Inbound queues in R/3

We have a ERP 3004 system
The messges have come in from XI and are sitting in the inbound queues and not going forward
can you please help me how to start the messages going through
Thanks
Nikhil

Ok now its fine
I just worked it out
It wasavery small reason I think no one Activated the queues

Similar Messages

  • Outbound queue won't fetch data to inbound queue after DS enhancement

    I enhanced the 2LIS_02_ITM extractor with a field from EKKN table, in CMOD filled this field. Transported all this to TEST and then to PROD systems. In DEV system everything is OK, but in TEST and PROD system my outbound delta queues are filling and not fetching the data to the inbound queues!!! When i launch the job in LBWE, it cancels itself. And when i see short dumps, it says something about modified structure. Any idea how can i fetch the data from one queue to another?

    Hi,
    First you have to make sure that there are no enrteis in LBWQ,delta queue and det up table before you do the transports.
    So anyway the process has to be repeated again.
    So once the transports are done then you will have to do the whole set up again.
    Do the follwing after transports.
    1)Delete the set up tables
    2)Do init w/o data transfer from the infopackage.
    3)Fill the set up tables( You can schedule a job in the background to fill the whole 7000000 records at the same time)
    4) Full repair loads to BW( Either you can do it in parts...like scheduling different loads at the same time through different infopackages for different selections OR one infopackage for the whole data).
    The better is to do in parts as in case of whole data load fails then you will lose the whole data and you will have to repeat the process again.
    You can schedule the set up table fill job as well as full repair infopackage schedule at the same time for different selections.
    Suppose if set up table is filled with selection A and once job finished then schedule the infopackage with selection A meanwhile you can fill the set up table with selection B and so no.
    This way you can make sure the jobs are not failing because of huge amount of data load at the same time the time taken to complete the process is less.
    As such there is no limitation on amount of data..its the duration of process which is limitation...for very long running process chances are that you run out of background process or you miss some IDOC's.
    Thanks
    Ajeet
    Edited by: Ajeet Singh on Nov 18, 2008 9:26 PM

  • Screen output without connection to user, Message struck at inbound queue

    Chaps,
    I executed inbound proxy form PI 7.0, the message was struck in the inbound queue of ECC 6.0,
    with status text "Screen output without connection to user" then when I apply execute LUW then it is converted to
    "ThiSend:bad tm type /connection closed (no data)".
    when i test the same message from 'SPROXY' t.code, inbound proxy class was working fine.
    I came to know that when we call an ABAP program in side a proxy then it will throw same error what I got by checking the below url
    Message struck at inbound que in server proxy
    But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
    Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
    because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
    In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
    am I missing any basic things? please guide.

    But in my proxy. I am just putting the data into z table and on some condition I am calling some other BAPI call.
    Here my doubt is calling the SUBMIT for other ABAP program is same as calling the BAPI call?
    I too believe ..
    because in the above thread clearly saying that don't use the other ABAP program in proxies. is the same case for calling the BAPI call into the proxy?
    It is saying not suggestable...!!!! BAPI calls work perfectly !1
    In proxy, the logic is I am just simply reading the data from IS(integration server, PI7.0 SP 18) to ECC 6.0(SP14) if the row is not there the data is reading into table. If row is already there then it is stuck up in SMQ2 (inbound queue) of the ECC
    am I missing any basic things? please guide.
    Seems so,
    Lets try below things..
    1. Plz check the user is having auth to run the executable program in ECC.
    2. It seems that you are not using the proxy structures in a correct way..and check the calling program also..!!
    Edited by: Santosh Rawat on Jul 30, 2009 1:12 PM

  • BADI For Inbound Queue in CRM

    Hi All,
    I am replicating Product Listings (VB02 in ECC)  data from ECC to CRM.
    Now I need to Update a Z table in CRM System with the data coming from ECC when the Inbound Queue in CRM System is processed via SMQ2.
    Can Anybody please tell me what BADI will be useful
    I found one CRM_DATAEXCHG_BADI but not sure how it goes.
    I also tried in Debuging the inbound Queue. It will take Long time to find out BTE or BADI in this way.
    So please help me with the BADI or BTE Name.
    Thanks
    Venkat

    Hi Gautham,
    No good, It did not help me Gautham.
    Can you please suggest me some other way of dong it.
    I have 2 badis to use one is address_update and the other is addres_check.
    I implemented address_check which had a address structure as a changing parameter and I update it there, it works absolutely fine.
    But my requirement is to update the structure based on the condition of BUT000. That is the BUT000-type, which means I need to update the structure only for person and not for organization and group.
    so in the badi address_check i need the BUT000 details, which I am not able to trace even from the local memory as I am getting the error saying "Memory is not yet instantiated"
    and If i use the other badi address_update.
    I have the problem the other way round here. I have all the BUT000 details here I can put the condition to update only for person, but I am not able to update the address structure.
    Please help me. This is required very urgent.
    Maximum points will be rewarded.
    Thanks in advance.
    Arul.

  • Inbound queue Erros

    Hi guys,
    The inbound queues in the CRM are struck with the error showing
    "Logical System is not defined in table SMOF_ERPSH"
    when i checked the table SMOF_ERPSH in the the CRM there is an entry for the R/3 system and the CRM system
    So I was not sure what the error is pointing to
    RGDS

    Hi Rajeet
    The inbound queue has status 'SYSFAIL', and the system issues an error message stating that the logical system is not defined in table SMOF_ERPSH: There is no OLTP site for the logical system the data came from. Solution: Check your system settings: Is the transfer of data from this system to the CRM System supported? If yes: use the Administration Console (Transaction SMOEAC) to create a site for this R/3 System. Also check whether BDoc types must be subscribed on this site. In this context, refer to the Adapter Framework documentation and to the documentation on the administrations console.
    Vaibhav

  • Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

    Hi,
    I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
    Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
    Thanks.
    Regards
    Mansi

    Hi Mansi,
    Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to  alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
    Regards,
    R.Brahmankar

  • Mail to RFC -- Data Structed in Inbound Queue  -- Help needed !

    Hi Friends ,
                           I am doing Mail to RFC Asyn Scenario . Mail mails are come into the mail box . XI is trying to read the mail and send to R3.
                            It was working fine suddenly , Many mails read succesfully and data send to RFC , But it is structed in   ( SMQ2 ) inbound Queue ( <b>Message Scheduled on Outbound side</b> )
                  For long time it is showing like this . No data is accepted  by RFC. I have checked the Adpater confi for rfc it is fine .  I have given Max connection as 50 also .
              Please help me to solve this issue !
    Regards.,
    V.Rangarajan

    Hi,
    Have the Queues being registered in the R/3..?
    If not....
    1.Go to SXMB_ADM(R/3)
    2. Go to Manage Queues and then
    3. Register All Queues.
    <a href="/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically Failed Messages</a>
    Regards
    San
    <a href="Remember to set the thread to solved when you have received a solution to set the thread to solved when you have received a solution</a>
    Where There is a <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/weblogs?blog=/weblogs/topic/16">blog</a> there is a Way.

  • File to ABAP Proxy (problem with inbound queues in R3)

    Hi,
    In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
    But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
    Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?

    Hi,
    Please check the program code for Server ABAP proxy.
    This will show you the trigerring of Proxy on inbound side.
    ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
    For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
    Thanks
    swarup

  • Messages stuck in SMQ2 Inbound Queue.

    Scenario: File->XI->Proxy
    When I put 50 files at the same time in a directory, channel is configured Exactly Once in Order and we have created queue with the name GATQUEUE. The messages are picked up from directory and sent one by one to BPM process. 31 messages out of 50 poccesed succesfully but 19 of them get stuck in the queue always. Though GATQUEUE is released lately but they are stuck in 'XBQO$PE_WS90000013' queue. This is seen in SMQ2 Inbound Queue.
    Could you please tell me how to release this message which are already stuck and what bit of configuration required so that it works for 1000s of files/messages at a time?
    Thanks
    K

    Hi Kiran,
    Just add the below parameter in XI tcode : SXMB_ADM
       Execure Integration Engine and Configuration.
      Click on Specific Configuration, go to change mode
       Click on New entries
      Category : MONITOR
      Parameter :QRFC_RESTART_ALLOWED
      Current Value : 1
      Save.
    Regards,
    Venu.

  • Messages still stuck in the Inbound queue SMQ2

    Hello XI Gurus,
    All my messages with "READY" status are still stuck in the inbound queue (smq2) for the last 2 hours...there was no SYSFAIL error messages or scheduled background running. I have to manually go in and executed each of those messages, instead of automatically process it. Could someone please tell me how to troubleshoot this?
    Thanks so much in advanced,
    Dng

    Implement SAP note 758677 for this. This exactly deals with your issue.
    This Basically speaks about scheduling 'RSQIWKEX' for inbound and 'RSQOWKEX' for outbound queues.
    Also, you need to set the parameter 'QRFC_Restart_ALLOWED' to '1' in the transaction 'SXMB_ADM' -> Integration engine. Its in the runtime dropdown menu.
    Note : without this parameter being set this will not work.
    Thanks,
    Karthik
    Edited by: Karthik Rangaraju on Oct 1, 2008 2:13 PM

  • Queue with error in Inbound Queue SMQ2 can not de deleted

    Hello,
    We did the replication of Materials and Services correctly.
    However, in the SMQ2 trx. (inbound Queue in SRM 5), we keep seeing the following queues:
    R3AD_ATTRIBUTE
    R3AD_CONDITIONS
    R3AD_LEDELIVERY
    R3AD_OBJCL
    These queue have status "SYSFAIL". We want to get rid of these queues but upon deleting them, they keep appearing again the folowing day!
    How do we have to proceed?
    Thanks for any reply.
    Aart

    Thanks Dean but it did not work.
    The queue´s keep coming back.
    The message of the SYSFAIL is now:
    SR053 - No mapping function module entered in SMOFSUBTAB
    Any clues?
    Thanks,
    Aart

  • Error in Inbound Queue (Tx. SMQ2) / Error "CMW_PIF_PROTOCOL"

    Hello everybody,
    I have got a queue which appears time by time. It is called "ISP_I_000000000000017" in my Inbound Queue.
    Below further information about that.
    Information from Tx. "SE16" about this Error.
    Client             010
    Site-Typ-ID          GWA_01
    ISP Queue-Typ        I
    Log. Queuename       CMW_PIF_PROTOCOL
    Queue-Name           ISP_I_000000000000017
    Destination          ISP_I_000000000000017
    Description        GWA_01/I/CMW_PIF_PROTOCOL
    Has anyone an idea what's behind this? What is the pif-Protocol? How can I avoid this error in the inbound queue.
    Every idea is appreciated.
    Thanks in advance.
    Kind regards Harry

    One option would be to raise an exception for such steps....in the Exception handler you can repeat the same step....in your case it will be the mapping (n:1) .....are you sure that the process failed in Transformation step and that the data was correct....i mean all the 5 IDOCs were sent as an input to the mapping?
    Can you ensure that during this time there was no connection issue between the BPM and the mapping runtime (IE)....may be you can check with your BASIS.
    Regards,
    Abhishek.

  • Messages in inbound queue in status-RUNNING and it is too slow

    Hi Experts,
    We have a issue there are tons of messages in inbound queue in status-RUNNING and it is too slow!, hence there are more messages getting in the queue every minute.
    This is Production enviorment.
    We have priority queues
    QIN is waiting status.
    De-register will not work due to loss of messages fear
    Please advice
    thanks and regards,
    krushi

    Hi,
    If the queues are hanging due to peak load at sometimes
    you can schedule following reports to restart them automatically
    (dont have to lock and unlock manually)
    RSQIWKEX - Inbound Queues
    RSQOWKEX- Outbound Queues
    Also you can save the first entry of the queue if its causing problems to process later- smq3
    thanks
    francis

  • Messages stuck in Inbound Queue with Ready Status

    Hi All,
    The messages in the Inbound queue are getting stuck in Ready status.
    I have to manually Unlock each queue to start the processing.
    After some time again all the message queue are back to the Ready State.
    Please help me on this issue.
    Regards
    Milan

    go to --> sxmb_adm
    Manage Queue
    Select all Queues, Activate Queues.
    & check your scenarios, now it will not stuck due to this error.

  • Inbound-Queue - Set Queue To Retry via Coding

    Hello Experts,
    I am just implementing a MEP-Scenario and facing a problem in timing.
    Because of Missing Data delivered via RFC from other system i need to set an inbound-queue (R3AD...) to waiting and retry.
    Is it possible to do this via coding?
    When I fire an error message (type EAX) the queue gets in status "SYSFAIL" - but in this case it will not automatically retry again.
    Any hints are appreciated.
    Thanks
    Mario

    Hi ,
    You can deregister the inbound queue R3AD* from SMQR tcode and the other way is You can write a program to start the inbound queue processing which has a status 'SYS-FAIL'.
    Thank you,
    Gangadhar.S

  • CREMDM splitted by PI, ADRMAS gets posted, CREMAS in inbound queue

    Hi all,
    I am on SAP MDM 7.1 SP03, SAP PI and SAP ECC6.
    I have gone thorugh all the threads and Guides related to MDM but couldn't find a valid solution for my problem described below. However, I did find some tricks and tweaking which I dont want to use as they are not recommended by SAP.
    We syndicated NEW Vendor records being created in MDM using CREMDM with standard Syndication Map. We have Vendors number generated in MDM and the number range being used exists in ECC and is marked as external. Moreover, the number range uses all of 10 digits, so there is no question of Conversion Routines with it. We deployed PI for splitting CREMDM to ADRMAS and CREMAS. We have serialized ADRMAS to go before CREMAS. We have assured that fields common between these two, have "no data" character i.e. "/" in CREMAS with correct data in ADRMAS. And ADDR_GROUP is mapped as "BP".
    Now the problem is, ADRMAS gets posted but CREMAS remains in the inbound queue. The queue running but still CREMAS remains there with CODE as "75". This results in non-creation od Vendor master record as CREMAS is not posted.
    Can anybody help with this. I really appreciate the support.

    Hi R,
    The ALE inbound function modules treat each IDoc segment as a current set of data. Missing fields (or fields that have no data) are interpreted as a value deletion. To keep the existing value for a single field, you have to add a no-data sign as field value for NAME_1. This no-data sign is a single slash (/).
    Please execute the inbound function module manually in WE19 to test this. If an exception is seen at NAME_1 ,pass a value or '/' and check for successful posting of Idoc.
    If this works, modify inputs to CREMAS accordingly.
    In addition a good SAP Note 1052964 - MDM: Distribution of Business Partners, Customers, Vendors for your reference.
    Regards,
    Vinay M.S

Maybe you are looking for