India Localization - Does it support IR / ISO across OUs

HI
Does India Localization support use of IR and ISOs between two different operating Units? we are on version R12.0.6
Regards,
Utkarsh
Edited by: Utkarsh on Sep 29, 2009 4:32 AM

just to correct myself. I had a short break and rewinded some years back to remember that NFS uses UDP (in fact sun RPC was developed to support NFS) and that sun RPC allowed both UDP and TCP. sorry about that:)
Meanwhile, I found out that Berkeley implemented their own version of RMI , one aspect of which is "UDP-RMI".
check it out at
http://now.cs.berkeley.edu/Millennium/groups/GRP_SIMS/annual.html
If you check SUN's RMI implementation code however you may confirm that they don't support UDP.
Nuno

Similar Messages

India Localization - Does it support use of IR / ISO accross OUs

HI
Does India Localization support use of IR and ISOs between two different operating Units? we are on version R12.0.6
Regards,
Utkarsh

I'm not clear on where you are seeing that text. When I view Google's cached page from the page found in this search
https://www.google.com/search?q=site%3Asitetrail.com%2Faskearth.com
It doesn't match yours exactly. There is an iframe with a Google map in it in the "Hosting Analysis" section, which in your pasted page seems to be the "Site Server" section.
Which Google site did you search?

My phone 4s does not support reliance gsm server in india pl help

my i phone 4s does not support reliance gsm server in india pl help

There is nothing we can do for you here. This is a user to user technical support forum. If you purchased a phone that does not work with your carrier, then you won't be able to use it. We can't help you.
Sorry,
GB

I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

Have you asked your mobile phone operator to turn on roaming for you? and if you have you will need to turn on DATA ROAMING on the iPhone by going to SETTINGS > GENERAL > MOBILE DATA and turn on DATA ROAMING. You should then be able to see the various Indian Networks listed in SETTINGS > CARRIER and be able to make/receive calls.
If you are in India and didn't ask for Roaming to be activated on your mobile account you're stuck until you return to the UK.
OR
If you have a 'locked' phone that is tied to the UK operator then you will need to find a phone shop that unlocks iPhones but beware this invalidates any Apple Warranty. If you are still in the UK then phone the mobile operator and ask then to unlock your iPhone which they usually do if its not in a contract with them or at the end of the contract period.
Hope that helps a little, Andrew

Does OATS support recording for Globalization and Localization?

We are looking to automate an EBS application that support 30 different languages and also has localization for some countries. Can we use OATS for regression automation? Does OATS support Globalization and Localization?

If you are testing web application, It requires to have webdom.api imported and reference scriptservice in the class.
import oracle.oats.scripting.modules.webdom.api.*;
public class script extends IteratingVUserScript {
@ScriptService oracle.oats.scripting.modules.webdom.api.WebDomService web;
Then you can reference in your script depending on the component that you are trying to drag. Below command will give you some idea on how to do it.
web.element("{{obj.Reservation.LTB Rate Code Select}}").dragTo("{{obj.Reservation.LTB Trip Composer Est Grand Total}}");
Thanks,
Sri

Okay, just tell me now that Mavericks does not support iMovie 6 HD which I have migrated across my devices since it first came out as iMovie 4. If this is true, then I will just jump off the nearest bridge, as I use it as a business.

Okay, just tell me now that Mavericks does not support iMovie 6 HD which I have migrated across my devices since it first came out as iMovie 4 and have supplemented with third party add ons from 3Gee. If this is true, then I will just jump off the nearest bridge, as I use it for my videography business. Since upgrading to Mav, I can not get the program to launch and am getting no pop up to tell me what is going on. It let me open and start a project at first, but then I was half way through and it crashed and I lost everything and now will not launch at all. Does anyone out there still use this magnificent program? Please help—the wedding I just commissioned is on hold and I am not want looking forward to facing a bridezilla.

right now just to get yer work done, get ahold of any OS that will run iM6HD and get it done. then dump MAVRICKS (wait till 10.9.2 at least) and retro back to OSX 10.6..or 10.7 (if you have it). I use FCExpress4 on 10.6....you might want to consider keeping a dedicated mini or something that ONLY runs your editing sw. I have 2 older machines that I will never upgrade because the editing SW wont run on the newwer OSs.
abuve all, be honest with your client. we all got kind of blindsided by this initial relese (like a bug infested matress).
ask if they have any apple stuff that has Mavricks probs. bridzillas only happen when they are out of the loop. Keep them informed. but ...also be ready to duck.
hope this helps.

India localization issues

Hi,
Can anybody let me know what issues are generally faced in case of inidia localization especially when global template (Eutopean country) is there. Ex. issues in CIN, TDS, Check printing etc. Further I would like to know that in India fiscal year is from April to March and if fiscal year of group company is Jan to Dec what would be the impact. What strategy is suggested so that global reporting and india reporting does not get distorted?
Thanks

There is no India Localization Forum on this portal
if you have any concerns, raise it to EBS Support
regards,
Vk...

I am told that my browser does not support iframes when trying to access a web site.

This is Google's cache of http://sitetrail.com/askearth.com. It is a snapshot of the page as it appeared on Sep 19, 2010 10:44:02 GMT. The current page could have changed in the meantime. Learn more
Full version These search terms are highlighted: history askearth com
* Contact Us
SiteTrail - Website News and Analysis
* Business
* Dev & Design
* Entertainment
* Mobile
* Social Media
* Tech
Search in SiteTrail askearth.com (visit site) This data was last updated 6 months ago (update data).
Site Profile Estimated Value: $5,582.16 USD Estimated Revenue: $7.60 USD per day $227.90 USD per month $2,772.81 USD per year Estimated Pageviews: 3,355 per day 100,648 per month 1,224,551 per year Alexa Rank: #447,581 Google Index: show google links Yahoo Index: show yahoo links Bing Index: show bing links History: show history Site Title: Interesting Questions - AskEarth Site Traffic
Site Server Server IP Address: 140.174.79.37 Server IP Decimal: -1934733531 Server IP Location: Pordenone, Friuli-Venezia Giulia, Italy
Your browser does not support iframes. Whois Information Welcome to the Network Solutions(R) Registrar WHOIS Server.
The IP address from which you have visited the Network Solutions Registrar WHOIS database is contained within a list of IP addresses that may have failed to abide by Network Solutions' WHOIS policy. Failure to abide by this policy can adversely impact our systems and servers, preventing the processing of other WHOIS requests.
To see the Network Solutions WHOIS Policy, click on or copy and paste the following URL into your browser:
http://www.networksolutions.com/whois/index.jhtml
If you feel that you have received this message in error, please email us using the online form at http://www.networksolutions.com/help/email.jsp with the following information:
Whois Query: askearth.com YOUR IP address is 174.129.155.56 Date and Time of Query: Tue Feb 23 00:49:37 EST 2010 Reason Code: IE DNS Records Host Class Type IP TTL Target Other askearth.com IN A 140.174.79.37 7199 askearth.com IN NS 7200 ns53.worldnic.com askearth.com IN NS 7200 ns54.worldnic.com askearth.com IN SOA 7200 mname: NS53.WORLDNIC.com rname: namehost.WORLDNIC.com serial: 108121504 refresh: 10800 retry: 3600 expire: 604800 minimum-ttl: 3600 HTTP Headers HTTP/1.1 302 Found Date: Tue, 23 Feb 2010 05:59:34 GMT Server: Apache/2.2.11 (Unix) mod_fastcgi/2.4.2 PHP/4.4.9 with Suhosin-Patch mod_ssl/2.2.11 OpenSSL/0.9.7m mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.7 Location: http://askearth.com/go/home Content-Length: 417 Connection: close Content-Type: text/html; charset=iso-8859-1
HTTP/1.1 200 OK Date: Tue, 23 Feb 2010 05:59:35 GMT Server: Apache/2.2.11 (Unix) mod_fastcgi/2.4.2 PHP/4.4.9 with Suhosin-Patch mod_ssl/2.2.11 OpenSSL/0.9.7m mod_apreq2-20051231/2.6.0 mod_perl/2.0.3 Perl/v5.8.7 Set-Cookie: id=11010246; EXPIRES=Sun, 01-Apr-29 00:00:00 GMT; PATH=/ Set-Cookie: pass=u0zit0yv; EXPIRES=Sun, 01-Apr-29 00:00:00 GMT; PATH=/ Set-Cookie: since=1266904775; PATH=/ Connection: close Content-Type: text/html Firefox Add-on SiteTrail Firefox Add-onPerform SiteTrail lookups via right-click menu straight from your web browser! Popular Lookups
* google.com#1
* facebook.com#2
* youtube.com#3
* yahoo.com#4
* live.com#5
* baidu.com#6
* wikipedia.org#7
* blogspot.com#8
* msn.com#9
Browse Lookups
A B C D E F G H I
J K L M N O P Q R S T U V W X Y Z Recent Lookups
* askearth.com#447,581
* evdenevenakliyatv.com#442,990
* mytaskhelper.com#756,476
* fikralari.net#639,299
* typemytape.com#1,547,530
* tmmod.info#1,078,434
* torrentplus.org#233,938
* communitycollegelistin...#430,008
* cadbury.co.uk#104,852
* myhobbyblogs.com#297,443
Random Lookups
* solidmastermind.com#931,183
* homelegance.com#277,584
* homepage-anleitung.de#1,091,134
* icicigroupcompanies.co...#1,513,887
* ptiboo.ch#744,058
* fachportal-paedagogik....#312,102
* lcpo.com#336,926
* spitinet.gr#904,561
* sportingpulse.com#37,069
* v-pillsbuyutucuhap.com#543,342
* sameskyboard.com#51,252
* alparslanpazarlama.com...#1,444,281
* ventausa.com#221,470
* dentalmag.org#234,937
* digitalfoci.com#1,214,872
* blank-label.com#273,247
* efun.ir#446,350
* greatamericandays.com#579,258
* it007.com#58,123
* hairyclipz.com#760,892
Navigation
* Contact Us
Categories
* Business
* Dev & Design
* Entertainment
* Mobile
* Social Media
* Tech
Recent News
* VP of Twitter Says Twitter is NOT A Social Network
* Google Puts White Spaces To Use
* YouTube Instant Experiment Gives Creator a Job At YouTube
* YouTube Time Machine – A New Website To Waste Hours On
* Google’s New Instant Search – Saving 11 Hours Every Second
* Facebook Notes Gets New Tools
Recent Lookups
* askearth.com#447,581
* evdennakliyateve.com#442,990
* mytaskhelper.com#756,476
* maximumwoman.com#639,299
* typemytape.com#1,547,530
* tmmod.info#1,078,434
© 2010 SiteTrail. All Rights Reserved.

I'm not clear on where you are seeing that text. When I view Google's cached page from the page found in this search
https://www.google.com/search?q=site%3Asitetrail.com%2Faskearth.com
It doesn't match yours exactly. There is an iframe with a Google map in it in the "Hosting Analysis" section, which in your pasted page seems to be the "Site Server" section.
Which Google site did you search?

Does SAP support Solaris 10 ZFS filesystem when using DB2 V9.5 FP4?

Hi,
I'm installing NW7 (BI usage). SAPINST has failed in the step "ABAP LOAD due to the DB2 error message
"Unsupported file system type zfs for Direct I/O". It appears my Unix Admin must have decided to set these filesystems as ZFS on this new server.
I have several questions requiring your expertise.
1) Does SAP support ZFS filesystems on Solaris 10 (SPARC hardware)? I can not find any reference in SDN or Service Market Place? Any reference will be much appreciated.
2) How can I confirm my sapdata fielsystems are ZFS?
3) What actions do you recommend for me to resolve the SAPINST errors? Do I follow the note "Note 995050 - DB6: NO FILE SYSTEM CACHING for Tablespaces" to disable "Direct I/O" for all DB2 tablespaces? I have seen Markus Doehr's forum Link:[ thread|Re: DB2 on Solaris x64 - ZFS as filesystem possible?; but it does not state exactly how he overcame the error.
regards
Benny

Hi Frank,
Thanks for your input.
I have also found the command "zfs list" that would display any ZFS filesystems.
We have also gone back to UFS as the ZFS deployment schedule does not meet this particular SAP BW implementation timeline.
Has any one come across any SAP statement that states NW7 can be deployed with ZFS for DB2 database on Solaris SPARC platform. If not, I'll open an OSS message.
regards
Benny

Windows 8.1, BootCamp does not find the ISO image.

When I try to install Windows 8.1, BootCamp does not find the ISO image.
I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
"The installer disc could not be found – Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

Dear Loner T,
thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and again recorded:
The execution of BootCamp, was perfect
Thank you for attention to my problem!

India Localization Patching 11i

Hi,
Recently we got a request for applying India Localization Patch 8266575 and have a few questions:
Question 1:*
When we go into the Readme of the Patch it talks about having patch 6491231 (India Localization Patch Application Tool) and apply the requested patch 8266575 with only with this tool.
Extract From Readme:
If you have applied the patch 6491231 from metalink (India Localization Patch Application Tool), you should be able to apply this patch using that tool.
My question is how do we check the current India Localization Patch Application Tool version (i.e. patch version).
Question 2:*
Also the section "File Application Version" portion same readme talks of a script. Do we need to run the script once the patch is applied.
Extract From Readme:
File Application instructions
*=============================*
*## For the sql files listed below (if any), apply in respective schemas as given.*
- sqlplus APPS/<apps_pwd> @patch/115/sql/ja_in_po_hdr_vendor_upd_trg.sql
Question 3:*
Also please let me know if need to down the application tier services when applying "India Localization Patch"
Please help us me out.
Regards,
Karthik Chandran

Hi Hussein,
Thanks for the update.
With regards to the version that I was talking about what I want to know if I need to apply the patch 6491231 (PATCH TOOL) or not.
Fotr this I would like to know if the patch 6491231 is applied or if a higher version of the patch tool exists or if the patch tool is lower than the version provided in the patch 6491231.
The version checking portion of the patch 8266575 gives version of the file that the patch is going to update.
-bash-3.00$ sqlplus apps/<PASSWORD> @jai_8266575.sql
SQLPlus: Release 8.0.6.0.0 - Production on Wed Nov 7 09:49:34 2012*
*(c) Copyright 1999 Oracle Corporation. All rights reserved.*
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
JA_IN_PO_HDR_VENDOR_UPD_TRG;;en;;$Header: ja_in_po_hdr_vendor_upd_trg.sql 115.8.6107.1 2007/02/08 16:05:34 rallamse noship
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
-bash-3.00$
I believe that the script *"@patch/115/sql/ja_in_po_hdr_vendor_upd_trg.sql"* takes a backup of the files being changed by the patch.
As such I am presuming that the script needs to run prior to the patch. Could you please confirm if I am correct.
Also the user manual does not talk about bringing down the any services or not bringing down the services. As such please advice.
This is the first time I am applying this type of patch as such the questions & confusion.
Would appreciate any further inputs into the matter.
Regards,
Karthik Chandran

India localization from 11i to R12

Hi,
We have India localization in 11i. Now, we have upgraded to R12.1.3.
From DBA perspective, Is the below step enough to do in R12 for India localization?
Latest Oracle HRMS Legislative Data Patch Available (HR Global / hrglobal) (Doc ID 145837.1)
As per this, need to apply patch 12730429 and then followed by Datainstall and running hrglobal.drv
Let me know if anything needs to be done apart from this.
Regards,
RKA

Hi,
Thanks. We followed the steps as per Doc ID 954143.1.
Also, We installed all preinstall patches as per
Pre and Post Upgrade Requirements from 11i to R12.1 for Oracle Financials for India (India Localization) (Doc ID 1590646.1)
But, Still after upgrade we are havings issues like TDS year is not migrated, Access some forms has errors saying "Table does not exist".
Can you please let us know what are the other steps needs to be performed apart from installing preinstall patches before upgrade with respect to India localization?

India localization receipt error, import standard purchase order interface

Hi
I created PO using PO interface and then imported PO in Incomplete status. Now after applying taxes(India localization) i send it for approval and then tried creating receipt. at this point i got an error message which is about trigger JAI_RCV_RT_BRIUD_T1 and some routine and all.
After doing little diagnostic here and there, i found that If i create Manual PO and apply Taxes i.e. Open Purhcase Order(Localized) select line level click on "Taxes" and apply a Tax on it and precedence, just after "Rate" there is a field of Curr which is defaulted with INR.
In case of Import PO, at order localized form when I apply Tax, the field Curr is Null.
Now when I somehow put currency INR in imported PO(by making that field editable and taking INR from LOV) everything goes smooth.
So my doubt is, why INR is not coming by default at Tax screen at PO localized form when i create PO using interface.

Hi
Do you have a copy of your insert statement?
regards

The document is on a volume that does not support permanent version storage

Hi All
I am using Mountain Lion version and i am receiving The document is on a volume that does not support permanent version storage when trying to save a text file on to my QNAP ( Netwrok Storage).
I have done littel research and aparently this is to do with MAC OS, how ever i was wondering if anyone know any ways around this ? or will this be fixed ?
Thanks in adavance.

Mate
That is not what i am saying, if you read my post you will see that this USE to work and it stoped working since mac os 10.8
This does seem to be Apple problem if you read this article
http://support.apple.com/kb/TS4218
the issue i am having is this .
if i create a text file in windows with notepad and save it on a nas drive.
inside a text file i will have
this is a test
i go to my mac open the text file with textedit and add following text in new line
this is test 2
now i go back to windows box open same text file you will see that following
this is a testthis is test 2
basicly what it does it puts it on same line as the first line.
and this all use to be fine before 10.8.2
I am sorry if i came across rude i just need some help.

Server does not support remote panels, server overwhelmed

After an unknown amount of connections to remote panels, I recieve the "server does not support remote panels" error. Often times it will further say server is overwhelmed. It seems like sometimes we can have almost 100 succesful connections without the error and sometimes just only 10.
Ive combed over all other similar posts regarding this error and most others seem to have an issue with the initial connection, not after numerous succesful connections.
This error can be resolved by restarting labview; however, restarting means interupting some physical processes that are running in our warehouse. Is there a way to locate and empty this log that appears to be overwhelming the server?

Thanks for the reply.
Using Labview 2013 Full Development on windows server 2008. IO communication done through compact field point modules. All remote computers used to access remote VIs have been loaded with the correct runtime engine. The issue seems to happen on the server end because once it happens, all remote computers get the same message, instead of one isolated computer having an issue.
There doesn't really seem to be a pattern to this error occuring(to my knowledge). Sometimes we can go a week or two without seeing it, other times, a few days. We upgraded to labview 2013 and the new server almost a year ago. This error didn't start happening until after about 4 or so months of use.
I came across this knowledgebase earlier this week and have verified that all of our settings are correct.
Thanks again for the reply!

India Localization - Does it support IR / ISO across OUs

Similar Messages

Maybe you are looking for