Incorrect SIA code in DME file for Foreign payments in Italy

Hello All
I am trying to create a DME file payments in Italy.
The DME FIle is being created by program RFFOIT_FOR.
I am Getting an incorrect SIA code.
Can anyone tell me from wehere can I update this code
Thanks a LOt!!!

Hi
Thx for your prompt reply
I have already applied the note.
Now I want to populate the table
I need the list which contains countries and their UIC codes

Similar Messages

  • DME for Foreign payments in Italy

    Hello All SAP Gurus!!!
    I am using program RFFOIT_FOR for configuring DME for Foreign payments in Taly.
    But I am getting errors.
    I need to update the UIC code in the DME file.
    Please help.

    Hi
    Thx for your prompt reply
    I have already applied the note.
    Now I want to populate the table
    I need the list which contains countries and their UIC codes

  • DME File for credit card incoming payments?

    Hi Everyone,
    Someone can help me with this requirement.
    I am configuring the payment run for FICA transaction code FPY1 and I have done all the config for incoming payments with credit card, but the only that I cannot do is generate a DME file after the payment run to send it to the bank.  The funny thing is when I run a payment run with transfer this one generates a DME file without problems.
    If any of you know something about how to meet this requirement I would be very grateful for your help.
    Thanks in advance,
    Snk316

    Hello brittney22196,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article outlines steps for creating an iTunes Store account without a credit card:
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    http://support.apple.com/kb/HT2534
    Thanks,
    Matt M.

  • "Purpose of Payment" Tag in Outgoing DME File for India RTGS Payment

    Hi All
    While setting up DME tree for India , we need to populate field “Purpose of Payment” as per the norms laid down by the Reserve Bank of
    India (RBI). Please help on following points if anyone has experience of developing DME tree for RTGS payment method of country India.
    How the “purpose of payment codes” have been populated based on vendor invoice or any other FI data
    How DME tree configuration has been done for the XML Tag <CtgyPurp>
    Currently RBI has following codes :
    Thanks and Regards
    Nitin

    Hi Nitin,
    It looks like it's not related to TRM.
    Maybe you can ask the FI experts in the relative area.
    Thanks, Feng

  • Errors for foreign payments in the APP run

    HI all
    we have created new house bank for foreign payments for foreign vendors. The bank has been created for domestic payments and for foreign payment for the company code.
    The  domestic payment works fine and the international does not work. It can create payments and IDOCS in SAP but once it is received and  it is marked as a DOmestic payment instead of a International payment.
    we have tried to go through house bank config and I cannot find what we are missed out in the config.
    Can some one help me to find out what we have missed out in the config?
    Thnaks in advance
    Best Regards
    Venu

    Hi Venugopal,
    Please paste the log message here to find out what may be wrong with this issue..What is the error message.
    As a wild guess, Please check your settings in FBZP>Payment Methods in Company code> Check the section Foreign Payments/Foreign Currency payments, whether all are allowed or not for your Payment method of Foreign payment.
    Regards,
    SAPFICO

  • Kidno Transfer to Dmee Files for Norway

    Hi all,
    We're on ECC6 and want to generate DME output in XML format payment files.
    There is a DMEE template available - CGI_XML_CT
    Despite my best efforts I cannot seem to figure out how to get the KIDNO into the DMEE file - or the Notes to Payee.
    DMEE can use fields from the assorted structures like FPAYH, FPAYP & DMEE_PAYD but the KIDNO field does not appear in any of these structures.
    Tried mapping wiht FPAYP-STRFR but that too is not working unfortulately. can there be any other way to bring this field in ?
    Kindly help or share knowledge if someone has come accross this before or have done DME admin for Norway banks.
    Thanks
    Max

    Hi Mrugesh,
    If any source data field is not available in standard tables FPAYHX/FPAYP,FPAYH, then use DMEE exit code to get required one. And use custom exit as source type.
    Cheers,

  • DME file for RFFOUS_C

    hi,
    When the standard transaction F110 (rffous_c) is run for printing checks, does it create any DME file?
    Regrads,
    jaydip

    hi
    good
    F110 works in he following process.
    1. I have an ABAP program which is specifically designed for printing cheques or giros.
    2. In that program we create print cheque variants depending on which form we wish to print the cheque. You have to enter the variant name, beside the program name, on the "Printout/Data Medium" tab. Otherwise, your system will prompt you to do so when you click the "Printout" icon.
    3. Maintain the variant by clicking the "Maintain Variant" icon. Then check to see if housebank, acct id, cheque lot number and printer already match. Click "Print Immediately" if you wish to print the cheque, or unclick "Print Immediately" to print it later. Save your work.
    4. Click on the "Printout" icon, click "Start Immediately," and fill in the job name.
    5. The system will create spool request.
    6. If you choose to print the cheque later, you can preview your pre-printed cheque from SP02. You can also print, display, etc. from this t-code.
    thanks
    mrutyun^

  • Reasons for not creating a DME file in the payment program (F110)?

    Hi,
    I am using the payment program F110 for customer payments.
    A payment run was carried out:
    Parameters have been entered. Payment proposal has been created. Payment run has been carried out. Posting orders: 17 generated, 17 completed.
    However, the DME file was not created.
    What could be the reason?
    Thank you.
    Kind regards,
    Linda

    Solved. 
    Someone has changed the variant of the payment program.
    The DME file name had disappeared.

  • MT 100 DME file for multiple Transactions

    Hello
    We are not able to generate the <b>DME file in MT100 format for Multiple Transactions of the Bank Account after F110.</b>
    We are able to generate DME file in MT 100 format for a Single Transaction.
    Please suggest us if we had missed any configuration or any specific process is required to generate the DME file in MT100 for Multiple Transactions of the Bank Account after F110.
    Regards
    Srini

    Hi,
    I am just trying to give some additional information on this one. Here is a snippet from the PDF handbook.
    Option:
    SpoolBatches Enter Yes to tell the PDF Print Driver to print an entire batch of transaction to a single PDF file. The default is No.
    Please do keep in mind...
    • To create a linearized PDF file (for page-at-a-time downloading), you must set this option to No.
    • If you are using single step processing, you must set this option to No.
    In addition to this, you must also turn off the MultiFilePrint callback function. To do this, remove or comment out the CallbackFunc option. Here is an example of commenting out the CallbackFunc option:
    < Print >
    ; CallbackFunc = MultiFilePrint
    You cannot generate linearized PDF files if you set the SpoolBatches option to Yes because when linearizing, the PDF Print Driver must have the entire contents of the PDF
    file in memory. Since batches can be very large, it is not practical to keep an entire batch in memory.
    Important point for your reference:
    I just went through the FAQ in the below link and understood that there are some problems when you try to create a single PDF for a batch as a whole - Acrobat Reader only display the first transaction in a PDF file which contains multiple transactions.
    FAQ Book link -> http://download.oracle.com/docs/cd/E16256_01/faq_book.pdf
    PDF Handbook -> http://download.oracle.com/docs/cd/E16256_01/pdf_book.pdf
    I did not get a chance to explore much on this. Please explore if it helps. Thank you.

  • How to get source code and build files for Eudora 7, and price?

    Looking for source code and build/make files for Eudora 7 to port to Win7 and Ubuntu 14. Where is a source for this and what is the cost?

    You best ask qualcomm. It is their intellectual property.
    Eudora OSE was based on Thunderbird and the source code for the Penelope add-on is open source (that is what made Thunderbird over to OSE)

  • DME FILE for belgium

    Hi All,
    Right now we are using  format BE_PIBDTA for dme genration through APP but as per this format it is gerating file as flat file
    but my client requirement is that DME file should be .xml format
    Can any one suggest me how can i achieve this
    Thanks & Regards
    Phaneendra

    Hello Phaneendra,
    goto dmee and copy BE_PIBDTA i. e. to /ZBE_PIBDTA.
    You will find the parameter for creating an xml-filein DMEE-Tree: Properties Tab Administrative data.
    Create even a paymentmedium format /ZBE_PIBDTA (copy from BE_PIBDTA) and assign /ZBE_PIBDTA.
    You even can activate the parameter in Original structure BE_PIBDTA but this is in my opinion not recommendable, I prefer always a copy from existing entries without changing existing SAP-Standardsettings.
    Best regards
      Horst

  • BACS  File for Vendor Payments in Foreign Currency

    Hi,
    My client has Bank Accounts in UK both in GBP and USD currency. I am trying to generate a BACS file for payments made in currency other than GBP.
    The BACS file generation for GBP payments are in place and is working fine.
    But when I am trying to generate the BACS file for payments made there is a problem with the file format .The bank requires only payment lines in the file but the file I have generated contains some extra lines in the header and footer.
    Could you please let me know on how to generate a correct file with only the payment information.
    Thanks

    Hi,
    If the LC of the system is INR and the Vendor currency is INR too, then the Invoice can be added in INR and the payment will be made in INR only.
    If the Vendor is USD, then the Invoice can be added in USD as well the Payment. When you enter the Payment Means window, you can select the currency in the top field - currency.
    Regards,
    Jitin
    SAP Business One Forum Team

  • Payment File for each Payment method in Automatic payment run

    Hi Guru,
    For each payment method in automatic payment run, eg, ACH(Auto Clearing House), Bank Draft. etc. what kind of payment outbound file I need to take note to configure it, please advice me. Thanks.
    Regards,
    Kick

    Hi
    Please check the documentation in the link below. You will be able to get some help from them.
    http://help.sap.com/saphelp_47x200/helpdata/en/01/a9c24d455711d182b40000e829fbfe/frameset.htm
    Please let me know if it is useful. Also do award points if found useful.
    Karthik

  • Cross Company code posting is available for recurring payment setup?

    Hi All,
    I could not find the cross company code field for recurring payment setup with useing T code FBD1.
    Vendor is created in paying company code 1000, however, the rent has be booked to cross company code (1001) cost center (2000).
    So, while trying to do recurring payment setup, I could not see the field.
    I know the alternative option that i can use the "Cost Center(1000)" is assigned to CoCd 1000 and do recurring setup without useing cross company code, later i can post the manual journal for correction (as below), however, I do not want use this option.
    Dr/Cr       CoCd                         GL account            Cost Center           Amount
    Dr            1001                         Rent account          2000                      XXXXX
    Cr            1000                         Rent account          1000                      XXXXX
    Please let me know your thoughts on this.
    Thanks,
    Srinivas

    Hi, ok17 is not for cross company,but for CO-FI real time integration.
    Ex. you maintained for "RKL     Actual activity allocation" Dr 123 Cr 567
    Then while posting activity allocation in CO you'll get posting like Dr 123 Cr 567   (with corresponding CO objects)

  • Company description in DTA file for automatic payment

    Hi all
    I have changed the description of my company in customizing (T001). When i generate the DTA file after the payment generation (F110), the company description is still the old name. Where i must change?
    thanks
    Davide

    Transaction FBZP; Pmnt method in company code; choose method; open "Form Data"; change "Drawer on the form".
    Is there something you don't understand ?

Maybe you are looking for