Incorrectly reported 5320XM CPU speed!

Hi all . I am enjoying my new 5320. One weird thing i notice is that almost all 3rd party system applications (xplore, activefile, nsysinfo........) report that the processor speed of the phone is 192MHz while the spec sheet says its 369MHz. Nevertheless these applications do report the correct processor speed(369MHz) for other phones like E51. Whats wrong with 5320?

the n5320xm was the lastest s60v3 phone,the older software isn't able to check it out .and when it staying in standby mode ,the speed will auto drop to half of it to save the power.
it's just my view.

Similar Messages

  • Nokia 5800XM upgrading v30.0.0.11 - CPU speed cha...

    Hey (again),
    I've noticed the formal 5800 cpu speed when i bught it was 369mhz (i have v21.0.025).
    But after V30 firmware was published, i've noticed Nokia and other people wrote 5800 has 434mhz.
    can someone explain it?
    1 - There are new phone with different CPU? (although they both ARM11)
    2 - or the V30 firmware had accelerate the CPU speed to be like N97 and the rest S60V5 models?
    i've checked it on my phone with PhoNetInfo.

    When the 5800 started shipping it was underclocked, many believe this was for stability reasons.  The 5800 was also the first phone to use the S60v5 operating system.
    The processor was restored to it's correct speed in the v20 update once the stability issues were solved.
    This is likely to be a one off event so it's unlikely that you will see such changes on other devices.
    Phonetinfo often reports speeds incorrectly and should not be relied upon.

  • Re: helix CPU speed stuck at low clock speed

    Admin edit - Reorganizing this thread slightly as we are actively investigating the symptoms being discussed here.  Several different low end clock speeds of 600-800mhz are being reported capped under a variety of circumstances - sometimes cold boot, sometimes after suspend / resume or dock / undock
    motku wrote:
    Same here (helix ci7), after suspend and wakeup when CPU slows down ist get stuck at 750MHz and dose not recover untill reboot. 
    Before the BIOS update I could unplug the AC adapter and work with full speed on battery.
    I have the exact same issue.  It is quite annoying.
    Solved!
    Go to Solution.

    Mark, theres more.
    I found a "pseudo  workaround" of this problem and hope this could lead to the real workaround.
    What helped - installing win7, lenovo power manager, change power plan to other and change back to previous)
    I tried to do some research and what i found:
    In normal Lenovo power manager wheres 2 options in power plan:
    System perfomance (Maximum turbo, Turbo, Balanced, Low) (lets call it PERF) and Optimise fan control to (Maximize perfomance, Balance all parameters) (lets call it FCNTL.
    In theory FCNTL must control only fans, like table of data cpu temperature/fan speed. But in reality it affects CPU speed.
    Only way to make PC always select speed from lowest to highest is to set PERF=Maximum turbo or Turbo, FCNTL=Maximize perfomance.
    Lets go through options how they really works in practice:
    PERF
    Maximum turbo and Turbo are equal, means highest speed for CPU with turbo boost. The level of turbo bust is always maximum, Turbo didnt mean "slow turbo boost".
    Low - cpu always at lowest speed 800mhz - thats ok.
    Balanced - this option works a little crazy. In some situations it means "maximum cpu till 63C", in some situations it means "lowest speed, temperature doesnt matter. Why is it working in different ways but in same settings i dont know.
    In theory Balance is something like "from lowest cpu speed till normal cpu speed, no turbo boost", but it doesnt work like that at all.
    FCNTL
    Maximize perfomance - in theory it must be "try to keep CPU on lowest temp when high load"
    In practice its like "Balanced in PERF" - logic is unknown.
    Balanced - the same, logic is unknown.
    Unknown really means, that when i, for example, setup  PERF=Maximum turbo or turbo and FCNTL to Balanced, sometimes it works in full speed and sometimes not.
    Maybe there is logic, but it tottaly unknown to users.
    The bad thing is that theres no way i can set mode "always run cpu from lowest speed till highest speed without turbo boost, 800-1800mhz".
    By the way, there is some error in Lenovo power manager - when i change options in power plan and click "apply", sometimes they a apply, and sometimes not. If not, i need to select other power plan, and then select the needed one back.
    Now about how this all can happend. I'm not shure that i'm right, but logically it is:
    In Lenovo power manager theres option called "Optimise fan control to". And, there is NO such option in real windows power plan, so, it can be only changed through Lenovo power manager. As i see, this option affects maximum cpu speed. So, lets say, if this option is "damaged" some way, theres no way it can be fixed in windows 8, because Lenovo power manager for windows 8 has too few options, and native windows power plan editor doesnt have this option at all. So, when i done "something" in Lenovo power manager for windows 8, it changed that setting and all ruined.
    Sorry for my bad english once more, hope you can understand what am i trying to say. Looks like we have 1) an error in power manager for win8 and 2) incorrect power option logic, or "specific" logic without a manual.
    The strange thing, that in BIOS we have this options too. But changes in BIOS doesnt affect this at all.
     P.S. by the way, when i got my helix, dock battery was having "wear level" = 1%. Now, after 6 days (battery info 5 cycles) it has "wear level" = 2%. Is it normal, or battery is bad?

  • Question CPU speed VS RAM speed

    I am tweaking my new worstation.
    I have an Asus p6t ws professional. I7 960
    24 G DDR3 tripple channel ram (Patriot Level 7 Viper II)
    I am new to overclocking and I up to now I don't know how to solve this propblem.
    If I overclock the CPU by putting the BCLK frenquency to 160, with default multiplier at 25, I clock 4.07
    But, when I check the speed of my RAM with CPU-Z, I get a clock of 490 (!!!) so time two 980 (not even the 533 x2 to 1066)
    If I put my bios to XMP mode I get my ram to 1600, but my cpu is about 3.4 (close to normal 3.2)
    How can I OC to 4.0 with 24 G RAM at 1600?
    The mother board manual say it acccept 1600 RAM but (OC) And THEY SAY THAT iNTEL SPECIFICATION, IN xmp mode, DDR3-1600 are supported for one DIMM per channel only (does that mean I cn only put 16 gig in channel A,B and C If I want 1600 OR 24G butr at a lower clock around 1066?
    IF I am stucked in making choices and can't have it all (CPU 4.0 and 24D RAM-1600), WICH IS THE MOST IMPORTANT: CPU SPEED OR RAM SPEED?
    I mostly edit P2 and wil be editing red and filmstock transfered.

    Using a Gigabyte MB and cooling with water my i7-950 is rock stable at 4.3 with 24GB of 1600 G Skill RAM running at 1624; I have CPU turbo disabled and RAM XMP enabled and running at 1.5 volts.
    Based on my clocks (BCLK 203, CPU 21, turbo off, QPI 36, MEM 8, and Uncore 16), I would suggest trying the following to reach 4.0 with your 1600 rated RAM:
    BCLK 190
    CPU 21
    turbo off
    QPI 36
    MEM 8
    Uncore 16
    If that is not stable for your Asus, Try lowering BCLK until go get something that is. These settings would put your RAM at 1520 which would certainly be close to their maximum potential.
    OC'ing can be time consuming; if this "formula" does not work for your system, then you really do need to go with the tried and true methodical approach.
    Regarding which is more important for PPro I would say CPU speed is much more significant than RAM speed based on runs that  making with Harm and Bill's ever so useful PPBM5 benchmark along my journey.
    On another note, Cristobal on this forum informed me about "INTELBURN TEST" (Google it), which was a more rigerous torture test for stability than the ones that most people use (memtest, 3DMark, wPrime, etc.).
    Good luck and do report back what works best for you in the end; it would be nice to report how your drives are set up too along with your PPBM5 results as well.
    Jim

  • Max cpu speed

    My son has a compaq with a msi 6090 v3.0. The online manual says that it will support 2600+ or higher processor. But the MSI website says it will support 2200+ or higher. Doesn't sound like a big deal, but when i clicked on the relevant link entitled 'cpu support' it it had a "no" next to any processor with a higher speed than 2200+. Does anyone have any idea what the max cpu speed is that can be supported by this particular motherboard?
    Thanks for any help.

    CPU support for 6390 both 2 version is reported by BIOS ver:
    BIOS Version:6390 ver1:   W6390VMS.150 (ver. 1.50)
                         6390 ver2:   W6390VMS.210 (ver. 2.10)
    latest version on BIOS for 6390 ver1 is Version  1.8
    latest version on BIOS for 6390 ver2 is Version  2.6(Update Description Support Duron Applebred FSB133 CPU)
    if you update with latest BIOS for your mobo you may support higher CPUs
    BIOS link here: http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=80&kind=1

  • 10.4.10 boosts CPU speed by 130mhz !?!

    Hi,
    After installing the Mac OS 10.4.10 update my iBook 1.2ghz now thinks it is... 1.33ghz!
    Am I the only one?
    In the many years of being a Mac user I have never had this happen before, and it 'appears' that know one else has reported it happening either.
    Not that I am complaining!
    But really, I have checked and double checked, and the fact remains that 'About This Mac' and System Profiler shows my CPU speed as 1.33ghz now - has the update over-clocked my machine?
    When I get a moment I will run a benchmark to see if that is the case, or whether the update is (more likely) just reporting the wrong speed...
    Let me know if you have experienced this
    braeng
      Mac OS X (10.4.10)  

    Ok, I've just run XBench, compared the results with other users iBooks, and the conclusion is...
    About This Mac is lying.
    I had, and still have, a measly 1.2ghz
    I feel like one of those kids who buy's a old 3-Series BMW and then sticks a M3 badge on it to look cool.
    Anyway, I would still like to know if anyone else has had this weirdness happen after the update.
    braeng
      Mac OS X (10.4.10)  

  • Help me i've got a problem with my cpu speed

    I have bought prince of persia 2 and after the installation i want launch it but it indicates me I haven't the minimal configuration for the cpu speed(it's indicated 800mhz)
    my config:
    k8n neo platinum
    amd 64 2800+ (fsb 200mhz and multiplier 9x in the bios 1.4)
    1gb ddr 400
    ati radeon 9800pro 128mb
    i look for and i find : cpu-z indicates 200mhz for the fsb and 4x for the multiplier
    the same thing when i launch corecenter
    please help me    

    ok you're right  i restore the correct frequency
    thank you thank you thank you
    but it's nevertheless strange my multiplier moved from 4x to 9x on account of cool and quiet

  • How to get statistics (or precise data) about cpu speed and RAM

    My problem is I want to determine the CPU speed of the computer is running the applet.
    I know there's no way to obtain in a simply (and standar) way this property, so I've thinked about generating statistic methods for do it (something like executing a loop a defined iterations)
    My doubt is what to put inside this loop, beacuse I would like to know just not CPU speed (or satistics about it), I need also free RAM statistics, so I've thinked there would be some specific java instructions to give a relationship of these data I need.
    My question is if someone has done (or has thinked about) this kind of classes before me, and can tell me what is the best way to make the same.
    Tanks

    http://www.javaworld.com/javaworld/javaqa/2002-11/01-qa-1108-cpu.html
    http://java.sun.com/products/jdk/1.2/docs/guide/jvmpi/jvmpi.html#hprof-cpu

  • T430 CPU speed question

    Hi,
    I recently bought a T430 advertised as having this cpu:
    Intel Core i7-3520M Processor (4M Cache, up to 3.60 GHz) 
    However in my control panel the i7 cpu shows up as 2.90 GHz. Can anyone please tell me if there is some option to increase the speed in the BIOS or similar? Many thanks.
    Michael.

    michaelmartin wrote:
    Intel Core i7-3520M Processor (4M Cache, up to 3.60 GHz) 
    However in my control panel the i7 cpu shows up as 2.90 GHz. Can anyone please tell me if there is some option to increase the speed in the BIOS or similar? Many thanks.
    Michael.
    The CPU can dynamically change speed in order to conserve power. If you have a CPU speed monitor you can see these transitions routinely. Here are some samples showing my T430s (i5-3320M up to 2.60GHz) taken about a minute apart: 
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • Program taking up all of CPU Speed

    Hello,
    I have been lucky not to have to use the forum, until now. I recently installed a program called Garage Sale. I decided not to use it and deleted it (drug it over to trash from the finder window). Well,(now at least a week later) I turned on my computer this morning and it was running really really slow. I was finally able to get into the activity monitor and was able to find the problem. A piece of Garage Sale was still running (Garagesalehelper) and it was taking up to 65 - 80% of my CPU Speed. How to do I get rid of this thing? Thanks for any and all help.
    Imac G5 Isight 512MB 180GB HD 10.4.9   Mac OS X (10.4.9)  

    Welcome to Apple Discussions, JoeCat24
    To stop the offending process immediately, you can highlight "Garagesalehelper" in the main Activity Monitor window and then click the red "Stop Process" button. However, this fix is only effective until you restart your Mac or the application.
    To get permanent relief, you must properly uninstall Garage Sale.. I do not use Garage Sale, so I cannot give you specific, step-by-step instructions. You will need to find the proper uninstall instructions. Some applications come with an uninstaller. Others list all the files that must be removed along with their locations
    If you still have the Garage Sale installer or Readme files, check there to see how to properly uninstall. If you do not have this information, you may need to download the installer again to see if uninstall instructions are available there. Sometimes it is simpler to reinstall the application and then use the Help files to find out how to properly uninstall.
    If none of those things work, I suggest that you contact the software developer and ask him for instructions on how to uninstall his app.
    If this GarageSale is the app causing your problems, the developer offers email support via his "Contact & Support" link.
    Jim

  • ERROR: AU incorrectly reports Dynamic Configuration capability (bus count i

    Hi'
    I can't seem to access my East/West Colossus samples in logic. I call up a new session, slecet software instruments, go to where Audio Units instruments are on your channel strip. Colossus does not show up. It worked before.
    I wanted to go back to using tiger it seemed to work better so I tried to installed that but had problems doing so. I then installed 10.5 back to the way I had it before when all was fine. So I install 10.5 again went well. In stalled Logic/pro went well. Installed East/west colossus.
    Audio Unit Mangers states Successful valuation everything passes But This Error message.
    ERROR: AU incorrectly reports Dynamic Configuration capability (bus count is not writable)
    Does anyone have an idea whats going on
    Thanks
    JodyG

    Hi'
    I can't seem to access my East/West Colossus samples in logic. I call up a new session, slecet software instruments, go to where Audio Units instruments are on your channel strip. Colossus does not show up. It worked before.
    I wanted to go back to using tiger it seemed to work better so I tried to installed that but had problems doing so. I then installed 10.5 back to the way I had it before when all was fine. So I install 10.5 again went well. In stalled Logic/pro went well. Installed East/west colossus.
    Audio Unit Mangers states Successful valuation everything passes But This Error message.
    ERROR: AU incorrectly reports Dynamic Configuration capability (bus count is not writable)
    Does anyone have an idea whats going on
    Thanks
    JodyG

  • Firefox wants newer Flash player but my machine doesn't meet Flash 10.2 CPU speed

    Just installed Firefox 3.6 and it says I need to update Flash player plug-in, but my machine doesn't meet the current Flash player 10.2 system requirements, ie for CPU speed. My CPU is 1.7 GHz. New Flash wants something like 2.4 GHz. I have 128 MB of dedicated graphics.
    IE does display flash content, using Flash active X plug-in, 10.0.32.18
    Otherwise like Firefox.

    Update to the latest version of Flash that is compatible with your system. (probably 10.1 r102) After that ignore Mozilla's messages about needing to update Flash.
    IE uses a different version of Flash (ActiveX) than other browsers use (Plugin), so it's like comparing apples and oranges.

  • HOw do I find out Ram, JVM version, CPU speed in Solaris 8?

    I need to find the following in Solaris 8:
    RAM                    
    Java Virtual Machine version
    Sun Version               
    CPU speed
    How many CPU's
    Available disk space          
    What are the commands to find this information out?
    Thanks!

    RAM --> % /usr/sbin/prtconf | fgrep -i 'memory size'
    Java version --> % java -version
    Sun version --> % uname -a
    CPU speed --> % /usr/sbin/psrinfo -v
    How many CPUs --> % /usr/sbin/psrinfo | wc -l
    Available disk --> % df -k
    You may also want to look at the man pages for each
    command I've given.

  • How to boost nokia e63 cpu speed

    hello, please i am wondering if it is possible to boost the cpu speed of nokia e63, become its usually slow when performing various task like 1. When installing an application 2. When opening some big third party applications like opera mini, whats app, and some games 3. When removing an application, these are the areas where i,ve noticed nokia e63 being slow
    Solved!
    Go to Solution.

    Try closing apps which is running in the background. Clear browser cache and uninstall 3rd party applications which you don't use. Turn off theme effects. All this could affect the "speed" on your phone in a positive way.

  • Minimum usable CPU speed for Photoshop Elements

    It has a CPU described as:  A4-5000 APU with Radeon (tm) HD Graphics 1.5 GHz.
    Windows 8.1 operating system.
    Will I be able to use Photoshop Elements on this?

    I know about the min specs. The reason I'm asking if it really checks the CPU speed is I have a school that *is* running Premiere Elements 10 on the exact same hardware. Same CPU. The only difference is the new version I'm trying to install is the volume license version, part of the Adobe Digital School collection. The school that already has it running is using Premiere Elements 10 with either separate licenses or some other license setup. So it doesn't make sense why it worked but doesn't now.
    Testing today. On my test PC, a Core 2 6300 XPsp3, the setup would start up OK using the non-VL installer, but fail when I tried to use the setup.exe from the new installer. As far as I know the program is the same, but I don't think I can do the XML customizations needed to do a silent installer on the non volume licensed version of Premiere Elements 10. In short, why does one version of PE 10 install but not the other?
    Sir_Timbit

Maybe you are looking for

  • Qucktime Pro for Windows lacks same features as Mac Version!?

    I am very dissatified to learn (after purchasing) that QT Pro for windows does NOT have a Video Capture Feature. The reps at Apple tech support all told me the program was exactly the same as the Mac version. So I purchased it only to discover no Vid

  • Final Cut to iChat???

    Yesterday, quite by accident, I discovered something. My DV deck was connected to the G5 via firewire as I had been capturing. I plugged in my iSight to chat with someone and discovered that it was, instead, looking at the DV deck. I played "live" vi

  • Patch 2930368

    After installing portal patch 2930368 I had numerous invalid objects in my portal schema in my infrastructure database. I attempted to compile these invalid objects with the utlrp.sql script and they would not compile. Now numerous portions of my por

  • KP06 Cost Center Planning - Error Message

    I tried to enter a budget into SAP. So far, so good. But when using this Cost Center I get the following error message: "Enter rate NZD / AUD rate type P for 01.04.2008 in the system settings" How can I correct this? Markus

  • Failure on loading pages with Yosemite-upgrade

    After tree upgrades/corrections on Yosemite, my mac still can't upload 100% on some sites.Last correction was done this morning.  Is this a problem for other users, or is it only me?