In Win 7 64bit I get the following error upon every reboot. "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library " This happened yesterday, 8/23/2011 after downloading Apple iTunes 10.4.
This happened yesterday, 8/24/2011 after downloading Apple iTunes 10.4. In Win 7 64bit I get the following error upon every reboot. "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Please how do I fix this, Thanks.
In the case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck
Similar Messages
-
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
Every time I start my PC it says Procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll It also keeps freezing on Itunes and I cannot sync. Please can anyone help?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
Ever since I recently upgrading Itunes, I cannot access the Itunes store, my phone will not sync to my laptop, and this pops up everytime I restart my computer: "AppleSyncNotifier.exe - Entry Point Not Found: The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" I have tried several things without success. Can someone PLEASE tell me what else I can try. Thanks!
Hi Janice - glad to hear you got one of your problems sorted
I understand that your phone doesn't sync automatically when you connect it to your PC with iTunes running. First question is do you see that your phone is connected in iTunes when you plug it in? It should show on the left side of the page about halfway. Usually if you haven't already started iTunes, when you connect your phone to the PC it will open autoamtically and you will see the phone is connected.
If it doesn't show as connected then I refer you to this page
I can tell you that my phone doesn't sync automatically because I didn't want it to, I've purposefully set it on iTunes to sync manually. I do it by left clicking on where my phone shows there and in the page that comes up I click Sync. If you want it to operate automatically then you need to set it to do so. You have that option by clicking on EDIT at the top left of itunes - then PREFERENCES - DEVICES and uncheck 'prevent devices from syncing automatically'. There may also be something to click on the phone page to sync automatically.
For the 'conflict' issue I refer you to this discussion where others have already offered advice.
Good luck with it Janice, and again, let me know how you get on. -
This happens at PC startup
Hi Janice - glad to hear you got one of your problems sorted
I understand that your phone doesn't sync automatically when you connect it to your PC with iTunes running. First question is do you see that your phone is connected in iTunes when you plug it in? It should show on the left side of the page about halfway. Usually if you haven't already started iTunes, when you connect your phone to the PC it will open autoamtically and you will see the phone is connected.
If it doesn't show as connected then I refer you to this page
I can tell you that my phone doesn't sync automatically because I didn't want it to, I've purposefully set it on iTunes to sync manually. I do it by left clicking on where my phone shows there and in the page that comes up I click Sync. If you want it to operate automatically then you need to set it to do so. You have that option by clicking on EDIT at the top left of itunes - then PREFERENCES - DEVICES and uncheck 'prevent devices from syncing automatically'. There may also be something to click on the phone page to sync automatically.
For the 'conflict' issue I refer you to this discussion where others have already offered advice.
Good luck with it Janice, and again, let me know how you get on. -
I keep getting the following message: The procedure entry point xmlTextReaderConstName could not be located in the dynamic lnk library libxml2.dll. How do I fix this?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
-
Windows version 7. Auto update of iTunes to version 12.1 from 12.0.1.
At end of install process, message 'iTunes was not installed correctly. Error 7 (Windows error 127).
Tried to launch iTunes, anyway, but immediately got message 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'.
Tried downloading iTunes and updating manually - get exactly the same result.
No problem using iTunes before this.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2 -
I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?
Maybe you are looking for
-
How do you set up sagepay as a payment gateway?
I got carried away with my new creative cloud subscription ad Muse then promptly myself in the foot by taking on a client using Business Catalyst. Can anyone tell me what I need to do to get Sagepay payment gateway working?
-
Hi experts, my customer has solman 7.1 EHP1 installed. Which functions are free of charge ? Can't find good documentation in the jungle. Please help to find docs. Kind regards W
-
How to display the environment variable DYLD_LIBRARY_PATH in a Mac machine
I preset the DYLD_LIBRARY_PATH with the command "export DYLD_LIBRARY_PATH=/Applications/CLHEP/lib". If I run the command "echo $DYLD_LIBRARY_PATH" in a terminal, I can get correct information--"/Applications/CLHEP/lib". But if I use "system exec.vi"
-
Excel OLE acces in the Application Server
Hi all, I have a requirement to Output a formatted(Bold fonts, Merged Cells etc.) Excel File. It is to be run as background process. So ideally, the file will be produced in the ApplicationServer and will already contain the formatting. If I am to us
-
Can i set applets as my wallpaper?
read the above ^^^.