Incorrect delivery date for third party sales order

Hi,
When I create a Third party sales order, the delivery date refers as todayu2019s dates, but when I save the order the same is getting copied in to Purchase requisition and subsequently to Purchase Order and is not recalculating based on the Planned Delivery time maintained in the Purchase Info Record.
Is there any configuration setting to enable re determine the delivery date in PR?
Regards
Raj

Hey babu,
I understand ur problem. First check that you have maintained all the time durations that would be taken into consideration when the sales order will do the scheduling. E.g.
!) GR processing time
2) Planned delivery time
3) Purchase dept processing time ... etc
Now you need to check if scheduling is taking place on the sales order. That means, does it show you the date that can be confirmed for delivering that 3rd party item when you press enter after entering its material number and the order quantity.
1) If yes you need to check the box that says "Fix time/quantity" on the availability check screen that pops up when you place the order.
Now the system will pass this new scheduled date to the production order, but it will show the requested date as the one determined from the lead time in the order type. so no need to worry.
also if it is not showing you the availability check screen and automatically using a date scheduled in the future based on the values you set in PIR, in that case yo need to go to the item details > schedule lines > and check the box that says "Fix time/quantity" for that 3rd party materials and the confirmed date will be passed to the PO automatically.
2) If no then you have to make sure that availability check is turned on for that material and then try placing the order.
Regards,
Vinit Parkar

Similar Messages

Delivery date in Third party sales order

Hi,
If a sales order is created on 15th of October with TAS item category, system is proposing the delivery date as 22nd October. PR was released on 20th of Oct after backward scheduling and the plnd delivey time is 1 and GR time is 1 and the 18 & 19 are holidays.
Could any body clarify me why system is not considering 16 & 17 for PR release?
How the system proposes the delivery date as 22?
I kindly request you to clarify.
Warm Regards,
Sridhar Burugula

Dear Venkateswarlu,
Many thanks for your reply.
I have checked the document type (order) and the lead time mentioned is zero.
Could you please help me in this regard??
Warm Regards,
Sridhar

Delivery status for third-party-sales

Hello,
because of a customizing error our US colleagues created several sales orders with a open delivery status even no delivery is requested for third-party sales orders.
Does someone know a solution how to complete these documents without creating the delivery note? We now changed the schedule line category to solve the problem for the future but we have to find also a solution for the existing documents. Our colleagues want to change the table for VA05 to deselect the item category third-party. But in my opinion we have to complete the documents it selves.
Thanks for your help.
Regards,
Kirsten

put a Reason for rejection in sales order and save the document. you no longer can use these documents.
hope this help.
reward if helpful.
regards,
seshu.

Configuration for Third Party Sales Order

Hi All,
I would need some advise on how should I go about to configure a third party sales order. The MM consultant has configured a special item category for it but the sales order has some incompletion data error where the schedule line could not be maintained.
Kindly advise.
Thanks

Hi Lee,
Pls go through the following links below:
[Third party sales order|http://www.sap-basis-abap.com/sd/third-party-order-processing.htm]
[configuration for Third party sales order|http://www.saptechies.com/process-flow-for-3rd-party-sales/]
Hope these helps you.
Regards,
Krishna.

Cost value for third party sales order scenario

Greetings, I have a cost question involving the Third Party Sales Order (Item category TAS).
At billing (VF01), the cost being picked up by the system are the value from the PO (PBXX condition type). I would like the system to pick up the entire COGS value (inclusive of freight values) posted at MIGO.
Ex. If Purchase price is 100 and freight is 20, I want 120 (the COGS value) to be shown in the cost field. It currently shows 100.
The steps I follow are
1) Create OR sales order (item category TAS)
2) Create PO referencing PR
3) Goods Receipt D 120 COGS/ C 100 GRIR /C 20 freight
4) Outbound Delivery (Confirmation only)
5) Billing (Costs showing 100?!)
Again, only the PBXX condition type value (From MM Calculation Schema) is being picked up.
How can I get the system to pick up the freight value as well?
Regards
Ken

Hi,
If you bring the Freight condition after PBXX and include in the net value, your problem will be solved. so it will be 120 in MIGO, MIRO, Dellivery and VPRS in billing.
We have the same situation and its working fine for us.
Thanks
Krishna.

Purchase Requestion for Third Party Sales Order

Hello Team
I want the system to create Purchase Requisition automatically and some times Manually (Possible if both Option are available) for the Sales Order which belongs to Third Party.
How to achieve this?
Thanks
Nick

Hi Nick
Following are the steps of third party:
1) Creation of third party sales order
2) Generation of automatic purchase reqisition through the configuration of schedule line CS in SD.(schedule line is determined by the item categoty and the mrp type.
please dont maintain mrp type in the material master.so that it will determin CS directly.
in the tcode VOV6,please check whether the document type NB is maintained for CS.
This will created auto PR).
3) You can check the PR Number in the schedule line tab of sales order.PR requirement will not be available in the MD04.
4) Manually create a PO for vendor with item category S.
5) There will be no GR in this case.
6) Create an invoice verification document.
7) Create an invoice from the SD side w.r.t Sales order.
Hope this might have answered ur question
Reward if useful
Shawn

Proforma invoice for third party sales order

Hi,
How can we create a proforma invoice F5 and then standerd invoice F2 to a third party sales order.The billing relevance for TAS item category is set to B i.e.Relevant for order-related billing - status acc.to order qty
Points will surely be ragarded.
Regards
Edited by: Mrunal Ambatkar on Mar 5, 2010 5:00 PM

Hi,
Please check whether copy control (VTFA) settings between Sales order type (OR) and Proforma Invoice (F5) is avaiable.
If there is copy control setting available you can create the Proforma Invoice based upon sales doc type.
regards
Vivek.

Delivery Date for PR in Sales Order

Dear All,
We have a case where Sales order will trigger a Purchase requisition when the Material is non-stock.
But when looking at the Delivery date for the Purchase Requisition in the Sales order, the delivery date is always the creation date, which is incorrect, the correct date should be calculate based on the planned delivery date in the material master.
Sales Order--> schedule lines --> Purchase Requisition
Thank you very much,
Regards,
Chee Wee

Dear Ravi,
Sorry, i did a tried to convert a PR into a PO, and which PR was triggered from SO.
The delivery date in the PO still the SO creation date, which is the same as the PR delivery date.
Can you please advice?
Thank you very much,
Regards,
CheeWee

Question about: Auto PO generation for third party sales order

Hi all,
Not sure if this is the right place to leave this question but giving a shot.
In Sales Item category we have a check box called generate auto po. By reading the help i came to know that it generates PO and/or Purchase Requisition automatically on saving the Sales Order. It is also said that we need to make some ALV setting. Can any one lead me how to configure the setting,so that i can be successful in knowing about Third party Orders.
Thanks & Regards
Mukund

Hello Mukund
It is talking about ALE- Application Link Enabling - not ALV. That is if you have distributed applications and use ALE to communicate between them. I don't think you need to do anything else. Just go ahead and test it. And if your MM Purchasing master data is set up correctly, you should be able to see the message about PO creation when the sales order is saved.

Third party sales Order processing

Hi gurus,
During Third party sales order processing, Purchase requision has been generated with account assignemnt category 'X',
While converting the Purchase requisition to Purchase order the system is not allowing me to save the purchase order,
As soon as i hit the save button the Pricing conditions are being deleted in purchase order ?
When i hit the save button again System is throwing me out giving a message
System error (error in method PO_CHECK)
Message no. ME816
This is happening only when a purchase order is being created for third party sales order processing.
Has any one faced this issue before, if yes please advise gurus,
Thanks in advance,
Kind regards,
Gopio.

Hi
The account assignment category X has been maintained in
schedule line category CS and it is recommended by SAP
Yes perfectly right
SAP recommends only X as account assignment category for CS
If the PR is created successfully then there is no problem with related to SD configurations
The error message is more of an MM error
You need to check with an MM expert why that happens while creating PO from PR
I feel since this happns while saving the transaction there might be some userexit used which may be root cause
System error (error in method PO_CHECK)
Message no. ME816
As per my knowledge this is not a standard error
Because of activation of some userexit this is triggered
Functionally this is a MM area error
From SD side everything is correct
Regards
Raja

Distribution channel for third party sales

Hello Gurus,
May I know what is the distribution channel or type of it I should or could use for third party sales order creation?
I have configured the ITC etc but not sure the distribution channel to use from the standard SAP provided ones.
Or I can use any without affecting the process?
regards
Bass

You can use any without affecting the process.
3rd party process is controlled by - item cat. group, item category, schedule line cat., etc.
At some places, separate order type or dist ch are used only for Reporting purpose.
Thanks

Route is not considering in delivery scheduling for Third party order proce

Hi All
Advance thanks for your inputs
We need to consider the route in the delivery scheduling for third party order processing..
Example
i have standard order (document type OR) when i have item cat TAN its considering the route for ariving the material availability date, if it has TAS(third party) then its not considering the route......
But we want to consider the route in deliver scheduling in case of third party order...
kindlly pls advice..
regards
raja

Hi Viven.,
Routes they come under normal order as we deliver the goods,but here in TAS,third party sale we are not delivering the goods,Just there is logical moment i.e MIGO,So i dont think we do routes for TAS
Thanks & Regards
Narayana

How to know Delivery Note no. for Third Party sales

Hello Experts,
I am configuring Third party sales process.and got the suffcient help from old posts.But i got stuck in MIGO step.While doing MIGO we have to enter PO and Delivery Note No so where to find delivery note no.?
Another confusion is, In some of the posts in community,for third party sales configuratuion MIGO is one of the step while in other similar posts there is no MIGO step instead they have shown direct MIRO after PO creation so which i should follow ?
Thanks in advance
Regards,
Vikal

Do you really just follow what others have posted and do not double check with the SAP documentation and even more important with your business needs and some logical thoughts?
In all our >750 plants is a guy who receives the material that is coming in, he compares the paperwork with the goods and then enters the receipt in SAP.
This is the normal and logical process of a receipt in your warehouse.
And now compare this with a 3rd party sales, where the goods are shipped from your vendor directly to your customer.
The warehouse guy does not get any papers from a truck driver, he can't count any goods before he could do something in SAP, he does not even know about this order. And exact this situation is the basis for the standard design: no goods receipt, just invoice.
And any deviation is made because of some special requirements (legal and country specific, or just because of an almighty finance department which can't understand that some of their requirements do not make much sense in logistics. e.g. mandatory 3way matches PO - GR - IR which is not worth the name if you force warehouse people to make theoretical receipts which physically never happened and cannot be verified.

Conditiuons needs to be ZERO for creating third party sales order.

Hi Friends,
we are creating third party sales order, which triggers PO automatically based on the outline agreement.
before saving the PO , i needs to set ZERO for cretain condiations.
please let me know how to solve this. means any user-exits are to solve this or anmy BADIS.
REGARDS,
vIJAY

Hi Satya,
i am creating Project for EXIT_SAPMM06E_006... but it asking Enhancement Name. and also creation steps and implement steps.
which Enhancement that i want to implement.
pls help.
regards,
Vijay

Prevent Third Party / Sales order stock for blocked vendors

Hi Experts.
We have scenarios for Third party processing and Sales order stock. We have a scenario of a fixed vendor for a material. The purchasing function frequently does block vendors for purchasing.
However, we find that this does not prevent creation of a third party / sales order stock item in the sales order and a PR is generated. It is only found during the PR --> PO conversion that the vendor is blocked at which time someone has to manually reject the line items.
Is there a way to prevent the system from being able to generate a PR for a blocked vendor ? I guess one possibility is to enhance the requirement routine for PR creation. Is there any other approach ?
Appreciate your help
Regards
Rohit Zalani

Hi
In MK05, block vendor for all Purchasing org and Select Block Function = 03 Block quot. req., order, goods receipt
If you do this setting then user will get error message that "Vendor is blocked" and "Purchase requisition could not be generated for component".

Incorrect delivery date for third party sales order

Similar Messages

Maybe you are looking for