Inbound delivery - external ID in MM Good Receipt  material document

Hi,
during  good enter of an inbound delivery through SD trx VL06IG, the system copyes the Inbould delivery number LIKP-VBELN in field MKPF-XBLNR .
How can I do in order to copy the External Vendor identification LIKP-LIFEX  in field MKPF-XBLNR  instead of LIKP-VBELN?
Thanks
Fabrizio

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Similar Messages

  • Asset number belongs to Goods receipt material Document Number

    Hi,
      I Created the Goods Receipt thru Internal Order, and i created the Goods receipt.
    After creation of asset, is there any way to retrieve the
    asset number belongs to Goods receipt material Document Number.
    Regards,
    Kiran.

    hi,
    use tcode ME2K
    A.

  • VL32N Change inbound delivery quantity after a partial goods receipt

    Dear.
    I have created an inbound delivery using VL31N from a purchase scheduling agreement.
    I have executed a partial goods receipts using MIGO for the inbound delivery.
    I need to reduce the delivery quantity for the inbound delivery using VL32N but the system donu2019t allow to change the delivery after a goods receipt.
    How can I proceed ?
    Thanks for your help.

    Hi,
    When a (partial) goods receipt has been posted to an inbound delivery item, the possibilities to change this item are restricted.
    If the delivery quantity is the same as the goods receipt quantity, then the item is fully posted goods receipt. No change of quantity is possible.
    If the delivery quantity is still higher than the goods receipt quantity, you can create one or several new TO's for the rest and
    confirm, if needed, with differences.
    You have also the chance to adjust the delivery quantity to the picked (and already posted) quantity with VL32N and menu:
    Edit => Copy Putaway Quantities as Delivery Quantities
    Please also have a look at note 796053.
    Hope this can help
    Regards
    Mauro

  • Goods receipt, material document text

    Hi,
    how can I set from customizing that when I post a goods receipt, the vendor number (MSEG-LIFNR)
    must be copied in all the item position text ?
    Best regards

    The vendor numbeer is automatically copied onto the line item vendor field when you do the GR with reference to the PO.
    This is achieved from the copy control rules in for PO in customising and is stanard configuration.
    Let us know the exact scenario and error, if any.

  • Commercial invoice number and Goods receipt Material document

    Hello,
    Can any one guide me for the following...
    we need to develop a report where we need to track the For each good reciept number the corresponding invoice number...
    Thanks
    Raheem

    Hi
    While doing GR use delivery note number.
    The same you follow for Invoice verification also. With ref. to delivery note you do the IV.
    Then i feel it will be esay to correlate the GR and IV.
    Regards,
    Raman

  • Goods Receipt Material Document Amount in LC

    All:
    I am working in ECC 6.0.
    Sometimes the GR Material Document Amount in LC is not calculated as expected. In some instances, the Amount in LC uses the PB00 amount instead of the expected Net Price (which is adjusted for copper). I have not been able to figure out trends in when the Amount in LC is calculated as we would expect and when the Amount in LC is not correct.
    I do strongly believe this is not related to currency conversion as we are dealing with USD in all of the currency fields.
    Can anyone please explain: How the Amount in LC is calculated (what fields/dates are part of determining the Amount) & Why we are seeing a discrepancy of how the Material Document Amount in LC is calculated?
    Has anyone experienced the same issue? How did you resolve it?
    Thank you in advance for your assistance.
    ~Stacy

    are you following the approach given in OSS Note 24738 - Precious metal surcharges in Purchasing ?

  • GR/IR Clearing-Good Receipt Accounting Document issue-no cost center / IO

    Hi All,
    For the GR/IR Clearing Account, users did  the Goods Receipt. GR document post to FI and created Accounting Document. When we look at GL line item display of GR/IR clearing account (FBL3N), we cannot see the cost center or internal order on Goods Receipt doucment ( document type WE).
    When we look at Invoice ( document type RE), we can see cost center or internal order on invoice accounting document. 
    Anyone know how to capture cost center / internal order from Goods Receipt to FI accounting document during GR time ?
    Thank You
    Alex Lee

    Hi,
    Indeed, during the invoice inscription, the information regarding cost centre (or other CO object) is stored on GR/IR account, even (see the explanantion in note 27881). However, for GR there is no standard solution. You can try making a substitution (OBBH), taking the cost centre from the expense line and putting it on GR/IR as well. I doubt, though, if SAP allows GR/IR line item to be changed by substitution...
    Additionally, please check note 378800.
    Regards,
    Eli
    P.S. Please, see your thread in FI. Try avoiding cross-posting.

  • Why inbound delivery for when  i click "goods movement tab" still A

    Hi
    Please clarify my doubt. I have a PO for which i did inbound delivery and did goods receipt through MIGO also for entire quantity. My doubt is that when i display inbound delivery after all this process and click on "goods movement tab" why the status still shows "A" not started instead of "C" i.e complete inspite of GR done for full quantity. Is there any setting. Please clarify this.
    Dinakar

    Hi
    Please check  how you did MIGO wrt to PO or Inbound delivery i.e. Shipping notification
    Please check your PO details and config of SN
    Kishor

  • Delivery completed indicator set still goods receipt can be done

    Dear SAPians,
    I have created a P.O of say 100 quantity against which i made a goods receipt of 50 quantity.
    After this i have set the delivery complited indicator in P.O but still i can make goods receipt.
    how do i stop these the GRNs
    Regards
    Sujit

    Dear Sujit,
    Just as what Kedar said, Delivery Complete is just an "indicator". It is used for MRP planning purposes and you can still perform receiving even with this indicator checked.
    To block receiving there are 3 ways to do it, i would recommend no.1.
    1) Change the quantity according to receipt quantity.
    2) Set the lock button for the particular line item, which is proposed by many in this forum. However i think it is not the right solution because, you will not be able to do Invoice Verification(MIRO) after setting the lock button! It also doesnt look nice.
    3) You can use Final Delivery field (set it to today so no further receiving can be done). But you also need to configure system message M7163 to Error for this to work. SAP default only sets this to Warning, where you can still proceed.
    Hope this helps.

  • Final delivery indicator unset after underdelivery good receipt.

    Hi, If the final delivery indicator is set in the purchase order SAP allows good receipts and then unset the indicator, only if the quantity in the purchase order is equal to the quantity receipt, SAP set final delivery indicator. The user want to set the final delivery indicator to close some purchase orders with underdelivery quantity.

    Alejandra,
    You can advise your user that the delivery completed indicator is not designed for this purpose.
    If the user wishes to prevent further receipts against a Purchase order, for any reason, he should block the item rather than rely on the DC indicator.
    ME22N for the order, select the item; hit the 'lock' icon; or Edit>Block.
    This transaction is reversible.
    Regards,
    DB49

  • Goods Receipt Acccounting document considers  condition price from PO

    Hi,
    During Goods Receipt with reference to an old PO, the accounting document created considers old overheads condition price from PO and not the updated condition price from condition record (Transaction MEK1) which was subsequently changed after creation of the PO.
    Please advise how the accounting document should consider the updated price (MEK1) as on date of creating the GR.
    Thanks and Regards,
    Pratap Mukund Shetty

    Hi Pavan,
    You are right. But we are unable to save the PO with catg 5 as the gross price is pbxx (manual entry) .Our requirement is for the additive cost conditions we have for overheads mantained in MEK1 and in pricing schema show that they are picked up in the PO. At the time of GR if these condition prices were changed it should consider the updated price in GR accounting document but presently it picks the previous price from PO.
    If PB00 is mantained  and picked from info record   then the price date catg works.. But most of our PO's have PBXX (manual entry). How do we address this.
    Regards,
    Pratap

  • Problem when Add Serial Number for Goods Receipt PO Document

    Dear All,
    In my App I have function to Add goods receipt PO and Serial for these items of this document as code bellows:
    oGrp = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                'Add Header Goods Receipt
                oGrp.CardCode = "CC1"
                oGrp.CardName = "Card Code 1."
                oGrp.DocDate = now
                oGrp.DocDueDate = now
                oGrp.TaxDate = now
                Dim Qty As Int32 = 2
                For i As Integer = 0 To Qty - 1
                    oGrp.Lines.SerialNumbers.SystemSerialNumber = 1
                    oGrp.Lines.SerialNumbers.ManufacturerSerialNumber = "MSR01" & "-" & i
                    oGrp.Lines.SerialNumbers.InternalSerialNumber = "ISR01" & "-" & i
                    oGrp.Lines.SerialNumbers.SetCurrentLine(i)
                    oGrp.Lines.SerialNumbers.Add()
                Next
                oGrp.Lines.ItemCode = "YMY2H-BLACK"
                oGrp.Lines.ItemDescription = "My Item"
                oGrp.Lines.Currency = "USD"
                oGrp.Lines.Quantity = Qty
                oGrp.Lines.Price = 10000
                oGrp.Lines.DiscountPercent = 0
                RetVal = oGrp.Add()
                If RetVal <> 0 Then
                    oCompany.GetLastError(ErrCode, ErrMsg)
                    Return -1
                Else
                  End If
    When Add this document I have Error : "You should use existing serial/batch numbers for this document type ". Please help me fix this problem. In my SAP doesn't have Serial for these item. Please let me know How to add serial master data?
    Thanks & Regards

    Dear,
    Thanks for your support but when I chaged code as bellows:
    oGrp = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                'Add Header Goods Receipt
                oGrp.CardCode = "CC1"
                oGrp.CardName = "Card Name."
                oGrp.DocDate = MyArrContainDocInfo(2)
                oGrp.DocDueDate = MyArrContainDocInfo(3)
                oGrp.TaxDate = MyArrContainDocInfo(4)
                Dim Qty As Int32 = 2
                oGrp.Lines.ItemCode = "YMY2H-BLACK"
                oGrp.Lines.ItemDescription = "My Item"
                oGrp.Lines.Currency = "USD"
                oGrp.Lines.Quantity = Qty
                oGrp.Lines.Price = 10000
                oGrp.Lines.DiscountPercent = 0
                For i As Integer = 0 To Qty - 1
                    oGrp.Lines.SerialNumbers.SetCurrentLine(i)
                    oGrp.Lines.SerialNumbers.SystemSerialNumber = i
                    oGrp.Lines.SerialNumbers.ManufacturerSerialNumber = "MSR01" & "-" & i
                    oGrp.Lines.SerialNumbers.InternalSerialNumber = "ISR01" & "-" & i
                    oGrp.Lines.SerialNumbers.Add()
                Next
                RetVal = oGrp.Add()
                If RetVal <> 0 Then
                    oCompany.GetLastError(ErrCode, ErrMsg)
                    Return -1
                Else
                              End If
    I have the same Error: "You should use existing serial/batch numbers for this document type". I try config in Gerneral Setting Form as image bellow: [http://www.hoanghaicap.com/GS.png|http://www.hoanghaicap.com/GS.png]. Please help me fix this problem. I try Add Goods receipt PO with items manage by Serial it's OK but by SDK it's not OK.
    Thanks & Regards,
    Edited by: Tao lao on Mar 10, 2010 2:44 AM

  • FM / BAPI Inbound delivery creation for a Purchase Order without material

    Dear All,
    I have a requirement to create a Inbound Delivery for a Purchase order without material number. The Purchase Order has only Material text and no material number. Please let me know a BAPI or FM to create inbound delivery in this case where there is no material defined on PO. I require BAPI / FM  since I have to make a web-service for the same.
    Thanks in advance!
    Abhishek

    Hi I did a coding in one of the userexit. If ekpo-matnr is empty then fill
    KOMDLGN-UMVKZ = 1
    KOMDLGN-UMVKN = 1
    KOMDLGN-MEINS = EKPO-MEINS
    This parameters i.e. Qty conversion are necessary and since MATNR does not exists it has to be filled.

  • Deleted Delivery Unable to do the Goods receipt reversal

    Hello Experts,
    Instead of deleting the particular delivery line items, user has deleted the STO delivery completely by using VL02N transaction code. Now in the purchase order history we have only GR and invoice document related to STO. (We already reversed the billing and deleted the delivery)
    Now we are unable to reverse the GR and getting the error "Delivery cannot be updated". This error because of the deleted delivery.
    Please advice how to proceed further. Now the overall from accounts it is showing imbalance.
    Please note, we are doing STO between company code to company code.
    Regards
    Rifaie M

    Satish,
    From you, i understood that for cancelling the GR i have to give delivery number reference.
    But in my case the delivery number itself deleted. I do not have delivery number in purchase order history. This has been deleted by the end user by mistakenly.
    Please advice
    Regards
    Rifaie M

  • "Goods Receipt List " document for production orders

    Hi Experts,
    I have a requirement where in I have to pick up the Header part from the standard form PSFC_PRINT_LAY  and concatenate it with 'Main Details' ?(item data) part which is picked from standard form PSFC_STD_LAYOUT. Can anybody tell me what is the best way to achieve this requirement.
    Whether I should use one of the standard form copied as a Zform and attatch the other part or is there any other of doing this.And also please let me know the transaction where this form is been triggering.
    Thanks in Advance,
    Esh.

    >
    KUMAR.S. wrote:
    > Hi Experts,
    >
    > I have a problem in MTO scenario with Collective production orders for all production orders are stopped due to this because unable to do GR for child items in collective orders.
    >
    > Collective Production Order is as follows,
    >
    > 20053566 - Production Order for Child Material (BFXu2026)
    > 20053567 u2013 Production Order for Header Material (INXu2026.)
    >
    > Also in (COGI) If I enter the sales order and plant we found the below error ie,
    >
    > Dependent goods movement was in correct (this error refers to 20053566)
    > CO Account Assignments have different profit centers (this error refers to 20053567)
    >
    >
    > Please guide me to fix this issue.
    >
    > Cheers,Kumar.S
    Kumar,
    Though it is not very clear, but I suspect that the sales order is assigned with a Profit center, which is different from the one which is assigned to the material master costing view of material 20053567. I better suggest you take the help of FICO guy in this regard.
    Regards,
    Prasobh

Maybe you are looking for

  • Adobe audition cc crashes after a few times of recording(please help)

    Okay so Adobe audition is incredibly useful or should i say WAS... It was great until one day it just crashed after a few times of recording. I just thought maybe something went wrong whatever ill re do it. But no.. for months ive been trying, uninst

  • How do I get back to Firefox 37, can't use dashline with 38

    Dashline tells me not competable with Firefox 38, is there a fix for this?

  • Built in isight crashing imovie

    Everytime I capture something using the built-in isight I get this error message. What's more video no longer works with Skype (dispite complete re-install). Process: iMovie [330] Path: /Applications/iMovie.app/Contents/MacOS/iMovie Identifier: com.a

  • How do I stop my excel documents opening up in ITunes

    My Excel and Word documents are opening automatically In iTunes when I open my Windows Vista laptop. Infact all my documents seem to be quickly transferring themselves into iTunes, so I cant open them at all. H. When I open an Excel Document that has

  • Placing large images in Illustrator CS5 - Crash

    Hello. I'm producing an artwork, working in high resolutions. The new artboard functions in Illu CS5 is really great for my purpose, but when placing my photoshop images (around 25K x 15K), Illustrator crashes almost every time. The only format, that