporary files from Safari but I can't find anything that tells me how to do this. Are temporary files the same as the cache? It also was suggested that I try clearing Safari cache. How do I do that?

Check Safari/Preferences/Passwords to see if the Facebook account is there. If so, select it and remove it. If you are still having problems, Safari/Preferences/Advanced - enable the Develop menu, then go there and Empty Caches. Quit/reopen Safari and test. If that doesn't work, Safari/Reset Safari.

Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I ha

Just brought home newly purchased MacBook Pro 15"/Maverick/Retinal Display. To my astonishment, there is NO DVD slot! No one in the store told me about this missing feature. Intolerable, How does one install software? Insert CDs to copy for iTunes?Do I have to purchase an external DVD drive? Is one even available? What a crock!

I’ve owned Macs since 1990 (IICX my first), mostly desktops. Having had DVD/CD drives in all my previous laptop Macs since 2001 - (2) G4 Powerbooks, A 17” Mac Book Pro - and also inspecting a friend’s year-old Mac Book Pro which had the DVD slot - unless someone told me at purchase, I had no reason to know that the Retina display version of the 15” had NO DVD drive. ANYHOW, I fully intended to buy the non-Retina display version, because it was cheaper. Unfortunately by the time I got to the Apple store they were no longer selling the non-Retina display version; all versions were ONLY with the Retina display. And the fine distinction of a DVD vs. a non-DVD drive was not pointed out. So now I have to shell out an additional $80 bucks for an external SuperDrive.

How does Oracle AIA pull details from SOA Suite on installation?

Quite urgent help:
How does Oracle AIA pull details from SOA Suite during installation?
We're encountering an issue with installation of Oracle AIA at step 4. This when providing the SOA Server Details, and the managed server shows:
"Cannot Connect to Server" error.
However at the weblogic console, the Admin server and manage server: soa_server1 are running. Please provide us help on this.
For further details, here are the apps and versions we installed:
* Oracle Fusion Middleware 11g
* SOA suite
* Oracle AIA 11g
* Weblogic 10.3.4.0
Thanks!
-tristan
Edited by: user8089513 on May 16, 2011 4:58 AM

Hello,
Thanks for the reply!
On my end, i haven't started it yet today, it just leads me to this message when running node manager:
+<May 17, 2011 3:40:51 PM GMT+08:00> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<May 17, 2011 3:40:52 PM> <INFO> <Secure socket listener started on port 5556, host /10.234.182.26>+
May 17, 2011 3:40:52 PM weblogic.nodemanager.server.SSLListener run
INFO: Secure socket listener started on port 5556, host /10.234.182.26
Should you need to check the nodemanager.properties, here are the details:
#Fri May 13 10:56:04 GMT+08:00 2011
DomainsFile=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.domains
LogLimit=0
PropertiesVersion=10.3
DomainsDirRemoteSharingEnabled=false
#javaHome=C\:\\Oracle\\MIDDLE~1\\JROCKI~1.1-3
#JavaHome=C\:\\Oracle\\MIDDLE~1\\JROCKI~1.1-3\\jre
JavaHome=C\:\\Oracle\\MIDDLE~1\\JDK160~21\\jre
javaHome=C\:\\Oracle\\MIDDLE~1\\JDK160~21
AuthenticationEnabled=true
NodeManagerHome=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1
LogLevel=INFO
DomainsFileEnabled=true
StartScriptName=startWebLogic.cmd
ListenAddress=10.234.182.26
NativeVersionEnabled=true
ListenPort=5556
LogToStderr=true
SecureListener=true
LogCount=1
DomainRegistrationEnabled=false
StopScriptEnabled=true
QuitEnabled=false
LogAppend=true
StateCheckInterval=500
CrashRecoveryEnabled=false
StartScriptEnabled=true
LogFile=C\:\\Oracle\\MIDDLE~1\\WLSERV~1.3\\common\\NODEMA~1\\nodemanager.log
LogFormatter=weblogic.nodemanager.server.LogFormatter
ListenBacklog=50
When I check the weblogic console, i manually run the managed server using startManagedWebLogic.cmd.
Please advise. Do really need help on this.
Thanks!
-tristan

In terms of efficiency and expandability, how does iPlanet Portal software differ from a portal written in PHP and PERL?

Similar Messages

Maybe you are looking for