Incoming calls display email instead of name

Since the last OS upgrade, I start getting email address instaed of the name of the caller. Is this a bug?

Hey Imgeuk,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Do you have the country code listed in any of your contacts?  Also what version of BlackBerry 10 software are you currently using?  This can be found by going to settings>about.
I look forward to your reply.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click  Accept as Solution for posts that have solved your issue(s)!

Similar Messages

  • Full screen incoming caller display 2730 classic

    Is there a way of making the phone display the incoming caller display larger, when your driving and using Bluetooth its almost imposable to read the number or name of caller
    I know the font size can be changed for other applications but this one is a must as it could be quit dangerous to try and read who is calling when driving
    A full screen would be better

    Is there a basic nokia phone that just makes and receives calls, text, and with Bluetooth with extra large fonts so the phone can be read, mostly for incoming calls
    My 10 year old 6310i was good but the bluetooth let it down

  • Incoming calls do not show contact names

    We have a problem here and it is the only reason I had to go back to my 9900.
    All my over 3000 contact are put into my phone with the relevant country codes.  Now the names do not show up on incoming calls.  I have played around with Smart dialling settings nad tried other things and... 'no joy'.  The only thing that works is to remove the country codes to all local numbers.
    HELP!!!...so I can go back to the Q10!!

    I have this same problem and dialing *228 didn't not fix my phone either. 

  • About the incoming call display

    As I see the demonstrations of iPhone, when there are incoming calls, the caller's picture is just very small, at the top left corner, while the background is the wallpaper. But that isn't the case in my own iPhone, how can I make it like those demonstrations?

    This depends on how you added the contact photo to the contact.
    You can either add a photo to a contact via the iPhone or you can add a photo via a contact via the contact program you use that communicates with iTunes and syncs into phone. Most of the programs below support adding some sort of photo to a contact. Some may not.
    Outlook 2003 Service Pack 3
    Outlook 2007 Service Pack 1
    Mac Address Book
    Windows Address Book
    Windows Contacts
    Entourage
    Google and Yahoo Address Book

  • IMessage displays numbers instead of names for some contacts

    Hello All,
    I have googled this problem and searched these forums in attempt to fix this issue but to no avail just yet. To date I have tried:
    Switching off iMessage, performing a soft reboot, switching iMessage back on
    Same as above, but doing a hard reset instead
    Same as above with both of my iTunes email addresses (I had an old one I used before I upgraded to the iPhone 4)
    Adding +1 to my contact names
    Choose "add to existing contact" from iMessage and replacing the old number
    Turning off icloud, Removing all the contacts from my phone, and then turning iCloud back on
    Restoring system settings
    Nothing has worked and I get a mix of names or numbers in iMessage.
    It is severely annoying (1st world problems, right?) as I'm tour and communicate with many promoters via text (600 contacts and growing...).
    Does anyone have any other ideas?

    *on tour

  • Caller ID for incoming calls NOT displaying name from contacts (only displays phone #)

    Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact.  Since I don't have many phone #'s memorized, I have no clue that it is someone I know.  However, the contact name is displayed in my call log, just not on the initial incoming call display.  How do I get the caller ID to recognize and display the appropriate contact name with the phone #? Any help would be greatly appreciated!  (I have the 8520 blackberry)
    Thanks, Lauren 
    Solved!
    Go to Solution.

    Thanks so much!  The problem was the security settings.  I switched the content protection for "contacts included" to "no" and now my contact info shows up on the incoming call display!  Thanks again for your help!

  • Incomming call does not display number

    I have iPhone6 Plus.  All incoming calls display name only. how can get it to display number also

    It will only display the name if the information is entered into your contacts. That is how it works on the phone to display the name. If you want to see the number, you would have to go into your recent calls and tap on the blue . The highlighted number is the one they called from.

  • N82 caller display: displays number but not the na...

    Hi, I have a Nokia N82 running on the Fido network in Canada. I have the caller ID display and I'm supposed to have the name display combined with the number display. So when someone calls me, it should say the name AND the number. Here's the description:
    "It's a service that lets you see the incoming caller's phone number and NAME on your phone's display even if they're not in your address book. So you'll always know who's calling you."
    But what happens on my phone is that it only displays the number, not the name. Is there some special setting to enable that or my phone is just incompatible with the network? When the caller is in my contact, the name displays. It seems that the phone cannont display both at the same time or something like this...
    Please help. Thanks

    If it's a service your talking about then you need to get in contact with the company that runs that service.As i know full well that if a name is not in your phone book then only the number will show.
    Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
    If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

  • Way to disable vibrate for a specific contact's incoming calls only?

    My iPhone is not jailbroken, so I am unable to use iBlacklist to black or ignore incoming calls. So instead I've edited the contact in question to have a silent ringtone.
    However, in general I prefer to have both ring and vibration on for all incoming calls, since I'm often in loud areas where I can't hear the ringtone.
    But the reason that I want to block this particular contact is because it calls me at all sorts of weird hours, thus the vibration wakes me up. So not being able to disable vibration for this contact in addition to the ringtone is a problem for me.
    Is there any way that I can not only make the ringtone silent, but also disable vibration for this specific contact - and only this contact? Perhaps some app, or a setting that I'm unaware of?

    Check with your carrier. Many have the ability to block calls from certain numbers. Many do have a cost associated with them though.

  • Caller display partial failure again

    On 3 April 2014 I reported that my caller id had not been working since 24 March 2014 (last incoming number displayed on my phone).
    After checks I realised that caller display did work on an ordinary directly connected handset but not on my Siemens Gigaset S795 cordless/answerphone system.  I assumed it was faulty and bought a new base station which also failed to work.
    On 23 ‎April ‎2014 I reopened the fault .  As reported the system had worked perfectly for years before this.  *#234# confirms CLID is active. 
    The new unit still does not work even when connected directly to the master socket with baseplate removed (i.e. no other phones or broadband filters connected).
    However, the new phone works perfectly when connected to my next door neighbour's phone line.
    Incoming calls just display 'external' but otherwise I can make and receive calls normally.  My broadband is unaffected.
    I have to assume that something has changed in the quality or strength of the incoming caller display signal.
    Would you please look into this since when I checked the progress of the last reoprt earlier it was marked as sorted before I reactivated it  suggest any further steps I may take to resolve this matter.

    This is a customer help customer community forum and your posts do not go to BT. Can you delete the vol ref numbers for your security as this is a public forum
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

    My phone displays numbers instead of contact names for incoming calls and text - how do I fix?  It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list.  Can anyone help?  I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

    Alexandribill, I have been having the exact same issue.  I got a new phone and restored my contacts.  If the # doesn't have the area code first then the name isn't shown.  I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
    I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

  • Caller ID for incoming calls NOT displaying name from contacts (only displays phone # on BB Z10)

    on the Z10 Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact in the phone, even the call log it show the number and not the name.  How do I get the caller ID to recognize and display the appropriate contact name with the phone fro an incoming call? Any help would be greatly appreciated!  Thanks, Akhanbilal

    Thank you Arsen but, as with everyone else : (1) When you get an in-coming call, it has no call log on the phone app call log that allows you do a thing under the sun except to touch the number of the last call, and when you do, it CALLS THEM BACK. (2) On every other BlackBerry I have owned, about 10 to-date, I simply selected the last in-coming call and had a button at the bottom of the screen to allow me to ADD TO CONTACTS. (3) This does NOT exist on the Z10, and there certainly is no "Click on number, little slider pops on the right, select add to contact."  Instead it dials them.  Frustrating other uses have described Arsen. Further, while on the topic : (4) None of this has anything to do with 10-digit national dialing plan or anything else on swipe finger down from top in Phone App, Arsen. (5) When you swipe Phone App down, you see SETTINGS. Then, there are 13 items.  I have looked at all 13 items and see nothing as you describe to select, nor any instructions on what to set the SMART DIALING to when there are 3 area codes local for my city and country code shows +1. Further, while on topic here : (6) Visual Voice Mail has been turned-on and whatever visual voice mail is, never supported on any previous BlackBerry including my 9780 before this, I have it with T-Mobile and have it turned on on the BlackBerry Z10 and it too does not work.  On the positive side, I do have a work-around for BlackBerry Z10 to 2013 Toyota entune. (7) I first took a vm msg .wav file of just hello (blank will not send) and saved it on BlackBerry Z10.  The Toyota entune is LOOKING for a music and will LOCK-UP if none are found.  By giving it this, it worked on my 2013 Toyota entune for the 1st time ever.  Yeah !  It is a little frustrating every few minutes listening to myself say HELLO.  But, hey no one really notices it with all the other stuff going on NAVIGATION, radio, cell phone calls, and all the computerized alerts on 2013 Toyota even without entune. (8) What I did now was to go into Navigation and remove SYNC with MUSIC.  I accomplished that after pairing to Z10 to 2013 Toyota, by CANCELLING ALL CONNECTIONS leaving only the pairing itself.  Then, you must choose some connections in the pairing section of SET-UP within Navigation itself.  If you cannot even get to that point, try depressing on the Navigation Screen, INTERNET at which point it will allow you access to SET-UP when you see the message NO ENTUNE APP FOUND ON YOUR BlackBerry Z10.  Red-headed step-child is what we all are.  Have to help each other.  Arsen I appeciate you helping all of us.  Seems the list is about 20 who have voiced it here in this one thread.  We voice it for the 200 million BlackBerry users worldwide, all left out in the cold despite a pretty cool Z10 product. Far better than iPhone 5.  I chose phone and internet.  Internet comes back no BLACKBERRY Z10 TOYOTA ENTUNE APP.  But, at least now I don't have to hear the music HELLO and do not also have the BlackBerry Z10 LOCKED-UP with pop up message you have to say OK to 10 million times to clear and never can actually do a thing on the BlackBerry Z10 as  a result.  Cannot add an in-coming call to Contacts Z10. Cannot see name and number calling me, just the bloody number, no clue who is calling ridiculous. Cannot do diddle-e-squat on BlackBerry Z10 on Toyota entune.  No App.  Horrendous. TAGS : Z10 no caller-id name, Z10 no app Toyota 2013 entune, Z10 add call to Contacts

  • I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

    Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

  • Is possible to display Country Name in incoming calls?

    Is possible to display Country Name in incoming calls? If number is saved with country code. Attached is the sample as i mean.

    If you need one more column, then you need to expand the field catalog table and data table as you did for all other fields and you need to code the logic to calculate the subtotals and populate the new column, but if you want to have row, that will be easy. For more info you can [refer |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4063c42a-2549-2c10-fab6-a8c99d98b9b5?quicklink=index&overridelayout=true]this:

  • Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

    Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showing just numbers to the contact names. Same thing when looking at call history and voice mail- sometimes it shows numbers and then I'll go back and the contacts will be back. So frustrating!

    boomer1630 wrote:
    - i have a Samsung S3)
    -I have tried using *228 to update.
    You don't dial *228 to update the Preferred Roaming List on 4G phones; I"m surprised the call went through.  The PRL updates are handled by the SIM card. 
    Try this and see if it helps:  turn off the phone, remove the SIM card, and wait a few minutes.  Then re-insert the SIM card, turn the phone back on, and give the phone a few minutes to re-establish a network connection.

Maybe you are looking for