Inactive version to active version

Hi Gurus.
In this scenario I want to convert the PIR's that I am getting from APO in inactive version and I want to convert it into active version before running the MRP.Pls suggest how to do it?

Hello Dardo,
    Mostly you can do planning with different version numbers in planned independent requirent.Unless and until you active the version, it will not transfer the independent reqmt to stock requirement list.
     To active any version number, go to change mode (T.C MD62) and give the material number, plant and version number which you want to activate and press enter, it will go to next screen.There besides material name field there is check box for version.Just tick that.Now if you see in stock reqmt list (T.C MD04) you will see the indep reqmt got transfered.
      Hope this way you will resolve your problem.

Similar Messages

  • Copy Inactive Version to Active Version in MC78

    Hi PP Gurus,
    I am not able to copy the inactive version (019) to Active Version (A00) in TCode MC78, it gives the message A00 already exists.
    But when i want to transport the values to Demand Mangement (thru TCode MC75) it will ask for Active Version.
    Please suggest where am i doing wrong?
    Thanks in Advance,
    Regards
    Rehman
    Points will be Rewarded for a Detail Answers.

    Hello Rehman,
    The message what you are getting is standard and warning message. It is not the error message.
    While copying from inactive version to avtive version (A00), this will populate, you just have to enter omce again, then you will get one more pop-up saying "A00 will be reset", agaian you have to accept the message.
    Now you check your version will be copied from MC88 transcation by clicking on active version.
    If problem solves rewards your points.
    Regards
    TAJUDDIN

  • Active version and Inactive version in Product llocation plan

    Hi Gurus,
    We are using product allocation functionality, in which i would like to what is the importance of active and Inactive versions.
    Which is the version in which we need to maintain the product allocation (MC94).
    Regards,
    Babs.

    Hi dsk,
    Thank you for the feedback on active version and inactive version.
    My doubt is if you look in to transaction MC94 , we have two tabs one u201CActive versionu201D and other u201CInactive versionu201D.
    When I maintained product allocation in Active version u201CA00u201D and executed the sales order product allocation is not happening. And then I tried to maintain the allocation under Inactive Version u201C000u201D then executed the sales order. Now the product allocation is happening and even the structure is getting updated after saving the sales order. So I need to under stand under which version we need to maintain the allocation so that allocation functionality will work during sales order creation.
    Regards,
    Babs

  • Active & Inactive version in SOP

    Hi All,
    What is the usage of Active and Inactive version in SOP?
    Best regards,
    Fateme Goudarzi

    Hi
            The concept of Inactive version in SOP is ,you can plan a material or PG  based on diffrent history data say Forecast,CO/PA and Sale Iformation system.For each planning version we can assign one Inactive version. You can do comparision and analysis with versions.After analysis and comparisin ,only one version is marked as active which will be send to Demand management.
    Regards
    Velmurugan S

  • Inactive version of SOP

    Dear Experts,
    When i am trying to create plan, suspose system will prompt a small box and key in version number and description for inactive version. After that , only transfer to demand management as active version.
    But , now system does not prompt a box and straight away use A00 and it is an active version.
    Is there anyone face this problem and might to share what is the configuration i might miss out?
    Thank you.

    Hi Bodgan,
    Please refer the Step.For SOP through LTP
    For SOP
    1.Create Plan in flexible planning  MC93
    2.Sales plan verification transfer to active version MC8V
    3.Transfer sales plan to production plan MC8Q
    For LTP
    1.Create Inactive Demand Management MD61
    2.Copy SOP Production plan to Long term planning MS64
    3.LTP Planning Scenario  MS31
    4.LTP MRP MS01
    If still not clear i will send you the document regarding what you required.
    Thanks,
    Mohit

  • Inactive version

    Hello friends,
    I am an outsider for web-dynpro
    i am facing one problem ... when i am running cProjects (BSP Application) ..web page is showing me error that dpr_settings is inactive.......
    when in SE80 i went to web dynpro  dpr_mainframe component(which has usage componet dpr_settings) ..it is showing status as active
    but when i double click on it is showing message that "dpr_mainframe has inactive versions"
    do i need to delete certain versions through version management and how?...so that cProject page will run correctly.
    Thanks and regards
    Niketan

    Hello,
    When i try to activate dpr_settings it gives me following error
    Component DPR_SETTINGS cannot be generated due to errors -> long text
        Message no. SWDP_WB_TOOL100
    Diagnosis
        The Web Dynpro component cannot be generated due to serious (syntax)
        errors.
    Procedure
        Check the Web Dynpro component and correct all the reported errors.
    regards
    Niketan

  • Calling inactive version of ABAP object from Java

    Hello,
    When I call an ABAP object from Java Program which version of ABAP object is called inactive or active ?
    Is there a mechanism to call the current inactive version or any other previous inactive /active versions ?
    Regards,
    Tarun

    Only the "active" version of ABAP code is active and runnable.
    You cannot run inactive versions. Like you have to compile a .java file to a .class file o make it runnable in the JVM.

  • 'There is an inactive version of object nnnnnnnnn'

    I have been tasked with rectifying a transport that someone has foolishly created and contains 40+ OSS notes. I don't know the history of what's happened to this transport, other than it will not release due to inactive versions of objects. I have gone through all 600 objects and activated them were applicable. However, there are a few which say 'There is an inactive version of object nnnnnnnn' when I attempt to activate them. How can get them activated?.
    Jason

    Many thanks, I did not have an issue identify the inactive objects, the transport release process did that,. The problem that I had was in actually activation them. If I clicked on the object and was taken into SE80 I then displayed the inactive objects and then activated them, but the same message was shown saying that there was an inactive version of the object.
    My colleague has this morning managed to activate them, so I assume that this problem may have been caused by the fact that service patches were being applied at the time so maybe some locking was going on.
    Anyway, thanks to alll, and that particular problem was overcome, but we now have another problem to deal with in the same transport as someone has applied notes via snotes without completing all the pre-implementation and post implementation instructions, and this is for a number of notes. Doh, why is my life always made harder by other people.
    Jas

  • PDS for SNP in inactive version

    Hi all!
    Does anybody knows how can I transfer a PDS for SNP in an inactive version?
    Thanks in advance!

    Rafael,
    PDS is always created in APO in active model (000) only. You cannot maintain/change PDS in APO. Once transferred, PDS should be available for all existing versions in 000 model. Try using it in any version while executing your planning run and I'm sure the PDS will be selected as a source of supply in any of the valid versions.
    If you still have any issues, then /SAPAPO/VERSION_COPY_TRANS should help you to copy the PDS from 000 to any other versions.
    regards,
    Srinidhi

  • Is it possible to delete all PIR's on inactive Version basis

    Hi All,
        We need to delete all PIR for our Inactive version.  If we use md74,75,76 its deleting based on keydate which is global plant based setting. But our requirement is to delete whole inactive PIR on version basis. Is it possible to do it.
    Thank you
    Muthu Kumar

    Hello Muthu,
    You can do it though MD62 too,
    Requirement Plan =  *
    Enter your Plant  =
    Select your inactive Version
    Date Balnk
    Next screen select all and delete them you can also use MD74/75 by entering all inactive version means exclude version 00 from selection.
    Best Regards,
    R.Brahmankar

  • More inactive versions of one program

    Hello,
    is it possible to have more inactive versions of one program/dictionary object? How to save them and work with them?
    Example: I develop something and do not know which solution is the best. I consider 2 solutions and need to do some test for comparison. I have solved it with a new programm with a different name till now.
    Thanks for your hints,
    Radek

    Hi
    The system can create a version of abap object only if it's assigned to package, i.e. it's not a local object.
    The system inserts the object in a change request as soon as it'll be changed.
    The version will be created as soon as the request is released.
    So only one version can be used, if it needs a old one it has to restore it.
    Max

  • Transfer DP forcast to ECC in Multiple Inactive versions

    Hello,
    How can I transfer DP forecast data to ECC every day with a different Inactive version as I have a requirement to have snapshot of the demand data for last one week in ECC. Below is the requirement. Can we acheive this requirement with the standard transfer or do I need to use any user exists on the ECC side. Please help
    Forecast
      Transfer Date
    Version
    4/6/2015
    01
    4/7/2015
    02
    4/8/2015
    03
    4/9/2015
    04
    4/10/2015
    05
    4/11/2015
    06
    4/12/2015
    07
    Thank You in Advance
    Regards
    Srikanth

    Thank you Ada...
    If I set different jobs with transfer profile on each week day do you think it will override the inactive version when I ran the same job next week. for example..
    I have created a job set with a Inactive version "01" and that job runs on every monday. If ran the job on 4/6/2015 and same Job will be ran on 4/13/2015. Does forecast data which was transfered on 4/6/2015 will be over written by forecast data that will be transferred on 4/13/2015 as this will have same inactive version?
    Thank you in Advance.
    Regards,
    Srikanth

  • Transport request failed-inactive version of query element.

    I have transported 70 reports from BI development to production.
    the request has failed due to inactive version of the query element.
    How to find which report the query element belongs.
    Please advice how should i troubleshoot this issue.

    Murali, check this table :RSZELTXREF
    enter the element name in field TELTUID. Then from the result, select the value of field SELTUID and enter it as value of field ELTUID to check data of table RSZELTDIR.
    That will give you the query name.
    Regards
    Ashwin.
    Edited by: ashwin kumar on Apr 27, 2010 10:11 AM

  • After transported work flow changes, 2 new inactive versions generated

    Dear ABAP consultants,
    I have generated new version in my development system and saved under the workbench TR, then have modified my workflow changes and activated the active version and release the sub tasks of Workbench TR and ask my basis to release and Transport TR.
    After they imported TR, there is an error logs: Object type Z_proposal could not be generated.
    And in target system, 2 workflow versions got generated.
    Please help me on this.
    Thanks
    ANIL

    Thanks for reply.
    I have got issues and resolved. 
    -->  I have missed out event Linkage between BOR to Workflow.
    -->  And also Z_proposal having some error in quality system, because of one structure used in Z_proposal object not found in my Quality system.
    Regards
    Anil Dasari

  • Zcso_Doc_Proce_services====CCDFE does not have any Inactive   versions

    If copy the class form standard Class To Zclass  it comes the Error….
    when Check and Acivity this error come's
    Zcso_Doc_Proce_services====CCDFE does not have any Inactive   versions

    Dear shaik arief,
    1)Copy all related objects of the class to Zclass.
    2) Activate all although gives error.
    3)go to se80 -->Right click on class -> Check the syntax
    Probably this will solves the problem
    Regards
    Bhupal Reddy

Maybe you are looking for

  • SISS package output using DTEXEC command

    Hello, I need a help in executing SISS package using DTEXEC command Here is the command i use DTEXEC.EXE /F "C:\\excel_to_table.dtsx" /set \package.variables[filepath].Value;"C:\sample.xlsx" /set \package.variables[servername].Value;"000.000.000.0" /

  • My MCB Pro keeps booting when I switch it on after a shutdown???

    Hello Friends, My MCB pro (late 2011) was running perfectly on 10.8.2 for 2 months but yesterday i shut it down and when I shitched it on it kept on booting. After 10-15 minutes i had to switch it off by pressing and holding power switch. this happen

  • For all you folks trying to install a new DVD burner with no luck

    I just bought a Panasonic UJ 841 for my Toshiba A100. It contains BOTH master and slave firmware. I installed the drive and like most of you it disn't see the drive in the BIOS. I contacted the guy in Taiwan who I bought the drive from and he showed

  • IPad Not Charging w/ 10 watt non-Apple USB charger

    Yes, I've read that the iPad requires a 10 watt charger.  I have the original iPad 10W USB charger, and also a high quality 10W USB charger that came with my HP TouchPad. When using the TouchPad charger - which is rated for 5V @ 2A (10W) the iPad say

  • MAX cannot auto-detect my SCXI cards in my PXI-1011 chassis.

    I manually set up the SCXI-1140 cards and ran my labview program. The measured data was bad. I tracked down the problem and figured it was the chassis that had the problem. I wondered if the incorrect data was related to the auto-dectection problem o