Indbound Interface not visible in Receiver business service

Hello Experts-
II have created a business service.
After creating the business service, when try to enter receiver inbound interfaces.
The message interface which I declared in IR is not visible .
I am not able to select it as its not visible.
When I manually input the name system display object doesnt exist. But, In IR I can see its there. Do I have to do any kind of import?
I am doing a Flat file to RFC scenario.
Thanks,
raj.

Yes. Below is little more detail descripition on what i did.
In IR design , this is what I have
MI_filetype (outbound asynchronous) and I have assigned its message type  (mt_filetype) to it.
In message mapping I have mapped
mt_filetype to RFC message (ZFILEtype)
mapped the source interface MI_filetype to Target interface ZFILETYPE.
I have sucessfully tested interface mapping. .
Activated the change list.
In IR configuration,
I have created a scenario and then Busniess service for sender. and create dit communication channel.
In next step business service for receiver, I am assuming the receiver inbound interface would be MI_filetype?
Is that not right?
Thanks,
Raj

Similar Messages

  • Interface mapping is not visible in receiver determination

    Hi,
    I could not see interface mapping in my receiver determination in ID.
    I can see the message interface and receiver agreement in receiver determination
    my scenario is idoc to soap (SAP R3 to webservice)
    Thanks
    Ruban

    hi,
    could you plz check as Sheshagiri and Phani have said.
    Also wanted to know,are u using the configuration wizard for creating ur business scenario and not finding ur interface mapping?
    if so is the case then try creating manually ur reciever determination and add ur interface mapping(if u have already done as said by phani and seshagiri)  by inserting it.
    let us know how it went.
    thanks,
    ahmed

  • Interface not visible

    I am unable to see my interface under a business service in the recievr determaintion step. Please help.

    Hi,
    I dont think you have to worry about the SLD configuration as they will be taken care of by the Basis guys. You as a developer dont have to worry about it.
    All you have to do is, once you create a BS.
    i.e. once you give the name of the BS and click on the create button, you will move to a window "Edit Service"
    You can see tabs for reciever and sender. Click on the required tab and add your interface.
    (If its reciever BS, add inbound interface
    and if its sender BS, add outbound interface.)
    if you do this much, i'm sure your interface will be reflected in your reciever determination.
    hope i am a bit more clear here.
    reward if helpful

  • Images not displayed in Developing Business Services tutorial

    Hi Oracle Team,
    Images in the Developing Business Services with ADF Business Components tutorial @http://www.oracle.com/technetwork/testcontent/developbusinessservices-097552.html is not getting displayed.
    CAn anyone from Oracle team fix this please.
    Regards,
    Vikram

    Vikram is right!
    Neither IE nor Mozilla work.
    It is 3 days since vikram reported the defect.
    Won't anybody fix the code of the page?
    Is oracle committed to offer support, training and reliable resources to developers who use their products, or not?
    NA
    http://nickaiva.blogspot

  • Message Interface not found during Receiver determination

    Hi Folks,
    While doing Receiver determination i found this error
    “Problem Loading Schema Description: Message interface does not exist in any software components installed on this business system”
    i checked it in SLD also for Product assigned to Particular Business System. Even i tried with creating a new one and assigning the product and software component to it.
    When i imported the Business system from SLD, i m not able to see any inbound and outbound interface for particular business system.
    But it is working for another scenario where inbound interfaces are used.
    plz help me out
    Sachin

    Sachin,
    ><i>DEV and QA is having diff. SLD so i created the SWC and products in SLD again.</i>
    You should export the SWCV from your Old SLD and import in into your new SLD.
    and then import the same in Integration Respository.
    When you try to export SWCV from SLD, you will get a .CIM file which you need to save in your local desktop and then import this in the new environment.
    More in this article,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    Regards
    Bhavesh

  • Note type not visible in Creation of Service Request

    Hi there!
    I am experiencing this OAF issue:
    When creating a new Service Request there is a section "Problem Description" where we can see DFF, Summary and Notes.
    The Notes region I can see is extended from another Region where there is the Notes Type and the actual Note to be entered (TextInput). But when creating a new Service Request I cannot see the Note Type messageChoice and don't know why. If I open the personalization page by clicking on "Personalise Page" link Ican see the Note Type item and it's visible according to the information but I still cannot see it. Is there any setup here that is used in the controller to hide the item? Is there something else happenning? Please, help.
    //Patricia

    Hi!
    I discover that both Note Type and status are set to rendered=false in the controller. That's the answer. I have to check I customer needs to see those or if they can live with it as is. Question is why arethey invisible in Service Request entry?
    //Patricia

  • Receiver agreement not visible in receiver determination( ID)

    Hi,
    I could not see receiver agreement in receiver determination in ID.
    Even i could see my receiver agreement in ID.
    Give some inputs to solve this issue.
    Thanks & regards,
    Ruban

    Hi,
    I did as u said..even though i could not see receiver agreement in receiver determination.
    One more issue is in interface determination, if i select type of interface determination as Enhanced i could able to select name and Name space in inbound interface and interface mapping.
    If i select type of interface determination as standard i could not see name , name space for inbound interface and interface mapping.
    Thanks
    Ruban

  • AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

    Hi,
    We wish to connect to our customer using AS2 adapter as the receiver communication channel.
    We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
    Our XI version is as following (NW04S_11_REL Service Pack 11).
    Version
    Service pack:
    11
    Release:
    NW04S_11_REL
    Is there add-on to be installed on XI or is there any activation required?
    Thanks in Advance,
    Rehan

    SAP_BASIS
    Release 700
    Level 0011
    Highest Support Package: SAPKB70011

  • Interfaces not visible in 'Operator' when executed with 'Remote Agent'

    Hi,
    I am new to ODI, and have an issue with running Interfaces/Packages with a Remote Agent.+
    I have setup an agent on the machine on which the Database is installed. I have created a Physical Agent with the details, and on using the 'Test' button in the client, it works fine.
    However, when i try an execute a package with this agent, i get the 'Session Started' pop up, but the interface does not register in the 'Operator' section, and nothing happens.+
    However, this does not happen when i use the 'Local (No Agent)', and the interface runs successfully and is registered in the 'Operator'.+
    I just get this error under the 'Physical Agents' tree in the 'Operator' section for the interface - "ODI-1266: Agent agent_apo13110026 detected Session as stale session and set to error status"
    Would appreciate any inputs.
    Thanks,
    Ab

    Hi,
    Thank you for your response.
    We have actuall just migrated the from DEV to TEST. But in DEV we were only using the local agent, and we have configured the new standalone agent only in TEST.
    The way the migration was done, was that we exported the Master and Work Rep from DEV, and then imported it into TEST.
    Could this have had any impact, and would appreciate any pointers on how i can check if indeed the Agent is interacting with the wrong repository.
    Thanks,
    Ab

  • Pics are not visible in received mail

    This has been happening a lot. Someone will send me an email with a picture or multiple pictures in it, and instead of the pictures I get little blue boxes with question marks in them. When I right click on the box, there is a single option "download image" but it doesn't seem to do anything. Nothing shows up anywhere.

    I had lots of gremlins with mail dissapearing after installing tiger but have resolved them. Now the slideshow feature has gone, it was there when I first opened mail under tiger but it has since vanished. The earlier reference to button on top right corner is a puzzle, as, when I click on mine all that happens is the munu bar shrinks. The photos are shown on my emails but the slideshow has just vanished, just as I was finding this useful. Any ideas

  • Message not visible but received

    I would like to send a print screen to show what happen but i don't find how to join the picture in tis message.

    Error is as follow
    Horodatage : 08/05/2014 19:07:42
    Avertissement : Couleur attendue, mais « top » trouvé. Erreur d'analyse de la valeur pour « background-image ». Déclaration abandonnée.
    Fichier Source : https://mail.google.com/mail/u/0/
    Ligne : 1, Colonne : 472125

  • Interface Mappings are not   displayed in Receiver Determination

    Hi  friends,
       I'm doing Enhanced Receiver determination..   but in this  if i select  <b>Extended</b>  radio button in the receiver determination .. I'm not gettting  any  search help for  selecting my  Interface mappings..
    what misteqe  i did.. for getting those interface mappings  does we need to do..any special things   .
    i followed the bellow blog.. but like that  i'm not getting...  and how many interface mappings do we need to create for this..
    /people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
    plz suggest me..
    thanks
    BABU

    Hi  Prabhu..
       Thank you   for ur spontenious respnose ..I Mentioned the  receiver  business services in the  user defined function  which i creted in the message mappings ..  is there any other place also do we nned to mention..
    actuvally  , i have one source struturce that   and Two Receiver strutures..
    <b>1) Sendor_DT</b>
       PERSON
            NAME
            AGE
           ADRESS
    <b>2) Receiver_DT_1  ( this is for Male person details )</b>
       PERSON
            NAME
            AGE
           ADRESS
    <b>3) Receiver_DT_2 (this is for  Female Person Details</b> )
       PERSON
            NAME
            AGE
           ADRESS
    for this.. i created  Three message mappings.. ( one for soource to first recevier )
    and   next for ( source to  second  receiver)
    and for third for  source to  RECEIVERS   ( MESSAGE TYPE FROM SAP -BASIS  component )
    in the mapping
    i created one user defined function  and i map that to  split message..
    in that  user defined function i wrote  the bellow  coding
    int i;
    int mr=0;
    int ms=0;
    for(i=0; i<a.length;i++)
           if( a<i>.substring(0,2).equals("Mr") && mr==0)
                 result.addValue("AATRNG_TEST_4_BS_IB1");
                 mr=1;
          if( a<i>.substring(0,2).equals("Ms") && ms==0)
                 result.addValue("AATRNG_TEST_4_BS_IB2");
                 ms=1;
    </textarea>
    and i created two  interface mappings .. and i  created  three business services.. three communication channels. and two recever aggriments.. and two  interface determinations .. and  one sendor aggriment   and <b>receiver determination</b> with <b>EXTENDED</b> . and  i used those interface mappings  in   recever detrmination ....
    but  why file was not loaded into receiver side..
    thanks
    Babu

  • BUSINESS SERVICE is not getting invoked

    Hi all,
    I am trying to do OSP application in which I have a proxy service and I should call the business service. That business service is generated by DB Adapter jca file. It does not accept any
    input but gives output if we invoke it. In my Proxy Service I have taken a Route and just routed to that business service. I have created a wsdl for my proxy in which I didnt give any
    request node for the input. When I try to run the proxy service it is unable to call the business service. I am just getting the request echoed back. What could be the problem?
    Kindly help me on this.
    Thanks

    Hi eric,
    I dont have any input for this service so I didnt declare any in the soap body. My wsdl is something similar to the below one. In the soapAction I am just giving some uri it is not related to my business service or proxy. what needs to be given in the soapAction. Kindly find out where I am going wrong. Please dont mind for bothering you.
    WSDL
    <wsdl:definitions>
         <wsdl:types>
              <xsd:schema elementFormDefault="unqualified">
                   <import........ />
              </xsd:schema>
    </types>
              <wsdl:message name="TestReq" /> -----------------------> I am using it for the sake of my input. I dont have any input to my message. so this is blank
              <wsdl:portType name="TestPortType">
                   <wsdl:operation name="TestReq">
                        <wsdl:input message="tns:TestReq" />
                        <wsdl:output message="tns:TestRes" />
                   </wsdl:operation>
              </wsdl:portType>
              <wsdl:binding name="TestReqSOAPBinding" type="tns:TestReq">
                   <soap:binding style="document"
                        transport="http://schemas.xmlsoap.org/soap/http" />
                   <wsdl:operation name="TestReq">
                        <soap:operation soapAction="testtesttesttest:test/" /> -----------------------> I dont know exactly what needs to be given here.
                        <wsdl:input>
                             <soap:header use="literal" part="dssds" message="tns:sds" />
                             <soap:body use="literal" />
                        </wsdl:input>
                        <wsdl:output>
                             <soap:body use="literal" parts="parameters" />
                        </wsdl:output>
                   </wsdl:operation>
              </wsdl:binding>
              <wsdl:service name="TestReq">
                   <wsdl:port binding="tns:TestReqSOAPBinding" name="TestReqSOAP">
                        <soap:address location="http://www.example.org/" />
                   </wsdl:port>
              </wsdl:service>
    Thanks

  • Parties, Business Systems and Business Services

    Hi guys,
    I've read a lot about items in subject, but have some doubts about applying them to my scenario. I have to integrate SAP system and web service.
    As far as I understand concepts, this is B2B communication, so I have to use parties. To represent SAP system I use Business System, as it's described ins SLD,  and for Web service I use Business Service... just as we use business services for web services
    --- Am I right here? Will it work ok in reciever determination, agreement?
    Thank you.

    Hi,
    You are doing the usage of business systems and services in proper way.
    The scenario will difinately work with combination of business system and service.
    It will be fine for all other configurations such as Receiver Determination, Sender/receiver agreements and interface determination etc.
    Please see below the importance of Parties, Business Systems and Business Services 
    A communication party
    A communication party (party for short) represents a larger unit, which is involved in a collaborative process. Using a communication party, you generally address a company within a cross-company process. 
    You can assign a communication party one or more services to address it as the sender or receiver of messages.
    A business system
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    A business service
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
    Thanks
    Swarup

  • What is the difference between Business System and Business Service?

    Hi
    Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
    Best Regards
    Ravi Shankar B

    HI,
    Business system:
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    Business Service:
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
    Regards,
    Sudheer.

Maybe you are looking for

  • N95 crashes in Data transfer via USB cable, help?

    I ve been using my N95 with no problems for more than a year. Sometime ago I bought a new 8Gb Micro SDHC memory card, it was recognised by the phone and worked perfectly. But after the card was stored with data for more than 1gb, the phone crashes ev

  • ITunes won't let me download music off the cloud

    My hard drive corrupted earlier this year but thanks to iTunes match I can download all my music back off the cloud onto my laptop. I've been downloading as much as  my bandwidth allocates me each month, so when it came to the start of this month, I

  • HTC ONE M7 Random Headphone Controls

    Developed an issue recently when having headphones connected to it with controls that it would randomly end calls, bring up search, pause videos etc. This is the same occurence with three DIFFERENT headphones. What could be the issue? These occurrenc

  • Third party remittance_Check generation

    Hi Guys, I successfully ran TPR for taxes and deductions remittance. I went into FB03 and FBL1N and i could see the amounts for those vendors. But when i go to RFFOUS_C I dont see any Process Id for check generation. is it from F110? Can anybody plea

  • Can't Adjust Aux or Memory Voltage on R7850 PE/OC?

    I thought I recalled before I could drop down a box near the Core voltage and access Aux and Memory voltages as well. Can't seem to do that anymore: