Incorrect currency in R/3 after change
Hi all.
SRM 4.0, server 5.0, extended classic scenario.
I have a situation where a currency and price change in SRM should be transfered to R/3 - the price itself is transfered fine, but the currency is not changed in the R/3.
Example.
PO is created with 1 item in SRM:
10 USD
In R/3 it is also 10 USD.
Now in SRM I change it to 5 EUR instead.
In R/3 it is now 5 USD.
I have tried searching for notes, but they only seem to relate to incomplete prices and not currencies - here the price update is fine, but the currency remains the same.
Any suggestions?
Thanks.
DM
Hi
Which SRM version / Scenario are you using ?
Are you using any BADI Implementations ? Check using SE19 Transaction (name starting with Y or Z).. Take help of ABAP resourcein this case.
<u>Also, Please try the following SAP OSS Notes, which will definitely help -></u>
Note 1000725 - Incorrect Currency Conversion for PO created from SC- ECS
Note 970992 - Purchase order currency overwritten by partner dflt currency.
Note 530618 - Incorrect conversion to vendor currency in purchase order
Note 970839 - Incorrect price in R/3 if currency & price is changed in SRM
<b>Related links -></b>
Re: PO Dates in US/EURO format mismatch
PO in R/3 to take SC currency?
Currency configuration in classical scenario
Currency USD differs from Purchase order currency EUR. Enter in PO currenc
Local PO is created in vendor currency in ECS scenario
problem when using EUR in FM CONVERT_TO_LOCAL_CURRENCY
Local PO is created in vendor currency in ECS scenario
Do let me know.
Regards
- Atul
Similar Messages
-
Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/ -
After changing my computer from a mac mini 2009 to a late 2012 version, all reloaded with Time machine, Lightroom works fine but Photoshop elements refuses to start (error code 150:30; "license no more valid"...). No solution found on the internet works. Any advice ? possibility to reload the application (I have kept the number of license etc.) ? Thanks in advance to anyone who could help.
Alain Picard this error often occurs due to incorrect file permissions or corruption of licensing data during the Time Machine restore. What version of Photoshop Elements were you using? I would recommend that you remove and reinstall it using the uninstaller located in the Applications/Utilities/Adobe Installers folder.
-
ICloud status not displayed correctly after changing tags
Hi everybody,
I have just below 25 000 songs in the iTunes library that I use for iTunes Match (my complete library is actually much larger but I created a separate library to stay below the 25 000 songs limit).
After changing some tags in iTunes (I had some artists listed twice, once in the format "<last name>, <first name>" and once "<first name> <last name>" and wanted to harmonize this) the iCloud status of most of my songs is no longer displayed correctly. If I create a smart playlist containing all "matched" songs it finds only about 1000 songs, a playlist for "uploaded" songs contains only about 250 songs, the vast majority of my songs simply have NO iCloud status whatsoever (not even "waiting").
Trying to fix this, I selected all of my songs, option clicked and chose "Add it iCloud". After waiting some time, nothing changed. The funny thing is: iTunes match reports that 24 669 songs (the correct number) are available in iCloud.
So basically everything works and I am also able to download all of my songs on my iPhone. Still, it's a little bit annoying that the iCloud status is not displayed correctly and smart playlists filtering for iCloud status don't work. Does anybody know a way to fix this?
Thanks for any help,
AndreasThe reason why the C3850 switch stack is showing as standalone in LMS CiscoView is because
it's returning sysObjectID as standalone.
It should return as 1.3.6.1.4.1.9.1.1745 --cat38xxstack
While, if you poll it for sysObjectID, the Catalyst 3850 stack switches will be returning OID 1.3.6.1.4.1.9.1.1641.
This is an IOS bug "CSCul00003 - Incorrect Sys OID for Cat3850 Stack device".
Unless this bug is fixed, LMS will not be able to show it as stack device.
You can try to check if you can manually change the device identity to cat38xxstack from Inventory > add/edit device > edit identity.
Else we need to wait for the fix of this bug.
-Thanks
Vinod -
ORA-12545 error after changing the host name as IP address in Tnsnames.ora
HI,
I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
Seems you specified wrong IP address. -
Dear All, Good day!I just I really need your help badly with regard to my phone. I used to charge the battery of my phone using USB cable on my laptop and today morning my phone is working just fine, but I was running out of battery so I tried to charge it. After few minutes, when I am about to use it, the lock code is not working anymore. I didn’t changed my password or done anything new and I am 101% sure that I have entered my password correctly. However, there’s a message showing : WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased." The screen shows Incorrect Password (6/10), but I am entering my correct code again and again and still not working. I restarted it many times and still showing the same thing. Now, I can’t get in and use my phone. I tried to call my number and it still reachable. Thank you so much in advance
To: JSanders, Hi there! thanks for spending time reading my queries and replying on it.YES! I am 101% positive with my security code. Thank God I was able to recover it and use my phone again. Just an input for those who might experience the same thing. Using Black Berry Z30, once you have the dialog box saying:WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased." and shows that you still have atleast 3-4 available chances to enter the code, just type "blackberry" thereafter another screen will pop-up and will ask to enter again your password. As long as you are 100% sure about your password, you'll be able to enter and get it back. Now, I am enjoying again my Z30.
-
Incorrect currency conversion in backend PO in ECS
Incorrect currency conversion in backend PO in ECS
we have implemented enhanced classic scenario and we have a problem
with incorrect currency conversion in backend purchase order.
- Shopping cart was created with 1 EUR
- held PO was completed an ordered with 1 EUR
- ordered PO was changed to USD. Price in the position was converted
automatically to 1.20 USD
- price in the backend PO is 1.28 USD -> this is incorrectKindly apply the below notes and check the issue.
970839
850335 -
Error after changing datasource
Hi Experts,
one of our test systems (IDES) with doule stack including NW Portal is connected to the client 001.
As we have a lot of users in the client 800 we want to change the configuration of the UME to client 800.
We used this SAP Help Link:
[Configuring the UME to Use an AS ABAP as Data Source|http://help.sap.com/saphelp_nw70/helpdata/de/9e/fdcf3d4f902d10e10000000a114084/content.htm]
After changing the Client in the useradmin page of the J2ee UME configuration - a connection test runs successfully.
But after restarting the server:
Server is stopped - Dispatcher is running but no server connected.
dev_jcontrol:
[Thr 3440] JControlICheckProcessList: process server0 started (PID:2008)
[Thr 3440] Mon Sep 29 16:34:14 2008
[Thr 3440] JControlICheckProcessList: process server0 (pid:2008) died (RUN-FLAG)
[Thr 3440] JControlIResetProcess: reset process server0
[Thr 3440] JControlIResetProcess: [server0] not running -> increase error count (4)
[Thr 3440] JControlICheckProcessList: running flight recorder:
std_server0.out
[Framework -> criticalShutdown] Core service security failed. J2EE Engine cannot be started.
Sep 29, 2008 4:34:12 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_39] Fatal: Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.
dev_server0
[Thr 5748] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 6092] Mon Sep 29 16:34:09 2008
[Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 6092] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 5064] Mon Sep 29 16:34:12 2008
[Thr 5064] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 5064] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
My first thougts were to check the RFC/JCo connections - so I changed the configuration to the old one via ConfigTool - UME.Services - restarted the J2EE engine.
Log to SM59 and Configtool. I regenerated the JCo Connection for sapfallback (was not available) and to the portal itself - Tested the connections in SM59 TCP/IP - successfully tested.
So i tried the changes again (client 800)- with the same errors as above?
Any idea what causes this misbehaviour? Or is the SAP help link only for initial setting of UME? Are there additional steps when changing from one ABAP Host (or client) to another?
Thanks in advance
kind regards
TomSometimes I`m a mess!
Look at default trace error:
#1.5 #005056827C490074000002DB00000A08000451F31E6385D7#1216004535546
#com.sap.security.core.persistence#sap.com/irj#com.sap.security.core.persistence.[cf=com.sap.security.core.persistence.datasource.imp.R3Persistence][md=populatePrincipalDatabag(AttributeList)][cl=null]
#J2EE_GUEST#0##n/a##2ce6913050ba11dd8d2d005056827c49#SAPEngine_Application_Thread[impl:3]_6##0#0#Error##Java###
An exception was thrown in the UME/ABAP user management connector. This exception might be caused by incorrect user input.
It is written to the trace to assist incident analysis by SAP. Only messages also appearing in the log require administrator assistance.
[EXCEPTION]
#1#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=localhost SYSNR=00 GWHOST=localhost GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '127.0.0.1:sapgw00' not reached
TIME Mon Jul 14 05:02:15 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 82
at com.sap.security.core.persistence.datasource.imp.r3persistence.R3JCo640Proxy$Client640.execute(R3JCo640Proxy.java:465)
at com.sap.security.core.persistence.datasource.imp.R3Persistence.doBapiUserGetDetailInternal(R3Persistence.java:5238)----
Any ideas?
kind regards
Tom
Update:
- the host file contains localhost and service file contains sapgw00 with 3300/tcp?
- the java stack runs unter https, http is only available for localhost, may this be the problem?
- Which JCo connection causes this error - actually there are three JCo Connections maintained in VA - .. - JCo RFC Provider - NONE of them connects to localhost??
Edited by: Tom Uhl on Oct 10, 2008 10:12 AM -
Master-detail: detail field not displayed after changed by master field
I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.Wouter,
I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
Steven Davelaar,
JHeadstart team -
Message Server Unreachable (after changing IP address at host)
Hi guys,
I changed the IP address in my server. According to note 403708, I updated the new IP address in /etc/hosts. The note also suggests me to change in /etc/services but I see no IP address for me to update.
Later when I restart my sapinstance, I see the disp+work.exe is "Running, but Message Server Unreachable". I've also updated the IP address in SM59 but I see no change.
This is what I got from dev_rfc.trc:
ERROR file opened at 20071206 221839, SAP-REL 620,0,674 RFC-VER 3 549374 MT-SL
T:5048 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1400
T:5048 <* RfcDispatch [1] : returns 1:RFC_FAILURE
This is what I got from dev_disp:
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
Anyone has any idea?Yes I'm on Windows, the path that i'm refering is:
winnt/system32/drivers/etc/services
winnt/system32/drivers/etc/hosts
Anyway my prob is fixed now. Probably the problem is due to I did not restart the server after changing the IP. Anyway everything looks pretty fine now
Thanks guys -
Internet very slow after changing my previous airport extreme to my new 2T TC
Hi,
I just got a new 2T time capsule to replace my Airpot Extreme that worked fine. After installing it I chose to import a previous wifi network to the new TC and my internet became very slow. I read a few online documents sugesting that the internet slows down when backing up large data, but I dont think it is backing up (I did a force quit on systems preferences that "froze" with the cursor becoming a spinning ball) and after that tryed to restart my mac pro, but it has been recovering space from file vault for 2 hours. I am trying to access the internet from my mac air, but the speed is 10% of what I usually get.
Any suggestions? Starting to regret getting the TC, I had high expectations about it.
Thanks
RubensThanks William.
I got help from Apple by phone and aparrently after importing the old airport extreme configurations, my time capsule ended with wrong "Radio channel selection" and after changing the 2.4Ghz to 9 and the 5Hhz to 157 the internet connection is back to normal. thanks -
How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed by the former husband and you don't know what it is now? And you set up your own new ID and account but can NOT access the updates, from the App store for the many apps that you already have, because they require that you sign in with that former now inaccessible ID and account and password? Call it a problem of modern times and changing relationships, if you want to be charitable.
So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
Yes... sorry.
In the future, if need be, you can re download your purchases for free > Downloading past purchases from the App Store, iBookstore, and iTunes Store
Good rule of thumb is to back up your purchases regardless > Mac App Store: Backing up your app purchases -
HT5624 How do I update my Apple ID on iPad and iPhone after changing it?
How do I update my Apple ID email address on iPhone and iPad after changing the email but not password. I have verified my new email on iPhone iPad and iMac but settings on all for iCloud still show my old email address. I can't use anything now that needs my Apple ID
Hello there, Chivs86.
From what it sounds like you are wanting to sign out of iCloud with the "old" ID and sign in with the new. The following Knowledge Base article should help you with that issue:
iCloud: Features that work with one account at a time on iOS 5 and OS X Lion or later
http://support.apple.com/kb/TS4020
Specifically:
To change a secondary account to a primary account
iOS 5 or later:
Tap Settings > Mail, Contacts, Calendars.
Delete the secondary account.
Tap the Back button.
Tap iCloud.
Delete the primary account.
Add the secondary account that you want to be your primary account.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
How can we remove the space after changing look and feel to generic
Hi
I want to remove the space which left blank after changing look and feel to generic in formsweb.cfg file.
Can anybody help me to remove this blank space.Hi,
can you be more specific on teh space you mean?
Frank -
after changing broadband suppliers I have a new email address. I therefore had to change my apple id. It won't change on my iphone even after syncing. What should I do?
Follow this procedure:
1. Go to Settings > iTunes & App Stores > Apple ID.
2. Tap your Apple ID
3. Sign out
4. Sign in with your updated Apple ID.
Maybe you are looking for
-
Hi team, please help me how to deploy creative cloud desktop application through SCCM for an enterprise
-
Hello, expert, I have made SOAP adpeter work in PI 7.0, however after upgrading to PI 7.1, I have issue with a test scenario as following. I've defined DT, MT and SI (Service Interface) in ESR (no mapping needed) In ID, I configured a scenario SOAP -
-
Why doesn't Apple have their own branded HDMI to Mini cable?
I just bought a second 27" monitor (not a Thunder Display) with HDMI connectivity, but I have to buy an off-brand cable to connect to my iMac. What gives?
-
I'm running a dual 2.5 ghz G5 w/ 10.3.9, using FCPHD. I was editing last night and everything was perfectly fine. This morning I get up, and now my external video doesn't work. I'm using a Sony DCR-TRV17 minidv camcorder. The video clips run fine in
-
HT204088 How do I cancel a recurring payment?
How do I cancel my recurring payment for pandora one?