In VA01 In Schedule line Delivery date not getting populated

Hello,
We have developed enhancement for VA01 tcode.
Depending upon the quatity entered for a material it should show one more item as free good.
If quatity is 10 for a line item 10 then it should show item 20 by default same mateerial and quatilty as 1.We have done this it is working fine.
But if we select free good item in our case it is 20 and click on schedule line item buttom all quaitity fields getting populated.but delivery date not getting populated for only free good.for line item 10 it showing properly.
Can any one please suggest what i need to do in order to display delivery date for free good.
Thanks in advance.
Regards.

Thanks for your response.
Actually i have seen technical settings for that field.it is rv45a-etdat.this field has value till MV45AFZZ.seen in debugger.
Looks like it is clearing some where after the above include.Any suggisitions welcome.Thanks again.

Similar Messages

Schedule line : delivery date not changes

Dear Gurus,
When I change delivery date change in delivery documents and sales documents, picking date, pricing date, etc.. changes, but in sales document, schedule line's delivery date does not changes.
Please help me to change the same and kindly tell me, will it make any problem.
fyi..
If I have not created delivery for the respective sales document, then I can able to change the delivery date in the schedule line(sales document).
I'm just a new born in this area so please feed me...
Regards
Viswanthan.G

Hi Viswanath,
When you change delivery date change in delivery documents and sales documents, picking date, pricing date, etc.. changes, but in sales document, schedule line's delivery date does not changes.
This is because the system calculates the dates based on avaliabiltiy check and it picks data from material master as well, based on purchasing processing time, GR processing time, loading time ..etc and it will conclude accordingly.
Its like system will do backward schdeuling and establishes material avaliabilty date.
Thanks & Regards,
Krishna

Update Schedule line Delivery date using Bapi_po_Change

Hi all,
I am using Bapi_po_change to Update the Schedule line Delivery date(EKET-EINDT) for the PO based on the Item and the Schedule line.
I am passing the PO number, Po header, Item structure, Schedule line Structure.
But the Date is not getting updated in the Eket table.
Please suggest.

Hi Sukriti,
Thanks for the Response, yes i have used the Bapi Transaction Commit Also .
The point is I am able to Update the Statistical Delivery Date in the Same EKET table using BAPI_PO_Change .I have Checked all the Ways to update the EKET-EINDT(Delivery Date)but no Unable to do it.

Calculate all days in month from schedule line delivery date for 12 mths

Hi experts,
I am trying to solve a problem and would appreciate any help! Im on BI7.
The user will input a date for the schedule line delivery date via a variable.
From this date I need to go forward 12 months exactly and display a key figure (outstanding value) by months but the first and last months must only use the days in that month i.e not the whole month if not selected by the user.
I.e if the user types in 13.05.2008
The display need to show (columns)
May 08 (13th to end of May 2008)
June 08   (All)
July 08    (All)
August 08    (All)
Sept 08    (All)
Oct 08     (All)
Nov 08     (All)
Dec 08    (All)
Jan 09     (All)
Feb 09    (All)
Mar 09    (All)
April 09   (All)
May 09 (1st to 12)
So I neen to restrict the key figure (Outstanding Value) by Schedule Line Delivery Date and display as above on a 12 month forecast basis from the day (sch line delivery daye) entered as a variable by the user.
I also need the first month to only show the dates in the month remaining including the date entered as a variable. The last month must go up to the day before exactly a year in front.
I have created the 12 months as a structure and can include the key figure and the schedule line delivery date. The schedule line delivery date for each period needs to be restricted. How can I do this to achieve the above?
Thanks in advance. Will assign good points for a speedy solution.
Best
Steve.

Hi,
    Check "OVLY" and "OVLZ" and If the sceduling is active for he shipping point /sales document type. Check "OVXD" and see If the Loading time/ Pick/pack time is determined from it. If they are getting determined from shipping point check the shipping point calender in "SCAL" .If it has saturday and sunday as holidays ,then you may have to change them. And check If the customer has goods recieving hours assigned to him (In customer master unloading point). If he has only 5 working days and If he accepts only goods at 8 am in the morining then system would propose like this.Kindly please let me know If you need any more Information on this.
Regards
Ram Pedarla

Schedule line delivery date

Hi ,
I am creating a order ( for which Delivery Not created ) for which schedule line delivery date is alloted . Which i can check in VBEP table .
But when extracting the data in 2Lis_12_VCSCL , the order is not coming . Is the extractor is correce or anyother way of checking ( check in rsa3 also )
Regards
Ankit

Hello,
the extractor 2LIS_12_VCSCL is correct to extract schedule lines information of a sales order. Check with your mappings.
Regards,
NK.A

Schedule Line Delivery Date Calculation with Transportation Scheduling

Hi All,
We are currently running into a problem where our Sales Order Schedule Line delivery dates are being pushed out too far into the future - because of the Calendar being used to determine the transit time.
We have 'Delivery Scheduling' and 'Transportation Scheduling' activated for our Sales Document type
We have Routes that are configured with a 'Transit Time' and a 'Factory Calendar'
Order Scenario:
'Factory Calendar' assigned to our 'Route' is setup with only one 'Workday' in a given week e.g. Wednesday
Our 'Route' has a Transit Time of 2 days
We create a Sales Order on Monday for a Material that is available in our Plant
The 'Goods Issue' date is being determined correctly for the next Workday - being Wednesday
The 'Delivery Date' is extending out over 15 days (2 Wednesdays into the future) - since it is working on 'Calendar Days' and not 'Actual Days'
Does anyone know of a way (config or other) to only influence the 'Goods Issue' date with the 'Factory Calendar' assigned to the Route, and have the 'Delivery Date' calculated using the Transit Time on the Route and 'Actual Days' rather than Calendar days?
All help greatly appreciated.
Thanks,
Ravelle<i></i>

Hi Pathik,
Thanks for your reply. I have already maintained the Calendars I'm using for this business process in <SCAL> - same as <OY05>.
The problem I'm having though is that by assigning a Calendar directly to my route (which I doing to influence the goods issue date - using a 1 Working Day Calendar) it is also taking precedence in determining the Transit time - which in this case I don't want, as I want my Transit time to be determined using a 5 Working Day Calendar.
I don't think this problem has a config option as a work around...I think the only possibility in this case is a development to achieve the results we need.
Thanks,
Ravelle

I want to pick up Schedule line Delivery date based on Sales Order of Mater

Hi Experts,
I have one scenario like,
I want to pick up Schedule line Delivery date based on Sales Order of Material.
For example :
Go to va03
Give the order no
Press the enter
Double click on material.
Go to Schedule line Tab
Then we can find out the Delivery date .
I want to pick up the that Delivery date. Could you please help on that.
Thanks,
Amjad.

Hi,
schedule line dates are available in VBEP.
VBEP-VBELN = sales order number.
VBEP-EDATU = schedule line date.
REgards,
Raghavendra

Data not getting populated in Payslip in ESS Portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Hello,
Do one thing for executing the PZ11_PDF trsaction please follow following steps.
1. Once you log in SAP system with same User - Id which you r using on Portal .
Once log in PUT "/N" in the command box . Then put the trasaction "PZ11_PDF" and execute it will
Call the salary statement .
Or
Once you log in SAP system put the trasction "/nsbwp" then give the trasaction "PZ11_PDF" it will
call the salary statement ..
give inputs once you done
.....The issue with Authorisations please check it ...
Add this object in ESS role "S_SERVICE' ...
and this object in ESS role "P_PERNR" ---infotype 0008
Edited by: Vivek D Jadhav on Jun 15, 2009 11:49 AM

Data not getting populated in ESS Payslip in portal

Hi All
I am tryig to display Payslip in Portal. Have done all the necessary configuration in Benefits and payments->Salary statement->HRFOR/ EDTIN features.
Correct Payslip form is visible but data is not getting populated in the payslip.
Have tested the Payslip in PC00_M40_CEDT transaction with the variant i have set for HRFOR/EDTIN features and Payslip data is displayed correctly.
Have checked for PZ11_PDF transaction but i get a message saying it cannot be accessed through Easy access.
Can anyone pls let me know what might be the reason for data not getting populated in Payslip in Portal?
what is role of PZ11_PDF transaction in Payslip display in Portal?
Regards
Asha

Asha,
Maintain Feature EDPDF which determines the SMARTFORM being used to make the payslip available for employees. This is more of a HR related issue and I believe if you post this in the ESS or HR Forum you would be able to resolve this issue.
Good Luck!
Sandeep Tudumu

Actual GI Date not getting populated

Hi
My issue is that after the change in Fiscal Year, now in some of the STO Deliveries the Actual GI Date is not getting populated in Delivery Document, however the PGI is complete.
Any suggestion where should I look, and what may be reason / solution.
Regards
AA

AA,
What Lakshmipati has said is correct the Actual GI date does not get populated we enter it manually, only in the case if you are doing a delivery for 26th march then you can enter in Actual GI date field 26.03.2008. (at that point the Actual GI date will be empty, and you can enter the required date) This date is being taken by the material document which will be generated after performing PGI.
If you are raising the Order or STO today and you are pursuing with delivery today itself then the system willl take today's date.
Regards
Sathya

Item data not getting populated correctly

Hi All,
I am using the following code to fill item data while creating order using BAPI_BUSPROCESSND_CREATEMULTI.
loop.
*----Fill the Item details
lv_number = lv_number + 10.
lv_schdno = lv_cshdno + 1.
ls_item-handle            = '0000000001'.
ls_item-header_handle     = '0000000001'.
ls_item-ordered_prod      = lv_ordered_prod. "material
ls_item-number_int        = lv_number.
INSERT ls_item INTO TABLE lt_item.
*----Fill the Scheduline Details
ls_scheduleline-item_handle      = '0000000001'.
ls_scheduleline-handle           = '0000000001'.
ls_scheduleline-quantity         = lv_quan.
ls_scheduleline-schedlin_no      = lv_schdno.
INSERT ls_scheduleline INTO TABLE lt_scheduleline.
endloop.
Order is getting created fine but it has only the last item. Previous line items are not getting added to the order. Do I need to pass any other parameters ot the item or scheduleline table?
Please help me.
Thanks in Advance!
Sonali.

Hi Marisa,
Thank you for the reply!
I have incremented the ls_item-handle and ls_item-header_handle fields. Now it is taking the first line item only and ignoring the rest of them.
Should I increment the ls_input-fields-ref_handle value also?
Thanks,
Sonali.

Data not getting populated in output form

hi all,
i have to create a layout set with two pages, and fill the first page with ekko data and second page with ekpo data. i have designed the layout set. but the values are not getting populated in my form and logo is also not displaying.....
can anyone help me.
regards
mano

Hi,
1.Delete the Logo Command from the Textelement.And re include from Include ->Graphics->Stored document server>Select logo>execute.
2.Have you written the Driver program for the Layout.
IF yes,Have you assign the Form and Driver program in NACE.
3.If yes,Then Debug the Driver and Script ,check those values are coming or not.
Regards,
Shiva.

Baseline date not getting populated from SRM invoices posted to ECC 6.0

Hi,
We are currently in ECC 6.0. The SRM system is in 4.0. We have this particular problem that the baseline date is not getting populated from the Invoices posted from the SRM. The baseline date is blank and the document is saved.
Did anyone face the same problem??? Can you please refer SAP note 541934 and expand........
Thanks
Aravind
Edited by: Aitipamula Aravind on Aug 10, 2009 5:13 AM

Hello,
Yes, you could check the attached note 541934 and regard the implementation of the field ZFBDT in the invoicing document.
Note 541934 provides a solution how to achieve the MM-customizing for payment baseline dates getting effective for invoices with SRM-origin. This note needs to be applied at your ERP-MM-side in the former plug-in-layer. As described in the note, this is a modification. It's recommended to apply in non-productive system first.
Hope the above infor.are helps for you!
Best Regards,
Gladys xing

Sales data not getting populated for Material master by LSMW.

Hi,
When I am trying to create material manual for sales view material is getting created and the table MVKE(Sales Data for Material) is getting populated with the sales data. But when i Am trying with LSMW METHOD
Object          :     0020
Method          :     0000
Program Name    :     RMDATIND
Program Type    :     D(Direct Input)
    materials are geeting created but the sales data is not getting populated in the table MVKE(Sales Data for Material) and LSMW program also not showing any error.
Can any one tell me what is teh problem here.
Thanks,
Naren.

Hi,
along with VKORG, VTWEG in <b>BMM00</b> are you mapping the below one's also.
BMM00-XEIV1 = 'X'. "sales 1 view
BMM00-XEIV2 = 'X'. "sales 2 view
this will enable the sales(1/2) view.
Check it once..
Regards
vijay

Schedule line delivery dates change in VA01

Experts,
User is adding some days for a material in maintenance table and it is like below.
Material Days Plant
2525252 100 ABCD
3636363 150 PQRS
The requirement is --
While creating sales orders or changing sales orders(VA01 or VA02) while adding this material(2525252)in the line item - In schedule line items Delivery date should changed (some thing like get added 100days)
I have added my logic in routine RV03VFZZ. But some materials are not getting changed due to avilability check.
How can i bypass availability check ?
(tried in USEREXIT_MOVE_FIELD_TO_VBEP... but no use).
Thanks,
Priya

Take a look an ATP00001 in SMOD. However, this looks to me as a classic case when we're trying to use ABAP to compensate for poor functional choices or an incorrect business process. I find it hard to believe this cannot be done by other means than such funky ABAP.

In VA01 In Schedule line Delivery date not getting populated

Similar Messages

Maybe you are looking for