Incomplete Numbers showing in Document Flow

Dear Experts,
I need a help from you. When I selecting document flow for a particular Sales Order then sales order number and invoice numbers not showing complete number. Example, my Sales Order number is 0000006690 but in document flow it is showing 000000669.
How can I resolve this problem?
Thanks in advance.
Best Regards.
Ripon Kumar Paul

Dear Experts,
No, I didn't modify anything and not even worked in user exit. For some document type it is showing total 10 digit numbers and only two order type it is showing less.
Any idea why this is happening?
Best Regards.
Ripon Kumar Paul

Similar Messages

  • GI not show in Document Flow

    Hi Expert,
    When display a Service order in IW33, normally can view GI at the document flow
    But my user facing problem where Document flow shows Operation, Confirmation, Sales order, Billing except GI
    This happen for a new Order Type that just implemented.
    Regards,
    Janice

    hi
    In case of service order . There will not be any delivery doc . Billing will happen on the basis of Service order. So there is no chnace of PGI.
    See during normal sales process While maintaining copy control between the doc says from sales order -> delivery -> Invoice . Please check the check box saying update document flow . This will keep track of all preceeding doc created .
    If in ur case deliery doc is there ( Which is not generally there in service cases) please check the check box Update doc flow (In copy control between the delivery and invoice ) Because PGI generate a Material doc No. and hence if u check this box it will keep track of this doc as well.
    Hope this helps.

  • Delivery document flow show as a Archived,

    Dear Experts,
    My some of delivery document show in document flow as a archived, I want to know, Why delivery document archived,
    I also want to not list of archived delivery document,
    Can anybody give me t.code for list of delivery document archived,
    Regards:
    Happy

    Hi,
    Are these delivery actually archived by archiving job? Is there any subsequent document after the delivery?
    Technically, if an delivery doesn't exist in LIKP table, but it exist in VBFA table, it will show "archived" in document flow.
    As of why the delivery doesn't exist in LIKP, there could be two possibilities:
    -  it's deleted by archiving job.
    - for unknown reason, it's gone.
    To know why it's gone, it's necessary to reproduce the issue. If you can reproduce, please raise a message to SAP support.
    What you need to do:
    - If this delivery is really archived by your archivng job, you should also archive the preceding sales document.
    - If this delivery is not supposed to be archived, but misisng, you need ot delete this dummy entry from VBFA table, and then recreate delivery.
    To get a list of this kind of archived document, there is no standard report or transaction to do that. You need to write your own report to do that. As mentioned above, technically, if delivery exist in VBFA but doesn't exist in LIKP, it will be displayed like that. You may selecting VBFA and LIKP tables to get your list.
    Regards,
    Harry

  • Document flow for contract creation

    Hi All,
        I have a requirement where i will create a follow on contract for a existing contract using a custom BDC, but i would like to have the document flow retained for the parent contract document. I would like to know if any FM or BAPI is available to maintain the document flow or any other process to do so.
    Pls treat this as an urgent requirement and reply.
    Thanks in advance

    Hi,
    I think it is quiet dangerous to add entries to VBFA tabel your self... but I saw that there is a function called RV_DOCUMENT_FLOW_ADD and RV_BILLING_INDEX_ADD. I do not know how to use it... but maybe with trial and error you can add the entries.
    What you can do is a work around by using a user-exit that show the flow you want when displaying it.
    T
    he function that show the document flow of an SD document is called RV_ORDER_FLOW_INFORMATION. In this function there are two user-exits and BADIs where you can add entries to be displayed according your logic.
    USER_EXIT für precedent docuents
      PERFORM USEREXIT_VORGAENGER.
    CALL METHOD l_sd_documentflow_exit->add_preceding_document
    UserExit + BADI for next docuemnts
    PERFORM USEREXIT_NACHFOLGER.
    CALL METHOD l_sd_documentflow_exit->add_subsequent_document

  • Report for listing all document flow for SD

    Hi expert,
    do you know any report from SAP or you have any sample report that can display and show all document flow for SD in one line...
    let say in selection screen i have contract number... so when i key in by contract number all detail and flow will display e.g
    conract  2000001 service order 3000000 delivery 4000000 invoice 5000000
    thanks.
    [SAP Notes & Tips|http://abap4beginner.blogspot.com/]

    hi,
    thanks for the solutions. Did others have experience on this situation?
    Thanks.
    [Abap Notes & Tips|http://www.abap4beginner.blogspot.com/]

  • 8D Report Document Flow.

    Hi All,
    After the upgrade to 5.0 we lost the document flow for the 8D Report. so whenever 8D report is attached to the notification it dont show the document flow. does anybosy faces the same problem? please reply ASAP. we already have applied OSS Notes 749201 & 750276 still its not showing up.

    Hello,
    You may have to develop the function module for this in ABAP capturing required details and assign this in action box.
    Regards,
    Anand Rao

  • Sales Document Flow - Ref. Value not showing correct currency

    I have a question about document flow currency in ECC6.0.  We recented upgraded to ECC6.0 from 4.7 and noticed the changes to document flow.  We are a US based company with sales offices in Europe.  Our European offices are finding that that document flow in ECC6.0 shows in base currency of USD.  Even thought the sales order was entered in EUR euros.  Is this intended to be this way; since it is causing our offices in Europe some confusion?  I searched forums an SAP notes and did not find any references.  Has anyone see this in ECC6.0
    Example Document Flow: Line Level (I do not see Ref Value at header level)
    Note Sales Document was entered in EUR euros.
    Document     Quantity     Unit     Ref. Value     Currency
    Standard Order 0025082768 / 10     12 EA     5,207.54 USD
    ...Delivery 0080211725 / 10     12 EA
    .....Picking request 20100423 / 10     12 EA
    .....Handling unit 0001221687 / 1     12 EA
    .....GD goods issue:delvy 4901261948 / 1     12 EA     1,690.08 GBP
    ...Invoice 0092006736 / 10                           12 EA     5,207.55 USD
    Accounting document 0092006736     12 EA
    If I highlight top line in document flow, I see the following in lower part of screen.  This is the currency entered on the sales order.
    0025082768     10          12     EA     3,847.80     EUR

    Smile,
    Thanks for pointing those configuration points out.   I checked my system and found the following.  I do not see any change documents for the configuration points, so they have been set this way since our implemenation in 2005.
    XD02 is customer master change, the customer on my order is set to EUR in sales in distribution tabs.
    OX02 - Company Code
    1000     Middleton     USD...ok
    2000     London     GBP   ok
    2100     Munich     EUR...ok
    2210     Amsterdam     EUR...ok
    4000     Hong Kong     USD...ok
    I think OVX5 is not set correctly, should be same as OX02.  If I change them, do I need to run an update in the system for old data?  Or is it as simple as changing the value here?  I'm hesitant to change this not knowing how this will affect the system.  Do you know?
    OVX5 - Sales Org
    1000     Middleton     USD...ok
    2000     London     USD   should be GBP
    2100     Munich     USD   should be EUR
    2210     Amsterdam     USD...should be EUR
    4000     Hong Kong     USD...ok
    Thanks,
    Tony Romain

  • Line item document flow shows net value of the item

    Line item document flow shows the value of the item with currency instead of the quantity.
    Any inputs on how this is getting displayed instead of the quantity being displayed?
    Additional information:
    In this case, the line item is a third party item with item category TAS.
    The document flow displays as follows..
    *Document                                             Date                           Qty/Value     UoM/Cur*
    *Standard order xxxx                              xxxxx                            34 170,00    USD*

    Dear Anand
    Go to VA02 or VF02, input the reference and execute.  Again go to document flow screen.  Now from top menu bar, click on "Document Flow --> View --> Items".  Now check the document flow.
    thanks
    G. Lakshmipathi

  • Document flow not showing material posted details in maint order

    Dear Frnds,
         In the refurbishment order document flow is not showing material posting documents. Plz guide me to correct the issue. Thanks for all your cooperation.
    Guruprasad KS

    Dear Thygarajan,
    Thx for ur reply. Goods issue button is been ticked in "Define Documentation for Goods Movements for the Order". Still same issue. It is working in different client so i hope not an IMG issues.Plz give ur valuable feedback.
    Guru

  • Why won't my printer print page numbers? The page numbers show up when I preview the document by don't print on the page.

    Why won't my printer print page numbers in a document? The page numbers show in print preview, but will not print on document.

    Perhaps you have set the margins so tight to the edge of the paper that you have gotten into the non-printing area for your printer. Most printers have a dead zone.
    What are your margin settings?
    Jerry

  • PO is incorrectly showing in other sale order document flow

    Hi expwrs please help me on this issue. One PO is incorrectly showing in other sale order document flow and there is no relationship between PO and sale order. Why it is showing incorrectly.

    Hi,
    First you check the SO created with reference and then check teh PO type (based on item category).
    I think with of any reference the PO will never show on doc flow,

  • Archived Deliver not showing Document FLow _RV_LIKP

    Folks
    I have started archiving for delivery object. I am able to successfully archive one document and can view the document in SARI and the only issue i am having is the when i open the archive document  the ICON which shows "DOCUMENT FLOW" is not click able so user is not able to see the document flow to find the Sales Order/STO# it was created from.
    In my customization for RV_LIKP under the setting "    Archiving Control for Delivery" i have put residence time as "5" and RNO "0"
    Also what is the RNO field  stands for .
    Thanks

    Hi Andy,
    Go through the link given below.
    http://help.sap.com/saphelp_40b/helpdata/pt/b7/19752690e211d1a5510000e82deaaa/content.htm
    The last line looks important.
    Deliveries should be archived before sales documents and billing documents. This sequence is a result of the way the documents are linked via document flow.
    Hope it helps,
    Regards,
    MT

  • Outbound delivery document flow shows TF document archived

    Hi folks,
    This could be a recurring problem.
    Case is regarding STO. The outbound del. is supposed to create an IB del. However for some reason this is not happening.
    When I checked the document flow, it shows "TF to stock in trans .49XXXX" AND  the status as "archived".
    Pl. let me know what needs to be done further.
    Thanks.
    Regards,

    Right Jürgen,
    However, what could have caused the deletion. Its a prod. env. and all of a sudden its happened.
    Whats the way out further for creating a PGI, I/B del. further steps.
    Regards,

  • Document Flow that shows Service Notification wrt Credit Memo Request

    HI all,
    Like VBFA, Is there any table that carries the Document flow of the service Notification and Credit Memo Request.
    Document Flow that shows Service Notification wrt Credit Memo Request.
    Help me on this.
    Thanks in advance
    Chakri

    What does service notification have to do with credit memo request? Nothing I think.
    Service notification shows after you hit post goods issue on a delivery document that does not have any goods movement. I think it shows in the document flow based on the GI status field, not based on a record like in VBFA.
    Regards
    Rad.

  • Document Flow incomplete

    Hi All,
    I am facing a strong Problem, when I create a Sales Order with
    Reference via VA01. To this new Order I add a new Position
    and save it. I expect, that I see the Sales Order and Position
    will be recorded in VBFA table. But The Position is not
    recorded in VBFA table. Any Ideas?
    Thanks!
    with my Best regards
    Beserithan Malabakan

    Hi
    1. Check the copy control
    2.  if everything is ok run the program SDVBFA01 and simulate if document flow entries are missing if so you can update document flow through this program
    Regards
    Jitesh

Maybe you are looking for

  • What application do I need to use to download Dreamweaver?

    I'm getting a message which says "This Link needs to be opened with an application"  which application do I need to choose?

  • Album artwork incorrect on ipod problem

    Hello I've got a 60GB iPod video and have never had a problem with it until recently which may or may not coincide with the upgrade to iTunes 7.... For some reason now on the iPod some album artwork is showing up incorrectly, for instance purchased m

  • Authentication for a particular ACL

    Hi, I  am trying to implement Authentication for a particular ACL on the ASA,  i.e. whenever that particular ACL is matched, the ASA will authenticate  the user with either local database or AAA server. I  have seen the document "Configuring AAA for

  • Status Record - Inbound

    Hi, I am using a custom FM that accepts Delevry02 idoc which is just being used as a place holder. I am updating me22 and va02 transaction after certain logic. When i checked the status of idoc, it is set to 50(idoc added). As it is a test idoc, do i

  • Expiry-delay: how to evict an entry without "touching" it?

    I have a cache (called pending mutation cache) with an expiry-delay set to 30 seconds and a listener (com.tangosol.net.events.EventInterceptor, EntryEvent.Type.REMOVED) configured on the same cache. The objective: when an entry is evicted, the event