Increment and decrement buttons on a ring control are greyed out

Hello,
  The check box for showing the increment and decrement buttons on a ring control are greyed out. Does anyone know why? I have verified that the ring is a control as opposed to a indicator.
Regards,
Kaspar
Regards,
Kaspar

"the controls are greyed out because they do not exist on the Menu ring control."
Errr... yes, I believe that's exactly what I said in my last response.
"This is different from what I saw in another part of this forum about using event structures on a Menu ring."
Don't know what you could be referring to, as there is no event specific to the increment/decrement controls. All that they would do (if they existed) is to change the value of the control, and the applicable event would be the "Value changed" event. Where exactly did you read this?

Similar Messages

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • With Traditional NI-DAQ Compatibility VI's the acquisition locks when I press the increment or decrement button of a numeric control.

    Hello all.
    I´m using a PCI-6220 and the Traditional NI-DAQ Compatibility VI's to make the acquisition that is in the attached VI. But when I click the increment/decrement button on the numeric controls my acquisition stops. In the same PC I made the same experience with a 6040 and I could not see this problem. I tried with the PCI-6220 with the DaqMX VI's and I could not see this problem too, for these reasons I believe that the problem has something to do with the Traditional NI-DAQ Compatibility VI's.
    I built machines that can have one or the other board (depending if it is low-end or normal). Does somebody knows the solution for this problem?
    Thanks in advance.
    Paulo Carmo
    Attachments:
    experiencia.vi ‏49 KB

    Hello
    For what I’ve seen on National web site, using the “Traditional compatibility VI’s”, it sould be possible to control a NI-DAQmx using code written in NI-DAQ Traditional. This information was obtained from the following NI link:
    http://digital.ni.com/softlib.nsf/954feaeea92d90918625674b00658b83/9d67f671bcc6850586256e630059308b?...
    Please read this information and then tell me something please.
    Best regards!

  • The acquisition locks when I press the increment or decrement button of a numeric control

    Hello all.
    I´m using a PCI-6220 and the Traditional NI-DAQ Compatibility VI's to make the acquisition that is in the attached VI. But when I click the increment/decrement button on the numeric controls my acquisition stops. In the same PC I made the same experience with a 6040 and I could not see this problem. I tried with the PCI-6220 with the DaqMX VI's and I could not see this problem too, for these reasons I believe that the problem has something to do with the Traditional NI-DAQ Compatibility VI's.
    I built machines that can have one or the other board (depending if it is low-end or normal). Does somebody knows the solution for this problem?
    Thanks in advance.
    Paulo Carmo
    Attachments:
    experiencia.vi ‏49 KB

    Hello
    For what I’ve seen on National web site, using the “Traditional compatibility VI’s”, it sould be possible to control a NI-DAQmx using code written in NI-DAQ Traditional. This information was obtained from the following NI link:
    http://digital.ni.com/softlib.nsf/954feaeea92d90918625674b00658b83/9d67f671bcc6850586256e630059308b?...
    Please read this information and then tell me something please.
    Best regards!

  • Since updating to Yosemite and CS6 2 of my print options are greyed out on my epson R2880 print pane?

    My colour and colour settings options are 'greyed out' on my  Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??

    That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
    Can you show screen shot(s) of your incomplete print dialog?

  • My volume controls are greyed out and have a circle with a line in it when I try to change it.  Can I fix this myself?

    Found a solution.  Thanks.

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • I am trying to remove two full page black borders from my Pages document and when I click on them they are greyed out

    I am trying to remove 2 full page size black borders in my pages document and whn i click on them they show greyed x's but i cannot manipulate or remove them.   What to do?

    John,
    While the grayed x corners are showing, Arrange > Unlock.
    Now you will be able to manipulate or delete the borders.
    Jerry

  • Rating and labelling images is not working in Photoshop Bridge CS6. The Rating and Label headings in the Label menu are greyed out. Any ideas for correcting this would be appreciated.

    Any suggestions for restoring the Rating and Label options in Photoshop Bridge CS6 would be appreciated.

    Please post Bridge related queries over at
    http://forums.adobe.com/community/bridge
    Maybe it’s permissions issue … what volume are the files on?

  • Help! The App Store was telling me to update my apps so I did an 'update all'. Half way through they stopped and now I have some apps that are greyed out and I cants open them or delete them. What do I do?

    Any advice would be appreciated.

    Hey Pagevc86,
    Thanks for the question. It sounds like you might have some apps that seem to be stuck on "Waiting." The following is a past discussion that dealt with a similar issue and may help you as well:
    App updates won't download on my...: Apple Support Communities
    https://discussions.apple.com/thread/4111336
    Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
    Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
    If that doesn't do it, try resetting or restoring the iPhone.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • When using mail icon i get a blank screen with No message selected on the RH side. Top left is the word thread in  black . all other buttons are greyed out except the send new mail one. Cna anyone help?

    Email does not appear when using the mail icon on the home screen. I get No message selected showing on the rh side of my screen with the left hand third of the screen blank. Buttons on the top line are greyed out except the new mail one. The word thread appears in black on the top left hand side of the screen The only way out is to close the screen. all other apps work okay.

    Hello calverone,
    Thanks for using Apple Support Communities.
    To start troubleshooting this issue where the Mail application is not appearing correctly on your iPad, I'd like you to please force the Mail app to quit, and then restart your iPad.
    iOS: Force an app to close
    Turn your iOS device off and on (restart) and reset
    Have a great weekend,
    Alex H.

  • Is Increment and Decrement Operators Atomic?

    Is there a need to synchronize increment and decrement operations, or they are atomic? If so, how about pre and post variations?

    raychen wrote:
    jverd wrote:
    Simple rule: If multiple threads are accessing a variable, all access to that variable must be synchronized. There are exceptions, but you'll seldom go wrong by following that rule.I don't synchronize data member accesses in simple setters and getters, as JVM guarantees my read and write are atomic at the memory level. Am I making bad assumptions?Yup, you are. For a couple of reasons.
    1. Reading and writing of non-volatile longs and doubles is not guaranteed atomic.
    2. It also does NOT guarantee that one thread will ever even see a value written by another thread, however, unless either a) the variable is volatile, in which case threads don't have local copies all reads and writes go against the main copy, or b) access is synchronized and therefore the writing thread's local copy is flushed to main memory upon exiting exiting the sync block and the reading thread gets its first read after entering the sync block from the main copy.
    Edited by: jverd on Jul 21, 2009 10:33 AM

  • The back, forward, reload and stop buttons are greyed out, the address bar stays blank when I go to a website and firefox loads to a blank page, not my home page. There are 3 users on this computer and it only happens on one user.

    Firefox loads to a blank page, not my home page. When I click on the home button it takes me to the home page. The back, forward, refresh and stop buttons are greyed out and not usable. The webpage I am on does not show up in the address bar. If I type something into the address bar, that address stays there no matter what page I go to next.

    Just upgraded to v4. It did NOT fix the problem.

  • The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi.  How can I fix this problem?

    The wi-Fi button on my IPhone 4S is greyed out and will not turn on and therefore I am not able to receive wi-fi.  How can I fix this problem?

    Follow the steps in the article below to try and resolve the issue:
    iOS: Wi-Fi settings grayed out or dim
    If after all the steps the issue remains I'd suggest to book an appointment at an Apple Retail Store to have your iPhone evaluated or contact AppleCare for assistance.
    Hope this helps

  • Toolbar buttons do not work and are greyed out not allowing me to log in or log out

    I have increasingly been frustrated with firefox not allowing me to log in and or log out of important websites in which i pay my bills online This happens because the toolbar buttons are greyed out. It makes this feature non functional, therefore I have to resort to closing the website page without logging out. Can you tell me how to fix this problem? When i click on the buttons there is no response; its as if they were drawn.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • In iphoto 11 the copy and past buttons to the adjustment tab are gone

    In iphoto 11 the copy and past buttons to the adjustment tab are gone. I thought this was a cool feature. They still work when you click alt-c or alt-v. Did anyone notice this?

    I've noticed too and I don't like it! I tried to alt-c like you said and when I do that, it just takes me to the crop. It won't allow me to copy the adjustments! Is there any way around this??

Maybe you are looking for

  • Open file in maximize state by client_host

    I use form 10.1.2.3, jre 1.6.0_10 I open file with the extension 'spf ' by client_host. How can I open the spf file in maximize state ? thanks

  • Query runs fine in 9i but results to ORA-01652 unable to extend temp in 10g

    Hi, We are having issues in running a SQL query in 10g. In 9i, it runs fine with no problems but when run in 10g, It takes forever and the temp tablespace grows very large upto 60GB until we get ORA-01652 error due to lack of disk space. This does no

  • Dell Servers with Nexus 7000 + Nexus 2000 extenders

    << Original post by smunzani. Answered by Robert. Moving from Document section to Discussions>> Team, I would like to use some of the existing Dell Servers for new network design of Nexus 7000 + Nexus 2000 extenders. What are my options for FEC to th

  • Long single beep noise on startup.

    When I started up my MacBook Pro after a software update (EFI and Thunderbolt software), it made a long single beep noise, then showed the Apple logo with a progress bar below it, then flashed the screen, and went to the regular startup with the Appl

  • Need ALOT of help for itunes?

    Ok,well i just got a new computer and i had backed up all my songs from my old computer to a cd. My old computer was an Emachine. When i tried to back up the songs to my computer it would not work,so I used my ipod to put my songs into itunes.After a