Inbound Delivery not getting transferred to GTS

Hi Experts,
We are presently implementing GTS 7.2 Customs Management in my company and we are experiencing this issue. Here are steps completed for the document transfer.
1. GTS plugis are activated for the Inbound Delvieries along with other documents.
2. All the basic configuration is also complete in the GTS system.
When we create a inbound delivery in ECC 6.0, it is not getting transferred to GTS. But when I go set the incomplete check buttoen either at header or line item level of the delivery, then it is immediately transferred to GTS.
I checked all the config related to incomplete procedure for SD/MM documents in ECC. I am able to see the green light automatically set (after the config VI29 and VI49) at the header/item level but still incomplete set is not automatically set. Can you please help to find are there any other config which needs to be done to make this inbound delivery automatic. I understand there is a user exit for this, but I would like to accomplish without userexit.
Thanks in advance.
Vijay.

Hi Vijay,
Ok, that's a lot clearer - thanks.
I'm fairly sure that those "SET" buttons have no influence on the transfer of the Inbound Delivery to GTS.  And, as far as I know, they have no internal functionality - the toggling buttons are provided just so that you can flag manually if required for some reason.  My guess is that making ANY change to the Delivery would have the same result.
The other question I should have asked is; why are you trying to transfer the Inbound Delivery?
- compliance checks?
- transit declaration?
- customs declaration before GR?
That's to say; what gets created in GTS when the Delivery transfers?
Best regards,
Dave

Similar Messages

  • Outbound Delivery Not getting created

    Hi Gurus,
    Outbound Delivery Not getting created
    there is a DESADV IDOC that is supposed to create inbound dely, do the GR then create Outbound delivery and shipment (all automized). But this is not happening.
    There is workflow set up that is blocking this...Task no TS95000019 is responsible for passing the values. This will show up in the SAP inbox with error description.  But i am able to see TS95000018 but TS95000019 is not showing up in the workflow log.
    Can anyone let me know what setting is missing in workflow so that this task shows up and i can make the system create outboud delivery and shipment automatically
    Please help
    Sunil

    Sunil
    First check whether that particular task is active in your client.
    For a task to get triggerred you need to activate the triggerring settings.
    Use PFTC T-code, input your task as TS and ID as 95000019
    click on view button
    Then click on " Triggerring Events" tab page.
    View whether your task 95000019 is active. Green light will appear next to it in the left most column. If it is grey or red, then you need to change it to green. Only then it will work. Once this gets triggerred, subsequently it will pass the message to your inbox with correct error message and then only create an outbound delivery.
    Hope this will help you out !
    Regards,
    Syed Nasir

  • Master recipes operations not getting transfered in SNP PDS to APO from R3

    Hello APO Gurus,
    I am trying to transfer SNP PDS for master receipes from R3 to APO.
    Issue description::
    The operation is not getting transfered correctly , some system default operation "010 generated Operation (from Planned Delive)" is getting generated in APO, also activity and resource capacity is not getting transfered. This situation exist for one plant 1000, for other plant 1100 the SNP PDS created correctly.
    i have following points:
    1. Is there some customizing setting missing on R3 or APO side  for plant 1000 tbefore SNP PDS transfer
    2. What need to be checked on master recipes data in R3,
    i have checked on below points
    1. FG Materials and all the Component Material to be in APO in a Active Integration Model.
    2. BOM & Routing and Production Version setup correctly.
    3. The Routing Operations have to Relevant to 'SCHEDULING'.
    4. Try deleting the existing Integration model for materials & re-create new IM & activate.
    Please help me to send SNP PDS correctly to APO to take heuristic run.
    Regards
    Gajendra
    Edited by: Gajendra_APO on Aug 23, 2011 1:14 PM

    Hi,
    It is good that you have given your already checked points.
    Please check the following things also and try to retransfer the PDS.
    1. Check your resource in ECC, whether you have maintained the Process formula.
    2. Check you have maintained some values in Master Recipe for processing time
    3. Check whether the resource has been transferred for your plant 1000 to APO and an active IM exists.
    4. Also check the type of the resource transferred to APO. It should be a single-mixed/ multi-mixed or bucket resource.
    Hope this will help you to solve the issue.
    Regards,
    Manimaran M.

  • I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

    I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

    While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

    @ melfromvictoria
    Have you tried right clicking on the 4s and select "restore from back up"

  • Playlists containing songs with titles starting with non-alphabetical characters do not get transferred at all

    I was really happy about how the desktop manager lets me choose the songs from my itunes library by playlists! this is smart! I'm also happy to see the playbook render asian characters properly (unlike my experience on the bold!)
    However, I have a lot of songs which have titles that begin with non-alphabetical characters, ie asian characters. For all playlists which contains such songs, those songs do not get transferred onto the playbook AT ALL. For example, I have one playlist which contains only songs with titles beginning with asian characters - this playlist was transferred but it is shown as containing zero songs! When I browse my song library by artist/album, I can find all those songs that should be in that/those playlists.
    Can this be fixed?
    thanks.
    Solved!
    Go to Solution.

    as it turns out, it kind of got fixed by itself. what i did (i think, since i have not definitively verified) was i went to browse "all songs" wherein i noticed all thoses songs starting with asian characters seemed to show correctly. then i went back to the playlists in question, and viola!
    clearly there is a bug or two in the music player somewhere regarding these title characters. but rim has more urgent things to resolve i guess - like my auto screen lock is still not working!

  • PO Release strategy workflow not getting transferred

    Hi All,
    I have done all the configurations related to PO release strategy workflow but when transferred to Quality certain configuartion done in PFTC workflow builder are not getting transferred.
    I also got message like 'release of purchase order transferred to buffer'.
    Please guide.
    Thanks in advance
    Pavan H S

    Hi,
    In QA
    1) Go to SWU3 check Workflow Configuration Done or not
    2) Execute the workflow in SWUS and check it
    3) If it working, test the workflow it via T.code SWUE, If not working then workflow is deactivated
    4) You have to move the Workbench Transport Request first,  then you have to Move customizing Transport Request.
    Regards,
    Surjith

  • Workflow configuration not getting transferred

    Hi All,
    I have done all the configurations related to PO release strategy workflow but when transferred to Quality certain configuartion done in PFTC workflow builder are not getting transferred.
    I also got message like 'release of purchase order transferred to buffer'.
    Please guide.
    Thanks in advance
    Pavan HS

    Hi Santosh,
    What settings I have to do in PFCG. User is able to release PO in ME29N.
    Thanks and Regards
    Pavan

  • Plan Driven Procurement - PR not getting transferred

    Hi Experts,
    << Moderator message - Everyone's problem is important. Please do not ask for help quickly. >>
    We are on SRM 5.0 , ECC 6.0 ,Extended Classic Scenario.
    I am trying to setup PDP in SRM.
    RFC connections have been setup.
    The required entries in the tables V_160PR and V_160EX have been maintained and mapped for the required Logical sys and Material grp.
    I created a Local Company code and inside it i have created Local P.Org and P.grp and assigned the RFC user.
    The required attributes have been setup as per the config guide.
    I have 2 issues here.
    I have 2 PR's which were generated from MRP .
    Issue 1:
    For one PR , when i run BBP_EXTREQ_TRANSFER , i can see the PR gets transferred indicated as '1' but in SMQ1 (outbound Queue of ECC ) , i see the Queue stuck up with the status "ANORETRY".
    I checked the SLG1 log in SRM and i have 2 errors
    1. User not Responsible for Purchasing Group of given Material
    2.Transaction type for local system missing.
    I created a Local Company code and flagged it as Company because i was getting an error"No address found for partner function type Ship-To Address" initially . I went through forums and per the suggestions i could resolve this error by creating the Local Company code but now i get the error "User not Responsible for Purchasing Group of given Material" in place of that.
    I have initially tried with ECDP and later with ECPO but no use.
    In BBP_PD, i see no Shopping carts that got created.
    Issue 2:
    Except the above PR, if i run the BBP_EXTREQ_TRANSFER report for any PR that i created later, the PR doen't even gets transferred . We are not maintaining EPRTRANS table so i dont see any entries there.
    For this issue, i see nothing in SMQ1,SLG1.
    What could be the probable reasons as why it is not getting transferred. And why is it that the BBP_EXTREQ_TRANSFER report is working for only the 1st PR and not anything else.
    Any Ideas, clues...pls ...
    Thanks,
    Addy
    Edited by: Rob Burbank on Dec 6, 2010 4:08 PM

    Issue Resolved.
    Thanks,
    Addy

  • I have two monthly scheduled iTunes allowances scheduled for my kids.  For some reason they did not get transferred to their accounts this month.

    I have two monthly scheduled iTunes allowances scheduled for my kids.  For some reason they did not get transferred to their accounts this month.

    @Dakotaep
    I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3!  This definitely should have been resolved in your first call to us.  I would be glad to review your account and ensure the Edge Agreement is corrected.  Please accept my "Follow" request and send me a direct message so I can further assist.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter VZWSupport on Twitter.

  • How inbound delivery will get processed in receving plant in stock transfer

    Hi,
    We are doing a stock transport scenario with one step procedure. Can you please confirm whether following things are possible ?
    1.With one step procedure stock transfer we want good receipt to be posted in receving plant automatically after good issue from supplying plant.This is happening after you select indicator of one step.
    But will system post GR if inbound delivery is posted in receving plant when you set up one step indicator?
    2.We tried to create inbound delivery in receiving plant but we are getting error of " Vendor account number & vendor address indicator". If you go to see technical details it shows these entries are to be in VBPA table.We maintained all  entries in vendor master but still we could not create inbound delivery. We are creating inbound delivery to check whether system post GR with one step procedure.
    Please reply.
    Regards,
    Prashant

    You are abosolutely right if plants are near one step procedure is used. Here the case is same.
    But client  mentioned shipping notification relation ship between two plants.Do you think is it possible?
    I am able to create inbound delivery without vendor name in field in inbound delivery. When I PGI'd  delivery it has post GR in receiving plant but inbound delivery remained open.
    Please comment.
    Thanks for reply.
    Regards,
    Prashant.

  • Does the inbound delivery date get updated in the Purchase Order?

    Dear Experts,
    Here is the use case, The original delivery date in the purchase order is 01.11.2011. Accordingly, the supplier sends an ASN to my client against the PO with the same delivery date. However, now, store keeper of my client wants to receive the stock on 03.11.2011.
    1) Can the store keeper/ goods recipient change the delivery date in the corresponding inbound delivery document to 03.11.2011?
    2) Will the change of the intended delivery date be notified back to the supplier who has triggered the ASN?
    3) Will the new delivery date be updated back in the purchase order?
    Point 3 is particularly important for the client from vendor evaluation point of view as any delay from the client side should not affect the vendor performance for ontime delivery.
    Thanks in advance,
    Ranjan
    Ranjan Sutradhar

    for point 2 not the dates wont be sent back to supplier untill unless you have any logic writen for that and if there is a Interface designed for it and I dont there will be any since ASN is sent from Vendor and if you are changing the dates in ASN .
    for point 3 no its not going to change the delivery date in PO at item level but at the item detial level in PO history tab the scheduled date and delivery date as per ASN will be mentioned
    its better you run the case in system and check it....this wont take much time

  • Buss.Area not getting transferred to invoice list

    Hi Gurus,
    hope u all r doin good outhere, i have an issue with bussiness area not getting populated or transferrred for Invoice list that are released to accounting .
    the scenario here is: in the accounting overview under the Billing Invoice(VF03) we are able to see the buss area against the customer acct line item and the GL acctline item, but when we go into the Accounting overview under Invoice List (VF23), the Buss area is not getting populated against the Customer lineitem..., we are not able to figure out what is missing...is it in the configuration...,
    we are on 4.6 , and we have an OSS note 69499 (given below) on this issue which says
    Summary
    Symptom
    Business areas are not transferred for invoice lists that are released to financial accounting.
    Additional key words
    GSBER TVTA VF21 SAPMV62S factoring discount
    Cause and prerequisites
    This was not programmed
    Solution
    A solution is only available in the standard system as of Release 3.0D.
    You can make the attached advance correction that uses a user exit.
    In this solution, the business area is copied from the sales area table (TVTA) for the sales area of the invoice list header. A business area determination on plant/division level (T134G) is not possible because the item information of the individual billing documents is no longer available in the invoice list.
    Source code corrections
    and we have contacted SAP , some one from SAP side told that the program is existing in that userexit already with our 4.6c,
    someone has suggested that in OB65 the check box is not activated against the comp code i use, but i have found that to be the check mark for the financial statements at the buss area level..will that make any diff to my issue... is it something with the FI part or SD part which do you think is incorrect ....any kind of suggestions pertaining to this issue .here would be helpful.
    some body please throw some light on it, i would be very much grateful.
    Thanks in advance
    Jay

    Hi Laxmipathi sir,
    as you said i went in the bussiness area account assignment and checked it and foound that the Sales area, distributin channel and division are assiogned to rule called 003 -Buss Area Det.from sales org/dist.channel item div.
    but there are other two.which were not assigned.
    001-buss area det.from plant/dividion(T134G)
    002-buss area det.from Sales area (TVTA).
    so do you think this is the reason it is not picking it up in the invoice list,
    i have discussed with one of the SD person here he said even though you don't assign them it shoudn't bother because the buss area is getting picked in invoice
    so could you please tell me what should i ask that person or what i have to tell them about this.
    thanks
    Jay

  • Multiple items not getting transfered from Punch out

    Hi,
    I need your help in fixing an issue with punch out.
    When we select more than one item in the punch out and when it is getting transferred to SRM shopping cart, we could see only one item in the shopping cart. We are facing this issue with only one punch out.
    While trasnfering item(s) from this punch out, we are getting the message "Number of external bid is empty" in SLG1 log. I have checked the XML file sent by the punch out and there I could see all the items that has been selected. But once it gets transfered to SRM shopping cart, it is transfering only one item.
    Not sure if this is a problem in SRM or punch out. If it is a problem in SRM then I hope it should occur with all the punch outs. But we are facing this issue with only one punch out.
    I am trying to debug this process in SRM. For that I need to know the exact BADI or BAPI which is receiving the items from punch out. Could you please help me in that?
    Also I would like to know, is there anything would happen after the XML file has been generated in punch out and before it has been received by OCI.
    We are in SRM 4.0 with extended classic scenario.
    Thanks,
    Arun

    Dean,
    We have implemented that BADI. As I mentioned earlier, problem is occuring with only one punch out we are using. With other punch outs it is working fine. More over, when I tried to debug through this BADI I am getting a dump error:
    No additional external fashion for New ABAP debugger available
    What happened?
    The ITS services u201Ebbpsc03" had to be interrupted because the WebAs sent the following error message. 
    Error message:  "No additional external fashion for New ABAP debugger available".  Message type:  "E"
    Error analysis
        It became receive an error message of the WebAs.  For the reason picture of the error message (program:  u201ESAPMSSY3" Dynpro number:  131) no Template was found, must interrupted become the ITS services
    therefore.  Remove if possible the mistake cause.  First if the mistake cause is removed and therewith the error message is sent by the WebAs no longer, again lauffähig is these ITS services. 
    Do you have any idea what the dump is?
    Thanks,
    Arun

  • Exit Class for Inbound Mail not getting triggered

    Hi Gurus,
    I have created an exit class for processing the Inbound Mail that comes to SAP Inbox (SOIN).
    I have set up the Inbound processing rule in transaction SO50 and set it to all recipients.
    If i send a mail from any external id to the id configured in SAP then it is coming in SAP Inbox (SOIN) but the exit class for processing the email is not getting triggered.
    I have made all the settings for SMTP.
    Kindly guide me with the steps needed to be followed for triggering the Exit Class.

    Hi
    Check u have maintained ur outgoing mail server IP in SCOT transation.
    Check link step to configure PO mail.
    http://architectsap.com/blog/sap/sap-mm-purchasing-send-purchase-order-by-mail-to-vendor-in-sap/

Maybe you are looking for