Inbound Delivery (DESADV): How to transmit SLED/BBD and Manufacture Date?

Hello
We have another challenging task to solve. Here is the scenario (SAP Release ERP 6.0):
One Lindt company (supplier) sends an outbound DESADV IDoc to another Lindt company (Purchaser). Here the inbound DESADV should create an inbound delivery. Finally, the inbound delivery is replicated to the external WHS partner who does the Goods Receipt against this inbound delivery.
The outbound DESADV contains all logistical data including SSCC. In particular, the batches have a manufacture date (LIPS-HSDAT) and a SLED/BBD (LIPS-VFDAT).
SLED = Shelf Life Expiration Date
BBD = Best-Before Date
In the outbound DESADV the SLED/BBD is mapped by default into segment E1EDL24/VFDAT. For the manufacture date we implemented an user-exit.
How does the inbound delivery look like? The batch number appears as "Vendor batch". The SLED/BBD does NOT show up even though the inbound DESADV contains the date in E1EDL24/VFDAT. This inbound DESADV did NOT contain any controlling segment E1EDL19. Adding this segment (QUALF = 'VDT' = Shelf Life Expiration or Best-Before Date) had no effect.
Here is my assumption why the SLED/BBD does not show up in the inbound delivery created by the inbound DESADV:
Because we do not yet have the "real" batch (just the "Vendor batch") the system ignores any SLED/BBD. As soon as the external WHS partner sends the GoodsReceipt message (as inbound WHSCON ) the inbound delivery is updated with the "real" batch as well as the SLED/BBD.
QUESTIONS:
(1) Why does the SLED/BBD not show up in the inbound delivery created by an inbound DESADV?
(2) Do we need another user-exit to map the manufacture date into the inbound delivery?
Once again thank you for sharing your time and expertise with us.
Regards
Uwe

Apply SAP Note
Note 1576788 - Transfer of exp. date
(IDOC_INPUT_DESADV1) to inb. delivery
Here are the correction instructions for your reference:
=========================================
FORM DESADV_IDOC_PARSE
Delta001Context Block
        IF NOT t_dlgn-vbelv IS INITIAL.
          t_dlgn-posnv = s_dl24-posex.
        ENDIF.
Delete Block
        mv s_dl24-brgew t_dlgn-brgew.
Insert Block
        mv s_dl24-vfdat t_dlgn-vfdat.                         "n_1576788
        mv s_dl24-brgew t_dlgn-brgew.
Have fun!
- Joemil

Similar Messages

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy

How to print both normal and bold data in a single line

Hi ,
I have requirement wherin the data need to be displayed in a single line.
FAX: Z8525_text.
where FAX needs to be in bold and Z8525_text is a standard text and it shoould not be bold , both of this needs to be displayed in
a single line.
Can you let me know how to print both normal and bold data in a single line one of which is coming fro standard text.
Regards,
Senthil

Hi Senthil,
If you are using smartforms, have a character format created for BOLD and apply it to the text you want to highlight. The remaining text of the line could be applied with a Character format which is not highlighted.
Try and revert in case you need further assistance

How to fetch APPROVER NAME and approval date dynamically for an user

Hi all..
How to fetch approver name and approval date dynamicall for an user in an email template..
can any help me to sort out this pbm,i am new to IDM..
Thanks in advance..

Access policies get a static value. You can't populate a field with an adapter. If you must do this, leave the field blank, and put an adapter on the process form for your field that must be populated using code or logic.
-Kevin

I forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

i forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

Do you have a question? Is your iPad disabled?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to Record HTTP Requests and POST data

Hai all..
Can anyone help me to solve this issue..
How to Record HTTP Requests and POST data by using java..
regards
Ranjith Nair

You should read about TCP and splitting data stream into packets and learn how to understand packet header to assemble stream from packets.
Actually there are few different stages:
1. detect handshake to start new empty stream within your code;
2. detect subsequent packets and assemble stream (there are counters within packet header and they will help).
After creating start of TCP stream (usually 1KB is enough) you'll be able to detect is it HTTP request/header or no and start logging or ignoring packets for this connection.

How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?

I do enjoy using Mozilla's Firefox as my default browser, BUT, I don't enjoy the details of my life, to include my Internet activity, to be archived by Google, or anyone else, via Mozilla's/Firefox's sharing of my Internet browsing and/or search engine activity with any aspect or facet of the Google organization. With all of this said, my question is, "How do I prevent browsing and search data from being forwarded to Google by Mozilla, while still using Mozilla's Firefox as my default browser?"

Firefox's default behavior includes no automatic interaction with Google.
We do use Google as default search engine and to report web forgery in the 'help' menu, but no data are sent to Google without your knowledge, and you can change your preferred search engine at will.
However many websites themselves make use of Google Ads which do cause interaction with Google when you load the webpages. This is visible in status bar and happens in any browser. The [https://addons.mozilla.org/en-US/firefox/addon/noscript NoScript] add-on for Firefox can largely save you from this problem.
If you see things happening otherwise, please reply with details on what you see.

HT4305 HOw to delete my diagmostic and usage data on my ipad

HOw to delete my diagmostic and usage data on my ipad
<Re-Titled by Host>

my wife's name and password in the gmail page, how do we delete it

How to transmit color proofs and other settings without activation?

Hallo!
I crashed my computer weeks ago and installed PS CS2 at a new system with a new activation (earlier activations have been made because of hard disc changes)
The activation was ok but when I tried to load my color proofs made at the first computer I was asked to make a new activation.
Is there any possibility to use the proofs without a next activation? (I´m not sure if I have a new one left)
Please help
Anna

Anna,
Your situation would be a good one to call Adobe Tech Support (installation issues are free). They can tell you how many activations you have, and help you get up and running.
Hunt

How to display the username and current date in OAF page Footer region

Hi,
I need to display the username and Current-Date in footer region.If anybody knows the procedure then please share with me.
Thanks
Divya Agarwal

Hi,
Read this Thread:--
You have to capture the UserName and Date in the Process Request Method of page Controller and invoke a method which will subsequently get and set the value in some attribute.
String userName = pageContext.getUserName();
How to populate Current Date and Time in OAF page through CO
Thanks
--Anil

How to save user name and system date in a table

I have a form that allow users to enter some information...
I want to save user name in one of the columns and system date in another column by default when the user submit the form to save data...
Please advice...
Thanks

Hi talbo,
The most reliable method is to use a before-insert trigger on your table. This way the columns will be set properly no matter how rows are inserted (via your app or any other means). Given your user name column is called "CREATE_USER" and your date column is called "CREATE_DATE" for example - include these lines in a before-insert trigger:
:NEW.CREATE_USER := NVL(V('APP_USER'), USER);
SELECT SYSDATE INTO :NEW.CREATE_DATE FROM DUAL;The NVL(V('APP_USER'), USER) will set CREATE_USER to the current ApEx application user if the row is created from within the application, or to the current database user if the row is created outside the application.
Hope this helps,
John
If you find this information useful, please remember to mark the post "helpful" or "correct" so that others may benefit as well.

How to remove author name and/or date from blogsite summary

Hello,
Can someone please help me find how and where to remove the author name from the blogsite summary?
I don't want any author name listed, just the linked title of the blog post and the date posted.
Or, is it possible to have the linked title, with 50 words of article displayed, but no author name or date created?
Thank you very much in advance!

Yes, thank you.
The site is still temporary: http://sculpturebythelakes.businesscatalyst.com/index.html
The "Latest News" box on the right hand column.
Ideally, I would like a linked post title, a return <BR> and then a set quantity of words below with "read more" following.
It seems there should be a template to edit, but I've gone through everything I can find in BC backend, and looked at every tutorial I can find (they are all very general, just getting started stuff) and can't figure it out.
Any help is greatly appreciated.

How the prodution order start and finis dates are changeing...?

Dear friends,
It was observed that one of my client's production order start and finish dates are changing frequently.
No user is claiming the responsibility, I feel very dificult to to find out who did the changes.
When I observed, it is happening for orders if we Revert the Teco, and that to for those orders which doesn't have the sale order assignment.
and some times it is not happenign for even for the orders which does not have the sale order assignment also.
Here it is having Forward type Sheduling.
Please help me how and when , the prodcuction orders start and finish dates will get changed.

Dear RS,
Plz check in AUT10, by giving t-code CO02 for order changes
in AUT10, u can track user id also
this may help you to some extent
Regards
kumar
Edited by: kumar kumar on Sep 17, 2009 8:32 AM

How to achieve the from and to date range in report builder 3.

I AM TRYING TO CREATE ONE REPORT FROM REPORT BUILDER 3.
WHERE I AM UNABLE TO DEFINE THE DATE RANGE.
HOW TO ACHIEVE THE DATE RANGE IN REPORT BUILDER.
NEED FROM DATE AND TO DATE FILTER IN REPORT BUILDER FOR PK DATE.

Hi Ganesh,
According to your description, you create a report in Report Builder 3.0, and create two parameters FromDate and EndDate, now you want to use the parameters in your MDX query, right?
If in this case, here is a sample query for your reference.
select
{[Measures].[Internet Sales Amount]
} on columns,
{[Date].[Date].members} on rows
from(
select
STRTOMEMBER("[Date].[Date].&["+@StartDate+"]"):STRTOMEMBER("[Date].[Date].&["+@EndDate+"]")
) on columns
from [Adventure Works]
Reference:STRTOMEMBER
Regards,
Charlie Liao
TechNet Community Support

How do I delete diagnostic and usage data on my iPad 3 please

Hi, I am very new to iPad/Apple (sorry), have been operating with Windows for so long now, and have recently bought a new iPad 3 Wi Fi Cellular.
I was wondering around my iPad yesterday and noticed under > Settings > General > About > Diagnostics and Usage Data > Data - pages of apps
I had downloaded and tried out etc, and than deleted those apps - no longer using them, but all this information is still on my Data page.
Could you please tell me please how to delete all this data, I have tried unsuccessfully. I have deleted a great many apps, but the data is still there - I would like to know how to clear or delete the diagnostic and usage data please?
The other question I have is that all this data must be taking up kb/mb/space on my iPad.
Thank you so much for your help and advice ~ greatly appreciated.

FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Inbound Delivery (DESADV): How to transmit SLED/BBD and Manufacture Date?

Similar Messages

Maybe you are looking for