Indesign CS5 (7.0.4) Crashes without any error message win xp

Hi All,
My indesign quits unexpectedly while i'm doing simple find and replace
var myDoc = app.activeDocument;
app.findGrepPreferences.findWhat = "~I|~i|~k|~h|~-";
app.changeGrepPreferences.changeTo = "";
myDoc.changeGrep();
Not for all file for some files. Any specific reason?  Any idea?
---Update:
By using GREP
I tried this manually
If I find ~I then also indesign quits unexpectedly.
By using Text find and change
^I  works well
Green4ever

Hi John,
Thanks for your answer...
I have tried that path, but in my "Application Data" folder there is no folder named "Dr Watson". So I am not able to see that log report. (I have restarted my machine) If you have time to check my indesign file I'll send it you personally.
Green4ever

Similar Messages

  • InDesign CS5 on MAC - ID Crashing (With Serious Error Message)

    After going into Document Setup with a document open, and changing the document orientation from landscape to portrait, InDesign CS5 crashes after clicking OK with an error message (see attached screen shot).  I've deleted the settings file by starting ID with Shift+Command+Option+Ctrl held down.  I ran some maintenance using the app OnyX (cleared caches, repaired permissions, etc.) Any idea what would cause this?  I've stopped short of reinstalling, but that may be the only option.  Also, I updated CS5 with the latest updates, and that didn't fix it either.

    At this point you may have corrupt recovery data that is preventing ID from starting if it crashes each time you try to launch it. Move everything out of the InDesign Recovery folder intoa safe place (you'll probably want to delete it later, but you don't know yet) and see if ID will launch. Then try opening any files that you were working on at the time of the first crash. Hopefully they aren't damaged and you've only lost work since the last save.
    If you have a crash report, pleast post it on pastebin.com, then put a link to it here.

  • I am using datasocket in seperate vi, with error catching, but network slowdown causes labview to crash without any error message ...

    I have a master computer setup as a datasocket server with several vi's that publish. I have about 5 other computers each with a vi that reads the data socket publisher. The interval at which the 5 vi's read is every 15 minutes, concurrently. It seems that when ever there is a network slow down, LabVIEW crashes catastrophically, even though I have timeouts in the datasocket readers. Is this error related to the datasockets not being able to handle the slow down or something else? Should I use another technique - if so - which is more reliable (FTP, TCP/IP?). This bug has been hounding me for several MONTHS.

    One thing I forgot to mention - the 5 datasocket readers are also web servers, serving out the front panels to the web after getting updated. Well, after weeks of trial and error, would you believe that if I turn off the web server logging, everything works fine. I have had it off for a week now and no crashes. I first discovered this by realizing that if I turned off the web server everything ran fine (which would be totally useless for my application), so then I searched this site and found an off the cuff remark about the web server logging function causing crashes for an unrelated problem. I figured what the heck, I'll disable it and see what happens. So far so good, I am still keeping my fingers crossed ...

  • EncoreDVD CS3 crashes without an error message - perhaps not enough RAM?

    Hi,
    my Encore DVD CS3 crashes without any error message!
    I made a DVD with a main menu and two submenus, one submenu for the chapters of my movie and the other submenu for a bonus part of my DVD. I'd linked all content to the buttons, except the videos of the bonus-submenu. When I tried to link them (therefore I used the flowchart), Encore just crashed - without sending any error message!
    I've only 1GB RAM in my iMac - perhaps it's simply not enough? Could this be the reason for the crash?
    Greetings, Micha

    Could be anything, not necessarily a memory issue, even though 1 Gig really isn't much by today's standards. It's imaginable that there is a problem with latching on to the chapter points and EN doesn't generate the list correctly. Could also be drawing issues for the pickwhip gizmo stuff... Hard to tell without sitting in front of the machine.
    Mylenium

  • My adobe Photoshop opens, loads full interface, then exits without any error message etc.

    My adobe Photoshop opens, loads full interface, then crashes without any error message etc.
    Help?

    If there is no error from the OS - then it did not crash, just exited.

  • Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

    Hello I Download Adobe Photoshop CC 2014 Last Night
     i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
    I Need Help Can You Resolve This Problem

    Lotfi are you receiving any error messages during the installation?  I would recommend reviewing your installation logs for errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors you discover to this discussion.

  • PO Approval stuck in error without any Error message

    Hi All,
    we have few notifications for PO Approval where they are stuck in error without any error message. they are also not showing in the worklist of the approver nor in the wf_notifications table. please help on this on how to solve this. we have done various options to solve the issue like skip/rewind/suspend/retry. but none of them works..... below is an extract of such an notification -
    Error in Workflow POAPPRV/3112-127925
    From SYSADMIN
    To Das, SD
    Sent 12-Dec-2011 16:55:01
    Closed 12-Dec-2011 17:07:30
    ID 164593
    Responder Das, SD
    An Error occurred in the following Workflow.
    Item Type = POAPPRV
    Item Key = 3112-127925
    User Key =429766-245
    Error Name =
    Error Message =
    Error Stack =
    Activity Id = 10770
    Activity Label = ROOT:POAPPRV_TOP
    Result Code = #STUCK
    Notification Id =
    Assigned User =
    Thanks,
    Sam D
    Edited by: Sam D on 12 Dec, 2011 1:45 PM

    Please post the details of the application release, database version and OS.
    Can you find any errors in the Workflow log file?
    All Purchase Orders or Requisitions Getting Stuck in Pre-Approved or In Process Status - Troubleshooting Checklist [ID 1104843.1]
    Troubleshooting for Requisitions / Purchase Orders in Process or Pre-Approved Status [ID 225017.1]
    Also, search MOS for (POAPPRV stuck) and go through the docs.
    Thanks,
    Hussein

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • Nokia Store Quits without any error messages.What ...

    My inbuilt Nokia store application within my Nokia Asha 305 keeps quiting without any error messages.What do i do to resolve this.I recently updated the S40 OS could that be the reason. And why?

    Just reset it to factory. That worked for me

  • Concurrent Program ends in Error without any error message - Apps 11.0.3

    Hi,
    We have a concurrent program which errors out sometimes without any error message in log file or anywhere else. This happens intermittently. Is there anyway to see why this happens ( to see error message somewhere else - like FND tables ?). Any feedback is appreciated. This happens in Oracle Apps 11.0.3.
    thanks
    Ram

    Ram,
    Is this a custom or standard concurrent program?
    Was this working properly before? If yes, what changes have been done recently?
    Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
    Regards,
    Hussein

  • Weird error without any error message

    I've been working on some actionscript 3 system. And all of a
    sudden, it wouldn't execute anymore. When I pushed CTRL-Enter in
    Flash CS3, a white screen would open up (instead of the normal
    flash program) and no trace-output would be given.
    Three hours later I found the cause of this weird problem.
    It's (simplified) the line:
    var value:Number = -(true ? 1 : 0); // This one doesn't work.
    Put this line in your script, and your entire program won't
    execute. And without any error message! I was wondering, why is
    that? By the way, the following lines do work:
    var a:Number = -(2*3+4); // Gives -10.
    var b:Number = (true ? 1 : 0); // Gives 1.
    var c:Number = -b; // Gives -1.
    var d:Number = 0-(true ? 1 : 0); // Gives -1.
    var e:Number = -((true ? 1 : -1) as Number);
    So, my guess is that the code (true ? 1 : 0) gives some sort
    of data type which is not a Number, and therefore doesn't except
    minus signs. But that wouldn't explain why it doesn't even give an
    error. So what IS wrong with it?

    ok - well if these numbers are used to begin the execution of
    a method in your file, it's likely that they are not firing up
    because the syntax here is incorrect. in order to use this type of
    conditional operator (which i do use quite often as well, handy
    convenient ;) the structure should be:
    var value:Number = (condition) ? 1 : 0;
    'true' is not a 'condition' but a boolean result, so it
    should not be evaluated in the way have been using it here -
    however 'true' is 'true' so the result will always be 1 (the first
    expression in the operator) - i'm not certain why you would need a
    -0 result and if you are always wanting a 'negative' number then
    use that number in the return expression, as in:
    var value:Number = (condition) ? -1 : 0;

  • Photoshop cs2 crashes and reboot windows xp without any error message when I try to open a file

    Hi,
    I downloaded the trial version (assessment for thirty days) of Adobe Photoshop cs2. Once installed the trial version, the program works correctly, except for a basic function: to open files and modify them. Any image files (jpeg-gif-png-tiff-bmp-psd) on press command FILE>OPEN, or Ctrl+O, to open it, sends the system in crash, and without any warning message, send to "restart" the operating system, in my case , windows xp.
    I use also photoshop cs, and it works correctly and allows to open file image also; but not with cs2.
    What's the problem?

    The error message I see in a Event Viewer after the program crashed is the following:
    Event Type: Error
    Event Source: Userenv
    Event Category: None
    Event ID: 1041
    Date: 22/03/2009
    Time: 09:05:52
    User: NT AUTHORITY\SYSTEM
    Computer: PENTA
    Description:
    Windows cannot query DllName registry entry for
    {CF7639F3-ABA2-41DB-97F2-81E2C5DBFC5D} and it will not be loaded. This is most likely caused by a faulty registration.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.

  • Flash Player 9 Crashes Without An Error Message

    Hello,
    Since I downloaded the latest update of Flash Player 9
    (december 2007?), my problems started. Flash Player 9 crashes (IE7)
    without an error message at sites like:
    Zoo Tycoon.com
    My own site
    And many more.
    To give you guys as much information as possible about the
    problem:
    - The first site shouldn't give a warning, and it didn't,
    till I downloaded the update of Flash Player 9. It now looks like
    this >
    Screen
    - The second site is my own site, which should look like this
    >
    Screen
    (Screen is made at an older PC, which hasn't got the update of FP9
    installed!)
    - It now looks like this>
    Screen
    (Screen is made at my current PC, Windows XP with the update
    installed.)
    - I also can't upload pictures at some sites, because they
    require Flash >
    Screen
    - Adobe says I've succesfully installed the latest version of
    Flash Player, version 9.0.115.0 >
    Screen
    My system is:
    - Microsoft Windows XP
    - Home Edition
    - Version 2002
    - Service Pack 2
    - Intel Pentium 4 CPU 3.00GHz
    - Clock Rate 3.01GHz, 1.50GB
    - Internet Explorer 7
    I'm now forced to use an older machine, Windows 2000, to
    update my site and view other sites, because that PC doesn't have
    the Flash Player update installed. ;)
    Things I tried to solve the problem:
    - Uninstall and reinstall
    - Read and tried all the Troubleshooters at this site
    - Adobe's uninstall program
    - SubInACL
    - Installed an older version of Flash Player (7 & 8)
    - Regedit
    - Manually renamed the files in the SYSTEM32/Macromed/Flash
    folder (like explained on the forum)
    Could someone please help me? I'm probably not the only one
    dealing with this problem...
    Regards,
    Sophie
    P.S.: I'm Dutch, so please don't mind my English....
    :)

    Is there no-one who knows the answer? And nobody who has the
    same problem? :(

  • Imac shuts down without any error message

    imac shuts down without any error message

    Need more details. Which iMac? Which OS? When does it shut down, under what circumstances? What are you doing when it happens? Is it reproducible, i.e. can you make it happen? Does it appear to be getting very hot before it shuts down?
    Open Console in Applications>Utilities and navigate to system.log. Do you see any messages related to shutdown from the time when this has happened? Enter "shutdown" in the filter field, upper right corner.

  • WL510 startup hangs without any error messages.

    I have installed WebLogic 510 on a Sun Sparc with Solaris 5.7
    following WebLogic installation guide(which I have used to
    successfully install other similar machines). We are using
    JDK 1.2.2_06(with the three necessary OS patches installed).
    When I try to start WebLogic from command line(see below)
    using script, it just hangs and sits there without giving any
    error messages. Is there anything obvious that I have missed?
    Thanks, Jim
    Command line I used to start WebLogic server
    (all in one line of course):
    /usr/java1.2/bin/java
    -native
    -ms64m -mx64m
    -classpath ./classes/boot:
    ./eval/cloudscape/lib/cloudscape.jar
    -Dweblogic.class.path=./license:
    ./classes:
    ./lib/weblogicaux.jar:
    ./myserver/serverclasses:
    /opt/oracle8/product/8.1.6/jdbc/lib/classes12.zip:
    /usr/local/j2sdkee1.2.1/lib/j2ee.jar
    -Dweblogic.home=.
    -Djava.security.manager
    -Djava.security.policy==/opt/weblogic/weblogic.policy
    weblogic.Server

    I think I've got a newer WebLogicLicense.xml format, i.e.
    version 6.0(it starts with:
    <?xml version="1.0"?>
    <bea-licenses>
    <license-group format="1.0" product="WebLogic Server" release="*">
    <license
    component="WebLogic"
    Is there a way to convert it back to 5.1.0
    format(so that it starts with:
    <!-- Keys for version 4.0 and later -->
    <WEBLOGIC-LICENSES>
    <LICENSE PRODUCT="WebLogic"
    Kumar Allamraju <[email protected]> wrote:
    That thread doesn't appear to be hanging. It's in Running
    state.
    Also have you tried to ping the server? Does WLS responds
    to ping commands?
    Jim Lee wrote:
    Here is the thread dump for the "main" thread:
    "main" (TID:0x3a3d0, sys_thread_t:0x3a308, state:R,thread_t: t@1,
    threadID:0x25
    118, stack_bottom:0xffbf0000, stack_size:0x20000) prio=5
    [1] weblogic.xml.license.BaseParser.sendCharacters(BaseParser.java:119)
    [2] weblogic.xml.license.WEBLOGICLICENSESParser.parse(WEBLOGICLICENSESParser.jav
    a:59)
    [3] weblogic.xml.license.BaseParser.parse(BaseParser.java:81)
    [4] weblogic.common.internal.LicenseInfo.loadXML(LicenseInfo.java:131)
    [5] weblogic.common.internal.ServerUtil.initLogging(ServerUtil.java:112)
    [6] weblogic.common.internal.ServerUtil.initLogging(ServerUtil.java:82)
    [7] weblogic.common.internal.ServerUtil.<clinit>(ServerUtil.java:75)
    [8] weblogic.t3.srvr.T3Srvr.checkAccess(T3Srvr.java:883)
    [9] weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:822)
    [10] java.lang.reflect.Method.invoke(Native Method)
    [11] weblogic.Server.startServerDynamically(Server.java:99)
    [12] weblogic.Server.main(Server.java:65)
    [13] weblogic.Server.main(Server.java:55)
    Kumar Allamraju <[email protected]> wrote:
    How do you know WLS was hanging?
    Did you tried to ping the server? Take a thread dump
    and
    post it here
    Jim Lee wrote:
    I have installed WebLogic 510 on a Sun Sparc with
    Solaris
    5.7
    following WebLogic installation guide(which I have
    used
    to
    successfully install other similar machines). We
    are
    using
    JDK 1.2.2_06(with the three necessary OS patches
    installed).
    When I try to start WebLogic from command line(seebelow)
    using script, it just hangs and sits there withoutgiving
    any
    error messages. Is there anything obvious that I
    have
    missed?
    Thanks, Jim
    Command line I used to start WebLogic server
    (all in one line of course):
    /usr/java1.2/bin/java
    -native
    -ms64m -mx64m
    -classpath ./classes/boot:
    /eval/cloudscape/lib/cloudscape.jar
    -Dweblogic.class.path=./license:
    /classes:
    /lib/weblogicaux.jar:
    /myserver/serverclasses:
    /opt/oracle8/product/8.1.6/jdbc/lib/classes12.zip:
    /usr/local/j2sdkee1.2.1/lib/j2ee.jar
    -Dweblogic.home=.
    -Djava.security.manager
    -Djava.security.policy==/opt/weblogic/weblogic.policy
    weblogic.Server

Maybe you are looking for