Incorrect Release code called which is not defined in a Release Strategy!

Dear Gurus,
I am facing a problem in Release strategy for a specific Purchase Requisition document type. My Release Strategy has two Release Codes for the Approval of a PR. When i create that document type of Purchase Requsition, Same Release Strategy is called, system picks the Two release codes from my Strategy but also pick another Release code which is not defined in my Release Strategy.
Kindly help me and let me know.
Thanks in Advance.
Johi Kapoor

Hi,
In Release Simulation (segment of Release Statergy), just click and you will have small pup up screen and there just double click the release codes all you have and you can see all unwanted release codes will be dissapeared and you have only now needed release codes what you configured for the release statergy. Now similuate release & set/reset release .
Regards,
Biju K

Similar Messages

IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.

I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
 at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
 at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
 at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
 at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
 at $Proxy2.modifyx(Unknown Source)
 at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke

THanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code"));

Order is showing in T code# VKM3, which should not happen.

Client using automatic credit check. Customer maintained credit master data for which system is doing credit check. As per client requirement the future orders created for this customer system should not do a credit check.
For this we have created a new risk category and in the T code #ova8 , unchecked all the settings for this combination of credit control area, risk category and credit group. We maintained the new risk category in the credit master data of that customer, and created a new order and found that the system is not doing any credit check and system is allowing for the billing. However when but this order is showing in T code# VKM3, which should not happen.

Hi- SAP always shows orders in VKM3 even though they do not have credit hold... SAP lists all orders which have item cat deliver or billing relevant..
Reg
Siva

Vendor payment doc type KZ looking for account type A which is not defined

Hi Experts
We are processing a Vendor payment where discount is received, howeve, the message "For document type KZ, account type A is not defined' in the job log.
Can anyone please put some light on this error.
Many thanks
Kind regards
Dawn

Hi,
T-code OBA7: there it is defined which doc. type is allowed to use which acount types.
SAP standard for KZ is to use vendor + GL account types.
So check your document that you are going tro post or, if you think its ok, post the same document in a test client and enable doc. type KZ in OBA7 to be used with asset account types to view the result of your posting.
Best regards, Christian

GL display for inventory account which are not defined as line item display

Hi All,
We have inventory gl accounts which are auto post accounts , these accounts get posted when grn is done. these accounts are not defined as line item display accounts, but if we execute the T code: FS10 we get the gl balance display and not line item display.
Our requirement is that we should be able to view the line item display matching the GL account balance in that GL account.
Can we get the report in MM module line items wise display.
Regards
Prashant P. Zinge

Hello,
You should use RFSEPA01 program via execute SE38 transaction.
This program activate line item for each account. Activation means, this program generate line items to BSIS table. So that after this program running, you can see line items in FBL3N.
Regards,
Burak

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds like there is an incoming call which does not show up in either call waiting or missed calls.

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds as if there is an incoming call but it does not show up in call waiting or in missed calls. When I went to check on line, the fix involved a screen that I did not even have on my phone. Anyone else have this problem and is there a solution? I can't seem to get tech support at Verizon. Boo.

Hi Debsy1,
Thanks for the additional details! Let's get this issue resolved. What software version is the device on? Please reset the Network Settings on the device. Go to settings>general>reset>reset network settings. Please Note: Audio alerts may also indicate delivery of incoming text messages or emails. The tone will vary based on the type of information being delivered to the device. Tones may also indicate low battery charge or inadequate signal strength. Keep me posted with results.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Can you close Material Codes/Groups which have not been used for a while?

Is it possible to close material codes/groups when they are no longer required? This would be similar to putting a date on Cost Centres in finance which then restrict the availability of use.

before putting deletion flag please be sure the stock in those material is ZERO
now rather than using MM06 use
WSE1
here you can block n put deletion flag for material
and to remove deletion flag use
WSE8

Release Code and Strategy

Hi,
We have created a new release code and its corresponding release strategy. But when we are trying to release the PO, the PO goes to a release code not maintained in the system. What could possibly be lacking in my config?
Scenario : I created release code T1 but the PO goes to release code F2 (which is not configured in the system). Please help.

Hi,
It happens some time , it is taking default values.
I will suggest you to delete all the release codes and release strategy maintained in the system.
After deleting pl Save it.
Now you create your release codes and maintain release strategy again.
Def now it will work.
Uts
Award if helpfull

HT201210 My iPad 2 will not restore. The error code is 24, which is not shown here. How do I fix this?

My iPad 2 will not restore. I keep getting error code 24, which is not shown in the troubleshooting section. I am trying to update it from iOS 4.3 to

well
when
http://support.apple.com/kb/TS3694#error23
20, 21, 23 and 26 28 are all about the same subject then it would be odd if 24 was something completly different

TS3694 My iPad 2 will not restore. The error code is 24, which is not shown here. How do I fix this?

My iPad 2 will not restore. I keep getting error code 24, which is not shown in the troubleshooting section. I am trying to update it from iOS 4.3 to 7

well
when
http://support.apple.com/kb/TS3694#error23
20, 21, 23 and 26 28 are all about the same subject then it would be odd if 24 was something completly different

Function Module to fetch Release Code for PReqs

Hi,
Is there any function module to get the current release code applicale by passing the requisition number?
Example : If we have 4 levels of approval, say A1,A2,A3 and A4, and I want to know with what release code shall I release the requisition.
If release has benn effected for the requisition with codes A1 and A2 and if I query with the function module what is the current release code applicable, then it should give A3 or atleast a result that A2 has been the last release code effected.
Also where is the release related info stored ? I mean which tables...
Not the release strategy related info but the release effected info.
Dont worry about points...

Hi
Pur requisition Release Codes are stored in T161E table
Release code is linked with Release strategy in T161F table
Link the code with Release strategy field in EBAN table
Also check the fun modules
MM_CHECK_RELEASE_CODE_EQUAL_KI
MM_CHECK_RELEASE_CODE_NOT_KI
ME_RELEASE_REQUISITION
BAPI_REQUISITION_RELEASE
Reward points if useful
Regards
Anji
Message was edited by:
Anji Reddy Vangala

Message FZ626 -Payment orders are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome !
TREAD LOCKED SINCE IT IS DUPLICATED FROM THREAD payment order are not defined for extended withholding tax

Hi,
On the analysis, the system expects an entry in the T059Q table with
code as XX.
The reason being in the extended withholding tax we use multiple
witholding tax codes and these entries are stored in the table
with_item. And in BSEG we populate the field withholding tax code i.e.
BSEG-QSSKZ with the value 'XX'. In classical withholding tax we used to
store the code directly which is not possible with Extended withholding
tax.
As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
the entry 'XX" needed in this table for the corresponding country of the
company code to maintain the correct relationship and consistent
database information.
Hence for the statistical purpose and for the internal calculations we
need an entry in the table T059Q. Could you please maintain this code
i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
This should resolve your issue.
Kind Regards,
Vanessa.

Releasing codes of a user for MM

Hi masters,
i have requirment on me29n..when a person creates a purchase orders he ( creater of the PO ) Should not release it.
i am implimenting one of the user exits and my concern here is
where do i find the releasing codes of this USER who is tryiing to RELEASE it?
in which table will i get the releasing codes or is their any FM?
hope am clear...
thank you,
pasala.

Hi Basker,
*EBELN ERNAM FRGGR
SELECT EBELN ERNAM FRGGR
          FROM EKKO "Purchasing Document Header
          INTO TABLE IT_EKKO
          WHERE "YOUR OWN CONDITION"
*FRGGR    FRGCO
SELECT FRGGR FRGCO
              FROM T16FW: "Assignment of Role to Release Code
              INTO TABLE IT_T16FW
              FOR ALL ENTRIES IN IT_EKKO
             WHERE FRGGR = IT_EKKO-FRGGR.
The value of FRGCO is the release code for that user.
Try it out, or
You can use the BAPI_PO_RELEASE
Thanks
Sri

PR Release tracking as per date of release code

Dear All,
We have 4 code release strategy for PR approval.
We wanted to understand the date & time on which concerned person has approved PR as per release code in the Release strategy.
How to find out the same.
Thanks in advance for your help.
Rgds,
SHIV

Dear ,
MY requirement is different ,
in me5a is not mention release code but i want to know base on release code but can't check single pr ,
I know there is no std report for my requirement but i want to know the table name for release pr
I try this table but i did't get
T16FV
T16FS
EBAN
is there any solution ?
Regards
Shiv

Need information about release codes

Hi,
I need information about release codes.In which Transcation we will get it.
Please give the information ASAP.
Regards,
Chow.

Hi Naidu,
Release code is a two-character identifier with which a person responsible for processing a document can release/ approve an item of a purchase requisition, a complete purchase requisition, or a complete external purchasing document, or cancel a release.
If a link to SAP Business Workflow has been defined for the release code, the person can refuse to effect release (withhold approval), thus rejecting the item or document.
You can find the relelase codes Using the following path :
Go to Transaction : SPRO and click on SAP Reference IMG and follow the menu :
-> Material Management ->Purchasing->Purchase Requisition->Release Procedure ->Procedure with classification -> Setup procedure with classification
Hope this helps..
Thank you
Srinivas

Incorrect Release code called which is not defined in a Release Strategy!

Similar Messages

Maybe you are looking for