Individual Posting of line items for GR of Subcon Mat'ls
We currently have subcon transactions with outside suppliers wherein we provide rawmaterial1 and rawmaterial2 to produce finished goods. The supply of rawmaterial1 is not stable, thus, in the absence of rawmaterial1, we provide rawmaterial2 to vendor. BOM of the finished goods either contains i) rawmaterial1 only or ii) rawmaterial1 plus rawmaterial2.
Note that, rawmaterial2 is used as subsitute for rawmaterial1 if the latter is not available. For better ilustrations:
If BOM of finished good under subcon has rawmaterial1 only as component:
Warehouseman GR-ed the finisheg good received without consumption for rawmaterial1 since there is no rawmaterial1 provided to vendor. They can not consume the rawmaterial2 used since there is no option during GR to do single item entry for rawmaterial2.
If BOM of plastic material under subcon has rawmaterial1 and rawmaterial2 as component:
Warehouseman GR-ed the finished good received with consumption of rawmaterial2 ONLY since there is no rawmaterial1 provided to vendor. But rawmaterial2 consumed in the system is based only on the quantity computed by system based on BOM. This is understated since rawmaterial2 is also used to compensate for the lack ok rawmaterial1.
Is posting, e.g. single item entry for the use of alternative materials during GR of subcon materials allowed?
We would like to know your thoughts on how we can resolve these issues.
Thank you very much!
Dear Barrie,
we had a similar problem and SAP has implemented the OSS-Note 1273522 in order to solve it. It may solve yours, as well. Please check it out.
Regards,
Zeliha
Similar Messages
-
FB60 - Two line items for tax amount (Posting Key - 50)
Hi,
I am facing some issue in FB60 invoice posting. For the same vendor(say V1) I am posting 2 different invoices for 100 USD - the <u>company code, G/L, CostCenter & Tax Jursdiction code are different</u> in both the cases. Once I do FB60 and got to document overview screen this is what I see...
<b>Case1</b> - in the document overview screen I see a Posting key(PK) 31(invoice amount), PK50(tax amount) & PK40(total amount)...which is fine.
<b>Case2</b> - in second case the document overview shows two line items for PK50(credit - tax amount) and tax amount is different.
Two questions...
1) Why there are two tax items (PK50 items) - is that dependent on tax rule or vendor or company code?
2)My client says the tax amount should be same in both cases - but I am wondering how can it be, when tax codes are different in both the cases? Where can I check how these tax values are getting calculated.
Any adivse/hints will be greatly appreciated/rewarded.
Thanks
KiranAKu
I got the same scenario also
this second document display because of material price change u can double click that document -
Single line item for multiple line item payment.
Hi
I have booked the 3 vendor invoices (in FB60) for a single vendor. Now today i paid (with F-53) all the three invoices together. One payment document number was generated.
However when i saw the vendor line item, i saw that three debit line items was generated for the clearing the open invoices (i..e 3 credit line items). so when i say vendor line item report, there were total 6 cleared line items (3 for credit i.e invoice and 3 for debit i.e. payments)
But is it possible to get single debit line item for all the three invoices cleared. If yes, please let me know how i can get it.
If i will have one single line item for payment, vendor report would be simpler. Please helpHi,
1. If you do payment through F-53, then each invoice have separate payment line item. This is not avoidable. If you do payment through F110, then you can group the line items for payment, so there only one payment line item for many number of invoices.
2. While clearing through F-44, system is generating automatic line items because, there are exchange rate fluctuations. You can't avoid these line items, as these automatic line items only match Debit and Credit amounts in order to post the document.
Rgds
Murali. N -
Missing Line items for CO-PA "BAPi_ACC_DOCUMENT_POST"
Hi Every one,
I am facing a problem while posting the documents using the standard "BAPI_ACC_DOCUMENT_POST". Problem is, if I have a multiple line items to be posted, BAPI is posting only a part of them and throwing the other documents into error with an error message "Missing Line items for CO-PA" or "inconsistency between a document field and prof. segment number" .
Program is handling the errors in another internal table and displaying them on output report.
When we re-run the program with same parameters, it is posting the some part of the residue and throwing some documents into error. So to clear out all the documents I need to run the Program for multiple times.
Any one can help me out in solving this Problem.Hello Prashanth ,
there are 2 structures I think you should fill
CRITERIA (ref structure BAPIACKEC9 )
VALUEFIELD( ref STRUCTURE BAPIACKEV9) in BAPi_ACC_DOCUMENT_POST
hope this helps... -
Single line item for multiple open items in app
we have three open items to vendor x 100001000010000
But we are paying to vendor only 10000100005000
At the time of entry system showing
Vendor account 25000
To Bank account 20000
To Bank account 5000(here we paying partial amount of 3rd open item)
But my Clint requirement is system should post only single line item for bank account 25000 for reconcilation purpose
Would you please suggest where we need to do customization?Hi Anantha,
How are you making the payment which transaction you are using ? Both Manual & Automatic payment
the suggested solution is go for split payment terms. configure using OBB8 and OBB9
Hope this helps
pbb -
Transaction KSB1 - Display Actual Cost Line Items for Cost Centers
Hi,
When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
- Buildings
- PC & Small Applications
On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
Could you please help!
Thanks,
- DekiHi Murali,
I have one depreciation expense account (P/L Account) which is also a cost element.
During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
- Buildings
- PC & Small Applications
Any thoughts on why the above aren't showing?
Thanks! I really appreciate your help!
- Deki -
Plan cost line items for cost centers report
Hello,
I am displaying the report: Plan cost line items for cost centers and when I display the details of a line item it appears a document number, where could I display this document?
I have tried to display it in FB03 transaction but it seems not to be this kind of document.
On the other hand in the field Business transaction it appears RKP6, what is the meaning of this field?
Thank you very muchHi Beatriz Amezua ,
For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
RKP6 means "Planning Activity Dependent Costs"
Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups -- Display Groups
Srikanth Munnaluri -
Line items for the PO are not automatically displayed
Hi all,
When attempting to post an invoice against PO, the line items for the PO are not automatically displayed. When we went to the Listing of PO's and brought this up, we noticed under the "invoice"tab that the: Invoice Receipt & GR-BsdIV is checked.
need your help
Thanks
FayazHi,
Can you check delivery complete indicator in PO. It is in PO item details delivery tab.
In MIRO transaction, select the tab Purchase order/scheduling agreement, enter PO number and press enter.
Right hand side select the layout all information .
Regards,
Chandra -
Separate line item for taxes in accounting document of MIGO
All SAP Gurus,
As we can have separate line item for Freight amount (Freight amt credited) in accounting document for MIGO.
Similarly is it possible to have separate line item for tax amount which is inventoried.
Regards,Hi Rajan,
Freight is from pricing procedure whereas tax is from taxing procedure.
Tax cannot be shown in separate g/l in MIGO.
Reason:
If u wanna show tax as separate item then we need to debit tax a/c in migo as well as it has to go to inventory which is not possible(double accounting enrty on debit side).
I too tried to do the same by specifying 2 for posting indicator and selecting non deductible for the nonsetoff account key used in the taxing proceudre in OBCN but it is behaving like setoff tax.
U can also try doing the same and then check.
Reg
Raja -
How to reset already posted GL line item attributes
Hi Experts,
I have an issue with GL line items for Bank clearing account. At the time of conversion posted the line items in bank clearing account which are not open items and also not cleared items. Now I want to make it as open items in order to clear from this account.
Please share your experiences and thoughts.
Thanks in advance.
Regards
AdityaDear:
What i understood from your query is. You had a Bank Clearing account which formerly was not maintained on Open item basis. However you converted it to OIM management latter on. Now you have old entries standing in this account that belongs to period before OIM was turned on .. Am i right? If this is so then answer is you can only clear those entries on Open item basis in F-03 or in any other t code for open item processing which were posted on or after OIM was turned on. This is for your information.
Regards -
More than 999 line items for an FI Document
Hello All,
Per SAP standard, an accounting document can only contain up to 999 line items. However, we have Logistics posting (Backflush) that would yield more than 999 line items in FI. We can't opt for setting summarization in transaction OBCY (FI Summarization based on Object Type) since this would affect GR/IR clearing. We can select reference transaction key MKPF (Material Doc Table) and table BSEG (Field MENGE <Qty>) but GR/IR clearing would be affected since definition of clearing is at Purchasing Doc (EBELN) and Item (EBELP).
Do you have other recommendations?
Thanks.Dear scorpio0485,
Yes ! I have already done posting for morethan 999 line items. but in the standard program we cant do it. We need to go for Z process.
In Zprocess we need to put one cut off line item for ex : 900 or 950. After that hardcode one GL code(clearing GL Code) in program to split the line items. Means the system generates 2 documents.
Please give the following Code to ABAPer
AT END OF xblnr.
mtab[] = ttab[].
CLEAR v_count1.
DESCRIBE TABLE ttab LINES v_lines.
LOOP AT ttab INTO wa_ttab.
v_tabix = sy-tabix.
v_count = v_count + 1.
IF v_count EQ 900.
count = count + 1.
v_count1 = v_count + v_count1.
MOVE-CORRESPONDING wa_ttab TO wa_xtab.
IF v_wtotal < 0.
wa_xtab-newbs = '40'.
wa_xtab-newko = '00003100001'.
ELSE.
wa_xtab-newbs = '50'.
wa_xtab-newko = '00003100001'.
ENDIF.
IF v_dtotal < 0.
wa_xtab-newbs = '40'.
wa_xtab-newko = '0003100001'.
ELSE.
wa_xtab-newbs = '50'.
wa_xtab-newko = '0003100001'.
ENDIF.
IF v_dtotal LE 0.
v_dtotal = v_dtotal * -1.
ENDIF.
IF v_wtotal LE 0.
v_wtotal = v_wtotal * -1.
ENDIF.
wa_xtab-prctr = '0000900008'.
wa_xtab-dmbtr = v_dtotal .
wa_xtab-wrbtr = v_wtotal .
If you need anymore,please let us know -
Seperate Line item for taxes in MIGO and MIRO
All SAP Gurus,
We want to inventories the CST (central sales tax) amount.
For this we have used the condition type JIPS, check marked the accounting key 'JI7' and gave posting indicator as '2' Separate line item.
Now, CST amount is getting inventorised at the time of GR. (but no separate line item is created at the time of GR).
During MIRO, the inventoried CST amount is getting deinventorised (although separate line item being created here).
Can we have separate line item in MIRO, without getting value deinventorised? (as it happens for freight)
Regards,Hi Kunal,
Thanks for the reply.
As you have rightly said, we need to tick 'NOT DEDUCTIBLE' in OBCN (we have already did that).
And key has been already assigned in Atx procedure for the appropriate condition type.
But the problem is that, we want separate line item for this tax amount in MIGO.
Is it possible to have separate line item for the tax amount in MIGO (as we can get separate line item for freight in MIGO).
Regards, -
Item Message text LTxt 2A Message(s) when structuring line items for
Hi ,
Please can any body help on this below errror message.
At the time of executing depreciation (AFAB) we are getting below error message.
Item Message text LTxt
2A Message(s) when structuring line items for document number ERROR00001
2A Account 'Accumulated dep. account unpl. deprec.' could not be found for area 01
END Error messages after processing of assets
END Posting run ended with errors
Please can any body help on this issue.
Thanks in advance for your help.
Edited by: seshu_sapfico on Nov 2, 2009 5:12 PMHi Seshu
Please go to T-code AO90 and assign an accumulated depreciation account .
To find the correct place , check your asset class and check which account determination you have in it.
Once you know your account determination go to T-code AO90
enter chart of depreciation
double click on account determination on left hand side of screen
click on correct account determination on right hand side
double click on depreciation a/c on left hand side
and enter your g/l for Acc.dep. accnt.for ordinary depreciation
hope this should solve your problem
Thanks and regards
Sanjeev -
Commitment line items for cost centers - KSB2
Hi all,
- PO#450118888
- Client is working in transaction code KSB2 (Commitment line items for cost centers)
- Client states that PO shows a different amount or that line item 2 does not show at all in KSB2.
Please guide me what is the solution for this and where I need to check
Thanks and Regards,
KumarHi Beatriz Amezua ,
For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
RKP6 means "Planning Activity Dependent Costs"
Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups -- Display Groups
Srikanth Munnaluri -
Hi
I am facing an issue while posting the vendor invoice. When posting the vendor invoice, system is automatically creating a debit entry to TDS account for Ecess, whereas the other Line items for TDS are created correctly. We have maintained the posting keys, and the account assignment is also there for both debit and credit parts. The tax code and tax types are correctly assigned to the vendor master and the rates maintained are also correct. The system is giving this error for the particular tax code for INV and PAY for one particular section, say Sec 194H
Regards
Sanil BhandariHi Sanil,
In CIN, surcharges like Education Cess are automatically shown separately from the basic taxes and are over and above the basic withholding tax, why because this is mandatory as per IT Act. For that to function, please check IMG>Tax deducted at Source>EWT>Calculation of Surcharges, to see whether you have maintained settings for separate line item.
S Jayaram
Maybe you are looking for
-
Phone service was not suspended while deployed
I left for my deployment to Afghanistan in October of 2013 about a week before I left I brought in a copy of my orders and told them I needed it suspended from November 1st to April 1st. They looked over my orders and said not a problem, typed some
-
I am having an issue on hub transport servers running Exchange 2010 SP3 RU6. Where some journaled meeting request related messages (acceptances, etc.) get stuck in the Submission queue. The error is: 400 4.4.7 The server responded with: 550 5.6.0 M
-
V.V.Urgent( IDOC to SOAP)
Hi, I am Integrating SAP R/3 and WebBrowser using XI. In SAP R/3 I am Using IE02( Change Equipment) ,When Ever we made a change in Equipment and save it should trigger automatically and post the data. I need the Infpirmation How to Trigger Automatic
-
I installed lightroom CC 2015 but it dues not start up
After installation I restarted the system but still can't start lightroom
-
I have a .pdf file made by GNUCash that cannot be viewed by Adobe Reader Ver. 9/Vista. It can be viewed just fine in versions 7 and 8 and with .pdf viewers under Linux. What is the problem and how do I fix it?