Incorrect time slices for 0UCCONTRACT (note 713358)

Hello everybody,
I have the same problem as mentioned in note 713358:
Time slices of contracts were closed in IS-U. NO new time slice wasopened to this end (with the end date December 31, 9999). After the data is loaded, a time slice of the contract with the end date December 31, 9999 remains in BW, and receives the attributes of the contract before it is completed.
I can't delete all the master data for the contracts, because they are already in use in another ODS objects.
Is it possible to delete only historical data (table QUCCONTRACT)?
I tried to do another initial upload (0UCCONTRACTH_ATTR) over the existing master data, but it didn't help, incorrect time slices remain the same.
Is is possible to fix historical data without deleting all the master data?
Any help would be greatly appreciated.

I wrote a direct update statement to QUCCONRACT that deleted all attributes and then I started a new upload.

Similar Messages

When setting the split-days to "every 15 minutes," the week and comparison views show incorrect time ranges for the day

When I change the "split-days" interval time, under Options > Settings, to
15, or every 15 minutes, the week and comparison views don't show the correct
time range for the day.
<P>
For example, if I click View to display the calendar and then click Week to get
a weekly view, the time range displayed is from 6:00 a.m.
to 4:00 p.m. If I click Comparison to get a
comparison view, the time range displayed is from 12 p.m.
to 6:45 p.m.
<P>
In this example, should both of these views show the same time range, from
9:00 a.m. to 4:00 p.m.?
No, the two views will not necessarily show the same time range. The time
range for the comparison view will start at the beginning prefs time only
if you have something scheduled (on any day of the week) starting at that
time. For example, on one of the days during your week of comparison, if you
create an event that starts at 9:00 a.m. and then open the comparison view, the
time range displayed will start with 9:00 a.m.
<P>
Additionally, view times will expand past the configured settings if events
span past the time range. That is, if you have an event that spans from
5:00 p.m. to 8:00 p.m., the event will be reflected in the view, even though
your time range may be set to go only to 6:00 p.m.

Umm yes.
The settings are stored in ''prefs.js'', so you could swap various copies of this file in and out.
However, the system will load ''prefs.js'', then, if present, ''user.js'' , so you can set up just your changes in ''user.js'' .
The sort of line you need to look for is like this:
<code>user_pref("mail.server.server14.check_time", 10);</code>
You'll need to do some research to identify which of your accounts is which.
Search for the account's email address:
<code>user_pref("mail.identity.id10.useremail", "xenos@example.com");</code>
Use the id number to locate the account number:
<code>user_pref("mail.account.account29.identities", "id10");</code>
Use the account number to find the server number:
<code>user_pref("mail.account.account29.server", "server14");</code>
Finally, you can then use the server number find the account's time setting:
<code>user_pref("mail.server.server14.check_time", 10);</code>
This last entry may not exist, if you have never changed the setting from the default 10 minutes.
Do be careful with your typing and copy/pasting; if the file fails the syntax parser it will silently fail.
And make sure Thunderbird is shut down when you do the swap. If it's open, it may overwrite changes, and in any case, it only reads the settings file when it starts up.

Response time performance for the NOT EXISTS condition

Hi all,
In the query below, there is the WHERE NOT EXISTS condition based on a view. And I want to know what is the better choice to take whether to include the DISTINCT keyword in the select script of the view or not , because the view contains duplicated rows :
select * from table_name table_alias where not exists( select 1 from the_view_name where join_condition);
Thank you very much indeed

Sometimes it is, sometimes it isn't, usually it's the same. The optimizer will tend to rewrite the query as a join anyway if it can.
For some notes on the options available to the optimizer for an EXISTS subquery:
http://jonathanlewis.wordpress.com/join-ordering-pt2
Most if not all of those are also possible for an IN subquery (couldn't find a link just now but I have to go to work).

Time-/Deadline for Lotus Notes Support?

Hi @ all
In our Company we are using Lotus Notes 6.55 and BlackBerry Devices.
Today, the Blackberry-Desktop Software supports synchronisation to Notes 6.5
It works very well!
The usability is great.
In next time we want to buy again BB-Devices (new ones).
Is there any Information about like a timeline for Support Lotus Notes 6.5?
btw.. i mean only support by Using BB-Desktop!
Other Manufacturer (eg. Nokia) stopped their support for USB-Sync (Nokia Suite) to Lotus Notes 6.x
Blackberry is one of the last or even the last Manufacturer with Support to Lotus Notes 6.x
Will Blackberry continue support synchronisation with Notes 6.x in next Models via BB-Desktop?
hope for information ;-)
Thanks Mathias

Latest downloadable Version: v7.0.0 B60
We are using this Version an it supports Lotus Notes 6.55
My Question was:
Are there any Informations about ..like a Roadplan, Deadline etc...
Often, Manufacturer publicate Informations like "we stop support for xy at....."
I can´t find anything... thats the reason, i ask here
What´s about Lotus Notes Syncronisation (6.5) in future Blackberry Desktop Software (USB-Sync!).?

Incorrect time zone for Mongolia

Hi I am using Nokia N95 and want to use a pc suite calendar sync. But on N95, Mongolia, Ulaanbaatar is on Time Zone +9, it needs to be on +8, which is correct. when I do sync with my pc all the calendar schedule brings one our difference because on windows Mongolia is in the time zone +8.
Please help me how to solve this problem

Don't think that is a user changeable setting. If it is a bug in the firmware then you should report it using the "Contact us" tab above to the right of this screen. Perhaps they will correct it for the next update and newer phones.
You could try updating your firmware if there is a newer version available for your phone. It may already have been corrected.

Incorrect time duration for songs

I just added a few mp3s to my iTunes (8.1.1) library, and while the songs are around 3-4 minutes long each, the time duration listed is more than 25 minutes for each of the songs. The songs play fine, and they stop at the proper point (3-4 minutes in), the length is just listed wrong... how can I fix this? It's messing with my total time count, and it's just rather annoying altogether. Thanks for any help!

Welcome to the forums
One thing you could do, is set the correct Stop time for the track (in Get Info), and the track will stop playing at the correct point.
If you want to make the total time correct also, then :
1. set the correct Stop time (above)
2. convert the MP3 (iTunes Preferences / Importing) to another format, or to MP3 again (you will lose a little quality I'm afraid)
The converted track will now have the correct Stop time AND length.

Cancellation of time slice in EG41 (device info record) for device

Hi,
How to cancel time slice for device in EG41 (deice info record)
Actually we have device which is technically installed. which has 2 time slice say 10.06.2009 to 16.06.2009 & 17.06.2009 to 31.12.9999. both different technical data. I want to cancel second time slice . how to do this???
I have already cancelled all meter reading corresponding in EL37.
Regards,
Chetan

solved by myself

S4 Chooses incorrect time zone when set to automatic

My S4, and my son's, are choosing the incorrect time zone when the phones are set to choose automatically.
The phones were working and my son noticed his was off earlier in the week and mine seems to have developed the same issue sometime last evening.
They are both choosing Central Time and should be choosing Mountain Time.
Location services are enabled on both (GPS & Verizon as well as Google Wi-Fi)
I've launched my phone in Safe Mode and the issue still occurs
On my son's we chose to set time zone manually which works, but it reset itself to automatic later and returned to being incorrect.
Thanks for any help.

On my phone I believe it was the day I posted here (April 14th) on his a couple days prior to that.
Both had 'fixed' themselves until his changed back a couple days ago
No new apps, latest update applied to both phones (after his was already showing incorrect time).
Also of note, 3 other S4's in the household that do not have the issue(...yet?)
As mine is currently working I don't suppose there's a need for me to run in safe mode, but I will pass the instructions on to him

Delete Time Slice

Hi Experts,
In EG41, we can can create a new time slice for changing the register configuration.
My requirement is to change the register configuration for a previous date than the new time slice. For this we need to edit /delete the newly created time slice.
Please let me know how to delete the new time slice which was created.
In other words, I want to remove the lastest time slice in EG41, how can I do that....??
Please do confirm in which table this time slice data is stored.
Regards
S Sinha

Hi,
There is no specific way to delete new time slice,one way is remove any changes which you have made in new time slice and make it identical to previous timeslice and save it.
The time slice data is maintained in Table EGERH and View V_EGER_H.
Function module which update the time slice is ISU_DB_V_EGER_UPDATE.
Hope this helps.

TS3276 Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones ar

Hi there I am having trouble with my outlook express this is the first time it has happened it keeps telling me can't connect to the SMTP server and every password I have tried is incorrect this is for 'iCloud' very frustrating as all our phones are ok

Well I am feeling a bit silly now because that was all I had to do. In the past Workgroup Manager had always opened right up to the list of my users, I never even thought to click on that but apparently that was all that was needed.
I still am not sure how the iChat Server preferences changed themselves on me, but it is not the first time I have had weird "settings" issues with our Snow Leopard Server.
Thanks!

DAX Calculation shows incorrect results when driven from Time Slicer

Hi,
We have defined a DAX quarter on quarter calculation
PREV Q % 13F:=divide([PREV Q ABS 13F],[Prior Quarter 13F])
Prior Quarter 13F:=CALCULATE(sum([TotalValue]), DATEADD(Time[Date], -1, QUARTER))
PREV Q ABS 13f:=CALCULATE(sum([TotalValue]))-[Prior Quarter 13F]
which works fine in Pivottables in Excel but when time selection is driven by a time slicer the calculation doesn't work anymore:
Is this a but or expected behaviour? Are there other ways to use a control that affects multiple other pivot tables like the time slicer?
Thanks for your help!
Martin

OK, there are some really interesting points here - i think the screenshot below best explains it:
Time Slicers use MDX subselects to propagate the selection to the pivot table:
SELECT .... FROM (SELECT Filter([Fact13FSample].[ReportDate].Levels(1).AllMembers, ([Fact13FSample].[ReportDate].CurrentMember.MemberValue>=CDate("2013-04-01") AND [Fact13FSample].[ReportDate].CurrentMember.MemberValue<CDate("2013-07-01")))
ON COLUMNS FROM ...
this works just fine for normal measures but seems to cause issues with time-intelligence function
it actually causes an issue with all calculations that use CALCULATE and thereby shift the context out of the subselect
it seems that you cannot get out of this context using DAX- at least i could not find a solution yet
not even this works:
All Quarter 13F:=CALCULATE([SumTV], ALL('Time'))
the result is always limited to the subselect :/
funny thing is that this only seems to happen with this specific subselects so i guess it is further related to MDX FILTER() or .MemberValue or CDATE()
the only option i could currently think of is to use regular slicers
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Ve

I cannot do a software update, I get as far as System Updates then when I choose it a message appears say "Check for update is not available at this time" but I have not had a system update for a good while now. I am on System version 6.16.211.XT912.Verizon,en,US

Which phone model?

Incorrect time slices for 0UCCONTRACT (note 713358)

Similar Messages

Maybe you are looking for