Inbound interface found more than once for outbound interface

Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alex

Hi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan.

Similar Messages

Inbound interface was found more than once

Hi All,
Currently I'm working on a scenario wherein an invoice file is generated and created on FTP server, PI system picks up invoice (xml file) and sends to customer via EDI 810. The scenario failed in sxmb_moni and below is the error message.
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when determining the inbound interface: Inbound interface was found more than once (for same sender and receiver) for outbound interface urn:xyz:sap:components. 810_Outbound_Async_MI Inbound interface was found more than once (for same sender and receiver) for outbound interface
Can anyone help me out and provide some valuable suggestions.
Regards
Faisal

Hi Abdul,
Try to run the scenario in the ID.
There is one test tool to in directory for this, login to ID --> go to Tools --> Test configuration.
This will show you the error in the exact step.
-Supriya.

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

[svn] 3739: Fixing recent change to prelink to not run more than once for compc.

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Why do i have to pay more than once for my purchased album in itunes, when i download them again?

why do i have to pay more than once for my purchased album in itunes, when i download them again?

Probably because you purchased them again, instead of following the proper method for redownloading apps.
Downloading past purchases from the App Store ... - Support - Apple

Why the "Basic" crawled properties appear more than once for each property name?

When i map a managed property and want to select for example "Basic:9" - i see 2 lines of "Basic:9".
why is that so? are there more than one "Basic:9" property?
keren tsur

Hi keren,
The properties have different types, Basic:9 which has mapped to Path is Text type, the other one is Yes/No type. You could refer to:
http://technet.microsoft.com/en-in/library/hh134087(v=office.14).aspx
If you would like to know about Crawled property data types, please refer to:
http://blogs.technet.com/b/speschka/archive/2010/08/21/finding-which-crawled-property-data-types-match-a-managed-property-data-type-in-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

How do I get my new Apple ID associated with an older MacBookPro so that I don't get charged more than once for a purchased app when I download it to the older computer recently upgraded to Snow Leopard?

I recently upgraded my 2 year old MacBookPro to Snow Leopard so I could download Face Time and Final Cut ProX to it.
I've already purchased the apps and installed on my iMAC and Macbook Air.
After downloading Face Time I received the following mail;
"Your Apple ID, *************, was just used to purchase FaceTime from the App Store on a computer or device that had not previously been associated with that Apple ID.
If you made this purchase, you can disregard this email. This email was sent as a safeguard designed to protect you against unauthorised purchases.
If you did not make this purchase, we recommend that you go to iforgot.apple.com to change your password, then see Apple ID: Tips for protecting the security of your account for further assistance.
Regards,
Apple"
I don't want to be charged twice for these apps, especially Final Cut ProX, so how can I get the MacBookPro associated with the Apple ID I'm using now?
Cheers

This is probably a new precaution that Apple has taken to alert folks that something has occurred with their account that has not occurred before*, namely a Mac has downloaded something from their account that has not done so before. And as the notice says, if it was you doing so, then you may safely ignore the notice. Also, do not be alarmed, Apple refers to all downloads as purchases, even when they are free.
But if you are truly concerned about the notice then you can authorize the Mac with your iTunes account, which should be the same as your MAS account. Open iTunes on the older Mac and sign into your account. Then in the Store menu choose Authorize This Computer. Now this Mac is definitely associated with your account and can now play media that you purchase from the iTunes Store as well.
*My banks do the same thing when I pop up making a purchase with my bank cards somewhere in the world I have never made a purchase before. They call me and email me and want to know if it is indeed me using the card.

Importing Business Package more than once for different systems

Hi,
We have a demo portal (EP6 SP12) connecting to various SAP systems. We want to use the same Business Package for two different systems. Is there any way to import a Business Package a second time with a different system alias, without overwriting the first import, so we can point it to a different system?
Many thanks,
Jane

Prakash - I had thought of this, but I would then have to recreate the pages, worksets and roles manually. Also some BPs contain hundreds of iviews so it would be very time consuming to manually edit the system alias on each one.
Karsten - At the moment, we're interested in the ESS and MSS Business Packages but I would also like to know generally, since I'm sure in the future this will apply to other BPs for us.
Many thanks,
Jane

How to count more than once for different message

I have multiple messages into one column and I need to separate them and count them under each message. The error message start after colon (:)
ID ERROR MESSAGE
123456 Field on does not match: Note Amount, ID=584000.00, IP=579900.00: Note Date, ID=2005-06-1 IP=2005-03-30: Investor Org ID, ID=1000150, ID=1008246
so i need to show output like below
Note amount: 1
Investor Org ID :1
Not Date:1
Thanks

with t as (
           select 'Field on does not match: Note Amount, ID=584000.00, IP=579900.00: Note Date, ID=2005-06-1 IP=2005-03-30: Investor Org ID, ID=1000150, ID=1008246' msg
             from dual
select ltrim(regexp_substr(msg,':[^,]+',1,column_value),': ') || ': ' || count(*) msg
from t,
        table(
              cast(
                   multiset(
                            select level
                              from dual
                              connect by level <= length(msg) - length(replace(msg,':'))
                   as sys.OdciNumberList
group by ltrim(regexp_substr(msg,':[^,]+',1,column_value),': ')
MSG
Note Date: 1
Investor Org ID: 1
Note Amount: 1
SQL> SY.

Why would you need to "zero out" more than once?

Sorry if this is a dumb question, but I have always wondered why a hard drive would need to be written over more than once for better security?
If it is writing ALL zeros what is there left to find? I just don't get it.
Thanks,
Curious Tom

Hello! A random write could leave a few bits that might be salvadged while the "zero all data" maps out bad blocks and writes all zeros. Once should be enough. Tom

Can you create a form in which its never possible for the same person te sign the form more than once.

Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
All the very best,
Martin Angell

I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs.

Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs. What is going on and what can I do to fix this?

Unfortunately no, It says "Adobe not responding" as well when I try to open a pdf. It has done this a few times where I had to uninstall and reinstall. Also, Illustrator tells me to uninstall/reinstall as well.

Statechart module: Using a master statechart to launch a slave statechart more than once without getting Error 1100 at Obtain Queue (No object of that name was found)

Hello,
I am trying to create a project using the statechart module, and one of the techniques I am trying to use is a "master-slave" statechart structure, illustrated by the code I have attached to this post (you probably need the statechart module installed to look at my example code). The problem I have recently discovered is that the slave statecharts cannot be launched more than once without raising an Error 1100 at Obtain Queue. I have gathered from a few other posts that the cause of this error is the fact that the First Call primitive is used by the Statechart module to initialize the statechart when it is first run. This works fine for the first launch of the slave statechart, but the second launch and subsequent launches of the statechart fail on Error 1100, since the First Call primitive won't let the statechart initialize (the First Call primitive tells the statechart it has already been initialized (this isn't the first call), and the External Trigger function then tries to send an external trigger to a queue that doesn't exist).
What I can't gather from those posts is the correction I need to make to get this design to work. I tried to send the slave statecharts a boolean flag for the "Init?" terminal, to force a reinitializing of the slave statechart. I couldn't get that to work. I tried to not load the slave sub VI as a slave sub VI, and launch it using some VI Server code, so that maybe the slave sub VI would be loaded and unloaded, therefore causing the statechart to properly initialize, but I couldn't get that to work either. What correction should I make? How do I get this to work?
I really want to use this design pattern, first of all since I wrote a lot of code already with this structure, and second of all, it makes a lot of sense to me. How do I make it work? If someone could post a version of my code that functions the same, but without the error, I would appreciate that. If you don't have time for that, but would be able to outline the steps I need to take to get it to work, that would be helpful, as well.
Thanks to anyone for any assistance they can provide. If you need any other information, please let me know.
Attachments:
Statechart Sample.zip ‏431 KB

Thanks, Deborah. I tried this approach out, and it turns out you can't just wire a TRUE to the "Init?" terminal. You have to wire a TRUE for the first run of the slave statechart, and then it has to become a FALSE. If you wire a TRUE, it will constantly try to reset the statechart, which doesn't work.
The master statechart has to keep track of whether it has called the slave statechart, and communicate that to the slave statechart. On the very first call of the slave statechart, the "First Call?" function inside of the "Run Statechart" function will give a TRUE, which initializes the statechart properly, and then gives a FALSE from that point after. After that, the "First Call?" function doesn't work anymore (it will always return FALSE), and an initial TRUE, with subsequent FALSE values, has to be provided manually.
I attached a version that does this, which appears to work. Let me know if it doesn't work for someone, or if you have a better idea to implement the correction.
Thanks to everyone for the replies!
Attachments:
Master-Slave Statechart Sample.zip ‏439 KB

Service interface with more than one operation

Hi all,
is it possible to have a service interface with more than one operation?
I have found this blog:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID0209118050DB10459657028039341762End?blog=/pub/wlg/15123
But this sentence:
ABAP proxy (inbound/ outbound) cannot be developed out of a Service Interface having Operations with different type of messages included. If an ABAP proxy is to be developed then all the messages included should be of one type i.e. either the included messages should be Message Type, External Message, IDOC or RFC Message. This behavior can be observed when a Service Interface is created and then subjected for a check
regards

Hi,
now the interface is running but I get another error in .NET.
"The header 'Diagnostic' from the namespace 'http://sap.com/xi/XI/Message/30' was not understood by the recipient of this message, causing the message to not be processed. This error typically indicates that the sender of this message has enabled a communication protocol that the receiver cannot process. Please ensure that the configuration of the client's binding is consistent with the service's binding. "
Any ideas?
regards

How to use same page fragment more than once in a page,

Hi Gurus,
How to use same page fragment more than once in a page. I have a complex page fragment which has lots of Bindings (Binding Property set with backingBean variables).
I want to use the same page fragment multiple times on the same page with different tabs.
I want different ApplicationModule Instance for the page fragment in different tabs.
So I have created a Bounded Taskflow with pagefragments which has this complex pagefragment.
I've dragged the taskflow to page and created regions.
I'm able to execute the page successfully when I have only one region but fails if I have region more than once in the page.
Can anyone help me how to resolve this issue.
Web User Interface Developer's Guide for Oracle Application Development Framework: section 19-2 states we can have same pagefragment more than once in a page.
Thanks,
Satya

java.lang.IllegalStateException: Duplicate component id: 'pt1:r1:0:t2:si5', first used in tag: 'com.sun.faces.taglib.jsf_core.SelectItemsTag'
+id: j_id_id1
type: javax.faces.component.UIViewRoot@1d23189
+id: d1
   type: RichDocument[UIXFacesBeanImpl, id=d1]
    +id: j_id_id5
     type: HtmlScript[UIXFacesBeanImpl, id=j_id_id5]
      +id: j_id0
       type: javax.faces.component.html.HtmlOutputText@bc252
    +id: m1
     type: RichMessages[UINodeFacesBean, id=m1]
    +id: f1
     type: RichForm[UIXFacesBeanImpl, id=f1]
      +id: pt1
       type: RichPageTemplate[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@2a0cc, id=pt1]
        +id: ps1
         type: RichPanelSplitter[UIXFacesBeanImpl, id=ps1]
          +id: pt3
     at javax.faces.webapp.UIComponentClassicTagBase.doStartTag(UIComponentClassicTagBase.java:1199)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag265(__projectrevenuern_jsff.java:12356)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag264(__projectrevenuern_jsff.java:12317)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag263(__projectrevenuern_jsff.java:12262)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag262(__projectrevenuern_jsff.java:12200)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag261(__projectrevenuern_jsff.java:12147)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag260(__projectrevenuern_jsff.java:12099)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag259(__projectrevenuern_jsff.java:12047)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag258(__projectrevenuern_jsff.java:11992)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag257(__projectrevenuern_jsff.java:11948)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag255(__projectrevenuern_jsff.java:11860)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag254(__projectrevenuern_jsff.java:11808)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag9(__projectrevenuern_jsff.java:510)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag8(__projectrevenuern_jsff.java:461)
     at jsp_servlet.__projectrevenuern_jsff._jspx___tag1(__projectrevenuern_jsff.java:149)
     at jsp_servlet.__projectrevenuern_jsff._jspService(__projectrevenuern_jsff.java:67)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
     at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:429)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
     at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
     at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:443)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
     at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:492)
     at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag50(__projectrevenuepg_jspx.java:2392)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag49(__projectrevenuepg_jspx.java:2353)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag46(__projectrevenuepg_jspx.java:2209)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag45(__projectrevenuepg_jspx.java:2162)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag9(__projectrevenuepg_jspx.java:526)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag8(__projectrevenuepg_jspx.java:475)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag7(__projectrevenuepg_jspx.java:424)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag6(__projectrevenuepg_jspx.java:373)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag2(__projectrevenuepg_jspx.java:202)
     at jsp_servlet.__projectrevenuepg_jspx._jspx___tag1(__projectrevenuepg_jspx.java:144)
     at jsp_servlet.__projectrevenuepg_jspx._jspService(__projectrevenuepg_jspx.java:71)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:499)
     at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:248)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
     at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
     at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:473)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:141)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:710)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:205)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = CAMIND1 TXID = CONTEXTID = TIMESTAMP = 1262712477691
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<JMXWatchNotificationListener><handleNotification> failure creating incident from WLDF notification
oracle.dfw.incident.IncidentCreationException: DFW-40116: failure creating incident
Cause: DFW-40112: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:708)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createIncident(DiagnosticsDataExtractorImpl.java:246)
     at oracle.dfw.spi.weblogic.JMXWatchNotificationListener.handleNotification(JMXWatchNotificationListener.java:195)
     at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor$ListenerWrapper.handleNotification(DefaultMBeanServerInterceptor.java:1732)
     at javax.management.NotificationBroadcasterSupport.handleNotification(NotificationBroadcasterSupport.java:257)
     at javax.management.NotificationBroadcasterSupport$SendNotifJob.run(NotificationBroadcasterSupport.java:322)
     at javax.management.NotificationBroadcasterSupport$1.execute(NotificationBroadcasterSupport.java:307)
     at javax.management.NotificationBroadcasterSupport.sendNotification(NotificationBroadcasterSupport.java:229)
     at weblogic.management.jmx.modelmbean.WLSModelMBean.sendNotification(WLSModelMBean.java:824)
     at weblogic.diagnostics.watch.JMXNotificationProducer.postJMXNotification(JMXNotificationProducer.java:79)
     at weblogic.diagnostics.watch.JMXNotificationProducer.sendNotification(JMXNotificationProducer.java:104)
     at com.bea.diagnostics.notifications.JMXNotificationService.send(JMXNotificationService.java:122)
     at weblogic.diagnostics.watch.JMXNotificationListener.processWatchNotification(JMXNotificationListener.java:103)
     at weblogic.diagnostics.watch.Watch.performNotifications(Watch.java:621)
     at weblogic.diagnostics.watch.Watch.evaluateLogRuleWatch(Watch.java:546)
     at weblogic.diagnostics.watch.WatchManager.evaluateLogEventRulesAsync(WatchManager.java:765)
     at weblogic.diagnostics.watch.WatchManager.run(WatchManager.java:525)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.dfw.common.DiagnosticsException: DFW-40112: failed to execute the adrci commands "create home base=C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr product_type=ofm product_id=defaultdomain instance_id=defaultserver
set base C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr
set homepath diag\ofm\defaultdomain\defaultserver
create incident problem_key="BEA-101020 [HTTP]" error_facility="BEA" error_number=101020 error_message="null" create_time="2010-01-05 12:27:58.155 -05:00" ecid="0000INzXpbB7u1MLqMS4yY1BGrHn00000K"
Cause: There was an error executing adrci commands; the following errors have been found "DIA-48415: Syntax error found in string [create home base=C:\\Documents and Settings\\tammineedis\\Application] at column [69]
DIA-48447: The input path [C:\\Documents and Settings\\tammineedis\\Application Data\\JDeveloper\\system11.1.1.2.36.55.36\\DefaultDomain\\servers\\DefaultServer\\adr] does not contain any ADR homes
DIA-48447: The input path [diag\ofm\defaultdomain\defaultserver] does not contain any ADR homes
DIA-48494: ADR home is not set, the corresponding operation cannot be done
Action: Ensure that command line tool "adrci" can be executed from the command line.
     at oracle.dfw.impl.incident.ADRHelper.invoke(ADRHelper.java:1052)
     at oracle.dfw.impl.incident.ADRHelper.createIncident(ADRHelper.java:786)
     at oracle.dfw.impl.incident.DiagnosticsDataExtractorImpl.createADRIncident(DiagnosticsDataExtractorImpl.java:688)
     ... 19 moreI get the above Error.
I have checked the bindings and it has 2 instances of the taskflow.
I have changed the backingbean scope to backingBean

Inbound interface found more than once for outbound interface

Similar Messages

Maybe you are looking for