In the Flat file generated after Content Conversion, In NFS AL11 Directries Not able to See complete file

Hi All,
My scenario is Proxy to File  scenario.
I used content conversion for generating flatfile in receiver side.
In FCC i used fieldFixed Lengths, The flatfile is generated. I gave the Target Directory as AL11 directory(NFS).
In my scenario length of Header is 622 characters.
But am getting the file Upto 512 characters. After That I am not getting any fields in the Header, Remaining fields are cut.
Same I checked with SFTP server with same Content Conversion.It is working good  and I am getting complete Header with 622 characters.
Can you please suggest what should I do to get the 622 character in NFS, It is accepting only 512 characters in NFS.
Reagrds,
Satish

Satish,
In addition to Amit,
AL11 transaction is used to display all the SAP Directories.When you double click on a directory, you will able to see all the files in the directories. But you can not view the complete content of the file from AL11 as there are some restrcitions in it. Even if you download the file from AL11 itself, the actual file won't be downloaded and you will see the file name along with the path inside the downloaded file as same as you can see it in Al11. So if you need the complete and actual file, you need to download the file from the OS level. You can take help from your basis team to download the file.
Thanks,
A.B

Similar Messages

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • WDTV not able to see media Files from Time Capsule

    Hi There,
    Here is my Setup based on previous Discussion in forum.
    I have 2013 Airport Time Capsule with below config
         Under Base Station Tab
         Base Station Name  - LOPPY
         It has password too -  ********
         Under Disk Tab
         Partition name - YOLOO
         Checked - Enable File Sharing
        Secured Shared disk : - With Accounts
        Account name - wdtv
        Account passwd - ****
    Now i am able to browse shared folder under win 7 .. Window > run > \\192.168.1.XXX. .. It asks my time machine user name & passwd and i use wdtv .. i can see 2 folder .. 1st - YOLOO. & 2nd wdtv.
    I put few media files in both folder.
    Now i have Wdtv live (Gen3) with latest Firmware.
    I go to Video > Network share > Window Shares > LOPPY (My Time Capsule)
       it has asked username password . i supplied wdtv/****
    And i see famous error - No Media .. There is no media available for playback.
    While i have kept media in both folder.
    Please advice how to browse files inside Time capsule drive.

    Ok got it ..
    In WDTV > Setup > network Setup > Turn on Mac Shares
    Now .. Video > Network shares > Mac shares > You will be able to see Time Capsule
    Enter passwd.. was able to see all folders

  • Not able to see output file

    Hi All,
    this is regarding oracle apps, whenever i submit the concurrent program and tries to see the output, output tries to open in new window and closed automatically.
    not able to view the output, need to go at UNIX Box and then from there i can see output.
    i am using
    internet explorer 8.0
    R12 instance.
    Kindly let me know if you need any other information.

    Hi;
    Did you try from different machine and different OS&Browser?
    Please see below and check your settings
    Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
    Regard
    Helios

  • Converted VOB file to mpeg with Freemake Video Converter and still not able to load same file in Premiere CS6

    I have this project where I needed to change the audio part from a dvd so first tried to load VOB file but Adobe Premiere did not support VOB file so then used Freemake Video Convert tool to convert in to mpeg file so that I can import in premiere timeline. Still no success so I guess its not supported either.

    Maybe you are missing some codec. CS6 does support mpeg.
    Features and Sequence Presets missing - sequence could not be opened 

  • Ipod as hard disk - Why am I not able to see the whole file?

    I'm using my 80 gig 5th gen ipod as a hard disk for the first time. I've dragged a 32 KB text file to the ipod. When I scroll though the file all is great...but I'm not able to see the whole file? It's like I get one page and that's all. Any ideas to help me?

    Do you mean the Notes function? If so, the file size per note is, I believe, 4k. Therefore, you'd need to break up a 32k file into several parts or it will be truncated.

  • I'm not able to open PDF files in Adobe Reader XI.

    I recently updated to Adobe Reader XI and now I can't open any of my PDF documents or PDF e-mail attachments.  When I click on a document I now get a window that asks if I want to allow this file to open.  I click yes and get a monstrousity the likes I've never seen.  It blacks out my screen for a couple seconds and then I get a mixture of my desktop, task bar, and a window wanting to know if I want to open this with Protected Mode disabled.  It only fills 3/4 of the screen, the items all all blown-up in size, and are distorted.  In playing with this I have gotten notes that I have an "Incompatable Application" and "Acrobat failed to connect to a DDS Server".  On occasion I will get an Adobe Reader screen that is completely greyed out with no content in it and after a couple of seconds it goes off.  Other times I got the window about Protected Mode and I've clicked on to disable it but that doesn't work either.  I removed Adobe Reader XI and re-installed Adobe Reader X and I still have the same problem which I did not have before.  I 'm running Windows 7 Professional and have McAfee anti-virus, which I have disbled on one occasion during download and that I still had the same problem.  I went to program files to find the End User License Agreement and try to see if I needed to click on 'Accept" but it tells me the file does not exist.  I even tried using System Restore to take me back to before I did the upgrade to Adobe Reader XI and I still have this problem.  I'm at the end of my knowledge level and because these files are needed in my business I'm only able to operate at about 50%. 

    From: Test Screen Name [email protected]
    Sent: Sunday, August 04, 2013 11:32 AM
    To: gunner0490
    Subject: I'm not able to open PDF files in Adobe Reader XI.
    Re: I'm not able to open PDF files in Adobe Reader XI.
    created by Test Screen Name <http://forums.adobe.com/people/TestScreenName>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

  • After registering SAPCCMSR agent not able to see J2ee nodes in rz20

    Hi,
    After registering SAPCCMSR agent on J2ee instance not able to see J2ee nodes in rz20. The ccms_connetor file has the
    following error
    Feb 26, 2012 8:43:44 AM  ...y.monitor.mapping.ccms.Selfmonitoring [SAPEngine_System_Thread[impl:5]_65] Error: Couldn't create self monitoring (java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentException: Method
    name is empty.)).
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentEx
    ception: Method name is empty.)
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentEx
    ception: Method name is empty.)
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</Kernel>: com.sap.engine.library.monitor.mapping.ccms.CcmsConnectorException: /Kernel can't be created due to missing parent node(s).
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: Could not read host name (com.sap.mona.api.JMonException: No instance info available.)
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</>: com.sap.mona.api.JMonException: java.lang.RuntimeException: Update on node failed (java.lang.IllegalArgumentException: Method name is empty.)
    Feb 26, 2012 8:43:44 AM  ...ne.library.monitor.mapping.ccms.Trace [SAPEngine_System_Thread[impl:5]_65] Error: RegisterNode</Services>: com.sap.engine.library.monitor.mapping.ccms.CcmsConnectorException: /Services can't be created due to missing parent node(s).
    Can some one help me on this.
    Thanks

    Hello Kranthi,
    I would suggest you to cross check the steps you have performed to register sapccmsr agent with the following help links and update us.
    http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/content.htm
    Good Luck.
    Thanks,
    Siva Kumar

  • Not able to see the Service Desk Message in "Solution_Manager"

    Hi Gurus,
    Can anyone help me solving my problem,
    We are using Solution Manager 4.0, and want to implement service desk for our systems. I have configured the solution manager service desk and we are able to rise the message from satellite system to solution manager, but i am not able to see those messages in "solution_manager" transaction under service desk in solman, but those messages are reflecting in transaction code "dnotifwl" under "No Processer assigned" option of Personal selection>Notifications Tab.
    Pease guide me to resolve the problem.
    Thanks,
    Krishna.J

    Hi Nico Effenberger ,
    Thanks for ur reply,
    1.have not copied slfn to zslf but modified the entries of slf1 and using directly. When i try to copy either it is copying only the entries or saying Entry zslf does not exists in DNOC_TYPE_NOTIF.
    2. I am having full authorisation sap_all, and sap_new for my system
    3. yes i have created a slfn based on this slf1 messages.
    It will be very helpfull if you could send me any doc related to solman service desk configuration you have done.
    thanks & regards
    Krishna Joish

  • File adapter modules : Access to file data before content conversion

    I have a file sender channel for which content conversion in applied. The incoming file has data in comma separated values format.
    e.g.
    102366,Amol Joshi,DEPT1
    107752,XYZ PQR,DEPT2
    I want to access the the actual data in the file before content conversion takes place. Is it possible to access this data inside the adaper module? I tried creating an adapter module and put it before CallSAPAdapter,it still gets the XML after content conversion as the input data to the module.
    Any pointers?

    Hi Amol,
    I dont know if it is the right approach.
    But if u r not able to meet ur requirement u can do one work around.
    Use Message Transformation Bean to convert it once again in to CSV (flat file structure) and then proceed with ur module.
    There should be a better way than this.
    Hope we could find a better solution in the forum.
    Regards,
    Sudharshan

  • File Adapter with Content Conversion

    Hi -
    I am trying to convert a Flat file which has data as
    firstnamelastnamecompanyName
    Now i have created a message type which has a root name as Contact and its children are FirstName,LastName,Company.
    And in the configurator i have created a file adapter with the content conversion, but being very new to XI i have never used a file adapter with content conversion.  This is what i have in my Content Conversion Parameters.Please correct my code.
    Document Name      ::   MT_Contact
    Document Namespace ::   http://venkat
    Document Offset    :: <i>i did not enter anything here</i>
    Recordset Name     ::   RootNode(i gave this name just like that,,, Should it be something from the IR??
    Recordset NameSpace:: <i>i did not enter anything here</i>
    Recordset Structure::   Contact (this is the name in my IR
    Recordset Sequence ::  Ascending
    Recordsets per Message :: Contact,* (Can someone explain what should be given here)
    Then in the bottom in the name value pairs i have given
    Contact.fieldNames   =   FirstName,LastName,Company
    Contact.fieldSeparator = #
    When i am using the above configuration the error i am getting in RWB is Error: Conversion initialization failed: Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
    Format error in 'xml.recordset' argument: incomplete structure (name,number) pairInvalid 'xml.recordsetsPerMessage' value 'Contact,*' found
    I am very new to XI and i am unable to understand what exactly each field means in the file adapter when the content coversion is used. Can someone take the pain of explaining them.
    Thank you
    Venkat

    Hi,
    Use the following to create an XML strucutre like this,
    <MT_CONTACT>
    <CONTACT>
    <FirstName> </FirstName>
    <LastName> </LastName>
    <CompanyName> </CompanyName>
    </CONTACT>
    <MT_CONTACT>
    DocumentName : MT_TEST
    DocumentNamespace : Yournamespace
    RecordserName : record
    RecordsetStructure : CONTACT,1
    In the table,
    ignoreRecordsetName  : true
    CONTACT.fieldNames : FirstName,LastName,CompanyName
    CONTACT.fieldSeparator : #
    Go through the links suggested by moorthy and also these blogs to understand content conversion better,
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
    /people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
    /people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
    Regards,
    Bhavesh

  • File sender content conversion 0..unbounded does not pull file

    i am trying to map a flat file using content conversion to this xml structure:
    <Header>
    <Field_ID/>
    <Filler/>
    <Record_type/>
    <File_name/>
    <File_date/>
    <File_time/>
    <Heb_code/>
    <Claim_no/>
    <Cont_no/>
    <Remark/>
    </Header>
    <Claim_Header>
    <Field_ID/>
    <Filler/>
    <Record_type/>
    <Vendor_code/>
    <Garage_no/>
    <Data_code/>
    <Year/>
    <Job_no/>
    <Cont_no/>
    <License_no/>
    <ODO_meter/>
    <Claim_type/>
    <VIN_code/>
    <Claim_open_date/>
    <Claim_fix_date/>
    <N_code/>
    <C_code/>
    <Ejob1/>
    <Ejob2/>
    <Page_no/>
    <Pre_conf_date/>
    <Pre_conf_no/>
    <Part_buy_date/>
    <KM_prev_fix/>
    <Bill_prev_fix/>
    <Material_fault/>
    <Damage_whole/>
    <Damage_code/>
    <Job_amount/>
    <Towing_amount/>
    <Parts_amount/>
    <Hour_rate/>
    <Cont_mark/>
    </Claim_Header>
    <job_row>
    <Field_ID/>
    <Filler/>
    <Record_type/>
    <Vendor_code/>
    <Garage_no/>
    <Data_code/>
    <Year/>
    <Job_no/>
    <Cont_no/>
    <page_no/>
    <line_no/>
    <shaaton_code/>
    <job_finish_code/>
    <amount/>
    <job_time/>
    <row_value/>
    <color_code/>
    </job_row>
    <part_row>
    <Field_ID/>
    <Filler/>
    <Record_type/>
    <Vendor_code/>
    <Garage_no/>
    <Data_code/>
    <Year/>
    <Job_no/>
    <Cont_no/>
    <page_no/>
    <line_no/>
    <material_code/>
    <amount/>
    <unit_price/>
    <row_value/>
    </part_row>
    <remark>
    <Field_ID/>
    <Filler/>
    <Record_type/>
    <Vendor_code/>
    <Garage_no/>
    <Data_code/>
    <Year/>
    <Job_no/>
    <Cont_no/>
    <page_no/>
    <line_no/>
    <remark/>
    </remark>
    <footer>
    <Field_ID/>
    <Filler/>
    <Record_type/>
    <File_name/>
    <File_Record_no/>
    <Claim_no/>
    <Cont_no/>
    <Remark/>
    </footer>
    job_row, part_row and remark are records that occur 0..unbounded.
    when i write in recordset structure: Header,1,Claim_Header,1,Job_Row,1,Part_Row,1,Remark,1,Footer,1
    and put file with one record each, the file is pulled, but when i change recordset structure to:
    Header,1,Claim_Header,1,Job_Row,* ,Part_Row,* ,Remark,*,Footer,1
    the file is not pulled.
    can anyone tell me what i'm doing wrong?
    thanx
    Tomer

    Hi,
    Refer this links for FCC.
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
    File Receiver with Content Conversion
    Content Conversion (Pattern/Random content in input file)
    NAB the TAB (File Adapter)
    Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
    Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
    How to send a flat file with various field lengths and variable substructures to XI 3.0
    Content Conversion (Pattern/Random content in input file)
    NAB the TAB (File Adapter)
    File Content Conversion for Unequal Number of Columns
    Content Conversion ( The Key Field Problem )
    The specified item was not found.
    File Receiver with Content Conversion
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Regards,
    Phani

  • Mapping issue after Content Conversion in PI 7.1

    Hi Experts
    I am working on a File (Fixed format) to proxy , Data is getting converted in the File Content and conversion and passing to mapping as xml data , But the when the mapping happens no values are being returned on the  target side
    When I load the data (xml ) file from sxmb_moni on the sender side all nodes  shows in red color though file content happened without issues
    please provide the inputs how to map with the values
    Thanks
    PR

    A couple of checkpoints for you:
    1. When you load the XML from SXMB_MONI in the test tab of message mapping it turns red..this means the constructed XML (from CC content conversion) doesnt match the one (XSD) defined in your ESR/IR. In this case you have to check again thoroughly the file content conversion fields values/field length in the sender Communication chaneel.
    2. Once you rectify the error above then you can test the mapping in ESR message mapping.

  • File sender with content conversion and ignoreRecordsetName

    Him,
    I have an scenario with a compressed file sender with content conversion.
    In my sender cc i have:
    1     AF_Modules/PayloadZipBean     Local Enterprise Bean     unzip
    2     AF_Modules/MessageTransformBean     Local Enterprise Bean     transform
    3     CallSapAdapter     Local Enterprise Bean     2
    In module configuration, I have also added:
    xml.ignoreRecordsetName  --> true
    But RecordsetName is not removed from XML
    Why?
    thanks, in advance
    Carme

    Hi,
    No need to enter anything in module configuration. Just specify following Name-Value pair in the table provided on the Content Conversion tab of your file adapter.
    Add a row with Name = ignoreRecordsetName and Value = true (Both case-sensitive)
    For details, see [this link|http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm].
    [some more here|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/]
    Regards,
    Riyaz

  • Not able to see the content of opened files (.jpg or .psd) in Photoshop CS6

    I recently downloaded Adobe Design and Web Premium CS6.  I am not able to see the content of any of the file I open (.psd or .jpg).  I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window.  I am relatively new to this so might be missing on some option that needs to be turned on or something. 
    I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
    Any suggesstion/help is greatly appreciated.

    This is going to be the weak point:
    Intel(R) HD Graphics card
    While the Intel HD chip is fine for general computer work, it is weak for programs, like Photoshop and Adobe Premiere. The driver support is usually very bad, as well. If Lenovo does not have updated drivers, that work better, about the only choice that one has with a laptop is to turn OFF graphics accleration, and wait for a new driver. That will probably be very slow in coming.
    Good luck,
    Hunt
    PS - Noel's link will list what you are missing.

Maybe you are looking for