Inbound idoc with error status 52 messege type hrmd_a07

i have an inbound idoc with status 52
error messege : Object 01 ,P ,00056786 does not exist: infotype 0302 cannot be created
Object 01 ,P ,00056786 does not exist: infotype 0006 cannot be created
i debugged but i haven't find out the reason
am updating 0000,0001,0002,0003,0006 infotypes

Hi rahul,
Need to check the address filed (0006) for BP mapped to postion (00056786)
Infotype 0302 (Additional Actions) :
Infotype 0302 is not maintained directly and is automatically updated by Infotype 0000 .
The additional actions Infotype (0302) is of time constraint 3 (gaps and overlaps).
Specifically in some cases if we want to have a non status-changing Action on the same day where already a personnel action is existing at that time we can activate the Infotype 302 by executing Report RPUEVSUP.
please check and let me know . I think it will be helpfull
Thanks and Regards,
Krishna

Similar Messages

Idocs with error status

Hi Everyone,
How to find all idocs with error status for a given date range?

Hi,
Please refer EDIDS for Status and EDIDC for control records.
Also refer the below wiki page for details.
http://wiki.scn.sap.com/wiki/display/ABAPConn/IDoc+Overview
Thanks,
Karthik

B1358 error while posting inbound idoc with a FM

Hi
We are trying to post and inbound IDOC with the help of an rfc and eventually creating an invoice from a bdc wrapped in the RFC
The idocs are successfully pushed to R/3 while they are not getting posted and the error code in we02 is as follows
No status record was passed to ALE by the application
Message no. B1358
Diagnosis
The application failed to return a status record to the ALE layer after the IDoc was processed.
This is due to an error in the application function module which processed the inbound IDoc.
Procedure
If you wrote the application function module yourself, you need to change the program.
If the function module in question is a standard application function module, you should consult SAP.
Note: we are using a custom function module
regards
krishna

Hi Krishna,
I assume that your function module processing the IDOC does not follow the ALE/IDOC processing rules.
Please check out the programming guidelines in the SAP Online Help under:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/78/21758051ce11d189570000e829fbbd/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/78/21758051ce11d189570000e829fbbd/frameset.htm</a>
Important are the parameters and tables that need to be returned, containing the correct IDOC processing status. Please take the IDOC processing quite serious in regards to complete Logical Unit of Works.
Best regards,
SIlvia

Status 56 - IDOC with errors added

Hi everyone,
 I was configuring File to IDOC Scenario, in the receiving R/3 system, i am getting error as Status 56 - IDOC with errors added "EDI: Partner Profile not available".
 but i had already created Partner profile in WE20.
Regards,
Varun Reddy.K

Hi Varun,
 The below link will help u in solving u r problem
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
Just try follow the steps followed in above mentioned link
And also check u r RFC connection in TC "SM59".
Reward with ponits if helpful
Regards
Sai Ganesh

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

IDocs with incorrect status

Hi !
When i tried to upload data from R3 to BW based on generic DataSource
( function module ) , in the monitor i get the following error :
Status code : 56. Description: "Idoc with error added" .
How can i get more details about the error? How To correct the Error ?
Thanks
Moshe

Hi,
it's IDoc with errors added
check if you have any errors in other stauses
and display 56 (double click) in WE02
you should see some more descriptions .
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4344391&messageID=3662902
Foe more information, please check this links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
rEGARDS

Creating Idocs With 64 Status.

Hai Friends,
My requirement is like this...
Scenario:- my client says...They Get some idocs from a external system and then a program runs in the background to read these idocs and post Inbound delivery and IR documents.
And Now As These IDOCs are not coming ...We have to read this data from a excel sheet and Create exactly the same type of IDOCs so that They can RUN the same Program to post Documents.....
Now my doubt is ...How do i create IDOCs with status 64 and that too in the same same..as here there wont be any target system..
Please help me with ur solution....How should i Approach...I know how to fetch data from excel and all..I need Help specially in
Creating IDOCs with 64 status and what should be in the Control Records..
Waiting for your insight.
Thanks,
Jeevan...

Hi,
You can use below FM for your requirement.
CALL FUNCTION 'IDOC_INBOUND_SINGLE'
 EXPORTING
 pi_idoc_control_rec_40 = w_control_rec
 IMPORTING
 pe_idoc_number = g_idoc_number
 TABLES
 pt_idoc_data_records_40 = i_idoc_recposting
 EXCEPTIONS
 idoc_not_saved = 1
 OTHERS = 2.
IF sy-subrc = 0.
Idoc created if sy-subrc = 0
Endif.
The Control records should be like this ( You need to check the partner profile)
w_control_rec-mandt = sy-mandt.
w_control_rec-docrel = <sap_release>
w_control_rec-direct = '2'.
w_control_rec-idoctyp = < Idoc type >.
w_control_rec-mestyp = < message type>.
w_control_rec-sndpor = <sender port>
w_control_rec-sndprt = < Sender partner type>
w_control_rec-sndprn = < sender partner>.
w_control_rec-rcvpor = < recv port>
w_control_rec-rcvprt = < recv partnertype >
w_control_rec-rcvprn = < recv partner>
Let us know if it helps you. Thanks.
Edited by: Atul Mohanty on Jun 23, 2011 10:59 PM

Post system refresh, "Request IDoc : IDoc with errors added"

Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AM

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

There are IDocs with incorrect status.How to rectify it?

Hi All,
I was trying to do full load for 0vendor_attr.
The error message is getting displayed as mentioned below:
" Error when updating Idocs in Source System*
Diagnosis
Errors have been reported in Source System during IDoc update:
Incomplete control parameter for commmunication wi
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
*How you remove the errors depends on the error message you receive." *
Please revert.

The Error messages in detail:
Incomplete control parameter for commmunication with the BW system
                                                                                Diagnosis
                                                                                The control parameters for communication with the BW server are not
     complete. A BW PlugIn upgrade could be the cause of the problem.
                                                                                System response
                                                                                Procedure
                                                                                Depending on the Release of the BW server, proceed as follows:
     BW Server Release 1.2B: Source system: Update InfoSource metadata
     BW Server Release >= 2.0A: Source system: Activate
Please revert at the earliest what needs to be done int his case.

Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**

Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

Error in Receiver - IDoc with errors added

Hi All,
I am getting error in 56 - IDoc with errors added in receiver System.
I am new in Idoc - please tell me How to resolve this issue..
Thanks in advance..

Hi all thanks for reply .
All are the help full answer ,
I use T-code WE19 and change partner profile and execute now it is fine.
But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

Work item with error status

Hi,
I need your help in order to know what shall I do when a work item finishes with error status.
Thanks in advance,
Andrea

look at business workflow -> development -> administration -> workflow runtime .
here you have several possibilities
SWPR to restart after error
SWI2_DIAG for diagnostics
SWI2_FREQ to see the details
SWWERRE_DEBUG to debug

Some times Child Job with error status

Hi,
We are running some standard report periodically, this report is generationg some child jobs.
Problems is that these child jobs, somtimes are failed with error status.
This is happening very few times,may be 2 or thrice a month.
There's no explanation on this.
I am running with 4.6c version and my Basis is 620.
Can you please add some valuable suggestion for this.
Thanks,
Anmol.

What is your question? How to stop the spawned job or how to stop the errors? What program? What is the error or the condition that triggers the error? You have to give more information and be clear about the desired result...

ApplicationDidReceiveMemoryWarning and exit with "error status 101"

My application crashed with memory error. It doesn't show any memory leak, but handles a large database and it looks like, its cache causes this problem.
I fixed it by closing database and reopen it inside "applicationDidReceiveMemoryWarning".
It works great on the first call to applicationDidReceiveMemoryWarning (actually significantly dropping the memory usage). But the function is never called again, and my application eventually crashes after a few minutes of heavy usage with "error status 101" .
My understanding is that "error status 101" happens when app doesn't release memory properly on didReceiveMemoryWarning, but in my case, it just crashes without giving me a chance to clean up.
Any idea on what's going on here?

Yes, actually, the other answer you got was wrong.
Just throw an error inside the script, probably (given what you want to do) at the end. For example:
osascript -e 'error "This is a test." number 9000'
on the command line will give (on the command line) something like:
6:22: execution error: This is a test (-128)
If you read the man page for osascript, you will see that by default script errors are written to stderr; if you have your shell script watch stderr between the start of the script and the end of it, you'll catch the result message.
A few things to keep in mind:
--> AppleScript can catch its own errors using a "try" block, similar to in other languages. The basic syntax is:
try
(* Do some stuff here *)
on error msg number num
(* Process the error here *)
end try
--> If you throw an error yourself, try to use an error number which is "safe". Most of the negative numbers are already in use as standard signals. For example, -128 is "User canceled", while -43 is "file not found" (which pops up if you cast a string to an alias and the string does not describe a path to a valid item in the filesystem -- that's actually a very simple way to test for file existence). If you use numbers starting with 9000, which seems to be the consensus starting point, then you have the additional advantage of being able to figure out where things went wrong.

IDOC - process code with error "Application Object Type not planned'

Hi all,
I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
Why is this so?
Please advice...
Thanks and regards...
William Wilstroth

HI all,
I had solved this problem. I should have gone to we57 to tie the function module.
thanks.
William Wilstroth

Inbound idoc with error status 52 messege type hrmd_a07

Similar Messages

Maybe you are looking for