In the Firefox browser, when i click button in ADF page, then popup  the OAF page in iframe tag,and then when i  click the PPR bean in  OAF page, then Firefox  browser reload to ADF page. This is not the right response,browser should not reload the ADF pa

In the Firefox browser, when i click button in ADF page, then popup  the OAF page in iframe tag,and then when i  click the PPR bean in  OAF page, then Firefox  browser reload to ADF page. This is not the right response,browser should not reload the ADF page.It should stays in OAF page or goto another OAF page. and in other browser such ad IE,We get the right response.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

Similar Messages

  • As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • Big Mistake, I upgraded to OS X Mavericks this morning and now I have lost all my e-mail folders where I was saving important e-mails.  I did a mailbox rebuild and it did not bring them back.  Should not have upgraded?

    Big Mistake, I upgraded to OS X Mavericks this morning and now I have lost all my e-mail folders where I was saving important e-mails.  I did a mailbox rebuild and it did not bring them back.  Should not have upgraded?

    I do not remember what version of OS it was.  I have carbonite back up but I am not sure it backed up my e-mail. 

  • Been visiting another country. when i got home i get an unknown error has occurred on both my iphone and ipad2 when trying to install or update anything from app store

    been visiting another country. when i got home i get an unknown error has occurred on both my iphone and ipad2 when trying to install or update anything from app store

    I started getting that message on my iPad tonight when I reset it completely. I haven't been t another country. So not sure if that has anything to do with it. I haven't been able to resolve yet.

  • Is it not a myth that roles should not be assigned!

    Is it not a myth that roles should not be assigned (auto provisioned) via GRC if user ids are locked? My understanding is roles will get assigned (auto provisioned) to user ids irrespective of user id being locked or unlocked? Thanks

    Hi Raju,
    nope it doesn't. You might be able to set up a mapping for the status but I never tried that.
    Regards,
    Alessandro

  • When using Adobe Photoshop Elements, is it legal to use shapes etc. (displayed in 'Artwork and Effects') when creating a product to be sold? Thank you.

    When using Adobe Photoshop Elements, is it legal to use shapes etc. (displayed in 'Artwork and Effects') when creating a product to be sold? Thank you.

    Thank you very much for answering my question. Have a great day.

  • Hello. I have MacBook Pro. I have 30,000 photos on iPhoto which is not on the hard drive but on an external hard drive. I have purchased a 2nd external hard drive and I would like to make a copy of my iphoto library onto it. I cant get this to work.

    I have MacBook Pro. I have my iPhoto library on external hard drive only. It has 30,000 photos on it. I have bought a 2nd external hard drive and would like to copy my iPhoto library onto it as a back up. I tried plugging both in and dragging the iPhoto library into the 2nd external harddrive. It looked as though it was working as it said 20 hours, however I then got a message box saying FiNader could not complete the task due to incompatible files. How do I do this please.

    lllaass wrote:
    Yes, you should format the HD.
    A Mac can natively write to a NTSF drive and that is what most drives com formatted with.
    You should use the Mac journaled format.
    Once again you are posting incorrect information
    Until we know what format the drive is it is impossible to state that it must be formatted - that is just a guess
    And a Mac can not Natively write to an NTSF drive - it can natively read it but can not write to it with special software
    And since formatting a drive erases it it is critical to tell users not to format until they have a positively known good backup
    The TOU for these forum state that you should test your answers prior to posting them  --  you obviously are not doing that and you advice is endangering users photos - please only post tested answers
    LN

  • Firefox 14 crashes on start up, in safe mode, trying to create new profile, after complete removal and reinstall, when run under different user

    AdapterDeviceID: 0x2a02
    AdapterVendorID: 0x8086
    Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
    BuildID: 20120713134347
    CrashTime: 1342625511
    EMCheckCompatibility: true
    Email: (email removed)
    FramePoisonBase: 7ffffffff0dea000
    FramePoisonSize: 4096
    InstallTime: 1342622791
    Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 1909
    StartupTime: 1342625464
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 14.0.1
    This report also contains technical information about the state of the application when it crashed.
    Deleted all of these and reinstalled
    /Users/<user_acct>/Library/Application Support/Firefox/
    /Users/<user_acct>/Library/Caches/Firefox/
    /Users/<user_acct>/Library/Preferences/org.mozilla.firefox.plist
    I have tried rebooting, running Disk Utility and repaired permissions, and checked I have admin privileges.
    I have Reset Launch Services in Snow Leopard.
    I have created a test account
    System Preferences > Users & Groups create a "Test Account"
    then tried launching FF from there = crash
    I have installed FF 13.0.1
    AdapterDeviceID: 0x2a02
    AdapterVendorID: 0x8086
    Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:13.0.1
    BuildID: 20120614114901
    CrashTime: 1342642579
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 7ffffffff0dea000
    FramePoisonSize: 4096
    InstallTime: 1342642540
    Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 26
    StartupTime: 1342642569
    Theme: classic/1.0
    Throttleable: 1
    URL: http://www.mozilla.org/en-US/firefox/13.0.1/firstrun/
    Vendor: Mozilla
    Version: 13.0.1
    I have installed version 12 and
    AdapterDeviceID: 0x2a02
    AdapterVendorID: 0x8086
    Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:12.0
    BuildID: 20120420145725
    CrashTime: 1342643047
    EMCheckCompatibility: true
    FramePoisonBase: 7ffffffff0dea000
    FramePoisonSize: 4096
    InstallTime: 1342643035
    Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    StartupTime: 1342643035
    Theme: classic/1.0
    Throttleable: 1
    URL: http://www.mozilla.org/en-US/firefox/12.0/firstrun/
    Vendor: Mozilla
    Version: 12.0
    no crash ids since this is version 3.6, the only version that doesn't crash, and I have to use Firefox for work stuff.
    I have submitted over a hundred crash reports and included my email, but no one has ever contacted me with any help. This has been going on for weeks. I have been forced to use an outdated version of FF because no one has bother to get back to me. I would be happy to update to 14 and start the crash cycle again if someone wants to give me some suggestions I haven't tried already.
    BTW, no font conflicts or RAM problems, (someone else's issue)

    Maybe you did't understand my previous statement. There are no crashes in FF 3.6, There is no previous evidence FF 14 was ever here, I completely uninstalled all trace of Firefox, no app data, no preferences, no cache. I will upgrade to FF14 so I can send IDs,
    so here ya go.
    Crash ID: bp-fa9da320-92dc-47f7-afff-33e702120718
    AdapterDeviceID: 0x2a02
    AdapterVendorID: 0x8086
    Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
    BuildID: 20120713134347
    CrashTime: 1342655269
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 7ffffffff0dea000
    FramePoisonSize: 4096
    InstallTime: 1342655256
    Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    StartupTime: 1342655256
    Theme: classic/1.0
    Throttleable: 1
    URL: http://www.mozilla.org/en-US/firefox/14.0.1/whatsnew/?oldversion=rv:1.9.2.13
    Vendor: Mozilla
    Version: 14.0.1
    This report also contains technical information about the state of the application when it crashed.

  • Want to include ?xml tag and  schema when creating XML

    My database table that need to be generated in to XML are large and therefore I must use OracleXMLQuery.getXMLSAX . The output is missing the <?xml version="1.0" ?> tag. How do I get it? I am on 9i but have imported the .jar containing oracle/xml/parser/v2/XMLSAXSerializer from 10g XDK.
    Also, I want the schema to be written next, before the actual XML table values.
    I know that a command line parameter exists, which works for small XML files:
    java oraclexml getxml -user "scott/tiger" -withDTD "select ....
    How do I get the equivalent of '"-withDTD" when using
         OracleXMLQuery qry = new OracleXMLQuery(conn, "select * from "+table_name );
         qry.getXMLSAX(myStream);
         myStream.flush();
    Thank you,
    Elaine

    No. Actually, I can get the <?xml tag and DTD if my select statement contains 'where rownum=0', as the resultset is small which lets me use getXMLMetaData() .
    I write it to one output file, then do another OracleXMLQuery, repeating the select statement without the where clause, and run that through getXMLSAX to get the detail.
    Next, I need to scrub the data of special characters acceptable in the database but which cause problems to a browser or XML validator. (e.g. accented characters).
    Finally, I will concatente the two files.
    Is there a simpler way to do this?
    Thanks,
    Elaine

  • Itunes is not installing it keeps on saying that the service Apple mobile device has failed to start and I need to verify that I have Authorization. It then has 3 options, Retry, Ignore, or Abort, and every time I click retry or ignore nothing happens.

    Like I said every time I try to install Itunes It then has 3 options, Retry, Ignore, or Abort. Any ideas on what I have to do to get it to work?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

    Hello,
    I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
    I need a easier and manual way to eject the DVD. Where is apple's help?
    Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
    Thanks

    Thanks for asking, actually I just found a trick on a website.
    It siad that restart MBP while holding eject button, I did it and DVD came out right away.
    I hope that this works out for everyone.
    But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
    Thanks anyway dear.

  • From the UK but not there right now - how do I change the region so it lets me buy the plans?

    Currently on holiday in Barbados, but I live and study in the UK, and intend to pay from my British bank account. I need to download the photoshop and lightroom plan before going back to university to get started on some things, but it won't let me because it is 'not available in your region (Barbados)'. I have changed the region option at the bottom to the UK, but it doesn't make a difference. How do I tell it I'm from the UK? If I purchase it by phone will that work?

    Hi there
    If you are normally resident in the UK you need to set up your Adobe ID with UK as the country.  I've made a change in our system so please go ahead and create a new Adobe ID with UK as the country using the same email address.  You should then be able to sign up.
    Hope you're having a lovely holiday - we're not jealous at all!
    Kind regards
    Bev

  • UCCX 8.0 - Will not allow user response while user is hearing the MOH program

                       Is it possible within a UCCX script, to allow a user to opt out (i.e. press 1 to go to the operator, 2 for vm..etc) during the queue delay of 30 seconds within a script.  It is set to allow interruptible.

    I would create a single wav file with both music on hold and your prompts in. Say 30 seconds of music followed by "all of our agents are busy. Press 1 for the operator, press 2 for voicemail"
    Audacity works well as a free audio editor for G711.
    Play your wav file in the prompt tab of the menu step.
    I would de-queue the call after it has been transferred. That way your caller will stay in the queue if the transfer fails.
    Calls that transfer away from the queue will be marked as de-queued and will show up in the supervisor screen and historical reports.
    Please rate helpful posts
    Graham

  • Why are my webpages not looking right or my personas not working as they were?

    I opened up my browser yesterday and no matter where I go on the web, the pages don't look right. The graphics are off. I can't even see my yahoo mail. It loads, but I see no words or graphics. My Personas is actually rotating, but all I get visually is a color, no graphics at all. I have tried uninstalling and reinstalling twice to no avail. I'm not sure what to do now. I can use Explorer without any graphics issues, but I really like Firefox much better and would like to get this issue resolved.

    In FCE make sure nothing is selected in the timeline before exporting
    In the Chapter Marker submenu do NOT erase the <Chapter> slug; it doesn't show up in the chapter title but it must be there
    When exporting from FCE try exporting as DVD Studio Pro markers (if it gives you that option) just for a change
    In iDVD I believe there is a Preference setting to make sure it recognizes chapter markers; check for that

  • Urgent!!! Forms not work on web browser(OAS 10g,Solaris 10 x86).

    Problem discribe:
    1.environment:
    (1)Network: only local network.
    (2)Platforms
    All platforms we use are Solaris 10 for X86.
    (2.1)Server: (intel) Solaris 10 for X86
    Oracle Application Server Forms Services 10.1.2.0.2
    (2.2)Client: Mozolla web browser on (intel) Solaris 10 for X86 .
    Mozolla web browser information:
    (2.2.1)[menu]-[Help]-[About web browser]display:
    Welcome to Mozilla 1.7 for Sun Java(TM) Desktop System
    Mozilla/5.0 (X11; U; SunOS i86pc; zh-CN; rv:1.7) Gecko/20070606
    (2.2.2)[menu]-[Help]-[About Plug-in]display:
    Java(TM) Plug-in 1.5.0_12-b04
    file name： libjavaplugin_oji.so
    Java(TM) Plug-in 1.5.0_12
    MIME type
    application/x-java-vm Java
    application/x-java-applet Java
    application/x-java-applet;version=1.1 Java
    application/x-java-applet;version=1.1.1 Java
    application/x-java-applet;version=1.1.2 Java
    application/x-java-applet;version=1.1.3 Java
    application/x-java-applet;version=1.2 Java
    application/x-java-applet;version=1.2.1 Java
    application/x-java-applet;version=1.2.2 Java
    application/x-java-applet;version=1.3 Java
    application/x-java-applet;version=1.3.1 Java
    application/x-java-applet;version=1.4 Java
    application/x-java-applet;version=1.4.1 Java
    application/x-java-applet;version=1.4.2 Java
    application/x-java-applet;version=1.5 Java
    application/x-java-applet;jpi-version=1.5.0_12 Java
    application/x-java-bean Java
    application/x-java-bean;version=1.1 Java
    application/x-java-bean;version=1.1.1 Java
    application/x-java-bean;version=1.1.2 Java
    application/x-java-bean;version=1.1.3 Java
    application/x-java-bean;version=1.2 Java
    application/x-java-bean;version=1.2.1 Java
    application/x-java-bean;version=1.2.2 Java
    application/x-java-bean;version=1.3 Java
    application/x-java-bean;version=1.3.1 Java
    application/x-java-bean;version=1.4 Java
    application/x-java-bean;version=1.4.1 Java
    application/x-java-bean;version=1.4.2 Java
    application/x-java-bean;version=1.5 Java
    application/x-java-bean;jpi-version=1.5.0_12 Java
    2.Install Config:
    (2.1)formsweb.cfg
    after install,
    /export/home/ias/OraHome_2/forms/server/formsweb.cfg
    include a section :
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    (2.2)run oracle test form and my forms
    http://s216:7777/forms/frmservlet?form=test&userid=scott/tiger@orcl
    (Oracle simple test demo form)
    or
    tttp://s216:7777/forms/frmservlet?form=myform&userid=scott/tiger@orcl
    (2.3)browser dialogue window display:
    [title:Default Plugin]
    This page contains information of a type (application/x-java-applet;jpi-version=1.4.2_06)that can only be viewed with the appropriate Plug-in.
    Click OK to download Plugin.
    when I Click Ok ,display warning :
    File not found:www.sun.com, check filename ,try later.
    (2.4)change formsweb.cfg
    /export/home/ias/OraHome_2/forms/server/formsweb.cfg
    change:
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    to:
    jpi_mimetype=application/x-java-applet;
    (2.5)run again oracle test form and my forms
    http://s216:7777/forms/frmservlet?form=test&userid=scott/tiger@orcl
    (Oracle simple test demo form)
    or
    http://s216:7777/forms/frmservlet?form=myform&userid=scott/tiger@orcl
    (2.6)Problem:
    myform and test(Oracle simple test demo form) can run and display,
    but all buttons(when click) not work(no response);
    all meuns not work...........
    How to Solve this problem?
    thanks in advance.

    The currently supported versions with patches installed are as follows:
    <li>10.1.2.3 (10.1.2.0.2 + patch 5983622)
    <li>11.1.1.4 (11.1.1.2 or 11.1.1.3 + patch 11060983 : this also requires WLS 10.3.4)
    Fusion Middleware (FMw) 11 downloads are available from here:
    http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html
    Patches are only available to customers with access to MyOracleSupport (http://support.oracle.com)
    For Forms/Reports users, look for the FMw download titled "Portal, Forms, Reports and Discoverer". The distribution includes all that is necessary to design and deploy your applications. Note that WebLogic Server is also required and is a separate download (from the same page). Be sure to carefully review the installation instructions before attempting the process. It may also be helpful to review MyOracleSupport note 1073776.1.

Maybe you are looking for