Inconsistent CC indicator between master data view and MARC table

Hi All,
Recently I found strange thing, there are several materials without General Plant Data / Storage view, we did not create it, and CC phys. inv. ind is maintianed in this view, if we did not maintain this view, then this indicator should be blank in field ABCIN of table MRC. Right now I found in table it has value, but actually we did not maintain this this view.
Please check below:
If anyone could help on this?
Thanks,
Bruce

I found the root cause, if we set 'All materilas held in stock' by using MIBC, then this cc indicator will be changed, even you do not create plant/storage view for products, and also system will not create a change document, but I found one note could fix this which is 1672876.
I think for transaction MIBC should have logical of checking if that view already exist, if not, I do not think system should take those materials into account.

Similar Messages

Difference between materailized view and a table

hey hiii
i want to know what is a difference between a materialized view and a table i.e suppose i create a table A and another table B on table A i have created a trigger which will upload all the changes made in A ie insert,update or delete so whether this will perform all the action that a materialized view can perform on A or is there any difference between them
thks

I'll add to Nicolas' answer that the MV maintenance does have access to mechsnisms other than row-by-row replication of the trigger-based type. Direct path inserts to the base table are very efficiently propagated to the MV, as are partition-based DDL operations. Also MV's come with optional query rewrite built in (you need 10g+ to query rewrite to a non-MV data set), and scheduled refresh so you can defer maintenance of the data set until later.
MV maintenance can be less efficient though -- you may know something about the data and the way that it changes that allows you to write more efficient meintenance than the MV code.

Data view and data structure

whats the difference between a data view and a data structure

Hi
<b>View:</b>
Data about an application object is often distributed on several tables.
By defining a view, you can define an application-dependent view that combines this data.
The structure of such a view is defined by specifying the tables and fields used in the view.
Fields that are not required can be hidden, thereby minimizing interfaces.
A view can be used in ABAP programs for data selection.
http://help.sap.com/saphelp_47x200/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
<b>Structures:</b>
A structure (structured type) comprises components (fields).
Types are defined for the components.
A component can refer to an elementary type (via a data element or by directly specifying
the data type and length in the structure definition), another structure or a table type.
A structure can therefore be nested to any depth.
Structures are used to define the data at the interface of module pools and screens
and to define the parameter types of function modules.
http://help.sap.com/saphelp_47x200/helpdata/en/ac/3547360f2ea61fe10000009b38f839/frameset.htm
Kindly assign points for useful answers!
Best regards,
Thangesh

Master Data Text and Attributes

Guys,
I read some posts on sdn regarding differences between master data texts and attributes and now I am a little confused. I thought attributes define a char. then what does text do? Does it not define or describe the char as well? If both are doing the same thing then why do we need both ? I am not sure if my understanding is correct. Please help me.
Thanks,
RG

Hi Ram,
To understand in a better way little bit of R/3 work would have been helpful.
In R/3 Every entity has master data maintained like customer, material, plant etc.
If you would see a customer in R/3 you can see it has lots of information..like address,telephone number,street company name, etc.
And along with it we have customer name...i.e. description..(text)
Now in R/3...text tables are generally maintained separately then master data tables...it can be together as well.
Something like for you Ram Goswami is descrption(text) for the user ID XXXXXXX in SDN.
Email ID and company name is the master data stored here for him.
BW has used the same modelling concept to keep the text table separate from the msater data table.
It creates to separate data target for master data and text so that two seperate tables can be maintained in BW and you have to load the data in both to see the master as well as text.
Since we have separate master data table and text table in R/3 therefore we have separate data sources as well based on them.
You would like to have you master data table exactly as the master data table of R/3 so you will add attributes in the infoobject 0customer and it will create a P table for 0customer...keep adding attributes to make the columns in the table and to make the exact copy of R/3 table i.e. to bring all the information from R/3 about customer master you add attributes in the 0customer.The data soiurce based on this table in R/3 will contain the fields from the table.
Now you do the mappings with fields between infoobject and data source and load the data ...so master data is loaded.
For text...once you check the text option in infoobject..SAP creates a new table Tcustomer in the background..
Now you have to do the mappings for this as well through the data source based on the text table in R/3.
In some cases the master data table contains text as well and in that case you use the same data source based on this table to create two separate update rules one for master data object and another one for text object and do the mappings accordingly.
In this case you schedule the load to both the target at the same time and data gets loaded.
but for different data sources you will have to schedule the load separately.
Once data loaded for this...now you can use it in the report and see the text as well as master data attributes in the reports and there values.
I hope that was more then enough
Thanks
Ajeet

Abt master data activation and attribute change run

There is any difference between master data activation and attribute change run

Hi,
Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
For attribute change run we have direct tcode: RSATTR or In the main menu, choose the path Tools Hierarchy/Attribute Change.
regards
KP

Diffreence Between Master Data and Transcation Data

Hello Friends,
What is the Difference Between Master Data and Transcation Data.
i know only one differnece,,ie,,
Transcation data modified frequently and Master data are not modified frequently..
can any one tell the other difference..

hi check this..
MASTER DATA=>
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRANSACTION DATA=>
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
regards,
venkat

Merging Basic data View and Classification View in Material Master

Hi,
There is a requirement to append Classification View under Basic Data View and then finally to delete Classification View.
As per my understanding, it is not possible. Please let me know if it is possible, if so, please let me know how is it possible.
A quick response is appreciated.
Thanks & Regards
Bhaskar Baddela

Hi,
Refer the thread: Problem creating Material Master sales view with LSMW which discuss the same issue. You may check and revert back.
Regards,
AKPT

Difference between master data and transactional data

Hi experts i have just started learning BW can u plz let me know the difference between Master data and Transactional data in bw ? and why is master data is first loaded before the transactional data ? thanks .....

Hi
Transaction data represents any transaction occured between two parties like Customer and Vendor.
We maintain id's to maintain the Customer and Vendor.
When we look at the id we don't have a clue like who is the customer, where does he live,,....
So all this info is maintained in Master data in three categories:
1. Attributes
2. Text
3. Hierarchies.
Collection of Attribute, Texts and Hierarchies is called master Data in BI/BW.
Eg: 0MATERIAL, 0CUSTOMER,,,,,
Master data: is data that remains unchanged over a long period of time. Master data contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/58/a4513ce4af0a40e10000000a114084/frameset.htm
Master Data is one form of the historical data. There is no frequent changes in the data.Every application has it's own Master Data.
In BI the master Data has been divided into
Characterstics
Texts
Hierarchies
We can load Master Data through different ways.
Pls. find the below link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/58/a4513ce4af0a40e10000000a114084/frameset.htm
hope it helps u
regards
gaurav

Any difference between Master data and User master data ?

Any difference between Master data and User master data ?

hi
A user master record defines the authorizations assigned to a user. Based on these authorizations one can access the master data.
Master data - it is the data which is used long term in SAP r/3 system such as vendor master , material master, customer master,
there is no such thing like user master data to the best of my knowledge
hope this helps
regds
Manan

InfoProvider: infoObject (master data attribute and text)

I saw info Object of master data attribute and text in InfoProvider.
are infoObject act like a table when we do query on them.

Hi
Refer to this as down
Custome Infoobjects Tabels:
/BIC/M -- View of Master data Tables
/BIC/P -- Master data Table, Time Independent attributes
/BIC/Q -- Master data Table, Time Dependent attributes
/BIC/X -- SID Table, Time Independent
/BIC/Y -- SID Tabel, Time Dependent
/BIC/T -- Text Table
/BIC/H -- Heirarchy Table
/BIC/K -- Heirarchy SID Table
Standard Infoobjects Tabels(Buss. Content):
Replace "C" with "0" in above tables.
Ex: /BI0/M -- View of Master data Tables

Reporting on Master Data From and To

Hello Experts,
We are trying to report on the From and To dates of a time dependent infoobject 0FUND. We have turned the infoobject on as a dataprovider but we dont see how you report on the two dates. When we try adding 0DATETO to the attributes tab we get an error saying "attribute cannot be used with time-dependent attribute". Next i tried mapping in a Z infobject but I could not get the object to populate with the Date To data. What is the trick to getting these date fields in a query?
Thanks,
TMS

Hi,
Create Z objects for both dates. Create a Z object for master data objects "Fund".
Add these two Z objects as attributes in master data Z object.
Create as infoset with Orignal master data object and Z master data object.
Use Infoset to create report.
I hope it will work.
Thanks,
S

Reporting on master data customer and bad performances : any workaround ?

Hello,
I've been asked to investiguate on bad performances encountered when performing reporting
on the specific master data zcustomer.
Basically this master data has a quite similar design that 0customer, there are 96000 entries in the master data table.
A simple query has been developed : the reporting is done on the master data zcustomer and its attributes : no key figure, no calculation, no restriction ...
Nevertheless, the query can not be executed .. the query runs around 10 minute in rsrt, then the private memory is exhausted and then a short dump is generated.
I tried to buid a very simple query on 0customer, this time, without the attributes ... and it took more than 30 sec before I get the results.
I checked the queries statistics :
3.x Analyzer Server 10 sec
OLAP: Read Texts : 20 sec
How is it that it is so long to performthe reporitng on those master data, while in the same time If i try to display the content in SAP by choosing "maintain master data", I have an immediate answer.
I there any workaround ?
Any help would be really appreciated.
thank you.
Raoul

Hi.
How much data have you got in the cube?
If you make no restrictions, you are asking the system to return data for all 96.000 customers. That is one thing that might take some time.
Also, using the attributes of this customer object, fx making selection or displaying several of them, means that the system has to run through the 96.000 records in masterdata to know what goes where in the report.
When you display the masterdata, you are by default displaying just the 250 or so first hits, and you are not joining against any cube or sorting the result set, so that is fast.
You should make some kind of restriction on other things than zcustomer (time, org.unit, version, etc, to limit the dataset from the cube, but also a restriction on one of the zcustomer attribs, with an index for that maybe, and performance should improve.
br
Jacob

Difference between Data staging and Dimension Table ?

Difference between Data staging and Dimension Table ?

Data Staging:
Data extraction and transformation is done here.
Meaning that, if we have source data in flat file, we extract it and load into staging tables, we take care of nulls, we change datetime format etc.. and after such cleansing/transformation at then end, load it to Dim/Fact tables
Pros: Makes process simpler and easy and also we can keep track of data as we have data in staging
Cons: Staging tables need space hence need memory space
Dimension Table:
tables which describes/stores the attribute about specific objects
Below is star schema which has dimension storing information related to Product, Customer etc..
-Vaibhav Chaudhari

DB link problem between active Data Guard and report application database

My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?

Fazlul Kabir Mahfuz wrote:
My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?
Check this note which is applicable for your environment
*ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
also
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

Mapping between oracle data types and ms sql server data types

hello
i need mapping between oracle data types and ms sql server data types
where can i find them ?

read this
http://download.oracle.com/docs/cd/E10405_01/doc/appdev.120/e10379/ss_oracle_compared.htm

Inconsistent CC indicator between master data view and MARC table

Similar Messages

Maybe you are looking for