In the info bar at the bottom of the iphoto window, why is the number of items different from the total
In the info bar at the bottom of the iphoto screen, why is the number of items different from the total?
What version of iPhoto and system are you running? What mode are you in, i.e. Events, Photos?
If it's the Photos mode the number at the bottom will represent the number of photos displayed in that mode or the number of photos selected in that mode. The number will match the number next to the photos mode only when there are no photos in that mode that are selected.
If you click on the Events icon and then back on the photos icon the numbers should match.
OT
Similar Messages
-
while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.
The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
Why does apple allow apps in the App Store hijack your Internet when certain websites? Why doesn't apple remove their products from the App Store?.
Apple saw it as their responsibility since the redirection took me to the App Store. They assisted me in stopping the redirection which is occurring on many peoples iPhones. It's a have java script problem that adking is using to get you to buy their games. The websites work normal and then all of the sudden the website is taken over by adking.com. You can no longer use the website as it immediately takes you to the App Store without ever showing a popup to cancel the redirection. They were very helpful fixing the problem should others experiencing this specifically with adking.com.
No need to get defensive. I'm not the only one experiencing the problem Apple said. -
why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?
Click here and follow the instructions.
(71175) -
How to have a JComboBox display an item different from the one selected
Hello,
I have a JTable (single column). I have set this column cell editor to be a JComboBox...
JComboBox stdComboBox = new JComboBox();
TableColumn column_zero = stdTablewCombo.getColumnModel().getColumn(0);
column_zero.setCellEditor( new DefaultCellEditor(stdComboBox) );I have added a lovString array say {"A", "B", "C") to this stdComboBox. However, when the user selects a value from this list, I need to display a value from another lovString array say {"1", "2", "3"}. So if the user selects A then 1 needs to be displayed.
I have a TableModelListener on this table that is getting me the correct selected index for any of the JComboBoxes on any of the rows. But I am little lost on how to display the value from the 2nd list.
Thanks.Yes...but do I do that in the TableModelListener ?
This is what I've tried in the TableModelListener:
public void tableChanged(TableModelEvent e)
System.out.println(e.getSource());
if(e.getType() == TableModelEvent.UPDATE)
TableModel model = stdTablewCombo.getModel();
int row = e.getFirstRow();
this.cellValue = ((String)model.getValueAt(row, 0));
if (cellValue != null)
this.selectedIndex = this.stdComboBox.getSelectedIndex();
System.out.println("Selected Index:" + this.selectedIndex);
if (this.selectedIndex >= 0)
String valueToSet = this.lovStringB[this.selectedIndex];
model.setValueAt(valueToSet, row, 0);
else
System.out.println("Value in cell is not from List");
}It returns the selectedIndex value allright.
It sets the value of valueToSet string allright.
it also does the model.setValueAt allright....but this triggers a tableChanged event and it goes back up - this is also fine. However, when it now comes back to the this.selectedIndex = , this again returns the index of the original selection and not a -1 (for values not in the ComboBox list). This makes it go into an infinite loop and gives me a StackOverflowError.
Edited by: 799076 on Oct 10, 2010 9:41 AM
Edited by: 799076 on Oct 10, 2010 9:49 AM -
This error happens when I plug in my iPad and my iPod. The computer is authorised and I never have used a different apple ID. Tried renetering apple ID says computer is authorised. It all worked before and now won't sync. I tried to add an audiobook and it won't let me do that either. Everything plays on the computer. Did repair permissions. A new problem - any help would be appreciated
Click here and follow the instructions.
(79907) -
Balance of line item different from the figure of open item
Hi
User has posted the document by USD currency(f-02). The balance of line item display in FBL3n it is showing 1985202 while the figure in open item(f-06) it is showing 1990323.60.
What will be cause of error?
RegardsPlease check whether the exchange rates are different for the clearing date and the invoice posting date.
Regards,
Naveen -
Hello
We are in the process of evaluating the Cisco ISE VMWare appliance with a view to replace our existing FreeRADIUS installation as authentication provider for our wireless network and VPN service. As a part of this we are hoping to migrate our user authentication to Microsoft Active Directory - we have previously authenticated against a different identity store (not MS AD). Because of this legacy our Windows domain is not the same as our RADIUS realm name - the Windows domain is "win.mydomain" whereas we wish to allow users to authenticate using "username@mydomain" or even "[email protected]" as they are doing today. We are experiencing an issue where authentication requests with the format "[email protected]" will be forwarded to the Windows AD whereas authentication requests with the format "username@mydomain" will fail with the log message "User not found in Active Directory". We do not know if the ISE itself is validating the username and triggering this error, or if the error originates from AD. We suspect the that the ISE is not even asking AD because "win.mydomain" is the domain configured in "Active Directory" in "External Identity Sources".
Authentication requests against the AD without a realm are successful (that is, using only "username"). With this in mind we located a post on the Cisco support forums that described a process of proxying the request back to the ISE and strip the realm information, but this was specific for the ACS platform. We have attempted to implement this solution but it is still not working as we would have hoped, and we are not entirely certain where the fault might lie. We are currently using PEAP with MSCHAPv2 for authentication in our WLAN where the main problem is. We suspect that the "proxy-to-self" with realm stripping is an issue with PEAP.
Is there a supported method of achieving our goal, or should we abandon the ISE platform as our scenario is simply not supported?Seems like your issue maybe related to DNS, when ISE receives the format [email protected], the dns request is failing. However, there is a setting for alternate UPN Suffixes that can be configured to include domain.com and student.domain.com.
Here is a windows article that should fix this for you. Once you get this updated please reboot ISE so it rejoins AD. Try your tests again.
http://technet.microsoft.com/en-us/library/cc772007.aspx
Thanks,
Tarik Admani
*Please rate helpful posts* -
How to register a supplier with VAT number which is different from the co
We find it difficult to register a supplier as in the reference above. The supplier is Dutch but the VAT number is Italian. SAP system checks the VAT number and the country of origin and we cannot register the supplier. How can we do it?
RegardsHi,
U can maintain this data by clicking on CIN DETAILS tab of vendor master----
>SALES TAX/SERVICE TAX.
OR
VENDOR MASTER-->CONTROL DATA>TAX INFORMATION---->TAX NUMBER. -
Why is my DW layout looking different from the browsers? So confused...
Hi guys,
I've been successfully struggling through my first attempt at building a website using Fireworks and DW CS4. What has been puzzling me is that how the site looks in DW is not how it looks in my browser. Oddly enough, all the browsers are displaying exactly what I want (so far), but in the DW layout, some of my images are overlapping. It's as if I have to get them almost on top of each other just so they can appear close together in browsers.
This is making it somewhat tough to add my hyperlinks to images that are underneath the other ones and I am worried that I am doing something wrong. I posted pictures of both the DW layout and what is showing up in the browsers I have checked (Firefox, Safari and Internet Explorer all look the same). Note: The first pic on top is displaying in Firefox, the second pic beneath in the layout in DW.
Thanks a million in advance#1 Design View is the result of your underlying HTML & CSS code. At best it's an approximation of what you can expect to see in browsers. For best results, work in Split View or Code View. Use Live View & Preview in browsers to test your layout.
#2 DW is not click & drag like your graphics apps. If you're trying to work this way, you'll have poor results.
#3 Fireworks is great for creating web images & comps. It's not so great at generating HTML code. Use DW to build your page layout. If you're new to web design, it's much easier to start projects with a pre-built CSS Layout. See DW Starter Pages below.
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
Hope this helps,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/ -
I just downloaded an iphoto update and when I tried to share my photos was asked for email and password. I must have typed in the info wrong because I keep getting an error message. I don't see how to change the info to the correct mistake..
I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account. On my ipad it logs into my original email account and I see no where to log into another email account. If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to. It did not send to back up email account either.
Can I log into 2 email accounts on my ipad where it says mail at bottom?
Can I have 2 apple ids?
If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
(won't let me)
If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it. -
Safari problem: when I switch back into safari from another application, the menu bar comes up but no tabs or windows. What's going on? Just started yesterday. I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
I have tried shutting down, closing tabs, with no success. What's going on and how can I fix it?
Thanks,
Cindi B
PS: I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...A Safari extension or third party plugin may be causing the menu bar issue.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
As for which OS X is installed.
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
The version is noted there.
v10.6 Snow Leopard v10.7 Lion v10.8 Mountain Lion
It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here. -
The top bar of my browser is written in Chinese, Why and how do I fix it
The top bar of my browser is written in Chinese, Why and how do I fix it?
== This happened ==
Every time Firefox opened
== 3 days agoIf you see CJK (Chinese/Japanese) characters on the Firefox title bar or the Windows Taskbar then that can happen if Firefox switches to UTF-16 encoding for some reason.
The ''RealPlayer Browser Record Plugin'' extension (Tools > Add-ons > Extensions) has been reported to cause that issue.
Be sure not to get confused with the RealPlayer plugin (Tools > Add-ons > Plugins) that plays media files.
The extension adds some extra features like saving media files.
You can disable/remove the ''RealPlayer Browser Record Plugin'' extension in the RealPlayer Preferences (RealPlayer: Tools > Preferences > Download & Recording)
See also [[Troubleshooting extensions and themes]] -
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.
Nevermind. I figured it out.
Maybe you are looking for
-
How do i install photo shop elements 11 on mac book pro with no disk drive
i bought adobe photoshop elements 11 about a year ago. and want to install it on our mac book pro but not sure how to, as the mac doesn't have a disc drive , any information is greatly appreciated
-
New Zen Touch not being detected by Windows
I just bought a 20 gig Zen Touch off ebay, and tried to get it to run. The firmware on the Zen tells me it's version 2..0, which is the PlaysForSure version. So, I downloaded the driver specific to PlaysForSure, and tried to run it. It looked like it
-
I can't access any of my InDesign files
Hi there, This morning I turned on my work computer only to discover I couldn't access any of my Indesign, photoshop or illustrator files, despite the fact that some of the files were saved on both the computer and an external hard drive. There's now
-
Macro Warning When Creating PDF
Windows 7, Word 2007, Acrobat X Pro. Using Acrobat to convert an MS Word Doc to PDF, I get a message: "The macros in this project are disabled. Please refer to the online help or documentation of the host application to determine how to enable macr
-
Ive always had good speeds. A speed test doesnt show any slowdowns in DL speed and the ping is fine, yet all the sudden as of late webpages load slower. Pictures load slowly, and pages take a second before they pop up. Its loading webpages in parts