Incompatible image size avi2 write frame

Hello,
I am a beginner in LabView, and I am currently trying to use the Ximea CCD and reading the image and writing it into an AVI file. I make sure that the image is RGB U32 before it goes into AVI2 Write Frame, but it still gives me the error "incompatible image size." Everything up to the AVI2 Write Frame block seems to work fine. Any advice would be appreciated. Thank you in advance.

Without seeing the code, it is difficult to begin to suggest wher the trouble arises (personally, I think it is the fourth function from the left ...).
Before trying to save images, are you able to acquire them in MAX? If so, then MAX should be able to provide you with parameters that you might need for the various Image Processing VIs (such as the size/type of the Image buffer).
Bob Schor

Similar Messages

Incompatible image size error

Hi,
I had a program that was working, and then made a copy of it to make some changes. The main change was to be able to put a BCG correction on the subtracted image. Now for some strange reason I get an Incompatible image size error. Can anyone help - also, if you could give me a suggestion soon that would be helpful as I have a deadline coming soon.
I suspect that I'm missing something obvious, but can't work out what it is.
Thanks for your help
Sam Whitehead
Attachments:
error.jpg ‏23 KB

Hi casualfanta,
I understand that you are using I-16 type greyscale images, but your screen capture does not include the BCG part. I am assuming you are using the IMAQ ColorBCGLookup VI even though you don't need colour, because the input for the IMAQ BCGLookup (no colour) is of U8 type.
If you are already using IMAQ ColorBCGLookup, then try using the IMAQ Cast Image VI to force a U32 type input and hopefully that'll solve the issue. Let me know if that helps!
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Error message: incompatible image size when using IMAQ in image processing

I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

Hello,
Which particular VI is outputting this error? Did you try larger border sizes (5,7)? What is the exact error code and error string?
Regards,
Yusuf C.
Applications Engineering
National Instruments

"AVI2 Write Frame" not working on files with "µ" in path

This is a Bug report!
Please have a look at the attached VI. The AVI file is created but no data is written and the Write Frame function reports error "-1074395969".
If I change the path to something without "µ" it's working! Tested in the 2013 Version.
Attachments:
AVI2WriteFrameBug.vi ‏17 KB

Hi Madir123,
Can you downconvert it to 2012 version and post please ???
Thanks
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

Using IMAQReadFile with .jpg format of file is producing an "incompatible image size" error ?

The .jpg monochrome images are of slightly different sizes. Is there a way round this or should i use a different file format ?
Attachments:
Read_multiple_IMAQ_Image_and_other_data_from_file_and_loop_through.vi ‏88 KB

I trimmed down your code a bit, but I don't see any problems with using various sized images. I ran your code first with no changes except removing the text file IO and changing the paths and saw no problems. I am using LV 6.1 with Vision 6.1. Take a look at the code below and see if it works for you.
Regards,
Brent R.
Applications Engineer
National Instruments
Attachments:
fileread.zip ‏309 KB

Error-1074396074 IMAQ vision: Incompatible imag size

Hi everybody,
I need your help because I have a big problem and I don`t understand why...... But I hope it is easy to resolve.
I searched but found nothing.
I have this kind of error
But I don`t understand because I have two software, the first works very well, So I just copy this code to put in the second software, just to record one video.
Everything it`s the same but with the second there is this error message.
this software works very, whitout problem.
And this software, you cansee it is the same code, doesn`t work
I can`t understand why really..... I try to change the format of the imaq, or use IMAQ cast imag, but whitout results.....
If someone can help me
Thanks a lot in advance

Hi!
It is strange that if you used the same code, one time it works and another time it doesnt. To be able to see good if there is an error it would be great if you could submit your VI. But first try to take a look at this KB: http://digital.ni.com/public.nsf/allkb/4FAC615B62919BA5C1256ED00046997A
This explains the error and I hope you will understand which steps to take as there are also other links inside this KB for more information. So please verify the KB mentioned above and the settings you are doing in your code.
Please let me know how the progress is going.
Collin de Wit
National Instruments
Applications Engineering

Error message: incompatible image size when using IMAQ in image processing

I want to do low pass filter and convolution on an acquired image. When I connect the image to the VI, the message: incompatible image size appears. I have tried to set the border to 3 in IMAQ create, but it does not help. Anyone know how to solve this problem?

A couple things might be causing this problem-
1) The convolution matrix is bigger than 7x7, or
2) You have created an image, but there is not yet anything in the buffer
You can check number 2 by doing a winDraw window just before you do the convolution.

How to change the maximum frame rate of the camera by changing the image size?

I have two acA2040-180km cameras which are connected to 2 NI PCIe-1433 framegrabbers, I am monitoring my cameras by LabView, maximum allowable frame rate is about 187 for full resolution images, but I just need a small fraction of the images, I know if I make the images smaller, FPS will get higher, but it isn't possible by changing the image size in NI MAX, I've also tried to change the size by defining the region of interest in the grab setup.vi, but it would be after going to camera so it isn't the case as well, so I need a VI to go to the camera before starting to take photo and define the region of interest which is going to be captured, would you please help me to find it?
Please help me, this problem get me stuck!!!

Have you tried changing the image size using property nodes as Bruce suggested? Do remember with Basler cameras, reducing the width only will not affect the transfer speed but the reducing the height will. Have a look at the frame calculator to understand what you frame rates you can acheive with certain settings:
Basler Frame Rate Calculator
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Question about image size, canvas size and Picture frame

Hi,
This has always been a little confusing so let me describe what my question is:
Assume I have a created a new PSD that is 8 1/2 x 11.
The canvas size is the same 8 1/2 x 11.
I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border.
Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2. Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame
I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
Hope I made this somewhat clear.
Bob

1: Decrease the size as you describe.
2. Go to File>New or Ctrl N
3. Make the box 8.5x11. Make sure the other data conforms to your image.
4. Now,holding down Ctrl-Shift, Drag the image to the new box and release the mouse. Your image will be centered in the box.
Note: there may be a method to do this including any adjustment layers, but I usually only do this as a last step, flattening a copy of the working file.

IE incompatible ? Image size.

Hi,
I know very little about HTML, CSS and the like but as a photographer I upload gallery webs all the time for clients etc. I generate these in PS CS2 or iView MediaPro and then upload to my server (shared web hosting).
With a current project requiring a 'site' type environment I decided to try iWeb. Before visiting this site please note that due to image sizes with iWeb it's a bit on the heavy side and if you're using IE on a PC BEWARE of crashes! Safari may even crash as has done with me.
http://www.kura-images.com/camping
Remarks and problems :
1. As you can see my site does not resemble any iWeb template - using the 'modern' template I basically threw everything away and designed from scratch. It's a great WYSIWYG appli in that sense - no code - just drag and drop, resize, add some effects etc. I published regulary to a folder as a way of double checking but was impressed with the 100% WYSIWYG capability of iWeb
2. Image size is a MAJOR problem. My concerns are specifically with the gallery pages generated from the photo page temps. Thumbnails at 16ko is too big and the motor that generates the large image files uses a single parameter (800pixels largest dimension) that cannot be changed in any pref settings etc. It also uses a compression factor which is a tad too high. Using Image Ready or the PS gallery web function (driven by Image Ready) I can get as good visual quality for my web-optimised JPEGS for 65% of the file size.
Note : I tried this file swap as a test
I changed one image in the folder for the "activités" page (activities_008) - I made a smaller thumbnail in ImageReady and created a 600pixel version of the large file; I replaced the images in the folder with these and checked the site. The thumb appears no problem in a smaller size (btw 6ko vs 16ko - that's a big diff when you apply it to 250 images !). SlideshowJS however has instructions to open the image at main size as determined by the slideshow index file creation generated by iWeb. And that's written as 800pixels. So on opening the 600 pixel image I'd replaced, slideshowJS opened it to 800pixels (not pretty). The only way to rectify that was to go into the source code in the relevant 'activités' js file, find the codeline for the image 008 and change the values manually. And I'd have to do that with 250 line of code ! That rather defeats the prupose of having a nice easy application to produce your galleries.
3. Upload to my server via Transmit was trouble-free. No problems publishing to a non .mac server.
4. Problem with the page titles. The names you give to pages determines the URL. Any spaces means you get the %20 thing and if, like me, you're writing in French the accents mean that iWeb has to get around the problem in a different, and not very practical, way. iWeb creates a random character line as a name, and uses that as the URL for pages where accents appear in the title. When the assets and index page are published those long character names appear on the index file and folder.
I also think that may lead to compatability issues with certain servers.
5. But here's the BIG PROBLEM !
I had 4 people with PC's and IE (God bless 'em) check out the site. 2 reported repeated crashes of IE (unexpectedly quit exe. error). No problems with the homepage - just when clicking on some of the photo pages. What is really strange is that neither had problems when accessing the 'La Soirée' page, but both had problems with all the others. Apparently the crash came after IE tried to load the page, succeeded in loading a few thumbnails and then stopped and crashed 5-10secs later.
6. EVEN WORSE !
I have gone back to my site several times, emptying Safari cache each time, and have succeded in stalling definitively Safari's attempts to load certain pages. Just stops with partial page upload. I then have to quit Safari and re-open to be able to access any web page (even other sites). Sometimes it's OK, sometimes not.
This site goes officially live on wednesday morning but for now it's a no-goer. Just too erratic and not IE compatible.
PLEASE, any suggestions ?
Many thanks in advance
Peter
G5 2Ghz Mac OS X (10.4.5)

4. Problem with the page titles. The names you give
to pages determines the URL. Any spaces means you get
the %20 thing and if, like me, you're writing in
French the accents mean that iWeb has to get around
the problem in a different, and not very practical,
way. iWeb creates a random character line as a name,
and uses that as the URL for pages where accents
appear in the title. When the assets and index page
are published those long character names appear on
the index file and folder.
I also think that may lead to compatability issues
with certain servers.
Yes, it is best to avoid spaces and accents and special characters if you can. If you must have them in your navigation links, then don't use the iWeb nav bar. Instead give your pages very short simple names with the Inspector, uncheck the box for "include in nav bar," and just create ordinary hyperlinks for page navigation. I don't know if this will help with IE compatibility, but it can't hurt.

IMAQ AVI Read Frame vs. IMAQ AVI2 Read Frame, no data terminal

Hi,
I just noticed when dropping a IMAQ AVI2 Read Frame vi in place of an older IMAQ AVI Read Frame vi, there is no "data out" terminal. I do make use of this feature to add data to the frames of the AVI. Is there supposed to be an alternative way to store this frame data, using the imaq image custom info perhaps?

Hello David,
You are correct in that the data out terminal is no longer available in the AVI2 functions. However you can use the IMAQ Read Custom Data and IMAQ Write Custom Data functions. These allow you to write and read custom data to the IMAQ images using specified keys. In this way you can add miscellaneous data to your images for later use.
Earl C
Applications Engineer
National Instruments

How do you change image size in the title window?

I just changed operating systems to Windows 7, which meant that I had to re install Premiere Pro CS4. I am now working on a 64 bit system. Might not make any difference, but thought I would give you the specifics just in case. When I pull up the title window to add a title to my clip, the image is about the size of a postage stamp. How do I increase the size of the image in that window?

Thank you again for responding Hunt. I did find out what what was happening.
I had to reinstall the program on my computer. I just upgraded to Windows 7, and I now have a 64 bit system. When I booted up PPCS4, I assumed that my settings would be the same as they were before when I had Vista installed and didn't bother to check them when I started a new project. Well, they were not. I also added a TV tuner card to my computer. I now can watch HD TV on my computer. I suppose that it is possible that somehow PPCS4 noticed that, and set my default settings to HD, rather than NTSC DV. I just merrily went along clicking the OK button and started editing. When I start a new project now, I select NTSC DV and the Title window works just fine, and exactly the way I expect it to.
I just received Jeff Bellune's book Adobe Encore DVD 2.0 in the mail and will be totally immersed in Encore studies today. With all of his children, I don't see how he had time to write it, but I'm glad that he did. I also ordered a book entitled Designing Menus with Encore DVD. I know that it was written for an earlier version than CS4, but I will trust what you said about that. Many things are the same with some minor variations due to upgrades in the program. The basic ideas don't change, but how you accomplish them can, and usually do over time.
Terry Lee Martin
Date: Mon, 17 Aug 2009 16:04:16 -0600
From: [email protected]
To: [email protected]
Subject: how do you change image size in the title window?
Welcome to the forum.
That is an odd one. The Title should be the same Frame Size as your Project/Sequence. What is it's Frame Size? Also, are you perhaps doing a Title based on an older Template, that was done for a different Frame Size?
What happens if you choose Title>New Title>Default Still?
Good luck,
Hunt
>

Best Practice for Image placement and Anchored Frames for use in Robohelp 9

Hi,
I'm looking for the best practices in how to layout my images in Framemaker 10 so that they translate correctly to Robohelp 9. I currently have images inside of Anchored frames that "Run into" the right side of my text. I've adjusted the size of the anchored frame so that my text flows correctly around the image. Everything looks good in Framemaker! Yeah! The problem is that when I link my Framemaker document to Robohelp, the text does not flow around my image in the same manner. On a couple of Robohelp screens the image is running into the footer. I'm wondering if I should be using tables in Framemaker in order to get the page layout that I'm looking for. Also, I went back and forth...is this a Framemaker question or is this a Robohelp question. Any assistance would be greatly appreciated.

I think Jeff is meaning this section of the RoboHelp forums:
http://forums.adobe.com/community/robohelp/robohelp_framemaker

How to view image size compared to Page size

In previous versions if you clicked the bottom left onthe frame of an image where the document size is you would get a small popup of an outline of the image size compared to the current page size. I cannot figure out how to see this in the new CS4 version. I've tried everything, help!

Hello Heiko,
I don't know, if it is possible, but I would say,
it's not implemented yet. Maybe you can change the picture size and use then the pictures, that might be a workaround, if you can't change the height and width in VC.
Best Regards,
Marcel

Image size and mime type.. non-java guy needs help

Image size, mime type.. non-java guy needs help
Im not at all familiar with java so this is really weird for me to work out. I?ve been doing it all day (and half of yesterday).
Im trying to write a custom clodFusion tag in java that gets the width, height, size and MIME types of a given file. I?ve been trying to get it to work on the command line first. I can get the width and height but cant get the size and the MIME type.
Here is what I got
/*import com.allaire.cfx.*;*/
import java.awt.image.renderable.*;
import javax.media.jai.*;
import com.sun.media.jai.codec.*;
import java.io.*;
import java.util.*;
public class ImageInfo {
private RenderedOp image = null;
private RenderedOp result = null;
private int height = 0;
private int width = 0;
private String type = "";
private String size = "";
public void loadf(String file) throws IOException
file = "80by80.jpg";
FileSeekableStream fss = new FileSeekableStream(file);
image = JAI.create("stream", fss);
height = image.getHeight();
width = image.getWidth();
System.out.println(height + "\n");
System.out.println(width);
System.out.println(type);
public static void main(String[] args) throws IOException {
ImageInfo test = new ImageInfo();
test.loadf(args[0]);
can anyone please help me out to modify the above so I can also print the mime type and the file size to screen.
thanks for any help

any suggestions?

Incompatible image size avi2 write frame

Similar Messages

Maybe you are looking for