In the View Responses functionality

In the View Responses section of a form, can I make the options for a datapoint a dropdown field rather than a free form field?

Also, today, I am able to go into the private view and the header columns are normal sized like they should be in the public view. But that was not the case yesterday. So, I'm perplexed

Similar Messages

  • How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

    How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

    There are more than one Applications folders. At the root level of your system is an Applications folder for all users, where most installations go. Every user, including you, also has a separat Applications folder.
    Check all of them.

  • Columns' positions do not match in pdf form compared to the "View Response" tab in Form Central

    I think I understand why this happened. And I am loookng for workarounds.
    For example, let's say in the beginning you have five fields (A, B, C, D, E) in your form. Later on, you decided that you need to add two more fields says A1, and C1, and now the fields are as follow A, A1, B, C, C1, D, E. After you submitted the form to Adobe Form Central, you take a look at the "View Responses" tab, and you realize the order of the columns are as follow A, B, C, D, E, A1, C1.
    I believe this happened because the new fields A1, and C1 were added later. But I am wondering what are the workarounds?
    Thanks in advance.

    Yes, it does work in Acrobat Reader. I'm just trying to determine if this is a recent bug in Tiger (like maybe because of the 10.4.9 update) or if it's something related to the particular version of Acrobat the file was created in.
    I haven't had to have Acrobat Reader on any of my Mac's since Jaguar.

  • Can i insert an image in the View responses tab for each formula ?

    In the View responses tab, i would like to insert an image as a thumbnail for each formula to identify my products for a multiple products survey. Is it possible ?

    Hi;
    There is no support for displaying an image or thumbnail in the View Responses table.
    Thanks,
    Josh

  • Can I print the "view responses" pages?

    We just came off of an event and used Forms Central for our evaluation form.  I can print the Summary Report, but I want to print the View Responses page, as we asked folks for comments in several areas.
    mkT

    Thank you!
    Blessings,
    MelanieMelanie Timmerman
    *Executive Admin. Asst./Office ManagerLa Crosse Area Synod,
    ELCA608-788-5000*
    PRIVILEGED AND CONFIDENTIAL
    This e-mail may contain privileged and confidential information and is only
    for the use of the specific individual(s) to whom it is addressed.  If you
    are not an intended recipient of this e-mail please do not use,
    disseminate, or copy this e-mail or the information contained in it or
    attached to it.  If you have received this e-mail in error, please delete
    it and immediately notify the sender named above by e-mail reply.  Thank
    you.

  • Can I make the summary report tabulate multiple sheets placed within the "view responses" area?

    Can I make the summary report tabulate multiple sheets placed within the "view responses" area?

    Hmmm...I thought this tool was going to be a good replacement for Survey Monkey. I was wrong. I definitely need a way to tabulate responses from multiple surveys so that I can roll them up by region or state or district. Do you have any suggestions of how I could accomplish this in AFC?

  • How are additional sheets used in the view responses?

    I would like to find out how others are using the additional sheets in view respones?  are you able to send certain answers to the form to specific sheets?  If so I would be very excited... im just not sure how people are using them and if im missing a key feature i need to know about?

    Additional sheets (and tables) are not connected to the main response table/sheet. These sheets are really meant to be used to work with a snapshot of the data or to keep track of things you need to do.
    Randy

  • Is there a way to prevent "Readers" from downloading attachments in the "View Responses" table?

    I only want Readers of the table to look, and not download other Readers attachments that are in different rows. I only want the author and the original reader to have access  to that.

    Yes, if privacy is the reason for hiding a column (which it is for me), it does no good if any viewer can just "Save as" and download all the submitted data, hidden and visible.
    I'd opt for making the download option only available to the authors, but at least there should be an option to disable the "Save as Excel / PDF" buttons - or at least only download the visible columns.

  • View responses is not the same view

    my form is not showing the view responses the same - its like the view method was changed but i didnt change it and now i dont know how to change it back i need help fast

    What I mean is that when this first started I could see all responses
    easily - like the columns were all laid out by subject of the form i
    created and now the responses are showing up vertically and before it was
    horizontally and so now i cant read anything on my responses. I dont know a
    phone number to call for support and i use this for my buisness for orders
    and i am shutdown right now over this i need help here

  • How do I restore field description in "View Responses" table

    I inadvertendtly deleted the row of text at the top of the View Responses table that is linked to the form field. So now in the View Responses table, I can see the answers but not the questions. Is there a way to restore the link back to the form field without going into the table and typing in all the questions?
    Figured it out. Discovered that by editing one character in the field on thje form, the text reappears in the table.

    So do you not have a question any longer then?  Sounds like you figured out a way to get them back.  Actually a good trick, I'll add it to the related FAQ - thanks.
    Thanks,
    Josh

  • "View Responses" can I see who has responded?

    Is there any way in the "View Responses" tab to see who it is that submitted the form?
    Like their email where they received the link?

    Not directly. The FormsCentral service doesn't know who you sent the form to. To get this information you would need to add an email address field to your form so users could provide their email address to you.
    Randy

  • View responses - any way to print or view as form?

    Hi - am new to forms central
    Previous posted links to .pdf forms at acrobat.com. There is was possible to print individual reponses as a .pdf
    Is there a was to format the reponses as a form - I have printed the 'Show Detail' view but it doesnt seem to include the form name - we have a number of forms and doesn't seem formatable.
    Is there any way to get the reponses in a way that makes it easy to print them out for actioning.
    Thanks

    We now support saving a response from the View Responses tab to PDF (that retains the form design shown on the Design tab). The PDF can be shared, archived or printed using Adobe Reader.
    You can read more about it here: http://forums.adobe.com/thread/1085672
    Please try it out and give us your feedback.
    Randy

  • Frequency Response Function & FFT & Inverse FFT (problem of unit Volts-RMS)

    Hello everyone,
    I am currently working on a VI in order to compare two analog signals : the first one corresponds to the output signal (my reference) which is sent by my data acquisition card to a shaker and the second one corresponds to the input signal recorded by an accelerometer fixed on the same shaker. The final goal of the VI is to correct the analog output signal by using the analog input recorded signal in order to have the vibrations on the shaker which corresponds to what we really want.
    To summary, I have a problem of unit with the Volts-RMS...
    So this is my method for the VI :
    First, I have to calculate the Frequency Response Function between the two analog signals (output and input). For it, I use the " Frequency Response Function (Real-Im).vi " which returns the complex values of the FRF in Volts-RMS (but I don't want to use this unit).
    Then, I want to calculate the FFT of the analog output signal (my reference). There are two different blocs which can be used : " FFT Spectrum (Real-Im).vi " and " FFT.vi ".
    The " FFT Spectrum (Real-Im).vi " returns the FFT complex values of the signal in Volts-RMS and the " FFT.vi " returns the FFT complex values in Volts (or say me if I am wrong, thank you). I really would like to use the second one because of the unit.
    Then, I divide the FFT just calculated with the Frequency Response Function calculated just before.
    For the end, I calculate the inverse FFT of that with the " Inverse FFT.vi " which use the complex values with the same unit than for the " FFT.vi ".
    I don't want to use the Volts-RMS unit because I absolutly want to use the blocs " FFT.vi " and " Inverse FFT.vi ".
    The problem is that I don't find a bloc which use the same unit for the Frequency Response Function. The " Frequency Response Function (Real-Im).vi " returns only the complex values in Volts-RMS unit. Maybe it is possible to convert it correctly? Or maybe there is an other bloc which can be used in order to calculate the Frequency Response Function with the same init than for the FFT and Inverse FFT ? Because I can't mix everything for the moment...
    Thank you for your help,
    Best regards,
    Sebastien

    Hello Preston,
    No, I have not use the Sound and Vibration toolkit. I have only used the signal processing toolkit with the two toolboxes " Waveform measurement " and " Transforms ".
    But I think that what I have done for the moment in my VI is correct (I have finished the complete VI). But I am not sure of the units (Volts, Volts-RMS...) and I would like to understand.
    I have tried with the Sound and Vibration toolkit for the frequency response function (because you say me that it deals with all the unit conversion) and I can obtain the same results than with the " Frequency Response Function.vi " of the toolbox " Waveform measurement ".
    But I would like to understand the units (see my previous post please). For example, for the FFT (the result is a complex), why sometimes it is in Volts, sometimes it is in Volts-RMS ? Is it possible to convert it ? How ?
    If you want, I can attach on the forum my VI and that will maybe help you to explain me. Maybe it will help other people interested.
    And if someone else can give me other precisions or advices about it, do not hesitate.
    Thank you for your help,
    Sebastien

  • View Responses not matching form

    Our form categories are not matching the columns for our view responses headers.  Some are missing altogether.  How do I fix this?  I do not think that adding the column in the view responses spreadsheet will correlate with the form.  Help please!

    Do you have any filters specified (Personal view) within the Response table?

  • User response function() for Date Prompt

    Hi Experts,
    I have the requirement to show the date enterted in the prompt in the column of the webi report.
    I used the User response function e.g. =(UserResponse("Report Date").
    Now I am getting the value as 5/14/2014 12:00:00 AM. I dont want to see the time stamp with the date and aslo i want to change the format of the
    date to - yymmdd like 140514.
    Please provide your inputs.
    Thanks,
    Abhimanyu Sharma.

    Hi Arjit,
    I closed the thread.
    Can you please help in the below issue :
    I have two columns in the BEX report:
    1. "Local Count" which is restricted with Multiple Single Value variable "ZIN_CITY" on navigational Attribue 0ROUTE__0ROUTEID.
    2. "Out Count " which is restricted with Multiple Single Value variable "ZOUT_CITY" on navigational Attribue 0ROUTE__0ROUTEID.
    I put value 100 in prompt ZIN_CITY and 200 in ZOUT_CITY when i run this query in BOBJ WEbi.
    But i am getting the error - Not able to retrieve data. i checked in the backend and data is present and also Bex query is working fine.
    IF i change the property of variable to Single value then it is working fine in WEBi.
    Also i tried another method - irresprctive of setting the prompt in BEx on Nav attr 0ROUTE__0ROUTEID, i created the prompt in BOBJ WEBi, but LOVs (list of values)are not coming in the prompt.
    Please suggest on this?

Maybe you are looking for

  • Advice on splitting an application amongst projects; please.

    Advice on splitting an application amongst projects; please. Hi jDev Team. Please advise on how you envisioned a developer (or developer team) to split up a large scale enterprise application amongst projects. For example, a typical accounting system

  • Safe mode: visual indicator?

    hi: i had to use safe mode extensively to get myself out a major pickle. i am back up running again, nearly a day later. but now, i wonder, how do i know for sure, there is no parts of "safe mode" still ON. is there a visual indicator? I have my book

  • Transparent Backgrounds

    This is a beginner's question. I am using Illustrator v.10. I am just trying to produce some text that has a drop shadow and a transparent background. I want to export to a jpg file and put it in a website header so the gradient of the header with sh

  • Database seems to fragmented

    I have one scenario on our live production DB.This problem seems to be like performance perspective.I want your advice and your optimal solution to overcome from this issue. 1Likewise we have our live production system in which we have did some year

  • Large Album Art Display Problem

    I accidentally pressed into the option provided by iPod nano that allows you to view the album art in a large size that takes up the screen. In turn, the other information and the length of the song disappeared, only to be replaced by the outline of